[U-Boot] [PATCH 14/52] imx8m: update imx-regs for i.MX8MM

[peng.fan at nxp.com]

From: Peng Fan <peng.fan at nxp.com>

i.MX8MM has similar architecture with i.MX8MQ, but it has totally
different PLL design and some register layout change.

Note: Some registers in this file are not updated because not used now.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/include/asm/arch-imx8m/imx-regs.h | 75 ++++++++++++++++++++++++++++--
 1 file changed, 71 insertions(+), 4 deletions(-)

diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h
index 68666a535b..a5be2e85da 100644
--- a/arch/arm/include/asm/arch-imx8m/imx-regs.h
+++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h
@@ -10,8 +10,8 @@
 
 #include <asm/mach-imx/regs-lcdif.h>
 
-#define ROM_VERSION_A0		0x800
-#define ROM_VERSION_B0		0x83C
+#define ROM_VERSION_A0		IS_ENABLED(CONFIG_IMX8MQ) ? 0x800 : 0x800
+#define ROM_VERSION_B0		IS_ENABLED(CONFIG_IMX8MQ) ? 0x83C : 0x800
 
 #define M4_BOOTROM_BASE_ADDR	0x007E0000
 
@@ -93,7 +93,11 @@
 #define SEMAPHOR_HS_BASE_ADDR	0x30AC0000
 #define USDHC1_BASE_ADDR	0x30B40000
 #define USDHC2_BASE_ADDR	0x30B50000
+#ifdef CONFIG_IMX8MM
+#define USDHC3_BASE_ADDR	0x30B60000
+#else
 #define MIPI_CS2_BASE_ADDR	0x30B60000
+#endif
 #define MIPI_CSI_PHY2_BASE_ADDR	0x30B70000
 #define CSI2_BASE_ADDR		0x30B80000
 #define QSPI0_BASE_ADDR		0x30BB0000
@@ -120,7 +124,8 @@
 #define USB1_PHY_BASE_ADDR	0x381F0000
 #define USB2_PHY_BASE_ADDR	0x382F0000
 
-#define MXS_LCDIF_BASE		LCDIF_BASE_ADDR
+#define MXS_LCDIF_BASE		is_enable(CONFIG_IMX8MQ) ? \
+					0x30320000 : 0x32e00000
 
 #define SRC_IPS_BASE_ADDR	0x30390000
 #define SRC_DDRC_RCR_ADDR	0x30391000
@@ -149,6 +154,9 @@
 #define SRC_DDR1_RCR_CORE_RESET_N_MASK	BIT(1)
 #define SRC_DDR1_RCR_PRESET_N_MASK	BIT(0)
 
+#define IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK 0x2000u
+#define IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_SHIFT 13
+
 struct iomuxc_gpr_base_regs {
 	u32 gpr[47];
 };
@@ -205,6 +213,7 @@ struct fuse_bank1_regs {
 	u32 rsvd3[3];
 };
 
+#ifdef CONFIG_IMX8MQ
 struct anamix_pll {
 	u32 audio_pll1_cfg0;
 	u32 audio_pll1_cfg1;
@@ -239,6 +248,60 @@ struct anamix_pll {
 	u32 frac_pllout_div_cfg;
 	u32 sscg_pllout_div_cfg;
 };
+#else
+struct anamix_pll {
+	u32 audio_pll1_gnrl_ctl;
+	u32 audio_pll1_fdiv_ctl0;
+	u32 audio_pll1_fdiv_ctl1;
+	u32 audio_pll1_sscg_ctl;
+	u32 audio_pll1_mnit_ctl;
+	u32 audio_pll2_gnrl_ctl;
+	u32 audio_pll2_fdiv_ctl0;
+	u32 audio_pll2_fdiv_ctl1;
+	u32 audio_pll2_sscg_ctl;
+	u32 audio_pll2_mnit_ctl;
+	u32 video_pll1_gnrl_ctl;
+	u32 video_pll1_fdiv_ctl0;
+	u32 video_pll1_fdiv_ctl1;
+	u32 video_pll1_sscg_ctl;
+	u32 video_pll1_mnit_ctl;
+	u32 reserved[5];
+	u32 dram_pll_gnrl_ctl;
+	u32 dram_pll_fdiv_ctl0;
+	u32 dram_pll_fdiv_ctl1;
+	u32 dram_pll_sscg_ctl;
+	u32 dram_pll_mnit_ctl;
+	u32 gpu_pll_gnrl_ctl;
+	u32 gpu_pll_div_ctl;
+	u32 gpu_pll_locked_ctl1;
+	u32 gpu_pll_mnit_ctl;
+	u32 vpu_pll_gnrl_ctl;
+	u32 vpu_pll_div_ctl;
+	u32 vpu_pll_locked_ctl1;
+	u32 vpu_pll_mnit_ctl;
+	u32 arm_pll_gnrl_ctl;
+	u32 arm_pll_div_ctl;
+	u32 arm_pll_locked_ctl1;
+	u32 arm_pll_mnit_ctl;
+	u32 sys_pll1_gnrl_ctl;
+	u32 sys_pll1_div_ctl;
+	u32 sys_pll1_locked_ctl1;
+	u32 reserved2[24];
+	u32 sys_pll1_mnit_ctl;
+	u32 sys_pll2_gnrl_ctl;
+	u32 sys_pll2_div_ctl;
+	u32 sys_pll2_locked_ctl1;
+	u32 sys_pll2_mnit_ctl;
+	u32 sys_pll3_gnrl_ctl;
+	u32 sys_pll3_div_ctl;
+	u32 sys_pll3_locked_ctl1;
+	u32 sys_pll3_mnit_ctl;
+	u32 anamix_misc_ctl;
+	u32 anamix_clk_mnit_ctl;
+	u32 reserved3[437];
+	u32 digprog;
+};
+#endif
 
 struct fuse_bank9_regs {
 	u32 mac_addr0;
@@ -258,11 +321,13 @@ struct src {
 	u32 usbophy2_rcr;
 	u32 mipiphy_rcr;
 	u32 pciephy_rcr;
+	/* Exits on i.MX8MQ */
 	u32 hdmi_rcr;
 	u32 disp_rcr;
 	u32 reserved2[2];
 	u32 gpu_rcr;
 	u32 vpu_rcr;
+	/* The following four exits on i.MX8MQ */
 	u32 pcie2_rcr;
 	u32 mipiphy1_rcr;
 	u32 mipiphy2_rcr;
@@ -285,6 +350,7 @@ struct src {
 	u32 gpr10;
 	u32 reserved5[985];
 	u32 ddr1_rcr;
+	/* Exist on i.MX8MQ */
 	u32 ddr2_rcr;
 };
 
@@ -459,7 +525,8 @@ struct bootrom_sw_info {
 	u32 reserved_3[3];
 };
 
-#define ROM_SW_INFO_ADDR_B0	0x00000968
+#define ROM_SW_INFO_ADDR_B0	(IS_ENABLED(CONFIG_IMX8MQ) ? 0x00000968 :\
+				 0x000009e8)
 #define ROM_SW_INFO_ADDR_A0	0x000009e8
 
 #define ROM_SW_INFO_ADDR is_soc_rev(CHIP_REV_1_0) ? \
-- 
2.16.4