July 2019 Archives by author
Starting: Mon Jul 1 03:36:24 UTC 2019
Ending: Wed Jul 31 22:27:30 UTC 2019
Messages: 4738
- [U-Boot] [PATCH] mmd: sdhci: fix non GPIO card detect
Faiz Abbas
- [U-Boot] [PATCH] mmd: sdhci: fix non GPIO card detect
Faiz Abbas
- [U-Boot] [PATCH] mmd: sdhci: fix non GPIO card detect
Faiz Abbas
- [U-Boot] [PATCH 0/2] Enable booting from VirtIO PCI connected storage
David Abdurachmanov
- [U-Boot] [PATCH 1/2] qemu-riscv: enable VIRTIO_PCI
David Abdurachmanov
- [U-Boot] [PATCH 2/2] distro_bootcmd: refactor virtio to support PCI block devices
David Abdurachmanov
- [U-Boot] [RESEND PATCH] distro_bootcmd: refactor virtio to support PCI block devices
David Abdurachmanov
- [U-Boot] [PATCH v10 3/4] riscv: sifive: fu540: Sync-up config header with RISC-V QEMU support
David Abdurachmanov
- [U-Boot] [PATCH v2 04/18] Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig
David Abdurachmanov
- [U-Boot] [PATCH] sunxi: dts: a64-olinuxino: Fix regression to eMMC support
Sunil Mohan Adapa
- [U-Boot] Boot Linux using EFI environment from u-boot
Poonam Aggrwal
- [U-Boot] Boot Linux using EFI environment from u-boot
Poonam Aggrwal
- [U-Boot] Boot Linux using EFI environment from u-boot
Poonam Aggrwal
- [U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode
Stefan Agner
- [U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode
Stefan Agner
- [U-Boot] [PATCH 0/4] Make some changes to SDP
Angus Ainslie
- [U-Boot] incorrect include/config.h causes?
Amos, Brian J
- [U-Boot] [PATCH] MAINTAINERS: Remove Macpaul and add Rick as nds32 maintainer
Andes
- [U-Boot] [PATCH v2 0/7] Support Andes RISC-V l2cache on AE350 platform
Andes
- [U-Boot] [PATCH v2 1/7] dm: cache: Add enable and disable ops for cache uclass
Andes
- [U-Boot] [PATCH v2 2/7] dm: cache: add v5l2 cache controller driver
Andes
- [U-Boot] [PATCH v2 3/7] riscv: ae350: use the v5l2 driver to configure the cache
Andes
- [U-Boot] [PATCH v2 4/7] riscv: ax25: add imply v5l2 cache controller
Andes
- [U-Boot] [PATCH v2 5/7] riscv: cache: Flush L2 cache before jump to linux
Andes
- [U-Boot] [PATCH v2 6/7] riscv: dts: move out AE350 L2 node from cpus node
Andes
- [U-Boot] [PATCH v2 7/7] riscv: ax25: use CCTL to flush d-cache
Andes
- [U-Boot] [PATCH] remoteproc: Fix potential build issues with SPL remoteproc
Suman Anna
- [U-Boot] [PATCH] arm: dts: k3-am654-base-board: Fix cpsw_nuss power-domains property
Suman Anna
- [U-Boot] [PATCH 0/2] Disable K3_SYSTEM_CONTROLLER on K3 Arm64 cores
Suman Anna
- [U-Boot] [PATCH 1/2] configs: am65x_evm_a53: Disable K3_SYSTEM_CONTROLLER
Suman Anna
- [U-Boot] [PATCH 2/2] configs: j721e_evm_a72: Disable K3_SYSTEM_CONTROLLER
Suman Anna
- [U-Boot] [PATCH 1/2] configs: am65x_evm_a53: Disable K3_SYSTEM_CONTROLLER
Suman Anna
- [U-Boot] [U-Boot-Board-Maintainers] [U-Boot-Custodians] [ANN] U-Boot v2019.07-rc4 released
Neil Armstrong
- [U-Boot] [PATCH] board: amlogic: vim: Fix README
Neil Armstrong
- [U-Boot] [PATCH] board: amlogic: vim: Fix README
Neil Armstrong
- [U-Boot] [PATCH 0/3] video: add support for EDID timings validation
Neil Armstrong
- [U-Boot] [PATCH 1/3] edid: add edid_get_timing_validate() variant to filter out edid modes
Neil Armstrong
- [U-Boot] [PATCH 2/3] video: display: use edid_get_timing_validate() variant to filter supported EDID modes
Neil Armstrong
- [U-Boot] [PATCH 3/3] video: meson: dw-hdmi: add EDID mode filtering to only select supported modes
Neil Armstrong
- [U-Boot] [PATCH] board: amlogic: add mailing-list to MAINTAINERS
Neil Armstrong
- [U-Boot] [PATCH 0/3] amlogic: add unique MAC address generatio
Neil Armstrong
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190704
Neil Armstrong
- [U-Boot] [PATCH] board: amlogic: add mailing-list to MAINTAINERS
Neil Armstrong
- [U-Boot] [PATCH] ARM: dts: Sync Amlogic G12A with Linux 5.3-rc1
Neil Armstrong
- [U-Boot] [PATCH 0/3] amlogic: Add support for Odroid-N2
Neil Armstrong
- [U-Boot] [PATCH 1/3] ARM: dts: add support for Odroid-N2
Neil Armstrong
- [U-Boot] [PATCH 2/3] ARM: meson-g12a: Handle 4GiB DRAM size
Neil Armstrong
- [U-Boot] [PATCH 3/3] board: amlogic: add support for Odroid-N2
Neil Armstrong
- [U-Boot] [PATCH 3/3] board: amlogic: add support for Odroid-N2
Neil Armstrong
- [U-Boot] [PATCH 1/3] ARM: dts: add support for Odroid-N2
Neil Armstrong
- [U-Boot] [PATCH 1/3] edid: add edid_get_timing_validate() variant to filter out edid modes
Neil Armstrong
- [U-Boot] [PATCH] edid: fix edid_get_timing_validate() mode_valid lookup
Neil Armstrong
- [U-Boot] [PATCH 0/3] amlogic: Add support for Odroid-N2
Neil Armstrong
- [U-Boot] [PATCH 1/3] ARM: dts: add support for Odroid-N2
Neil Armstrong
- [U-Boot] [PATCH 2/3] ARM: meson-g12a: Handle 4GiB DRAM size
Neil Armstrong
- [U-Boot] [PATCH 3/3] board: amlogic: add support for Odroid-N2
Neil Armstrong
- [U-Boot] [PATCH 0/5] amlogic: add support for the SEI Robotic SEI510
Neil Armstrong
- [U-Boot] [PATCH 1/5] ARM: dts: Import Amlogic G12A SEI510 DT from Linux 5.3-rc1
Neil Armstrong
- [U-Boot] [PATCH 2/5] configs: meson64: permit redefining ENV_SIZE
Neil Armstrong
- [U-Boot] [PATCH 3/5] boards: meson: add g12a sei510
Neil Armstrong
- [U-Boot] [PATCH 4/5] ARM: meson: Add support for fastboot_set_reboot_flag()
Neil Armstrong
- [U-Boot] [PATCH 5/5] configs: sei510: disable PSCI_RESET to support fastboot reboot_flag
Neil Armstrong
- [U-Boot] [PATCH 0/5] amlogic: add support for the SEI Robotic SEI510
Neil Armstrong
- [U-Boot] [RESEND PATCH 0/5] amlogic: add support for the SEI Robotic SEI510
Neil Armstrong
- [U-Boot] [RESEND PATCH 1/5] ARM: dts: Import Amlogic G12A SEI510 DT from Linux 5.3-rc1
Neil Armstrong
- [U-Boot] [RESEND PATCH 2/5] configs: meson64: permit redefining ENV_SIZE
Neil Armstrong
- [U-Boot] [RESEND PATCH 3/5] boards: meson: add g12a sei510
Neil Armstrong
- [U-Boot] [RESEND PATCH 4/5] ARM: meson: Add support for fastboot_set_reboot_flag()
Neil Armstrong
- [U-Boot] [RESEND PATCH 5/5] configs: sei510: disable PSCI_RESET to support fastboot reboot_flag
Neil Armstrong
- [U-Boot] [PATCH 1/1] clk: meson: remove duplicate logic
Neil Armstrong
- [U-Boot] [PATCH 0/3] amlogic: Add support for Odroid-N2
Neil Armstrong
- [U-Boot] [PATCH] ARM: dts: Sync Amlogic G12A with Linux 5.3-rc1
Neil Armstrong
- [U-Boot] [PATCH 0/3] amlogic: Add support for Odroid-N2
Neil Armstrong
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190731
Neil Armstrong
- [U-Boot] [PATCH 1/2] riscv: Sync csr.h with Linux kernel v5.2
Auer, Lukas
- [U-Boot] [PATCH 2/2] riscv: Access CSRs using CSR numbers
Auer, Lukas
- [U-Boot] [PATCH 2/2] riscv: Access CSRs using CSR numbers
Auer, Lukas
- [U-Boot] [RFC PATCH 00/11] SPL support for RISC-V
Lukas Auer
- [U-Boot] [RFC PATCH 01/11] fdtdec: make CONFIG_OF_PRIOR_STAGE available in SPL
Lukas Auer
- [U-Boot] [RFC PATCH 02/11] Makefile: support building SPL FIT images without device trees
Lukas Auer
- [U-Boot] [RFC PATCH 03/11] spl: fit: use U-Boot device tree when FIT image has no device tree
Lukas Auer
- [U-Boot] [RFC PATCH 04/11] riscv: add run mode configuration for SPL
Lukas Auer
- [U-Boot] [RFC PATCH 05/11] spl: support booting via RISC-V OpenSBI
Lukas Auer
- [U-Boot] [RFC PATCH 06/11] riscv: add SPL support
Lukas Auer
- [U-Boot] [RFC PATCH 07/11] riscv: support SPL stack and global data relocation
Lukas Auer
- [U-Boot] [RFC PATCH 08/11] riscv: add a generic FIT generator script
Lukas Auer
- [U-Boot] [RFC PATCH 09/11] riscv: set default FIT generator script and build target for SPL builds
Lukas Auer
- [U-Boot] [RFC PATCH 10/11] riscv: qemu: add SPL configuration
Lukas Auer
- [U-Boot] [RFC PATCH 11/11] doc: update QEMU RISC-V documentation
Lukas Auer
- [U-Boot] [RFC PATCH 00/11] SPL support for RISC-V
Auer, Lukas
- [U-Boot] [RFC PATCH 00/11] SPL support for RISC-V
Auer, Lukas
- [U-Boot] [RFC PATCH 00/11] SPL support for RISC-V
Auer, Lukas
- [U-Boot] [PATCH v2 00/11] SPL support for RISC-V
Lukas Auer
- [U-Boot] [PATCH v2 01/11] fdtdec: make CONFIG_OF_PRIOR_STAGE available in SPL
Lukas Auer
- [U-Boot] [PATCH v2 02/11] Makefile: support building SPL FIT images without device trees
Lukas Auer
- [U-Boot] [PATCH v2 03/11] spl: fit: use U-Boot device tree when FIT image has no device tree
Lukas Auer
- [U-Boot] [PATCH v2 04/11] riscv: add run mode configuration for SPL
Lukas Auer
- [U-Boot] [PATCH v2 05/11] spl: support booting via RISC-V OpenSBI
Lukas Auer
- [U-Boot] [PATCH v2 06/11] riscv: add SPL support
Lukas Auer
- [U-Boot] [PATCH v2 07/11] riscv: support SPL stack and global data relocation
Lukas Auer
- [U-Boot] [PATCH v2 08/11] riscv: add a generic FIT generator script
Lukas Auer
- [U-Boot] [PATCH v2 09/11] riscv: set default FIT generator script and build target for SPL builds
Lukas Auer
- [U-Boot] [PATCH v2 10/11] riscv: qemu: add SPL configuration
Lukas Auer
- [U-Boot] [PATCH v2 11/11] doc: update QEMU RISC-V documentation
Lukas Auer
- [U-Boot] [PATCH v2 05/11] spl: support booting via RISC-V OpenSBI
Auer, Lukas
- [U-Boot] [PATCH v2 00/11] SPL support for RISC-V
Auer, Lukas
- [U-Boot] Can't change stdout variable from code (read only variable) [u-boot 2019.07]
RIDET Aurelien
- [U-Boot] Question regarding the Common Clock Framework CCF v5 patches
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190704
Stefano Babic
- [U-Boot] [PATCH 1/3] spl: imx6: Let spl_boot_device return USDHC1 or USDHC2
Stefano Babic
- [U-Boot] [PATCH v2 3/3] usb: gadget: f_sdp: Allow SPL to load and boot FIT via SDP
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190719
Stefano Babic
- [U-Boot] [PATCH v2 0/5] nitrogen6x device tree migration
Stefano Babic
- [U-Boot] [PATCH] board/fsl/lx2160ardb: enable flexcan
Pankaj Bansal
- [U-Boot] [PATCH v2] board/fsl/lx2160ardb: enable flexcan
Pankaj Bansal
- [U-Boot] [PATCH] board: fsl: lx2160a: implement board_fix_fdt
Pankaj Bansal
- [U-Boot] [PATCH v2] board: fsl: lx2160a: implement board_fix_fdt
Pankaj Bansal
- [U-Boot] [PATCH v6] board/fsl/lx2160a: Fix MC firmware loading during SD boot
Pankaj Bansal
- [U-Boot] [PATCH] armv8: ls1028aqds: define ARCH_MISC_INIT to handle mux
Pankaj Bansal
- [U-Boot] [PATCH] riscv : serial: use rx watermark to indicate rx data is present
Padmarao Begari
- [U-Boot] [PATCH u-boot-marvell 1/1] arm: mvebu: turris_omnia: update defconfig
Marek Behún
- [U-Boot] [PATCH u-boot-spi 1/1] spi: mvebu_a3700_spi: Fix clock prescale computation
Marek Behún
- [U-Boot] [PATCH u-boot-spi 1/1] spi: mvebu_a3700_spi: Fix clock prescale computation
Marek Behún
- [U-Boot] [PATCH u-boot-mmc 1/1] mmc: sdhci: Read cd-gpios instead of cd-gpio from devicetree
Marek Behún
- [U-Boot] [PATCH u-boot-spi v2 1/1] spi: mvebu_a3700_spi: Fix clock prescale computation
Marek Behún
- [U-Boot] [U-Boot-Custodians] [U-Boot-Board-Maintainers] [ANN] U-Boot v2019.07-rc4 released
Troy Benjegerdes
- [U-Boot] [U-Boot-Board-Maintainers] [U-Boot-Custodians] [ANN] U-Boot v2019.07-rc4 released
Troy Benjegerdes
- [U-Boot] [PATCH v7 7/9] riscv: sifive: fu540: Setup ethaddr env variable using OTP
Troy Benjegerdes
- [U-Boot] [PATCH] rpi: increase SYS_BOOTM_LEN to 64M
Bonnans, Laurent
- [U-Boot] [PATCH v2] rpi: increase SYS_BOOTM_LEN to 64M on ARM64
Bonnans, Laurent
- [U-Boot] Fwd: axp209 driver bug report
Pierre-louis Boyer
- [U-Boot] [PATCH] watchdog: mtk_wdt: Cosmetic cleanup of latest changes
Matthias Brugger
- [U-Boot] pull request: raspberry pi updates
Matthias Brugger
- [U-Boot] [PATCH 00/16] Raspberry Pi 32/64 support
Matthias Brugger
- [U-Boot] [PATCH 01/16] dts: Create a dtsi for BCM2835/6/7 specific configuration
Matthias Brugger
- [U-Boot] [PATCH 02/16] dts: Add initial support for bcm2838
Matthias Brugger
- [U-Boot] [PATCH 04/16] arm: mach-bcm283x: Define mbox address for BCM2838
Matthias Brugger
- [U-Boot] [PATCH 06/16] dt-bindings: Define BCM2838_CLOCK_EMMC2 needed for RaspberryPi 4
Matthias Brugger
- [U-Boot] [PATCH 12/16] config: rpi4: Add defconfig for rpi4-32
Matthias Brugger
- [U-Boot] [PATCH 13/16] dts: bcm2838-rpi-4-b: Use the emmc2 interface for sdhci
Matthias Brugger
- [U-Boot] [PATCH 05/16] rpi: Add rpi_model entry for RaspberryPi 4
Matthias Brugger
- [U-Boot] [PATCH 08/16] mmc: bcm2835_sdhci: Add support for bcm2711 device
Matthias Brugger
- [U-Boot] rpi2: u-boot misaligned operation
Matthias Brugger
- [U-Boot] [PATCH v2 8/8] git-mailrc: Add rpi and bcm283x maintainer
Matthias Brugger
- [U-Boot] [PATCH v2 3/8] ARM: bcm283x: Define configs for RaspberryPi 4
Matthias Brugger
- [U-Boot] [PATCH] rpi: increase SYS_BOOTM_LEN to 64M
Matthias Brugger
- [U-Boot] (Offlist) Re: U-Boot/EBBR plugfest at ELC-EU?
Matthias Brugger
- [U-Boot] [PATCH] board_r: re-order the board_early_init_r()
Matthias Brugger
- [U-Boot] Standalone program help needed
Szabolcs Báder
- [U-Boot] [PATCH] mmc: sti_sdhci: Fix sdhci_setup_cfg() call.
Patrice CHOTARD
- [U-Boot] ARM: imx6: Add support for SD/MMC Manufacture Mode
Jay Carlson
- [U-Boot] [PATCH] Support raw initrd for qemu riscv64 targets.
Vagrant Cascadian
- [U-Boot] Splash image Connect Core Imx53
Ignacio Castellano
- [U-Boot] [PATCH] video: backlight: fix pwm invertation
Nicolas Chauvet
- [U-Boot] [PATCH] video: backlight: fix pwm invertation
Nicolas Chauvet
- [U-Boot] [ANNOUNCEMENT] Switching to gitlab.denx.de
Rick Chen
- [U-Boot] [PATCH v2 5/7] riscv: cache: Flush L2 cache before jump to linux
Rick Chen
- [U-Boot] [PATCH v2 2/7] dm: cache: add v5l2 cache controller driver
Rick Chen
- [U-Boot] [PATCH v2 1/7] dm: cache: Add enable and disable ops for cache uclass
Rick Chen
- [U-Boot] SiFive clock driver changes for U-Boot 2019.10
Rick Chen
- [U-Boot] SiFive clock driver changes for U-Boot 2019.10
Rick Chen
- [U-Boot] [PATCH 1/2] riscv: Sync csr.h with Linux kernel v5.2
Rick Chen
- [U-Boot] [PATCH 2/2] riscv: Access CSRs using CSR numbers
Rick Chen
- [U-Boot] SiFive clock driver changes for U-Boot 2019.10
Rick Chen
- [U-Boot] [PATCH] riscv: tools: Fix prelink-riscv to work on big endian hosts
Rick Chen
- [U-Boot] SiFive clock driver changes for U-Boot 2019.10
Rick Chen
- [U-Boot] [PATCH v9 1/9] clk: sifive: Factor-out PLL library as separate module
Rick Chen
- [U-Boot] [PATCH v9 2/9] clk: sifive: Sync-up WRPLL library with upstream Linux
Rick Chen
- [U-Boot] [PATCH v9 3/9] clk: sifive: Sync-up DT bindings header with upstream Linux
Rick Chen
- [U-Boot] [PATCH v9 4/9] clk: sifive: Sync-up main driver with upstream Linux
Rick Chen
- [U-Boot] [PATCH v9 5/9] clk: sifive: Drop GEMGXL clock driver
Rick Chen
- [U-Boot] [PATCH v9 7/9] riscv: sifive: fu540: Setup ethaddr env variable using OTP
Rick Chen
- [U-Boot] [PATCH v9 8/9] doc: sifive-fu540: Update README for steps to create FW_PAYLOAD
Rick Chen
- [U-Boot] [PATCH v6 3/4] riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
Rick Chen
- [U-Boot] [PATCH v6 4/4] doc: sifive-fu540: Update README for SiFive SPI and MMC SPI drivers
Rick Chen
- [U-Boot] [PATCH 2/2] riscv: Access CSRs using CSR numbers
Rick Chen
- [U-Boot] [PATCH] clk: sifive: fu540-prci: align primary DT match string to the DT bindings
Rick Chen
- [U-Boot] [PATCH] riscv : serial: use rx watermark to indicate rx data is present
Rick Chen
- [U-Boot] [PATCH] riscv : serial: use rx watermark to indicate rx data is present
Rick Chen
- [U-Boot] [PATCH] mmc: stm32_sdmmc2: Increase SDMMC_BUSYD0END_TIMEOUT_US
Patrice Chotard
- [U-Boot] [PATCH] mmc: sti_sdhci: Fix sdhci_setup_cfg() call.
Patrice Chotard
- [U-Boot] [PATCH] ARM: dts: stih410-b2260: Sync DT with kernel v5.2
Patrice Chotard
- [U-Boot] [PATCH v2] mmc: sti_sdhci: Fix sdhci_setup_cfg() call.
Patrice Chotard
- [U-Boot] [PATCH] regulator: fixed: Modify enable-active-high behavior
Patrice Chotard
- [U-Boot] [PATCH] tools: buildman: add gcc-8.1.0 support
Thomas Chou
- [U-Boot] (no subject)
Thomas Chou
- [U-Boot] (no subject)
Thomas Chou
- [U-Boot] (no subject)
Thomas Chou
- [U-Boot] [PATCH] riscv: tools: Fix prelink-riscv to work on big endian hosts
Marcus Comstedt
- [U-Boot] [PATCH] riscv: tools: Fix prelink-riscv to work on big endian hosts
Marcus Comstedt
- [U-Boot] [PATCH 2/2] rtc: Add rtc driver for stm32mp1
Patrick DELAUNAY
- [U-Boot] [PATCH v2] rtc: Add rtc driver for stm32mp1
Patrick DELAUNAY
- [U-Boot] [PATCH 1/2] env: Move CONFIG_ENV_UBI_VOLUME_REDUND in Kconfig
Patrick DELAUNAY
- [U-Boot] [PATCH 19/20] psci: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH v2 01/16] stm32mp1: deactivate WATCHDOG in defconfig
Patrick DELAUNAY
- [U-Boot] [PATCH v2 02/16] stm32mp1: call regulators_enable_boot_on in board_init
Patrick DELAUNAY
- [U-Boot] [PATCH v2 03/16] stm32mp1: syscon: remove etzpc support
Patrick DELAUNAY
- [U-Boot] [PATCH v2 04/16] stm32mp1: syscon: remove stgen
Patrick DELAUNAY
- [U-Boot] [PATCH v2 05/16] dt-bindings: pinctrl: stm32: add new entry for package information
Patrick DELAUNAY
- [U-Boot] [PATCH v2 06/16] stm32mp1: export get_cpu_package function
Patrick DELAUNAY
- [U-Boot] [PATCH v2 07/16] stm32mp1: update package information in device tree
Patrick DELAUNAY
- [U-Boot] [PATCH v2 08/16] stm32mp1: update device tree with ETZPC status
Patrick DELAUNAY
- [U-Boot] [PATCH v2 09/16] stm32mp1: add stboard command
Patrick DELAUNAY
- [U-Boot] [PATCH v2 10/16] stm32mp1: key: add stm32key command
Patrick DELAUNAY
- [U-Boot] [PATCH v2 11/16] stm32mp1: update README
Patrick DELAUNAY
- [U-Boot] [PATCH v2 12/16] stm32mp1: cosmetic: remove unnecessary include
Patrick DELAUNAY
- [U-Boot] [PATCH v2 13/16] stm32mp1: configs: Add CONFIG_OF_SPL_REMOVE_PROPS
Patrick DELAUNAY
- [U-Boot] [PATCH v2 14/16] stm32mp1: add check for presence of environment in boot device
Patrick DELAUNAY
- [U-Boot] [PATCH v2 15/16] stm32mp1: force boot_net_usb_start
Patrick DELAUNAY
- [U-Boot] [PATCH v2 16/16] ARM: dts: stm32mp1: sync device tree with v5.2-rc4
Patrick DELAUNAY
- [U-Boot] [PATCH 1/3] stm32mp1: reorder some CONFIG in stm32mp1.h
Patrick DELAUNAY
- [U-Boot] [PATCH 2/3] stm32mp1: add configuration op-tee
Patrick DELAUNAY
- [U-Boot] [PATCH 3/3] stm32mp1: activate OF_BOARD_SETUP and FDT_FIXUP_PARTITIONS
Patrick DELAUNAY
- [U-Boot] [PATCH 1/4] ARM: dts: stm32: Use kernel qspi compatible string for stm32f7-uboot.dtsi
Patrick DELAUNAY
- [U-Boot] [PATCH 2/4] ARM: dts: stm32: Use kernel qspi compatible string for stm32f469-disco-uboot.dtsi
Patrick DELAUNAY
- [U-Boot] [PATCH 3/4] spi: stm32_qspi: Remove "st, stm32-qspi" compatible string
Patrick DELAUNAY
- [U-Boot] [PATCH 4/4] doc: device-tree-bindings: alignment with v5.2-rc6 for spi-stm32-qspi.txt
Patrick DELAUNAY
- [U-Boot] [PATCH 1/4] mailbox: introduce stm32-ipcc driver
Patrick DELAUNAY
- [U-Boot] [PATCH 2/4] MAINTAINERS: Add stm32 mailbox IPPC driver
Patrick DELAUNAY
- [U-Boot] [PATCH 3/4] configs: stm32mp15: enable IPCC mailbox
Patrick DELAUNAY
- [U-Boot] [PATCH 4/4] ARM: dts: stm32: Add ipcc mailbox support on stm32mp1
Patrick DELAUNAY
- [U-Boot] [PATCH] MAINTAINERS: Add git custodians for ARM STM STM32MP entry
Patrick DELAUNAY
- [U-Boot] [PATCH 2/2] stm32mp1: move CONFIG_ENV in Kconfig
Patrick DELAUNAY
- [U-Boot] [PATCH] sysreset: syscon: add support for power off
Patrick DELAUNAY
- [U-Boot] [PATCH] pmic: stpmic1: add support for SYSRESET_POWER_OFF
Patrick DELAUNAY
- [U-Boot] [PATCH 1/2] stm32mp1: Add UBIFS boot capability
Patrick DELAUNAY
- [U-Boot] [PATCH 2/2] stm32mp1: add SPI flash support in SPL
Patrick DELAUNAY
- [U-Boot] [PATCH] board: st: add missing gpio_request() for stm32f429-discovery
Patrick DELAUNAY
- [U-Boot] [PATCH 01/20] stm32mp1: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 03/20] serial: stm32: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 02/20] board: stm32mp1: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 08/20] gpio: stm32_gpio: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 05/20] stm32mp1: bsec: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 04/20] mmc: stm32_sdmmc2: avoid warnings when building with W=1 option
Patrick DELAUNAY
- [U-Boot] [PATCH 09/20] i2c: stm32f7_i2c: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 10/20] clk: clk_stm32mp1: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 06/20] adc: stm32-adc: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 12/20] misc: stm32_fuse: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 11/20] power: regulator: stm32: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 07/20] adc: stm32: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 13/20] ram: stm32mp1_ram: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 14/20] pinctrl: pinctrl_stm32: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 15/20] power: stpmic1: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 16/20] mtd: rawnand: stm32_fmc2: avoid warnings when building with W=1 option
Patrick DELAUNAY
- [U-Boot] [PATCH 17/20] spi: stm32_qspi: avoid warnings when building with W=1 option
Patrick DELAUNAY
- [U-Boot] [PATCH 18/20] cmd: pinmux: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 19/20] psci: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PATCH 20/20] spi: stm32: Fix warnings when compiling with W=1
Patrick DELAUNAY
- [U-Boot] [PULL] u-boot-stm32/master for v2019.10-rc1: u-boot-stm32-20190712
Patrick DELAUNAY
- [U-Boot] [PATCH v3 4/7] remoteproc: add elf file load support
Patrick DELAUNAY
- [U-Boot] [PATCH v3 1/7] dm: core: Introduce xxx_translate_dma_address()
Patrick DELAUNAY
- [U-Boot] [PATCH v3 2/7] remoteproc: fix function headers
Patrick DELAUNAY
- [U-Boot] [PATCH v3 3/7] remoteproc: add device_to_virt ops
Patrick DELAUNAY
- [U-Boot] [PATCH v3 4/7] remoteproc: add elf file load support
Patrick DELAUNAY
- [U-Boot] [PATCH v3 5/7] remoteproc: Introduce STM32 Cortex-M4 remoteproc driver
Patrick DELAUNAY
- [U-Boot] [PATCH v3 6/7] MAINTAINERS: Add stm32 remoteproc driver
Patrick DELAUNAY
- [U-Boot] [PATCH v3 7/7] configs: stm32mp15: enable stm32 remoteproc
Patrick DELAUNAY
- [U-Boot] [PATCH 1/4] ARM: dts: stm32: Use kernel qspi compatible string for stm32f7-uboot.dtsi
Patrick DELAUNAY
- [U-Boot] [PATCH 2/4] ARM: dts: stm32: Use kernel qspi compatible string for stm32f469-disco-uboot.dtsi
Patrick DELAUNAY
- [U-Boot] [PATCH 3/4] spi: stm32_qspi: Remove "st, stm32-qspi" compatible string
Patrick DELAUNAY
- [U-Boot] [PATCH 4/4] doc: device-tree-bindings: alignment with v5.2-rc6 for spi-stm32-qspi.txt
Patrick DELAUNAY
- [U-Boot] [PATCH v3 1/2] clk: stm32mp1: Add RTC clock entry
Patrick DELAUNAY
- [U-Boot] [PATCH v3 2/2] rtc: Add rtc driver for stm32mp1
Patrick DELAUNAY
- [U-Boot] [PULL] u-boot-stm32/master for v2019.10-rc1: u-boot-stm32-20190723
Patrick DELAUNAY
- [U-Boot] [PATCH 1/2] tools: mkenvimage: Fix reading from slow pipe
Alexander Dahl
- [U-Boot] [PATCH] ARM: Stalling secondary CPUs when Qemu starts U-boot with more than one CPU
Rossier Daniel
- [U-Boot] Getting address and size of loadable images through DT
Rossier Daniel
- [U-Boot] [RFC] bug.h: Drop filename from BUG/WARNING logs if building for TPL/SPL
Andreas Dannenberg
- [U-Boot] [RFC] bug.h: Drop filename from BUG/WARNING logs if building for TPL/SPL
Andreas Dannenberg
- [U-Boot] [RFC] bug.h: Drop filename from BUG/WARNING logs if building for TPL/SPL
Andreas Dannenberg
- [U-Boot] [RFC] bug.h: Drop filename from BUG/WARNING logs if building for TPL/SPL
Andreas Dannenberg
- [U-Boot] [PATCH] arm: mach-keystone: Use appended original image size in image processing
Andrew F. Davis
- [U-Boot] [PATCH] env: ti: boot: Use ttyS2 instead of ttyO2
Andrew F. Davis
- [U-Boot] [PATCH] env: ti: boot: Use ttyS2 instead of ttyO2
Andrew F. Davis
- [U-Boot] [PATCH v2] arm: mach-keystone: Use appended original image size in image processing
Andrew F. Davis
- [U-Boot] [PATCH] board: ti: am57xx: Correct the fastboot product var
Andrew F. Davis
- [U-Boot] [PATCH] board: ti: am57xx: Correct the fastboot product var
Andrew F. Davis
- [U-Boot] [PATCH v2] omap: Correct the fastboot product var
Andrew F. Davis
- [U-Boot] [PATCH 0/3] stm32mp1: add OP-TEE configuration and associated MTD partitions
Patrick Delaunay
- [U-Boot] [PATCH 1/3] stm32mp1: reorder some CONFIG in stm32mp1.h
Patrick Delaunay
- [U-Boot] [PATCH 2/3] stm32mp1: add configuration op-tee
Patrick Delaunay
- [U-Boot] [PATCH 3/3] stm32mp1: activate OF_BOARD_SETUP and FDT_FIXUP_PARTITIONS
Patrick Delaunay
- [U-Boot] [PATCH v2 00/16] stm32m1 patches for v2019.10
Patrick Delaunay
- [U-Boot] [PATCH v2 01/16] stm32mp1: deactivate WATCHDOG in defconfig
Patrick Delaunay
- [U-Boot] [PATCH v2 02/16] stm32mp1: call regulators_enable_boot_on in board_init
Patrick Delaunay
- [U-Boot] [PATCH v2 03/16] stm32mp1: syscon: remove etzpc support
Patrick Delaunay
- [U-Boot] [PATCH v2 04/16] stm32mp1: syscon: remove stgen
Patrick Delaunay
- [U-Boot] [PATCH v2 05/16] dt-bindings: pinctrl: stm32: add new entry for package information
Patrick Delaunay
- [U-Boot] [PATCH v2 06/16] stm32mp1: export get_cpu_package function
Patrick Delaunay
- [U-Boot] [PATCH v2 07/16] stm32mp1: update package information in device tree
Patrick Delaunay
- [U-Boot] [PATCH v2 08/16] stm32mp1: update device tree with ETZPC status
Patrick Delaunay
- [U-Boot] [PATCH v2 09/16] stm32mp1: add stboard command
Patrick Delaunay
- [U-Boot] [PATCH v2 10/16] stm32mp1: key: add stm32key command
Patrick Delaunay
- [U-Boot] [PATCH v2 11/16] stm32mp1: update README
Patrick Delaunay
- [U-Boot] [PATCH v2 12/16] stm32mp1: cosmetic: remove unnecessary include
Patrick Delaunay
- [U-Boot] [PATCH v2 13/16] stm32mp1: configs: Add CONFIG_OF_SPL_REMOVE_PROPS
Patrick Delaunay
- [U-Boot] [PATCH v2 14/16] stm32mp1: add check for presence of environment in boot device
Patrick Delaunay
- [U-Boot] [PATCH v2 15/16] stm32mp1: force boot_net_usb_start
Patrick Delaunay
- [U-Boot] [PATCH v2 16/16] ARM: dts: stm32mp1: sync device tree with v5.2-rc4
Patrick Delaunay
- [U-Boot] [PATCH 0/5] misc: update drivers for stm32mp1
Patrick Delaunay
- [U-Boot] [PATCH 1/5] bsec: update after MISC u-class update
Patrick Delaunay
- [U-Boot] [PATCH 2/5] pmu: stpmic1: change specific NVM api to MISC
Patrick Delaunay
- [U-Boot] [PATCH 3/5] stpmic1: simplify stpmic1_sysreset_request
Patrick Delaunay
- [U-Boot] [PATCH 4/5] stm32mp1: update test on misc_read result
Patrick Delaunay
- [U-Boot] [PATCH 5/5] misc: change RCC form MISC to NOP uclass
Patrick Delaunay
- [U-Boot] [RFC PATCH 00/14] dfu: update dfu stack and use them for stm32mp1
Patrick Delaunay
- [U-Boot] [RFC PATCH 01/14] dfu: cosmetic: cleanup sf to avoid checkpatch error
Patrick Delaunay
- [U-Boot] [RFC PATCH 02/14] dfu: sf: add partition support for nor backend
Patrick Delaunay
- [U-Boot] [RFC PATCH 03/14] dfu: prepare the support of multiple interface
Patrick Delaunay
- [U-Boot] [RFC PATCH 04/14] dfu: allow to manage DFU on several devices
Patrick Delaunay
- [U-Boot] [RFC PATCH 05/14] dfu: allow read with 0 data for EOF indication
Patrick Delaunay
- [U-Boot] [RFC PATCH 06/14] dfu: add backend for MTD device
Patrick Delaunay
- [U-Boot] [RFC PATCH 07/14] dfu: add partition support for MTD backend
Patrick Delaunay
- [U-Boot] [RFC PATCH 08/14] dfu: add DFU virtual backend
Patrick Delaunay
- [U-Boot] [RFC PATCH 09/14] dfu: add callback for flush and initiated operation
Patrick Delaunay
- [U-Boot] [RFC PATCH 10/14] stm32mp1: activate DFU support and command MTD
Patrick Delaunay
- [U-Boot] [RFC PATCH 11/14] stm32mp1: activate SET_DFU_ALT_INFO
Patrick Delaunay
- [U-Boot] [RFC PATCH 12/14] stp32mp1: configs: activate CONFIG_MTD_SPI_NAND
Patrick Delaunay
- [U-Boot] [RFC PATCH 13/14] stm32mp1: board: add spi nand support
Patrick Delaunay
- [U-Boot] [RFC PATCH 14/14] stm32mp1: add support for virtual partition read
Patrick Delaunay
- [U-Boot] [PATCH v2] psci: Fix warnings when compiling with W=1
Patrick Delaunay
- [U-Boot] [PATCH] rtc: stm32: manage 2 digit limitation on year
Patrick Delaunay
- [U-Boot] [PATCH 00/48] stm32mp1 patches for v2019.10
Patrick Delaunay
- [U-Boot] [PATCH 01/48] stm32mp1: cosmetic: remove comment
Patrick Delaunay
- [U-Boot] [PATCH 02/48] pinctrl: pinctrl_stm32: cosmetic: Reorder include files
Patrick Delaunay
- [U-Boot] [PATCH 03/48] pinctrl: stmfx: update pinconf settings
Patrick Delaunay
- [U-Boot] [PATCH 04/48] ARM: dts: stm32mp1: sync device tree with v5.3-rc2
Patrick Delaunay
- [U-Boot] [PATCH 05/48] ARM: dts: stm32mp1: DDR config v1.45
Patrick Delaunay
- [U-Boot] [PATCH 06/48] ARM: dts: stm32mp1: Add iwdg2 support for SPL
Patrick Delaunay
- [U-Boot] [PATCH 07/48] ARM: dts: stm32mp1: Add PSCI node access before relocation
Patrick Delaunay
- [U-Boot] [PATCH 08/48] ARM: dts: stm32mp1: add ldtc pre-reloc proper in SOC file
Patrick Delaunay
- [U-Boot] [PATCH 09/48] ARM: dts: stm32mp1: add key support on DK1/DK2
Patrick Delaunay
- [U-Boot] [PATCH 10/48] ARM: dts: stm32mp1: add pull-up on serial rx of console connected to STLINK
Patrick Delaunay
- [U-Boot] [PATCH 11/48] dt-bindings: clock: stm32mp1: support disabled fixed clock
Patrick Delaunay
- [U-Boot] [PATCH 12/48] stpmic1: program pmic to keep only the debug unit on
Patrick Delaunay
- [U-Boot] [PATCH 13/48] stm32mp1: configs: remove CONFIG_SYS_HZ
Patrick Delaunay
- [U-Boot] [PATCH 14/48] stm32mp1: configs: activate CONFIG_SILENT_CONSOLE
Patrick Delaunay
- [U-Boot] [PATCH 15/48] stm32mp1: configs: activate PRE_CONSOLE_BUFFER
Patrick Delaunay
- [U-Boot] [PATCH 16/48] stm32mp1: configs: deactivate ARMV7_VIRT for basic boot
Patrick Delaunay
- [U-Boot] [PATCH 17/48] stm32mp1: configs: select CONFIG_STM32_SERIAL
Patrick Delaunay
- [U-Boot] [PATCH 18/48] stm32mp1: configs: Activate DISABLE_CONSOLE
Patrick Delaunay
- [U-Boot] [PATCH 19/48] stm32mp1: configs: support MTDPARTS only if needed
Patrick Delaunay
- [U-Boot] [PATCH 20/48] stm32mp1: configs: imply CONFIG_OF_LIBFDT_OVERLAY
Patrick Delaunay
- [U-Boot] [PATCH 21/48] stm32mp1: configs: Deactivate SPI_FLASH_BAR
Patrick Delaunay
- [U-Boot] [PATCH 22/48] stm32mp1: configs: add CONFIG_DM_VIDEO
Patrick Delaunay
- [U-Boot] [PATCH 23/48] stm32mp1: configs: add BACKLIGHT_GPIO support
Patrick Delaunay
- [U-Boot] [PATCH 24/48] stm32mp1: configs: add CONFIG_CMD_BMP
Patrick Delaunay
- [U-Boot] [PATCH 25/48] stm32mp1: configs: add condition to activate WATCHDOG in SPL
Patrick Delaunay
- [U-Boot] [PATCH 26/48] stm32mp1: configs: add altbootcmd
Patrick Delaunay
- [U-Boot] [PATCH 27/48] stm32mp1: configs: Set bootdelay to 1
Patrick Delaunay
- [U-Boot] [PATCH 28/48] stm32mp1: configs: add spi load support in spl
Patrick Delaunay
- [U-Boot] [PATCH 29/48] stm32mp1: board: add environment variable for board id and board rev
Patrick Delaunay
- [U-Boot] [PATCH 30/48] stm32mp1: board: enable v1v2_hdmi and v3v3_hdmi regulator on dk2 boot
Patrick Delaunay
- [U-Boot] [PATCH 31/48] stm32mp1: board: support of error led on ed1/ev1 board
Patrick Delaunay
- [U-Boot] [PATCH 32/48] stm32mp1: board: protect the led function calls
Patrick Delaunay
- [U-Boot] [PATCH 33/48] stm32mp1: board: check the boot-source to disable bootdelay
Patrick Delaunay
- [U-Boot] [PATCH 34/48] stm32mp1: board: Update the way vdd-supply is retrieved from DT
Patrick Delaunay
- [U-Boot] [PATCH 35/48] stm32mp1: board: remove board_check_usb_power when ADC is not activated
Patrick Delaunay
- [U-Boot] [PATCH 36/48] stm32mp1: board: cosmetic: cleanup file
Patrick Delaunay
- [U-Boot] [PATCH 37/48] mmc: stm32_sdmmc2: reload watchdog
Patrick Delaunay
- [U-Boot] [PATCH 38/48] serial: stm32: add Framing error support
Patrick Delaunay
- [U-Boot] [PATCH 39/48] serial: stm32: remove unused include
Patrick Delaunay
- [U-Boot] [PATCH 40/48] stm32mp1: ram: cosmetic: remove unused prototype
Patrick Delaunay
- [U-Boot] [PATCH 41/48] stm32mp1: ram: fix address issue in 2 tests
Patrick Delaunay
- [U-Boot] [PATCH 42/48] stm32mp1: ram: update loop management in infinite test
Patrick Delaunay
- [U-Boot] [PATCH 43/48] stm32mp1: ram: reload watchdog during ddr test
Patrick Delaunay
- [U-Boot] [PATCH 44/48] stm32mp1: ram: add pattern parameter in infinite write test
Patrick Delaunay
- [U-Boot] [PATCH 45/48] stm32mp1: Makefile cleanup
Patrick Delaunay
- [U-Boot] [PATCH 46/48] stm32mp1: clk: remove debug traces
Patrick Delaunay
- [U-Boot] [PATCH 47/48] stm32mp1: clk: use gd to store frequency information
Patrick Delaunay
- [U-Boot] [PATCH 48/48] MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD
Patrick Delaunay
- [U-Boot] [ANN] U-Boot v2019.07 released
Wolfgang Denk
- [U-Boot] Standalone program help needed
Wolfgang Denk
- [U-Boot] Standalone program help needed
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 00/16] efi_loader: non-volatile variables support
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 01/16] hashtable: extend interfaces to handle entries with context
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 02/16] env: extend interfaces to import/export U-Boot environment per context
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 03/16] env: extend interfaces to label variable with context
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 04/16] env: flash: add U-Boot environment context support
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 05/16] env: fat: add U-Boot environment context support
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 06/16] env: add variable storage attribute support
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 07/16] env: add/expose attribute helper functions for hashtable
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 08/16] hashtable: import/export entries with flags
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 09/16] hashtable: extend hdelete_ext for autosave
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 10/16] env: save non-volatile variables only
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 11/16] env: save a context immediately if 'autosave' variable is changed
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 12/16] env: extend interfaces to get/set attributes
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 13/16] cmd: env: show variable storage attribute in "env flags" command
Wolfgang Denk
- [U-Boot] [RFC,PATCH v4 14/16] env: fat: support UEFI context
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 00/16] efi_loader: non-volatile variables support
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 01/16] hashtable: extend interfaces to handle entries with context
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 02/16] env: extend interfaces to import/export U-Boot environment per context
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 03/16] env: extend interfaces to label variable with context
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 04/16] env: flash: add U-Boot environment context support
Wolfgang Denk
- [U-Boot] [RFC, PATCH v4 05/16] env: fat: add U-Boot environment context support
Wolfgang Denk
- [U-Boot] [PATCH] rtc: ds3232/ds3231: Add support to generate 32KHz output for driver module
Wolfgang Denk
- [U-Boot] [PATCH V3 0/5] add i.MX8 container loading support
Wolfgang Denk
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Wolfgang Denk
- [U-Boot] [PATCH v2] rtc: ds3232/ds3231: Add support to generate 32KHz output for driver module
Wolfgang Denk
- [U-Boot] [PATCH 2/4] armv8: ls2088aqds: The ls2088aqds board supports the I2C driver model.
Wolfgang Denk
- [U-Boot] [PATCH 2/4] armv8: ls2088aqds: The ls2088aqds board supports the I2C driver model.
Wolfgang Denk
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Wolfgang Denk
- [U-Boot] [PATCH v2 1/4] rtc: ds3232/ds3231: Add support to generate 32KHz output for driver module
Wolfgang Denk
- [U-Boot] [PATCH v2 2/4] armv8: ls2088aqds: The ls2088aqds board supports the I2C driver model.
Wolfgang Denk
- [U-Boot] [PATCH v2 4/4] armv8: ls2088aqds : Add ds3232 node
Wolfgang Denk
- [U-Boot] [PATCH 1/3] armv8: ls1088aqds: The ls1088aqds board supports the I2C driver model.
Wolfgang Denk
- [U-Boot] [PATCH 3/3] armv8: ls1088aqds : Add pcf2127 node
Wolfgang Denk
- [U-Boot] [EXT] Re: [PATCH v2 4/4] armv8: ls2088aqds : Add ds3232 node
Wolfgang Denk
- [U-Boot] [EXT] Re: [PATCH v2 2/4] armv8: ls2088aqds: The ls2088aqds board supports the I2C driver model.
Wolfgang Denk
- [U-Boot] [PATCH v3 2/4] armv8: ls2088aqds: The ls2088aqds board supports the I2C driver model.
Wolfgang Denk
- [U-Boot] Data abort during relocation
Arnout Diels
- [U-Boot] R-Car-gpio0_00-fails-with-“gpio input” command
Tiezhuang Dong
- [U-Boot] 答复: R-Car-gpio0_00-fails-with-“gpio input” command
Tiezhuang Dong
- [U-Boot] [PATCH 18/35] rockchip: rk3288-phycore: move phycore_init() to its own board file
Wadim Egorov
- [U-Boot] [PATCH 1/5] CVE-2019-13103: disk: stop infinite recursion in DOS Partitions
Paul Emge
- [U-Boot] [PATCH 2/5] CVE-2019-13105: ext4: fix double-free in ext4_cache_read
Paul Emge
- [U-Boot] [PATCH 3/5] CVE-2019-13104: ext4: check for underflow in ext4fs_read_file
Paul Emge
- [U-Boot] [PATCH 4/5] ext4: gracefully fail on divide-by-0
Paul Emge
- [U-Boot] [PATCH 5/5] CVE-2019-13106: ext4: fix out-of-bounds memset
Paul Emge
- [U-Boot] [PATCH 1/2] drivers/spi: fsl_qspi: fix controller busy check
Fabio Estevam
- [U-Boot] [PATCH 1/2] drivers/spi: fsl_qspi: fix read timeout
Fabio Estevam
- [U-Boot] [PATCH 2/2] drivers/spi: fsl_qspi: improve timeout calculation
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] board: Add support for iMXQXP AI_ML board
Fabio Estevam
- [U-Boot] [PATCH 1/4] mx6: clock: Allow enable_ipu_clock() to be built for SPL code
Fabio Estevam
- [U-Boot] [PATCH 2/4] mx6: clock: Use setbits_le32()
Fabio Estevam
- [U-Boot] [PATCH 3/4] mx6: clock: Introduce disable_ipu_clock()
Fabio Estevam
- [U-Boot] [PATCH 4/4] mx6: Allow configuring the NoC registers on i.MX6QP
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx6: mx6sabre common: Add distro boot config
Fabio Estevam
- [U-Boot] [PATCH 4/4] mx6: Allow configuring the NoC registers on i.MX6QP
Fabio Estevam
- [U-Boot] [PATCH v1 1/2] pinctrl: nxp: mx6: DM_FLAG_PRE_RELOC by default
Fabio Estevam
- [U-Boot] [PATCH v1 2/2] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes
Fabio Estevam
- [U-Boot] Support for i.MX7ULP rev B0
Fabio Estevam
- [U-Boot] Support for i.MX7ULP rev B0
Fabio Estevam
- [U-Boot] [PATCH 0/5] i.MX7ULP EVK: update ddr script to make board boot
Fabio Estevam
- [U-Boot] Support for i.MX7ULP rev B0
Fabio Estevam
- [U-Boot] [PATCH 01/15] mx7ulp: Add common plugin codes for mx7ulp
Fabio Estevam
- [U-Boot] [PATCH] mx6ulevk: Add support for SDP boot in SPL target
Fabio Estevam
- [U-Boot] [PATCH 1/4] Kconfig: Migrate CONFIG_CSF_SIZE to Kconfig
Fabio Estevam
- [U-Boot] [PATCH 2/4] habv4: tools: Avoid hardcoded CSF size for SPL targets
Fabio Estevam
- [U-Boot] [PATCH 3/4] imx6: spl: Reduce SPL limit size in case CONFIG_SECURE_BOOT is enabled
Fabio Estevam
- [U-Boot] [PATCH 4/4] imx: configs: Cleanup CONFIG_SECURE_BOOT comments
Fabio Estevam
- [U-Boot] [PATCH 1/4] imx: Place imx_ddr_size() into a separate file
Fabio Estevam
- [U-Boot] [PATCH 2/4] imx: mmdc_size: Fix checkpatch warnings
Fabio Estevam
- [U-Boot] [PATCH 3/4] imx: mmdc_size: Allow building it for i.MX7ULP
Fabio Estevam
- [U-Boot] [PATCH 4/4] mx7ulp_evk: Use imx_ddr_size()
Fabio Estevam
- [U-Boot] [PATCH v2] mx6ulevk: Include SDP boot instructions in README
Fabio Estevam
- [U-Boot] [PATCH v3 2/2] board: Add support for iMX8QXP AI_ML board
Fabio Estevam
- [U-Boot] Support for i.MX7ULP rev B0
Fabio Estevam
- [U-Boot] [PATCH RESEND 01/14] imx: i.MX7ULP: add get_boot_device
Fabio Estevam
- [U-Boot] [PATCH v2 3/3] usb: gadget: f_sdp: Allow SPL to load and boot FIT via SDP
Fabio Estevam
- [U-Boot] [PATCH v2 3/3] usb: gadget: f_sdp: Allow SPL to load and boot FIT via SDP
Fabio Estevam
- [U-Boot] [PATCH] mx6sabresd: Reduce overall SPL size
Fabio Estevam
- [U-Boot] [PATCH v1 1/2] pinctrl: nxp: mx6: DM_FLAG_PRE_RELOC by default
Fabio Estevam
- [U-Boot] [PATCH v2 1/3] pinctrl: nxp: DM_FLAG_PRE_RELOC by default
Fabio Estevam
- [U-Boot] [PATCH v2 2/3] ARM: dts: imx6ull-colibri: change hierarchy of DTS files
Fabio Estevam
- [U-Boot] [PATCH v2 3/3] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes
Fabio Estevam
- [U-Boot] imx7d: CPU core issue in secure mode
Fabio Estevam
- [U-Boot] [PATCH v1] test/py: add MMC/SD block write test
Peng Fan
- [U-Boot] [PATCH v1] test/py: add MMC/SD block write test
Peng Fan
- [U-Boot] [PATCH 1/5] imx8: Add lpcg driver for iMX8QM/QXP
Peng Fan
- [U-Boot] [PATCH 2/5] misc: scu_api: Add new APIs for clk-imx8 driver
Peng Fan
- [U-Boot] [PATCH 05/52] tools: imx8m_image: align spl bin image size
Peng Fan
- [U-Boot] buildman cause PC hang for long time
Peng Fan
- [U-Boot] buildman cause PC hang for long time
Peng Fan
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Peng Fan
- [U-Boot] [PATCH V2 00/51] Support i.MX8MM/N
Peng Fan
- [U-Boot] [PATCH V2 01/51] linux: compat: guard PAGE_SIZE
Peng Fan
- [U-Boot] [PATCH V2 02/51] dm: clk: ignore default settings when node not valid
Peng Fan
- [U-Boot] [PATCH V2 03/51] pinctrl: imx: use devfdt_get_addr_size_index
Peng Fan
- [U-Boot] [PATCH V2 04/51] i2c: mxc: add CONFIG_CLK support
Peng Fan
- [U-Boot] [PATCH V2 05/51] tools: imx8m_image: align spl bin image size
Peng Fan
- [U-Boot] [PATCH V2 06/51] ddr: imx8m: fix ddr firmware location when enable SPL OF
Peng Fan
- [U-Boot] [PATCH V2 07/51] tools: imx8mimage: fix HDMI/FIT parsing
Peng Fan
- [U-Boot] [PATCH V2 08/51] imx8m: add image cfg for i.MX8MM lpddr4
Peng Fan
- [U-Boot] [PATCH V2 09/51] imx: add IMX8MQ kconfig entry
Peng Fan
- [U-Boot] [PATCH V2 10/51] imx: add IMX8MM kconfig entry
Peng Fan
- [U-Boot] [PATCH V2 11/51] imx: imx8mm: add clock bindings header
Peng Fan
- [U-Boot] [PATCH V2 12/51] imx: add i.MX8MM cpu type
Peng Fan
- [U-Boot] [PATCH V2 13/51] imx: spl: add spl_board_boot_device for i.MX8MM
Peng Fan
- [U-Boot] [PATCH V2 14/51] imx8m: update imx-regs for i.MX8MM
Peng Fan
- [U-Boot] [PATCH V2 15/51] imx: add get_cpu_rev support for i.MX8MM
Peng Fan
- [U-Boot] [PATCH V2 16/51] imx8m: rename clock to clock_imx8mq
Peng Fan
- [U-Boot] [PATCH V2 17/51] imx8m: restructure clock.h
Peng Fan
- [U-Boot] [PATCH V2 18/51] imx8m: add clk support for i.MX8MM
Peng Fan
- [U-Boot] [PATCH V2 19/51] imx8m: soc: probe clk before relocation
Peng Fan
- [U-Boot] [PATCH V2 20/51] imx8m: add pin header for i.MX8MM
Peng Fan
- [U-Boot] [PATCH V2 21/51] imx: add i.MX8MM PE property
Peng Fan
- [U-Boot] [PATCH V2 22/51] imx8m: Fix MMU table issue for OPTEE memory
Peng Fan
- [U-Boot] [PATCH V2 23/51] imx8m: set BYPASS ID SWAP to avoid AXI bus errors
Peng Fan
- [U-Boot] [PATCH V2 24/51] imx8m: Configure trustzone region 0 for non-secure access
Peng Fan
- [U-Boot] [PATCH V2 25/51] imx8m: soc: enable SCTR clock before timer init
Peng Fan
- [U-Boot] [PATCH V2 26/51] serial: Kconfig: make MXC_UART usable for MX7 and IMX8M
Peng Fan
- [U-Boot] [PATCH V2 27/51] clk: imx: add Kconfig entry for i.MX8MM
Peng Fan
- [U-Boot] [PATCH V2 28/51] clk: imx: add i.MX8MM clk driver
Peng Fan
- [U-Boot] [PATCH V2 29/51] imx: add i.MX8MM EVK board support
Peng Fan
- [U-Boot] [PATCH V2 30/51] ddr: imx8m: Fix ddr4 driver build issue
Peng Fan
- [U-Boot] [PATCH V2 31/51] imx8mq: Update the ddrc QoS setting for B1 chip
Peng Fan
- [U-Boot] [PATCH V2 32/51] driver: ddr: Refine the ddr init driver on imx8m
Peng Fan
- [U-Boot] [PATCH V2 33/51] ddr: imx8m: Fix the ddr init hang on imx8mq
Peng Fan
- [U-Boot] [PATCH V2 34/51] imx: add i.MX8MN kconfig entry
Peng Fan
- [U-Boot] [PATCH V2 35/51] imx8mn: support get_cpu_rev
Peng Fan
- [U-Boot] [PATCH V2 36/51] imx8m: add clk support for i.MX8MN
Peng Fan
- [U-Boot] [PATCH V2 37/51] imx8mn: set BYPASS ID SWAP to avoid AXI bus errors
Peng Fan
- [U-Boot] [PATCH V2 38/51] imx: add i.MX8MN PE property
Peng Fan
- [U-Boot] [PATCH V2 39/51] imx8mn: add pin header
Peng Fan
- [U-Boot] [PATCH V2 40/51] imx: spl: use spl_board_boot_device for i.MX8MN
Peng Fan
- [U-Boot] [PATCH V2 41/51] spl: pass args to board_return_to_bootrom
Peng Fan
- [U-Boot] [PATCH V2 42/51] imx: add rom api support
Peng Fan
- [U-Boot] [PATCH V2 43/51] imx: cpu: restrict get_boot_device
Peng Fan
- [U-Boot] [PATCH V2 44/51] imx8mn: add get_boot_device
Peng Fan
- [U-Boot] [PATCH V2 45/51] tools: imx8mimage: add ROM VERSION
Peng Fan
- [U-Boot] [PATCH V2 46/51] pinctrl: imx8m: support i.MX8MN
Peng Fan
- [U-Boot] [PATCH V2 47/51] tools: imx8m_image: support ddr4 firmware
Peng Fan
- [U-Boot] [PATCH V2 48/51] clk: imx: add i.MX8MN clk support
Peng Fan
- [U-Boot] [PATCH V2 49/51] imx8m: add i.MX8MN ddr4 image cfg file
Peng Fan
- [U-Boot] [PATCH V2 50/51] imx: add dtsi for i.MX8MN
Peng Fan
- [U-Boot] [PATCH V2 51/51] imx: add i.MX8MN DDR4 board support
Peng Fan
- [U-Boot] [PATCH 2/2] Add i.MX7D based Meerkat96 board support
Peng Fan
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Peng Fan
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Peng Fan
- [U-Boot] [PATCH V2 00/51] Support i.MX8MM/N
Peng Fan
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Peng Fan
- [U-Boot] [PATCH V2 18/51] imx8m: add clk support for i.MX8MM
Peng Fan
- [U-Boot] [PATCH V2 18/51] imx8m: add clk support for i.MX8MM
Peng Fan
- [U-Boot] [PATCH v2 07/11] mmc: use the generic timeout for cmd6 (SWITCH) provided in the ext_csd
Peng Fan
- [U-Boot] [PATCH] mmc: rpmb: fix response type of CMD25
Peng Fan
- [U-Boot] [PATCH v3 1/4] mmc: mvebu: Remove unused MMC_CAP.. macros
Peng Fan
- [U-Boot] [PATCH 1/7] mmc: support hs400 enhanced strobe mode
Peng Fan
- [U-Boot] [PATCH 2/7] mmc: Parse HS400 Enhanced strobe DT properties
Peng Fan
- [U-Boot] [PATCH 3/7] mmc: Parse no-1-8-v DT property
Peng Fan
- [U-Boot] [PATCH 4/7] mmc: fsl_esdhc_imx: use mmc_of_parse to set host_caps
Peng Fan
- [U-Boot] [PATCH 5/7] mmc: fsl_esdhc_imx: add HS400 Enhanced strobe support
Peng Fan
- [U-Boot] [PATCH 6/7] mmc: fsl_esdhc_imx: add i.MX8QM compatible
Peng Fan
- [U-Boot] [PATCH 7/7] mmc: fsl_esdhc_imx: enlarge mmc timeout
Peng Fan
- [U-Boot] [PATCH v2 07/11] mmc: use the generic timeout for cmd6 (SWITCH) provided in the ext_csd
Peng Fan
- [U-Boot] [PATCH V2 50/51] imx: add dtsi for i.MX8MN
Peng Fan
- [U-Boot] [PATCH 4/5] toradex: configblock: fix apalis imx8 target
Peng Fan
- [U-Boot] [PATCH V2 04/51] i2c: mxc: add CONFIG_CLK support
Peng Fan
- [U-Boot] [PATCH V2 18/51] imx8m: add clk support for i.MX8MM
Peng Fan
- [U-Boot] [PATCH V2 50/51] imx: add dtsi for i.MX8MN
Peng Fan
- [U-Boot] [PATCH 4/5] toradex: configblock: fix apalis imx8 target
Peng Fan
- [U-Boot] [PATCH V2 1/7] mmc: support hs400 enhanced strobe mode
Peng Fan
- [U-Boot] [PATCH V2 2/7] mmc: Parse HS400 Enhanced strobe DT properties
Peng Fan
- [U-Boot] [PATCH V2 3/7] mmc: Parse no-1-8-v DT property
Peng Fan
- [U-Boot] [PATCH V2 4/7] mmc: fsl_esdhc_imx: use mmc_of_parse to set host_caps
Peng Fan
- [U-Boot] [PATCH V2 5/7] mmc: fsl_esdhc_imx: add HS400 Enhanced strobe support
Peng Fan
- [U-Boot] [PATCH V2 6/7] mmc: fsl_esdhc_imx: add i.MX8QM compatible
Peng Fan
- [U-Boot] [PATCH V2 7/7] mmc: fsl_esdhc_imx: enlarge mmc timeout
Peng Fan
- [U-Boot] [PATCH 1/7] mmc: support hs400 enhanced strobe mode
Peng Fan
- [U-Boot] [PATCH V2 51/51] imx: add i.MX8MN DDR4 board support
Peng Fan
- [U-Boot] [PATCH v2 2/2] regulator: Allow enabling GPIO regulator
Peng Fan
- [U-Boot] [PATCH v1 11/11] mmc: retry a few times if a partition switch failed
Peng Fan
- [U-Boot] [PATCH v3 3/6] mmc: mmc_spi: Re-write driver using DM framework
Peng Fan
- [U-Boot] [PATCH V2 04/51] i2c: mxc: add CONFIG_CLK support
Peng Fan
- [U-Boot] [PATCH v3 3/6] mmc: mmc_spi: Re-write driver using DM framework
Peng Fan
- [U-Boot] [PATCH v3 3/6] mmc: mmc_spi: Re-write driver using DM framework
Peng Fan
- [U-Boot] imx7d: CPU core issue in secure mode
Peng Fan
- [U-Boot] [PATCH v2 2/2] board: Add support for iMXQXP AI_ML board
Peng Fan
- [U-Boot] [PATCH v2 1/2] arm: dts: Add devicetree support for iMXQXP AI_ML board
Peng Fan
- [U-Boot] [PATCH 4/4] mx6: Allow configuring the NoC registers on i.MX6QP
Peng Fan
- [U-Boot] [PATCH] dm: device: make power domain calls optional
Peng Fan
- [U-Boot] [PATCH v2 1/2] dm: core: device: switch off power domain after device removal
Peng Fan
- [U-Boot] [PATCH v2 2/2] serial: lpuart: request dm device removal when booting OS
Peng Fan
- [U-Boot] [PATCH] mmc: fsl_esdhc_imx: fix config check issue when building in SPL
Peng Fan
- [U-Boot] [PATCH v3 2/6] mmc: skip select_mode_and_width for MMC SPI host
Peng Fan
- [U-Boot] [PATCH v3 3/6] mmc: mmc_spi: Re-write driver using DM framework
Peng Fan
- [U-Boot] [PATCH v3 4/6] cmd: Remove mmc_spi command
Peng Fan
- [U-Boot] [PATCH V2 1/7] mmc: support hs400 enhanced strobe mode
Peng Fan
- [U-Boot] Please pull u-boot-mmc
Peng Fan
- [U-Boot] Please pull u-boot-mmc
Peng Fan
- [U-Boot] [PATCH 1/4] mx6: clock: Allow enable_ipu_clock() to be built for SPL code
Peng Fan
- [U-Boot] [PATCH 2/4] mx6: clock: Use setbits_le32()
Peng Fan
- [U-Boot] [PATCH 3/4] mx6: clock: Introduce disable_ipu_clock()
Peng Fan
- [U-Boot] [PATCH 4/4] mx6: Allow configuring the NoC registers on i.MX6QP
Peng Fan
- [U-Boot] [PATCH 1/4] imx8: scu_api: add sc_pm_get_resource_power_mode
Peng Fan
- [U-Boot] [PATCH 2/4] imx: scu_api: add sc_pm_cpu_start
Peng Fan
- [U-Boot] [PATCH 3/4] imx: Kconfig: make bootaux available for i.MX8M
Peng Fan
- [U-Boot] [PATCH 4/4] imx8: add bootaux support
Peng Fan
- [U-Boot] Question regarding the Common Clock Framework CCF v5 patches
Peng Fan
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Peng Fan
- [U-Boot] [PATCH 1/5] arm: dts: sync dts for i.MX6UL
Peng Fan
- [U-Boot] [PATCH 2/5] arm: dts: sync dts for i.MX6ULL
Peng Fan
- [U-Boot] [PATCH 3/5] arm: dts: import dts for i.MX6ULZ
Peng Fan
- [U-Boot] [PATCH 4/5] imx: add i.MX6ULZ cpu type
Peng Fan
- [U-Boot] [PATCH 5/5] imx: add i.MX6ULZ board
Peng Fan
- [U-Boot] Support for i.MX7ULP rev B0
Peng Fan
- [U-Boot] [PATCH 1/4] imx: spl: Change USB boot device type
Peng Fan
- [U-Boot] [PATCH 1/4] imx: spl: Change USB boot device type
Peng Fan
- [U-Boot] Support for i.MX7ULP rev B0
Peng Fan
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Peng Fan
- [U-Boot] Support for i.MX7ULP rev B0
Peng Fan
- [U-Boot] [PATCH 1/4] imx: add module fuse support
Peng Fan
- [U-Boot] [PATCH 2/4] i2c: mxc: add fuse check
Peng Fan
- [U-Boot] [PATCH 3/4] usb: mx6: add fuse check
Peng Fan
- [U-Boot] [PATCH 4/4] net: fec: add fuse check
Peng Fan
- [U-Boot] pmic_get() broken after 4213609cc7("drivers: core: use strcmp when find device by name")
Peng Fan
- [U-Boot] [PATCH RESEND 01/14] imx: i.MX7ULP: add get_boot_device
Peng Fan
- [U-Boot] [PATCH RESEND 02/14] i.MX7ULP: evk: Modify FDT file to disable SD3.0 for usb boot
Peng Fan
- [U-Boot] [PATCH RESEND 03/14] i.MX7ULP: Fix system reset after a7 rtc alarm expired.
Peng Fan
- [U-Boot] [PATCH RESEND 04/14] i.MX7ULP: Correct the clock index
Peng Fan
- [U-Boot] [PATCH RESEND 05/14] i.MX7ULP: Fix PCC register bits mask and offset issue
Peng Fan
- [U-Boot] [PATCH RESEND 06/14] i.MX7ULP: Add CONFIG_MX7ULP to kconfig
Peng Fan
- [U-Boot] [PATCH RESEND 07/14] i.MX7ULP: Fix wrong i2c configuration name
Peng Fan
- [U-Boot] [PATCH RESEND 08/14] misc: Kconfig: make i.MX7ULP could use MXC_OCOTP
Peng Fan
- [U-Boot] [PATCH RESEND 09/14] i.MX7ULP: evk: Enable fuse comamnd
Peng Fan
- [U-Boot] [PATCH RESEND 10/14] i.MX7ULP: Fix SPLL/APLL clock rate calculation issue
Peng Fan
- [U-Boot] [PATCH RESEND 11/14] i.MX7ULP: Workaround APLL PFD2 to 345.6Mhz
Peng Fan
- [U-Boot] [PATCH RESEND 12/14] i.MX7ULP: Add CPU revision check for B0
Peng Fan
- [U-Boot] [PATCH RESEND 13/14] i.MX7ULP: Set A7 core frequency to 500Mhz for B0 chip
Peng Fan
- [U-Boot] [PATCH RESEND 14/14] i.MX7ULP: Change clock rate calculation for NIC1 BUS and EXT
Peng Fan
- [U-Boot] [PATCH V3 0/5] add i.MX8 container loading support
Peng Fan
- [U-Boot] [PATCH V3 1/5] imx8: support parsing i.MX8 Container file
Peng Fan
- [U-Boot] [PATCH V3 2/5] spl: mmc: support loading i.MX container format file
Peng Fan
- [U-Boot] [PATCH V3 3/5] imx: add container target
Peng Fan
- [U-Boot] [PATCH V3 4/5] imx8qxp_mek: switch to use container image
Peng Fan
- [U-Boot] [PATCH V3 5/5] imx8qm_mek: switch to use container image
Peng Fan
- [U-Boot] [PATCH V3 0/5] add i.MX8 container loading support
Peng Fan
- [U-Boot] [PATCH V3 0/5] add i.MX8 container loading support
Peng Fan
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Peng Fan
- [U-Boot] [PATCH 01/16] clk: introduce clk_dev_binded
Peng Fan
- [U-Boot] [PATCH 02/16] clk: use clk_dev_binded
Peng Fan
- [U-Boot] [PATCH 03/16] clk: mux: add set parent support
Peng Fan
- [U-Boot] [PATCH 04/16] clk: export mux/divider ops
Peng Fan
- [U-Boot] [PATCH 05/16] clk: add clk-gate support
Peng Fan
- [U-Boot] [PATCH 06/16] clk: divider set rate supporrt
Peng Fan
- [U-Boot] [PATCH 07/16] clk: fixed_rate: export clk_fixed_rate
Peng Fan
- [U-Boot] [PATCH 08/16] clk: imx: import clk heplers
Peng Fan
- [U-Boot] [PATCH 09/16] clk: imx: gate2 add set rate
Peng Fan
- [U-Boot] [PATCH 10/16] dm: clk: ignore default settings when node not valid
Peng Fan
- [U-Boot] [PATCH 11/16] clk: add composite clk support
Peng Fan
- [U-Boot] [PATCH 12/16] clk-provider: include clk-uclass.h
Peng Fan
- [U-Boot] [PATCH 13/16] clk: gate: support sandbox
Peng Fan
- [U-Boot] [PATCH 14/16] clk: sandbox: add composite clk
Peng Fan
- [U-Boot] [PATCH 15/16] test: dm: clk_ccf: test composite clk
Peng Fan
- [U-Boot] [PATCH 16/16] configs: sandbox: Enable composite clk
Peng Fan
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Peng Fan
- [U-Boot] [PATCH 4/4] net: fec: add fuse check
Peng Fan
- [U-Boot] [PATCH V2 1/4] imx: add module fuse support
Peng Fan
- [U-Boot] [PATCH V2 2/4] i2c: mxc: add fuse check
Peng Fan
- [U-Boot] [PATCH V2 3/4] usb: mx6: add fuse check
Peng Fan
- [U-Boot] [PATCH V2 4/4] net: fec: add fuse check
Peng Fan
- [U-Boot] [PATCH] mmc: relocate code comment
Peng Fan
- [U-Boot] [PATCH] mmd: sdhci: fix non GPIO card detect
Peng Fan
- [U-Boot] [PATCH] mmc: sdhci: fix chip detect gpio property name
Peng Fan
- [U-Boot] [PATCH] mx6sabresd: Reduce overall SPL size
Peng Fan
- [U-Boot] [PATCH] mmd: sdhci: fix non GPIO card detect
Peng Fan
- [U-Boot] [PATCH u-boot-mmc 1/1] mmc: sdhci: Read cd-gpios instead of cd-gpio from devicetree
Peng Fan
- [U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode
Peng Fan
- [U-Boot] [PATCH] mmc: sti_sdhci: Fix sdhci_setup_cfg() call.
Peng Fan
- [U-Boot] [PATCH v1] test/py: add MMC/SD block write test
Peng Fan
- [U-Boot] [PATCH] mmc: mv_sdhci: fix uninitialized pointer deref on probe
Peng Fan
- [U-Boot] [PATCH] mmc: sdhci: fix chip detect gpio property name
Peng Fan
- [U-Boot] [PATCH 1/4] imx: add module fuse support
Peng Fan
- [U-Boot] [PATCH] arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio command
Peng Fan
- [U-Boot] [PATCH] i2c: imx_lpi2c: add ipg clk
Peng Fan
- [U-Boot] [PATCH 1/4] imx: add module fuse support
Peng Fan
- [U-Boot] [PATCH v4 1/2] arm: dts: Add devicetree support for iMXQXP AI_ML board
Peng Fan
- [U-Boot] [PATCH 01/16] clk: introduce clk_dev_binded
Peng Fan
- [U-Boot] [PATCH 01/16] clk: introduce clk_dev_binded
Peng Fan
- [U-Boot] [PATCH] i2c: imx_lpi2c: add ipg clk
Peng Fan
- [U-Boot] [PATCH v3] dw_mmc: turn on the IO supply
Peng Fan
- [U-Boot] [PATCH] spl_mmc: always use find_mmc_device() to get mmc handler
Peng Fan
- [U-Boot] [PATCH 01/16] clk: introduce clk_dev_binded
Peng Fan
- [U-Boot] [PATCH V2 01/16] clk: introduce clk_dev_binded
Peng Fan
- [U-Boot] [PATCH V2 02/16] clk: use clk_dev_binded
Peng Fan
- [U-Boot] [PATCH V2 03/16] clk: mux: add set parent support
Peng Fan
- [U-Boot] [PATCH V2 04/16] clk: export mux/divider ops
Peng Fan
- [U-Boot] [PATCH V2 05/16] clk: add clk-gate support
Peng Fan
- [U-Boot] [PATCH V2 06/16] clk: divider set rate supporrt
Peng Fan
- [U-Boot] [PATCH V2 07/16] clk: fixed_rate: export clk_fixed_rate
Peng Fan
- [U-Boot] [PATCH V2 08/16] clk: imx: import clk heplers
Peng Fan
- [U-Boot] [PATCH V2 09/16] clk: imx: gate2 add set rate
Peng Fan
- [U-Boot] [PATCH V2 10/16] dm: clk: ignore default settings when node not valid
Peng Fan
- [U-Boot] [PATCH V2 11/16] clk: add composite clk support
Peng Fan
- [U-Boot] [PATCH V2 12/16] clk-provider: include clk-uclass.h
Peng Fan
- [U-Boot] [PATCH V2 13/16] clk: gate: support sandbox
Peng Fan
- [U-Boot] [PATCH V2 14/16] clk: sandbox: add composite clk
Peng Fan
- [U-Boot] [PATCH V2 15/16] test: dm: clk_ccf: test composite clk
Peng Fan
- [U-Boot] [PATCH V2 16/16] configs: sandbox: Enable composite clk
Peng Fan
- [U-Boot] [PATCH 01/16] clk: introduce clk_dev_binded
Peng Fan
- [U-Boot] [PATCH V3 01/16] clk: introduce clk_dev_binded
Peng Fan
- [U-Boot] [PATCH V3 02/16] clk: use clk_dev_binded
Peng Fan
- [U-Boot] [PATCH V3 03/16] clk: mux: add set parent support
Peng Fan
- [U-Boot] [PATCH V3 04/16] clk: export mux/divider ops
Peng Fan
- [U-Boot] [PATCH V3 05/16] clk: add clk-gate support
Peng Fan
- [U-Boot] [PATCH V3 06/16] clk: divider set rate supporrt
Peng Fan
- [U-Boot] [PATCH V3 07/16] clk: fixed_rate: export clk_fixed_rate
Peng Fan
- [U-Boot] [PATCH V3 08/16] clk: imx: import clk heplers
Peng Fan
- [U-Boot] [PATCH V3 09/16] clk: imx: gate2 add set rate
Peng Fan
- [U-Boot] [PATCH V3 10/16] dm: clk: ignore default settings when node not valid
Peng Fan
- [U-Boot] [PATCH V3 11/16] clk-provider: include clk-uclass.h
Peng Fan
- [U-Boot] [PATCH V3 12/16] clk: add composite clk support
Peng Fan
- [U-Boot] [PATCH V3 13/16] clk: gate: support sandbox
Peng Fan
- [U-Boot] [PATCH V3 14/16] configs: sandbox: Enable composite clk
Peng Fan
- [U-Boot] [PATCH V3 15/16] clk: sandbox: add composite clk
Peng Fan
- [U-Boot] [PATCH V3 16/16] test: dm: clk_ccf: test composite clk
Peng Fan
- [U-Boot] [PATCH] imx: mx6slevk: enable DM_SPI and DM_SPI_FLASH
Peng Fan
- [U-Boot] Please pull u-boot-mmc
Peng Fan
- [U-Boot] [PATCH] Fix RK3328-evb Floating GPIO0_D6 - pull up - 4ma
Mister Fix-IT
- [U-Boot] [PATCH] ARM: am3517-evm: Remove undefined pinmuxing
Adam Ford
- [U-Boot] [PATCH] ARM: am3517_evm: Fix pin muxing to enable EHCI Host in the future
Adam Ford
- [U-Boot] [PATCH] ARM: da850evm: Remove legacy OHCI referencs and unify platform
Adam Ford
- [U-Boot] [PATCH 1/2] usb: musb-new: Add DA8xx MUSB Glue and enable Host mode
Adam Ford
- [U-Boot] [PATCH 2/2] ARM: da850-evm: Enable MUSB USB 2.0 Controller
Adam Ford
- [U-Boot] [PATCH 1/2] usb: musb-new: Add DA8xx MUSB Glue and enable Host mode
Adam Ford
- [U-Boot] UUID returning 00000000 in 2019.07
Adam Ford
- [U-Boot] [PATCH 13/14] davinci: omapl138-lcdk: enable driver-model in SPL
Adam Ford
- [U-Boot] UUID returning 00000000 in 2019.07
Adam Ford
- [U-Boot] [PATCH 13/14] davinci: omapl138-lcdk: enable driver-model in SPL
Adam Ford
- [U-Boot] [PATCH V2 1/3] phy: Add support for phy-da8xx-usb
Adam Ford
- [U-Boot] [PATCH V2 2/3] usb: musb-new: Add support for da8xx-musb
Adam Ford
- [U-Boot] [PATCH V2 3/3] ARM: da850-evm: Enable the USB PHY and MUSB Driver
Adam Ford
- [U-Boot] ofnode -> udevice question
Adam Ford
- [U-Boot] OMAP GPMC Controller U-Boot Class Type
Adam Ford
- [U-Boot] [PATCH 1/3] spl: imx6: Let spl_boot_device return USDHC1 or USDHC2
Adam Ford
- [U-Boot] [PATCH] ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS
Adam Ford
- [U-Boot] [PATCH] ARM: omap3/omap35_logic: Fix broken Logic PD Torpedo booting
Adam Ford
- [U-Boot] [PATCH V2 2/3] usb: musb-new: Add support for da8xx-musb
Adam Ford
- [U-Boot] [PATCH] ARM: da850-evm: Remove dead/unneeded code
Adam Ford
- [U-Boot] TI aemif controller on Davinci DT question
Adam Ford
- [U-Boot] [PATCH 1/3] spi: Add spi_write_then_read
Adam Ford
- [U-Boot] Updating uboot from 2015.04 to 2017.03 - doubts and other questions
Adam Ford
- [U-Boot] [PATCH] ARM: dts: imx6q-logicpd: Add imx6q-logicpd-u-boot for SPL
Adam Ford
- [U-Boot] [PATCH] ARM: da850evm: Split MTDPARTS into SPL and u-boot
Adam Ford
- [U-Boot] [PATCH] ARM: da850-evm: Replace CMD_SF with CMD_MTD
Adam Ford
- [U-Boot] [PATCH] ARM: am3517-evm: Remove undefined pinmuxing
Adam Ford
- [U-Boot] [PATCH] usb: ehci-omap: Add Support DM_USB and OF_CONTROL
Adam Ford
- [U-Boot] [PATCH] usb: ehci-omap: Add Support DM_USB and OF_CONTROL
Adam Ford
- [U-Boot] [PATCH] ARM: da850_am18xxevm: Remove config and references
Adam Ford
- [U-Boot] [PATCH] usb: ehci-omap: Add Support DM_USB and OF_CONTROL
Adam Ford
- [U-Boot] [RESEND PATCH v2 01/13] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
Adam Ford
- [U-Boot] [PATCH] usb: ehci-omap: Add Support DM_USB and OF_CONTROL
Adam Ford
- [U-Boot] [RESEND PATCH v2 08/13] davinci: da850-evm: enable driver model for NAND
Adam Ford
- [U-Boot] [PATCH] ARM: dts: da850-evm: Fix MDIO pinmux
Adam Ford
- [U-Boot] [PATCH] ARM: da850-evm: Remove references to CONFIG_DA850_AM18X_EVM
Adam Ford
- [U-Boot] [PATCH] Revert "ARM: davinci: da850: Manual pinmux only when PINCTRL not available"
Adam Ford
- [U-Boot] What is the status of rk3066 support?
Arthur Helfstein Fragoso
- [U-Boot] What is the status of rk3066 support?
Arthur Helfstein Fragoso
- [U-Boot] [PATCH v7 7/9] riscv: sifive: fu540: Setup ethaddr env variable using OTP
Alistair Francis
- [U-Boot] [PATCH 01/14] net: davinci_emac: convert to using the driver model
Ramon Fried
- [U-Boot] [PATCH v7 7/9] riscv: sifive: fu540: Setup ethaddr env variable using OTP
Ramon Fried
- [U-Boot] [PATCH v3 4/4] test: pci_ep: add basic pci_ep tests
Ramon Fried
- [U-Boot] [PATCH] test: Disable pci_ep test for now
Ramon Fried
- [U-Boot] [PATCH] net/macb: increase RX buffer size for GEM
Ramon Fried
- [U-Boot] [PATCH v2] net/macb: increase RX buffer size for GEM
Ramon Fried
- [U-Boot] [PATCH] disk: efi: avoid unaligned pointer error
Ramon Fried
- [U-Boot] [PATCH] travis.yml: change Ubuntu version to xenial
Ramon Fried
- [U-Boot] [PATCH] travis.yml: change Ubuntu version to xenial
Ramon Fried
- [U-Boot] [PATCH] travis.yml: change Ubuntu version to xenial
Ramon Fried
- [U-Boot] [PATCH v7 7/9] riscv: sifive: fu540: Setup ethaddr env variable using OTP
Ramon Fried
- [U-Boot] [PATCH v3 1/2] net: introduce packet capture support
Ramon Fried
- [U-Boot] [PATCH] pci_ep: fix wrong addressing to barno
Ramon Fried
- [U-Boot] test.py failure in test_ut[ut_dm_pci_ep_base]
Ramon Fried
- [U-Boot] [PATCH 1/6] net: macb: sync header definitions as taken from Linux
Ramon Fried
- [U-Boot] [PATCH 1/6] net: macb: sync header definitions as taken from Linux
Ramon Fried
- [U-Boot] [PATCH 1/6] net: macb: sync header definitions as taken from Linux
Ramon Fried
- [U-Boot] [PATCH v2] net/macb: increase RX buffer size for GEM
Ramon Fried
- [U-Boot] [PATCH 1/6] net: macb: sync header definitions as taken from Linux
Ramon Fried
- [U-Boot] [PATCH v2 1/6] net: macb: sync header definitions as taken from Linux
Ramon Fried
- [U-Boot] [PATCH 2/6] net: macb: add support for faster clk rates
Ramon Fried
- [U-Boot] [PATCH 3/6] net: macb: use bit access macro from header file
Ramon Fried
- [U-Boot] [PATCH 4/6] net: macb: add support for SGMII phy interface
Ramon Fried
- [U-Boot] [PATCH 5/6] net: macb: add dma_burst_length config
Ramon Fried
- [U-Boot] [PATCH 6/6] net: macb: apply sane DMA configuration
Ramon Fried
- [U-Boot] [PATCH v2 2/6] net: macb: add support for faster clk rates
Ramon Fried
- [U-Boot] [PATCH v2 3/6] net: macb: use bit access macro from header file
Ramon Fried
- [U-Boot] [PATCH v2 4/6] net: macb: add support for SGMII phy interface
Ramon Fried
- [U-Boot] [PATCH v2 5/6] net: macb: add dma_burst_length config
Ramon Fried
- [U-Boot] [PATCH v2 6/6] net: macb: apply sane DMA configuration
Ramon Fried
- [U-Boot] pci_ep dm test failure
Ramon Fried
- [U-Boot] [PATCH] travis.yml: change Ubuntu version to xenial
Ramon Fried
- [U-Boot] [PATCH] travis.yml: change Ubuntu version to xenial
Ramon Fried
- [U-Boot] [PATCH v3 1/2] net: introduce packet capture support
Ramon Fried
- [U-Boot] [PATCH v4 1/3] net: introduce packet capture support
Ramon Fried
- [U-Boot] [PATCH v4 2/3] doc: pcap: add pcap cmd documentation
Ramon Fried
- [U-Boot] [PATCH v4 3/3] configs: sandbox: enable PCAP capture cmd
Ramon Fried
- [U-Boot] Hi, I am new to U-Boot, how do I get started?
Ramon Fried
- [U-Boot] [PATCH] pci_ep: Fix Coverity warning
Ramon Fried
- [U-Boot] [PATCH] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)
Schrempf Frieder
- [U-Boot] [PATCH 05/52] tools: imx8m_image: align spl bin image size
Schrempf Frieder
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Schrempf Frieder
- [U-Boot] [PATCH V2 00/51] Support i.MX8MM/N
Schrempf Frieder
- [U-Boot] [PATCH V2 04/51] i2c: mxc: add CONFIG_CLK support
Schrempf Frieder
- [U-Boot] [PATCH V2 28/51] clk: imx: add i.MX8MM clk driver
Schrempf Frieder
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Schrempf Frieder
- [U-Boot] [PATCH V3 0/5] add i.MX8 container loading support
Schrempf Frieder
- [U-Boot] [PATCH V3 0/5] add i.MX8 container loading support
Schrempf Frieder
- [U-Boot] [PATCH 1/4] imx: add module fuse support
Schrempf Frieder
- [U-Boot] [PATCH] board: amlogic: vim: Fix README
Andreas Färber
- [U-Boot] [PATCH] board: amlogic: vim: Fix README
Andreas Färber
- [U-Boot] [PATCH] ARM: exynos5: Try to boot on mmc2 before mmc0/1
Guillaume GARDET
- [U-Boot] [PATCH 2/2] rtc: Add rtc driver for stm32mp1
Benjamin Gaignard
- [U-Boot] [PATCH v2] rtc: Add rtc driver for stm32mp1
Benjamin Gaignard
- [U-Boot] [PATCH v3 0/2] Add RTC driver for STM32MP1
Benjamin Gaignard
- [U-Boot] [PATCH v3 1/2] clk: stm32mp1: Add RTC clock entry
Benjamin Gaignard
- [U-Boot] [PATCH v3 2/2] rtc: Add rtc driver for stm32mp1
Benjamin Gaignard
- [U-Boot] [PATCH v4 0/6] Add spi-mem driver for MediaTek MT7629 SoC
Weijie Gao
- [U-Boot] [PATCH v4 1/6] mtd: spi-nor: add watchdog reset to flash operation loops
Weijie Gao
- [U-Boot] [PATCH v4 2/6] spi: remove obsolete mtk_qspi driver
Weijie Gao
- [U-Boot] [PATCH v4 3/6] spi: add spi-mem driver for MediaTek MT7629 SoC
Weijie Gao
- [U-Boot] [PATCH v4 4/6] arm: dts: change MT7629 to use spi-mem rather than qspi
Weijie Gao
- [U-Boot] [PATCH v4 5/6] configs: mt7629_rfb: change MTK_QSPI to MTK_SNFI_SPI
Weijie Gao
- [U-Boot] [PATCH 6/6] MAINTAINERS: change spi driver entry
Weijie Gao
- [U-Boot] [PATCH] arm: mediatek: add missing arch timer configuration for MT7629
Weijie Gao
- [U-Boot] [PATCH 1/3] arm: dts: MediaTek: fix clock order for timer0 node of mt7629.dtsi
Weijie Gao
- [U-Boot] [PATCH 2/3] configs: mt7629_rfb: use arm arch timer instead of mtk timer
Weijie Gao
- [U-Boot] [PATCH 3/3] arm: dts: MediaTek: remove tick-timer from mt7629.dtsi
Weijie Gao
- [U-Boot] [PATCH] blk: Invalidate block cache when switching hwpart
Weijie Gao
- [U-Boot] [PATCH v4 0/6] Add spi-mem driver for MediaTek MT7629 SoC
Weijie Gao
- [U-Boot] [PATCH v4 0/6] Add spi-mem driver for MediaTek MT7629 SoC
Weijie Gao
- [U-Boot] [PATCH] mmc: mtk-sd: add WATCHDOG_RESET() to prevent watchdog timeout
Weijie Gao
- [U-Boot] [PATCH v5 0/5] Add spi-mem driver for MediaTek MT7629 SoC
Weijie Gao
- [U-Boot] [PATCH v5 1/5] spi: remove obsolete mtk_qspi driver
Weijie Gao
- [U-Boot] [PATCH v5 2/5] spi: add spi-mem driver for MediaTek MT7629 SoC
Weijie Gao
- [U-Boot] [PATCH v5 3/5] arm: dts: change MT7629 to use spi-mem rather than qspi
Weijie Gao
- [U-Boot] [PATCH v5 4/5] configs: mt7629_rfb: change MTK_QSPI to MTK_SNFI_SPI
Weijie Gao
- [U-Boot] [PATCH v5 5/5] MAINTAINERS: change spi driver entry
Weijie Gao
- [U-Boot] [PATCH] rockchip: derive ethaddr from cpuid
Rohan Garg
- [U-Boot] [PATCH] rockchip: derive ethaddr from cpuid
Rohan Garg
- [U-Boot] [PATCH] rockchip: derive ethaddr from cpuid
Rohan Garg
- [U-Boot] [PATCH 1/3] rockchip: rk3399: derive ethaddr from cpuid
Rohan Garg
- [U-Boot] [PATCH 2/3] rockchip: rk3399: Enable CONFIG_MISC_INIT_R for the Rock PI 4
Rohan Garg
- [U-Boot] [PATCH 3/3] board: puma: Use rockchip_* helpers to setup cpuid and macaddr
Rohan Garg
- [U-Boot] [PATCH v2 1/3] rockchip: rk3399: derive ethaddr from cpuid
Rohan Garg
- [U-Boot] [PATCH v2 2/3] rockchip: rk3399: Enable CONFIG_MISC_INIT_R for the Rock PI 4
Rohan Garg
- [U-Boot] [PATCH v2 3/3] board: puma: Use rockchip_* helpers to setup cpuid and macaddr
Rohan Garg
- [U-Boot] [PATCH v2 1/3] rockchip: rk3399: derive ethaddr from cpuid
Rohan Garg
- [U-Boot] [PATCH v3 1/3] rockchip: rk3399: derive ethaddr from cpuid
Rohan Garg
- [U-Boot] [PATCH v3 2/3] rockchip: rk3399: Enable CONFIG_MISC_INIT_R for the Rock PI 4
Rohan Garg
- [U-Boot] [PATCH v3 3/3] board: puma: Use rockchip_* helpers to setup cpuid and macaddr
Rohan Garg
- [U-Boot] [PATCH v3 3/3] board: puma: Use rockchip_* helpers to setup cpuid and macaddr【请注意,邮件由u-boot-bounces at lists.denx.de代发】 setup cpuid and macaddr
Rohan Garg
- [U-Boot] [PATCH 1/5] armv8: fsl-layerscape: add missing sec jr base address defines
Horia Geanta
- [U-Boot] [PATCH 3/5] armv8: fsl-layerscape: make icid setup endianness aware
Horia Geanta
- [U-Boot] [PATCH 4/5] armv8: ls1088a: add icid setup for platform devices
Horia Geanta
- [U-Boot] [PATCH 5/5] armv8: ls1028a: add icid setup for platform devices
Horia Geanta
- [U-Boot] [PATCH 00/16] Raspberry Pi 32/64 support
Andrei Gherzan
- [U-Boot] [PATCH v2 0/8] Raspberry Pi 32/64 support
Andrei Gherzan
- [U-Boot] [PATCH v2 1/8] RPI: Add defconfigs for rpi4 (32/64)
Andrei Gherzan
- [U-Boot] [PATCH v2 2/8] ARM: bcm283x: Add BCM283x_BASE define
Andrei Gherzan
- [U-Boot] [PATCH v2 3/8] ARM: bcm283x: Define configs for RaspberryPi 4
Andrei Gherzan
- [U-Boot] [PATCH v2 4/8] RPI: Add entry for Raspberry Pi 4 model B
Andrei Gherzan
- [U-Boot] [PATCH v2 5/8] ARM: bcm283x: Include definition for additional emmc clock
Andrei Gherzan
- [U-Boot] [PATCH v2 6/8] mmc: bcm283x: Add support for bcm2711 device in bcm2835_sdhci
Andrei Gherzan
- [U-Boot] [PATCH v2 7/8] RPI: Add memory map for bcm2838
Andrei Gherzan
- [U-Boot] [PATCH v2 8/8] git-mailrc: Add rpi and bcm283x maintainer
Andrei Gherzan
- [U-Boot] [PATCH v2 2/8] ARM: bcm283x: Add BCM283x_BASE define
Andrei Gherzan
- [U-Boot] [PATCH 00/26] binman: Allow reading of images to list contents
Simon Glass
- [U-Boot] [PATCH 01/26] binman: Simplify the entry test
Simon Glass
- [U-Boot] [PATCH 02/26] binman: Update future features
Simon Glass
- [U-Boot] [PATCH 03/26] binman: Update help for new features
Simon Glass
- [U-Boot] [PATCH 04/26] binman: Add an FDT map
Simon Glass
- [U-Boot] [PATCH 05/26] binman: Add an image header
Simon Glass
- [U-Boot] [PATCH 06/26] binman: Allow cbfstool to be optional with tests
Simon Glass
- [U-Boot] [PATCH 07/26] binman: Convert to use ArgumentParser
Simon Glass
- [U-Boot] [PATCH 08/26] binman: Move compression into the Entry base class
Simon Glass
- [U-Boot] [PATCH 09/26] binman: Drop an unused arg in Entry.Lookup()
Simon Glass
- [U-Boot] [PATCH 10/26] binman: Allow easy importing of entry modules
Simon Glass
- [U-Boot] [PATCH 11/26] binman: Fix up ProcessUpdateContents error and comments
Simon Glass
- [U-Boot] [PATCH 12/26] binman: Call ProcessUpdateContents() consistently
Simon Glass
- [U-Boot] [PATCH 13/26] binman: Add a return value to ProcessContentsUpdate()
Simon Glass
- [U-Boot] [PATCH 14/26] binman: Add a control for post-pack entry expansion
Simon Glass
- [U-Boot] [PATCH 15/26] binman: Allow entries to expand after packing
Simon Glass
- [U-Boot] [PATCH 16/26] binman: Allow device-tree entries to be compressed
Simon Glass
- [U-Boot] [PATCH 17/26] binman: Provide the actual data address for cbfs files
Simon Glass
- [U-Boot] [PATCH 18/26] binman: Use the cbfs memlen field only for uncompressed length
Simon Glass
- [U-Boot] [PATCH 19/26] binman: Add a comment about CBFS test structure
Simon Glass
- [U-Boot] [PATCH 20/26] binman: Support FDT update for CBFS
Simon Glass
- [U-Boot] [PATCH 21/26] binman: Detect bad CBFS file types
Simon Glass
- [U-Boot] [PATCH 22/26] binman: Allow listing the entries in an image
Simon Glass
- [U-Boot] [PATCH 23/26] binman: Support reading in firmware images
Simon Glass
- [U-Boot] [PATCH 24/26] binman: Support locating an image header
Simon Glass
- [U-Boot] [PATCH 25/26] binman: Support reading an image into an Image object
Simon Glass
- [U-Boot] [PATCH 26/26] binman: Support listing an image
Simon Glass
- [U-Boot] [U-Boot-Custodians] [U-Boot-Board-Maintainers] [ANN] U-Boot v2019.07-rc4 released
Simon Glass
- [U-Boot] [PATCH] test/py: avb: Move AVB test to android dir
Simon Glass
- [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().【请注意,邮件由u-boot-bounces at lists.denx.de代发】 addr_aligned().
Simon Glass
- [U-Boot] [EXT] Re: [PATCH 1/2] dm: i2c: Add a flag that need generate stop bit
Simon Glass
- [U-Boot] [EXT] Re: [PATCH v2 1/3] dm: i2c: Add a flag that needs to generate a stop bit
Simon Glass
- [U-Boot] [PATCH v1 1/3] usb: dwc3-generic: remove dm_scan_fdt_dev() from the remove() callback
Simon Glass
- [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意,邮件由sjg at google.com代发】
Simon Glass
- [U-Boot] [RFC 2/2] sandbox: Update dts files
Simon Glass
- [U-Boot] Watchdog DM - ENOMEM(out of memory) error
Simon Glass
- [U-Boot] buildman cause PC hang for long time
Simon Glass
- [U-Boot] [PATCH 1/4] dm: timer: Skip device that does not have a valid ofnode in pre_probe()
Simon Glass
- [U-Boot] [PATCH 2/4] dm: core: Call clk_set_defaults() during probe() only for a valid ofnode
Simon Glass
- [U-Boot] [PATCH 3/4] dm: core: Set correct "status" value for a node
Simon Glass
- [U-Boot] [PATCH 4/4] dm: Fix parameter description of dev_read_name()
Simon Glass
- [U-Boot] Please pull u-boot-dm (wandboard fix)
Simon Glass
- [U-Boot] [PATCH v2 00/37] binman: Add CBFS support
Simon Glass
- [U-Boot] [PATCH v2 01/37] x86: Add ifwitool for Intel Integrated Firmware Image
Simon Glass
- [U-Boot] [PATCH v2 02/37] cbfs: Add an enum and comment for the magic number
Simon Glass
- [U-Boot] [PATCH v2 03/37] cbfs: Rename checksum to attributes_offset
Simon Glass
- [U-Boot] [PATCH v2 04/37] tools: Drop duplicate raise_on_error argument
Simon Glass
- [U-Boot] [PATCH v2 05/37] binman: Fix comment in bsection.GetEntries()
Simon Glass
- [U-Boot] [PATCH v2 06/37] binman: Correct two typos in function names in ftest
Simon Glass
- [U-Boot] [PATCH v2 07/37] binman: Add coverage tools info for Python 3
Simon Glass
- [U-Boot] [PATCH v2 08/37] patman: Add a way to set the search path for tools
Simon Glass
- [U-Boot] [PATCH v2 09/37] binman: Add a --toolpath option to set the tool search path
Simon Glass
- [U-Boot] [PATCH v2 10/37] binman: Add missing comments to bsection
Simon Glass
- [U-Boot] [PATCH v2 11/37] binman: Add missing comments toentry
Simon Glass
- [U-Boot] [PATCH v2 12/37] binman: Tidy up help for --indir
Simon Glass
- [U-Boot] [PATCH v2 13/37] binman: Use a better error for missing Intel descriptor
Simon Glass
- [U-Boot] [PATCH v2 14/37] binman: Detect skipped tests
Simon Glass
- [U-Boot] [PATCH v2 15/37] binman: Add a function to create a sample ELF file
Simon Glass
- [U-Boot] [PATCH v2 16/37] binman: Add a function to decode an ELF file
Simon Glass
- [U-Boot] [PATCH v2 17/37] binman: Ensure that coverage has access to site packages
Simon Glass
- [U-Boot] [PATCH v2 18/37] binman: Assume Intel descriptor is at the start of the image
Simon Glass
- [U-Boot] [PATCH v2 19/37] binman: Don't assume there is an ME region
Simon Glass
- [U-Boot] [PATCH v2 20/37] binman: Update entry.SetOffsetSize to be optional
Simon Glass
- [U-Boot] [PATCH v2 21/37] binman: Allow text directly in the node
Simon Glass
- [U-Boot] [PATCH v2 22/37] patman: Add functions to compress and decompress data
Simon Glass
- [U-Boot] [PATCH v2 23/37] binman: Use the tools.Decompress method
Simon Glass
- [U-Boot] [PATCH v2 24/37] binman: Drop unnecessary debug handling
Simon Glass
- [U-Boot] [PATCH v2 25/37] binman: Use tools compression function for blob handling
Simon Glass
- [U-Boot] [PATCH v2 26/37] binman: Correct comment in u_boot_spl_elf
Simon Glass
- [U-Boot] [PATCH v2 27/37] binman: Support ELF files for TPL
Simon Glass
- [U-Boot] [PATCH v2 28/37] binman: Fix up the _DoTestFile() function -u argument
Simon Glass
- [U-Boot] [PATCH v2 29/37] binman: Allow verbosity control when running tests
Simon Glass
- [U-Boot] [PATCH v2 30/37] binman: Allow preserving test directories
Simon Glass
- [U-Boot] [PATCH v2 31/37] binman: Pass the toolpath to tests
Simon Glass
- [U-Boot] [PATCH v2 32/37] patman: Add a function to write ifwitool
Simon Glass
- [U-Boot] [PATCH v2 33/37] binman: Add a utility library for coreboot CBFS
Simon Glass
- [U-Boot] [PATCH v2 34/37] binman: Add support for CBFS entries
Simon Glass
- [U-Boot] [PATCH v2 35/37] binman: Add support for Intel IFWI entries
Simon Glass
- [U-Boot] [PATCH v2 36/37] binman: Pad empty areas of the CBFS with files
Simon Glass
- [U-Boot] [PATCH v2 37/37] binman: Add support for fixed-offset files in CBFS
Simon Glass
- [U-Boot] [PATCH v2 00/31] binman: Allow reading of images to list contents
Simon Glass
- [U-Boot] [PATCH v2 01/31] binman: Simplify the entry test
Simon Glass
- [U-Boot] [PATCH v2 02/31] binman: Update future features
Simon Glass
- [U-Boot] [PATCH v2 03/31] binman: Update help for new features
Simon Glass
- [U-Boot] [PATCH v2 04/31] binman: Add a convenience functions for real-DTB tests
Simon Glass
- [U-Boot] [PATCH v2 05/31] binman: Add an FDT map
Simon Glass
- [U-Boot] [PATCH v2 06/31] binman: Add an image header
Simon Glass
- [U-Boot] [PATCH v2 07/31] binman: Convert to use ArgumentParser
Simon Glass
- [U-Boot] [PATCH v2 08/31] binman: Move compression into the Entry base class
Simon Glass
- [U-Boot] [PATCH v2 09/31] binman: Drop an unused arg in Entry.Lookup()
Simon Glass
- [U-Boot] [PATCH v2 10/31] binman: Allow easy importing of entry modules
Simon Glass
- [U-Boot] [PATCH v2 11/31] binman: Fix up ProcessUpdateContents error and comments
Simon Glass
- [U-Boot] [PATCH v2 12/31] binman: Call ProcessUpdateContents() consistently
Simon Glass
- [U-Boot] [PATCH v2 13/31] binman: Add a return value to ProcessContentsUpdate()
Simon Glass
- [U-Boot] [PATCH v2 14/31] binman: Add a control for post-pack entry expansion
Simon Glass
- [U-Boot] [PATCH v2 15/31] binman: Allow entries to expand after packing
Simon Glass
- [U-Boot] [PATCH v2 16/31] binman: Allow device-tree entries to be compressed
Simon Glass
- [U-Boot] [PATCH v2 17/31] binman: Provide the actual data address for cbfs files
Simon Glass
- [U-Boot] [PATCH v2 18/31] binman: Use the cbfs memlen field only for uncompressed length
Simon Glass
- [U-Boot] [PATCH v2 19/31] binman: Support FDT update for CBFS
Simon Glass
- [U-Boot] [PATCH v2 20/31] binman: Detect bad CBFS file types
Simon Glass
- [U-Boot] [PATCH v2 21/31] binman: Allow listing the entries in an image
Simon Glass
- [U-Boot] [PATCH v2 22/31] binman: Support locating an FDT map
Simon Glass
- [U-Boot] [PATCH v2 23/31] binman: Support locating an image header
Simon Glass
- [U-Boot] [PATCH v2 24/31] binman: Support reading an image into an Image object
Simon Glass
- [U-Boot] [PATCH v2 25/31] binman: Convert Image to a subclass of Entry
Simon Glass
- [U-Boot] [PATCH v2 26/31] binman: Support listing an image
Simon Glass
- [U-Boot] [PATCH v2 27/31] binman: Allow for logging information to be displayed
Simon Glass
- [U-Boot] [PATCH v2 28/31] binman: Allow reading an entry from an image
Simon Glass
- [U-Boot] [PATCH v2 29/31] binman: Support reading from CBFS entries
Simon Glass
- [U-Boot] [PATCH v2 30/31] binman: Add an 'extract' command
Simon Glass
- [U-Boot] [PATCH v2 31/31] binman: Add a test for nested and aligned sections
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH] chromium: Update docs to clone vboot_reference directly
Simon Glass
- [U-Boot] [PATCH v2] x86: Avoid writing temporary asl files into the source tree
Simon Glass
- [U-Boot] [PATCH v2 01/21] patman: Update cros_subprocess to use bytes
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH v2 01/21] patman: Update cros_subprocess to use bytes
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH 1/2] dm: core: device: switch off power domain after device removal
Simon Glass
- [U-Boot] [PATCH] dm: uclass: fix comment copy/paste error
Simon Glass
- [U-Boot] [PATCH v4] gpio: add gpio-hog support
Simon Glass
- [U-Boot] ofnode -> udevice question
Simon Glass
- [U-Boot] SiFive clock driver changes for U-Boot 2019.10
Simon Glass
- [U-Boot] [PATCH v2 1/2] dm: core: device: switch off power domain after device removal
Simon Glass
- [U-Boot] 32-bit Tegra build failure in u-boot-dm
Simon Glass
- [U-Boot] [PATCH] Makefile: fix implementation of BINMAN_DEBUG
Simon Glass
- [U-Boot] 32-bit Tegra build failure in u-boot-dm
Simon Glass
- [U-Boot] [PATCH 00/53] binman: Support replacing entries in an existing image
Simon Glass
- [U-Boot] [PATCH 01/53] dtoc: Return a non-zero exit code when tests fail
Simon Glass
- [U-Boot] [PATCH 02/53] binman: Move image-processing code into a function
Simon Glass
- [U-Boot] [PATCH 03/53] binman: Move GetFdtSet() into blob_dtb
Simon Glass
- [U-Boot] [PATCH 04/53] binman: Use print() to print output
Simon Glass
- [U-Boot] [PATCH 05/53] binman: Move image/fdt code into PrepareImagesAndDtbs()
Simon Glass
- [U-Boot] [PATCH 06/53] binman: Convert GetFdtSet() to use a dict
Simon Glass
- [U-Boot] [PATCH 07/53] binman: Rename state.GetFdts()
Simon Glass
- [U-Boot] [PATCH 08/53] binman: Rename state.GetFdt()
Simon Glass
- [U-Boot] [PATCH 09/53] binman: Adjust GetFdt() to be keyed by etype
Simon Glass
- [U-Boot] [PATCH 10/53] binman: Adjust state.fdt_files to be keyed by entry type
Simon Glass
- [U-Boot] [PATCH 11/53] binman: Simplify state.fdt_subset
Simon Glass
- [U-Boot] [PATCH 12/53] binman: Drop state.fdt_set as this is not needed
Simon Glass
- [U-Boot] [PATCH 13/53] patman: Update tout to avoid open-coding the debug levels
Simon Glass
- [U-Boot] [PATCH 14/53] binman: Add a bit of logging in entries when packing
Simon Glass
- [U-Boot] [PATCH 15/53] binman: Show a helpful error when a DT property is missing
Simon Glass
- [U-Boot] [PATCH 16/53] dtoc: Update Fdt.FromData() to allow a name
Simon Glass
- [U-Boot] [PATCH 17/53] dtoc: Update Fdt.GetNode() to handle the root node
Simon Glass
- [U-Boot] [PATCH 18/53] binman: Store image fdtmap when loading from a file
Simon Glass
- [U-Boot] [PATCH 19/53] binman: Support loading entry data from a file
Simon Glass
- [U-Boot] [PATCH 20/53] binman: Allow state functions to fail to return data
Simon Glass
- [U-Boot] [PATCH 21/53] binman: Store the entry in output_fdt_files
Simon Glass
- [U-Boot] [PATCH 22/53] binman: Add an image name into the fdtmap
Simon Glass
- [U-Boot] [PATCH 23/53] binman: Adjust Entry to read the node in a separate call
Simon Glass
- [U-Boot] [PATCH 24/53] binman: Add a function to obtain the image for an Entry
Simon Glass
- [U-Boot] [PATCH 25/53] binman: Add a constant for common entry properties
Simon Glass
- [U-Boot] [PATCH 26/53] binman: Allow the fdtmap to remain unchanged
Simon Glass
- [U-Boot] [PATCH 27/53] binman: Tidy up _SetupDtb() to use its own temporary file
Simon Glass
- [U-Boot] [PATCH 28/53] binman: Support updating entries in an existing image
Simon Glass
- [U-Boot] [PATCH 29/53] binman: Add info to allow safely repacking an image later
Simon Glass
- [U-Boot] [PATCH 30/53] binman: Update documentation for image creation
Simon Glass
- [U-Boot] [PATCH 31/53] binman: Write the original input fdtmap to a file
Simon Glass
- [U-Boot] [PATCH 32/53] binman: Move Image.BuildImage() into a single function
Simon Glass
- [U-Boot] [PATCH 33/53] binman: Add more tests for image header position
Simon Glass
- [U-Boot] [PATCH 34/53] binman: Allow updating entries that change size
Simon Glass
- [U-Boot] [PATCH 35/53] binman: Update the _testing entry to support shrinkage
Simon Glass
- [U-Boot] [PATCH 36/53] binman: Support shrinking a entry after packing
Simon Glass
- [U-Boot] [PATCH 37/53] libfdt: Copy the struct region in fdt_resize()
Simon Glass
- [U-Boot] [PATCH 38/53] binman: Adjust fmap to ignore CBFS files
Simon Glass
- [U-Boot] [PATCH 39/53] binman: Place Intel descriptor at image start
Simon Glass
- [U-Boot] [PATCH 40/53] binman: Add a few more features to the wishlist
Simon Glass
- [U-Boot] [PATCH 41/53] binman: Add a prefix before CBFS hex offsets
Simon Glass
- [U-Boot] [PATCH 42/53] binman: Update Entry.ReadEntry() to work through classes
Simon Glass
- [U-Boot] [PATCH 43/53] binman: Update Entry.WriteData() to handle special sections
Simon Glass
- [U-Boot] [PATCH 44/53] binman: Support replacing data in a cbfs
Simon Glass
- [U-Boot] [PATCH 45/53] patman: Reset the output directory when it is removed
Simon Glass
- [U-Boot] [PATCH 46/53] binman: Update state when replacing device-tree entries
Simon Glass
- [U-Boot] [PATCH 47/53] binman: Add a test function to clean up the output dir
Simon Glass
- [U-Boot] [PATCH 48/53] binman: Clean up all output directories in tests
Simon Glass
- [U-Boot] [PATCH 49/53] binman: Move control.WriteEntry further down the file
Simon Glass
- [U-Boot] [PATCH 50/53] binman: Update control.WriteEntry() to support writing the map
Simon Glass
- [U-Boot] [PATCH 51/53] binman: Split control.WriteEntryToImage() into separate functions
Simon Glass
- [U-Boot] [PATCH 52/53] binman: Correct the error message for invalid path
Simon Glass
- [U-Boot] [PATCH 53/53] binman: Add command-line support for replacing entries
Simon Glass
- [U-Boot] [PATCH v2 00/18] autoboot: Tidy up autoboot code
Simon Glass
- [U-Boot] [PATCH v2 01/18] main: Use conditional run_preboot_environment_command()
Simon Glass
- [U-Boot] [PATCH v2 02/18] Convert CONFIG_SHOW_BOOT_PROGRESS to Kconfig
Simon Glass
- [U-Boot] [PATCH v2 03/18] Add CONFIG_USE_PREBOOT to boards that use CONFIG_PREBOOT
Simon Glass
- [U-Boot] [PATCH v2 04/18] Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig
Simon Glass
- [U-Boot] [PATCH v2 05/18] autoboot: Use CONFIG_AUTOBOOT_STOP_STR_SHA256 indirectly
Simon Glass
- [U-Boot] [PATCH v2 06/18] autoboot: Drop #ifdef for CONFIG_AUTOBOOT_ENCRYPTION
Simon Glass
- [U-Boot] [PATCH v2 07/18] autoboot: Improve docs for CONFIG_AUTOBOOT_ENCRYPTION
Simon Glass
- [U-Boot] [PATCH v2 08/18] autoboot: Use if() for CONFIG_SILENT_CONSOLE
Simon Glass
- [U-Boot] [PATCH v2 09/18] autoboot: Drop #ifdef CONFIG_AUTOBOOT_KEYED
Simon Glass
- [U-Boot] [PATCH v2 10/18] autoboot: Drop unused CONFIG_MENUPROMPT
Simon Glass
- [U-Boot] [PATCH v2 11/18] autoboot: Rename CONFIG_MENUKEY to CONFIG_AUTOBOOT_MENUKEY
Simon Glass
- [U-Boot] [PATCH v2 12/18] snow: Define CONFIG_AUTOBOOT_MENUKEY
Simon Glass
- [U-Boot] [PATCH v2 13/18] autoboot: Tidy up use of menukey
Simon Glass
- [U-Boot] [PATCH v2 14/18] autoboot: Rename CONFIG_MENU_SHOW to include AUTOBOOT
Simon Glass
- [U-Boot] [PATCH v2 15/18] Convert CONFIG_AUTOBOOT_MENU_SHOW to Kconfig
Simon Glass
- [U-Boot] [PATCH v2 16/18] autoboot: Add comments for menu_show()
Simon Glass
- [U-Boot] [PATCH v2 17/18] autoboot: Move a few more options from #ifdef to if()
Simon Glass
- [U-Boot] [PATCH v2 18/18] autoboot: Adjust the implementation in autoboot_command()
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] Move setup_led() in SPL to U-Boot proper?
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] Please pull u-boot-dm (take 2)
Simon Glass
- [U-Boot] [PATCH 00/18] autoboot: Tidy up autoboot code
Simon Glass
- [U-Boot] python3 support for pylibfdt
Simon Glass
- [U-Boot] [PATCH] core: ofnode: do not assert if node not valid in ofnode_get_name()
Simon Glass
- [U-Boot] [PATCH] gitlab-ci: Add pyelftools to the binman testsuite section
Simon Glass
- [U-Boot] [PATCH] gitlab-ci: Update Docker image to xenial-20190720-24Jul2019 tag
Simon Glass
- [U-Boot] Please pull u-boot-dm (take 2)
Simon Glass
- [U-Boot] Please pull u-boot-dm (take 3)
Simon Glass
- [U-Boot] how to update libfdt
Simon Glass
- [U-Boot] [PATCH 00/39] env: common: Remove environment definitions from common.h
Simon Glass
- [U-Boot] [PATCH 01/39] common: Move gzip functions into a new gzip header
Simon Glass
- [U-Boot] [PATCH 02/39] common: Drop the dpram_... functions
Simon Glass
- [U-Boot] [PATCH 03/39] common: Move lcd_setmem() to lcd.h
Simon Glass
- [U-Boot] [PATCH 04/39] common: Remove video_setmem()
Simon Glass
- [U-Boot] [PATCH 05/39] env: Create a new file for environment functions
Simon Glass
- [U-Boot] [PATCH 06/39] env: Move get_env_id() to env.h
Simon Glass
- [U-Boot] [PATCH 07/39] env: Move env_get_f() to env.h
Simon Glass
- [U-Boot] [PATCH 08/39] env: Move env_init() to env.h
Simon Glass
- [U-Boot] [PATCH 09/39] env: Move env_relocate() to env.h
Simon Glass
- [U-Boot] [PATCH 10/39] env: Move envmatch() to env.h
Simon Glass
- [U-Boot] [PATCH 11/39] env: Move env_set_hex() to env.h
Simon Glass
- [U-Boot] [PATCH 12/39] env: Move env_set_ulong() to env.h
Simon Glass
- [U-Boot] [PATCH 13/39] env: Move env_get_ulong() to env.h
Simon Glass
- [U-Boot] [PATCH 14/39] env: Move env_get_yesno() to env.h
Simon Glass
- [U-Boot] [PATCH 15/39] env: Move env_get_hex() to env.h
Simon Glass
- [U-Boot] [PATCH 16/39] env: Move env_set() to env.h
Simon Glass
- [U-Boot] [PATCH 17/39] env: Move env_get() to env.h
Simon Glass
- [U-Boot] [PATCH 18/39] env: Move eth_env_get/set_enetaddr() to env.h
Simon Glass
- [U-Boot] [PATCH 19/39] env: Move uncommon functions to env.h
Simon Glass
- [U-Boot] [PATCH 20/39] env: Move set_default_vars to env.h
Simon Glass
- [U-Boot] [PATCH 21/39] env: Move env_load/save functions to env.h
Simon Glass
- [U-Boot] [PATCH 22/39] env: Move env import/export functions to env.h
Simon Glass
- [U-Boot] [PATCH 23/39] env: Drop env_crc_update()
Simon Glass
- [U-Boot] [PATCH 24/39] env: Move get/set_default_env() to env.h
Simon Glass
- [U-Boot] [PATCH 25/39] env: Move env_get_char() to env.h
Simon Glass
- [U-Boot] [PATCH 26/39] env: Move env_reloc() to env.h
Simon Glass
- [U-Boot] [PATCH 27/39] env: Rename environment to embedded_environment
Simon Glass
- [U-Boot] [PATCH 28/39] env: Move env_valid to env.h
Simon Glass
- [U-Boot] [PATCH 29/39] env: Move callback definitions to env.h
Simon Glass
- [U-Boot] [PATCH 30/39] env: Drop the ENTRY typdef
Simon Glass
- [U-Boot] [PATCH 31/39] env: Drop _ENTRY
Simon Glass
- [U-Boot] [PATCH 32/39] env: Rename the redundancy flags
Simon Glass
- [U-Boot] [PATCH 33/39] env: Drop the ACTION typedef
Simon Glass
- [U-Boot] [PATCH 34/39] env: Drop the double underscores in search.h
Simon Glass
- [U-Boot] [PATCH 35/39] env: Move TOTAL_MALLOC_LEN to environment.h
Simon Glass
- [U-Boot] [PATCH 36/39] env: Drop environment.h header file where not needed
Simon Glass
- [U-Boot] [PATCH 37/39] env: Rename environment.h to env_internal.h
Simon Glass
- [U-Boot] [PATCH 38/39] Drop PCMCIA
Simon Glass
- [U-Boot] [PATCH 39/39] common: Add a note about the effort to reduce common.h
Simon Glass
- [U-Boot] buildman rockchip
Simon Glass
- [U-Boot] buildman rockchip
Simon Glass
- [U-Boot] [PATCH v3] x86: Avoid writing temporary asl files into the source tree
Simon Glass
- [U-Boot] buildman rockchip
Simon Glass
- [U-Boot] [RFC] tools/buildman/toolchain.py: check signatures
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] x86 FSP 2
Simon Glass
- [U-Boot] [PATCH v2 1/2] dm: core: device: switch off power domain after device removal
Simon Glass
- [U-Boot] [PATCH] board_r: re-order the board_early_init_r()
Simon Glass
- [U-Boot] [PATCH 31/39] env: Drop _ENTRY
Simon Glass
- [U-Boot] [PATCH 32/39] env: Rename the redundancy flags
Simon Glass
- [U-Boot] [PATCH 31/39] env: Drop _ENTRY
Simon Glass
- [U-Boot] [PATCH 0/4] davinci: omapl138-lcdk: enable CONFIG_SPL_DM
Bartosz Golaszewski
- [U-Boot] [PATCH 0/4] nand: davinci: enable driver model for NAND
Bartosz Golaszewski
- [U-Boot] [PATCH 0/4] davinci: fix build warnings
Bartosz Golaszewski
- [U-Boot] [PATCH 00/14] ARM: davinci: driver-model improvements
Bartosz Golaszewski
- [U-Boot] [PATCH 01/14] net: davinci_emac: convert to using the driver model
Bartosz Golaszewski
- [U-Boot] [PATCH 02/14] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
Bartosz Golaszewski
- [U-Boot] [PATCH 03/14] sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs
Bartosz Golaszewski
- [U-Boot] [PATCH 04/14] i2c: remove i2c driver-model compatibility layer
Bartosz Golaszewski
- [U-Boot] [PATCH 05/14] omapl138_lcdk_defconfig: don't build support for SPI
Bartosz Golaszewski
- [U-Boot] [PATCH 06/14] nand: davinci: make davinci_nand_init() static
Bartosz Golaszewski
- [U-Boot] [PATCH 07/14] nand: davinci: add support for driver model
Bartosz Golaszewski
- [U-Boot] [PATCH 08/14] davinci: omapl138-lcdk: enable driver model for NAND
Bartosz Golaszewski
- [U-Boot] [PATCH 09/14] davinci: da850-evm: enable driver model for NAND
Bartosz Golaszewski
- [U-Boot] [PATCH 10/14] davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE
Bartosz Golaszewski
- [U-Boot] [PATCH 11/14] davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF
Bartosz Golaszewski
- [U-Boot] [PATCH 12/14] davinci: omapl138-lcdk: remove unneeded includes
Bartosz Golaszewski
- [U-Boot] [PATCH 13/14] davinci: omapl138-lcdk: enable driver-model in SPL
Bartosz Golaszewski
- [U-Boot] [PATCH 14/14] configs: omapl138_lcdk: enable NAND self-init in SPL
Bartosz Golaszewski
- [U-Boot] [PATCH 13/14] davinci: omapl138-lcdk: enable driver-model in SPL
Bartosz Golaszewski
- [U-Boot] [PATCH 00/14] ARM: davinci: driver-model improvements
Bartosz Golaszewski
- [U-Boot] [PATCH v2] net: davinci_emac: convert to using the driver model
Bartosz Golaszewski
- [U-Boot] [PATCH v2 00/14] ARM: davinci: driver-model improvements
Bartosz Golaszewski
- [U-Boot] [PATCH v2 01/14] net: davinci_emac: convert to using the driver model
Bartosz Golaszewski
- [U-Boot] [PATCH v2 02/14] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
Bartosz Golaszewski
- [U-Boot] [PATCH v2 03/14] sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs
Bartosz Golaszewski
- [U-Boot] [PATCH v2 04/14] i2c: remove i2c driver-model compatibility layer
Bartosz Golaszewski
- [U-Boot] [PATCH v2 05/14] omapl138_lcdk_defconfig: don't build support for SPI
Bartosz Golaszewski
- [U-Boot] [PATCH v2 06/14] nand: davinci: make davinci_nand_init() static
Bartosz Golaszewski
- [U-Boot] [PATCH v2 07/14] nand: davinci: add support for driver model
Bartosz Golaszewski
- [U-Boot] [PATCH v2 08/14] davinci: omapl138-lcdk: enable driver model for NAND
Bartosz Golaszewski
- [U-Boot] [PATCH v2 09/14] davinci: da850-evm: enable driver model for NAND
Bartosz Golaszewski
- [U-Boot] [PATCH v2 10/14] davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE
Bartosz Golaszewski
- [U-Boot] [PATCH v2 11/14] davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF
Bartosz Golaszewski
- [U-Boot] [PATCH v2 12/14] davinci: omapl138-lcdk: remove unneeded includes
Bartosz Golaszewski
- [U-Boot] [PATCH v2 13/14] davinci: omapl138-lcdk: enable driver-model in SPL
Bartosz Golaszewski
- [U-Boot] [PATCH v2 14/14] configs: omapl138_lcdk: enable NAND self-init in SPL
Bartosz Golaszewski
- [U-Boot] [PATCH v2 00/14] ARM: davinci: driver-model improvements
Bartosz Golaszewski
- [U-Boot] [PATCH v2 00/14] ARM: davinci: driver-model improvements
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 00/13] ARM: davinci: driver-model improvements
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 01/13] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 02/13] sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 03/13] i2c: remove i2c driver-model compatibility layer
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 04/13] omapl138_lcdk_defconfig: don't build support for SPI
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 05/13] nand: davinci: make davinci_nand_init() static
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 06/13] nand: davinci: add support for driver model
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 07/13] davinci: omapl138-lcdk: enable driver model for NAND
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 08/13] davinci: da850-evm: enable driver model for NAND
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 09/13] davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 10/13] davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 11/13] davinci: omapl138-lcdk: remove unneeded includes
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL
Bartosz Golaszewski
- [U-Boot] [RESEND PATCH v2 13/13] configs: omapl138_lcdk: enable NAND self-init in SPL
Bartosz Golaszewski
- [U-Boot] [PATCH v7 0/2] add command env erase
Simon Goldschmidt
- [U-Boot] [PATCH v7 1/2] env: register erase command
Simon Goldschmidt
- [U-Boot] [PATCH v7 2/2] env: mmc: add erase-function
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 00/15] Add Intel Agilex SoC support
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 01/15] arm: socfpga: agilex: Add base address for Intel Agilex SoC
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 02/15] arm: socfpga: Move firewall code to firewall file
Simon Goldschmidt
- [U-Boot] [PATCH v7 0/2] add command env erase
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 03/15] arm: socfpga: Move Stratix10 and Agilex reset manager common code
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 04/15] arm: socfpga: agilex: Add reset manager support
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 05/15] arm: socfpga: Move Stratix10 and Agilex system manager common code
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 06/15] arm: socfpga: agilex: Add system manager support
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 07/15] clk: agilex: Add clock driver for Agilex.
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 08/15] arm: socfpga: agilex: Add clock manager support
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 09/15] arm: socfpga: agilex: Add CCU support for Agilex
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 10/15] ddr: altera: Restructure Stratix 10 SDRAM driver
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 11/15] ddr: altera: agilex: Add SDRAM driver for Agilex
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 12/15] board: intel: agilex: Add socdk board support for Intel Agilex SoC
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 13/15] arm: socfpga: agilex: Add SPL for Agilex SoC
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 14/15] arm: dts: agilex: Add base dtsi and devkit dts
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 15/15] arm: socfpga: agilex: Enable Agilex SoC build
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 04/15] arm: socfpga: agilex: Add reset manager support
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 00/15] Add Intel Agilex SoC support
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback
Simon Goldschmidt
- [U-Boot] [PATCH] cmd: reset: add parameters to specify reboot_mode
Simon Goldschmidt
- [U-Boot] [PATCH v2] arm: socfpga: do not reboot via SRAM
Simon Goldschmidt
- [U-Boot] [PATCH v3 2/4] sysreset: socfpga: gen5: add sysreset driver
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: fix 3 boards missing env var "socfpga_legacy_reset_compat"
Simon Goldschmidt
- [U-Boot] [PATCH v2] arm: socfpga: fix 3 boards missing env var "socfpga_legacy_reset_compat"
Simon Goldschmidt
- [U-Boot] [PATCH 0/2] arm: socfpga: gen5 SPL bss cleanup
Simon Goldschmidt
- [U-Boot] [PATCH 1/2] dm: ddr: socfpga: fix gen5 ddr driver to not use bss
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] arm: socfpga: gen5: don't zero bss in board_init_f()
Simon Goldschmidt
- [U-Boot] [PATCH v2] arm: socfpga: do not reboot via SRAM
Simon Goldschmidt
- [U-Boot] [PATCH v3 2/4] sysreset: socfpga: gen5: add sysreset driver
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] arm: socfpga: gen5: don't zero bss in board_init_f()
Simon Goldschmidt
- [U-Boot] [PATCH v2] arm: socfpga: do not reboot via SRAM
Simon Goldschmidt
- [U-Boot] [PATCH v5 0/3] fit: Image node compression
Simon Goldschmidt
- [U-Boot] [PATCH v5 1/3] common: Move bootm_decomp_image() to image.c (as image_decomp())
Simon Goldschmidt
- [U-Boot] [PATCH v5 2/3] fit: Support compression for non-kernel components (e.g. FDT)
Simon Goldschmidt
- [U-Boot] [PATCH v5 3/3] fit: Support compat string property in configuration node
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 03/15] arm: socfpga: Move Stratix10 and Agilex reset manager common code
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 08/15] arm: socfpga: agilex: Add clock manager support
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] arm: socfpga: gen5: don't zero bss in board_init_f()
Simon Goldschmidt
- [U-Boot] [PATCH v2] arm: socfpga: do not reboot via SRAM
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 07/15] clk: agilex: Add clock driver for Agilex.
Simon Goldschmidt
- [U-Boot] [RESEND PATCH v2 06/15] arm: socfpga: agilex: Add system manager support
Simon Goldschmidt
- [U-Boot] [PATCH v2] arm: socfpga: gen5: don't zero bss in board_init_f()
Simon Goldschmidt
- [U-Boot] [PATCH v5 2/3] fit: Support compression for non-kernel components (e.g. FDT)
Simon Goldschmidt
- [U-Boot] [PATCH v3 2/4] sysreset: socfpga: gen5: add sysreset driver
Simon Goldschmidt
- [U-Boot] [PATCH] cmd: mdio: prevent data abort when no mdio bus is found
Simon Goldschmidt
- [U-Boot] [PATCH] net: designware: remove mdio bus on probe failure
Simon Goldschmidt
- [U-Boot] [PATCH v3] spl: kconfig: separate sysreset and firmware drivers from misc
Simon Goldschmidt
- [U-Boot] [PATCH v4 1/4] arm: socfpga: rst: add register definition for cold reset
Simon Goldschmidt
- [U-Boot] [PATCH v4 2/4] sysreset: socfpga: gen5: add sysreset driver
Simon Goldschmidt
- [U-Boot] [PATCH v4 3/4] sysreset: socfpga: stratix10: add sysreset driver
Simon Goldschmidt
- [U-Boot] [PATCH v4 4/4] sysreset: add support for socfpga sysreset
Simon Goldschmidt
- [U-Boot] [PATCH] net: designware: use 'phy_connect' instead of open coded
Simon Goldschmidt
- [U-Boot] [PATCH v3] spl: kconfig: separate sysreset and firmware drivers from misc
Simon Goldschmidt
- [U-Boot] [PATCH v4] spl: kconfig: separate sysreset and firmware drivers from misc
Simon Goldschmidt
- [U-Boot] [PATCH] spl: implement stack usage check
Simon Goldschmidt
- [U-Boot] [PATCH] spl: implement stack usage check
Simon Goldschmidt
- [U-Boot] [PATCH v2 05/12] armV7R: K3: am654: Allow using SPL BSS pre-relocation
Simon Goldschmidt
- [U-Boot] Remote code execution vulnerabilities in U-Boot's NFS and other IP parsing code
Simon Goldschmidt
- [U-Boot] [PATCH v4 1/4] arm: socfpga: rst: add register definition for cold reset
Simon Goldschmidt
- [U-Boot] [PATCH v4 1/4] arm: socfpga: rst: add register definition for cold reset
Simon Goldschmidt
- [U-Boot] [PATCH v4 1/4] arm: socfpga: rst: add register definition for cold reset
Simon Goldschmidt
- [U-Boot] [PATCH 0/6] arm: socfpga: gen5: DM improvements
Simon Goldschmidt
- [U-Boot] [PATCH 1/6] ddr: socfpga: gen5: constify altera_gen5_sdram_ops
Simon Goldschmidt
- [U-Boot] [PATCH 2/6] arm: socfpga: gen5: increase SPL_SYS_MALLOC_F_LEN
Simon Goldschmidt
- [U-Boot] [PATCH 3/6] timer: dw-apb: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH 4/6] arm: socfpga: gen5: move initial reset handling to reset driver
Simon Goldschmidt
- [U-Boot] [PATCH 5/6] arm: socfpga: gen5: add readonly clk driver
Simon Goldschmidt
- [U-Boot] [PATCH 6/6] arm: socfpga: gen5: use DM_TIMER for systick
Simon Goldschmidt
- [U-Boot] [PATCH 0/6] arm: socfpga: gen5: DM improvements
Simon Goldschmidt
- [U-Boot] [PATCH 4/6] arm: socfpga: gen5: move initial reset handling to reset driver
Simon Goldschmidt
- [U-Boot] [PATCH 3/6] timer: dw-apb: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH 5/6] arm: socfpga: gen5: add readonly clk driver
Simon Goldschmidt
- [U-Boot] [PATCH 5/6] arm: socfpga: gen5: add readonly clk driver
Simon Goldschmidt
- [U-Boot] [PATCH] board_r: re-order the board_early_init_r()
Simon Goldschmidt
- [U-Boot] Remote code execution vulnerabilities in U-Boot's NFS and other IP parsing code
Simon Goldschmidt
- [U-Boot] [PATCH 3/6] timer: dw-apb: add reset handling
Simon Goldschmidt
- [U-Boot] Please pull u-boot-dm (take 2)
Simon Goldschmidt
- [U-Boot] [PATCH v6 1/3] common: Move bootm_decomp_image() to image.c (as image_decomp())
Simon Goldschmidt
- [U-Boot] [PATCH v6 2/3] fit: Support compression for non-kernel components (e.g. FDT)
Simon Goldschmidt
- [U-Boot] [PATCH v2 05/12] armV7R: K3: am654: Allow using SPL BSS pre-relocation
Simon Goldschmidt
- [U-Boot] Please pull u-boot-dm (take 2)
Simon Goldschmidt
- [U-Boot] [PATCH v2 05/12] armV7R: K3: am654: Allow using SPL BSS pre-relocation
Simon Goldschmidt
- [U-Boot] [PATCH 3/6] timer: dw-apb: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH] cmd: reset: add parameters to specify reboot_mode
Simon Goldschmidt
- [U-Boot] Regression after "distro: not taint environment variables if possible"
Nuno Gonçalves
- [U-Boot] efi_loader: test_efi_grub_net()
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_selftest: description of CMD_BOOTEFI_SELFTEST
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: correct signature of ConvertPointer()
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: bump UEFI specification number to 2.8
Alexander Graf
- [U-Boot] efi_loader: test_efi_grub_net()
Alexander Graf
- [U-Boot] U-Boot/EBBR plugfest at ELC-EU?
Alexander Graf
- [U-Boot] Boot Linux using EFI environment from u-boot
Alexander Graf
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Alexander Graf
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Alexander Graf
- [U-Boot] [RFC 1/1] efi_loader: usage of cleanup_before_linux()
Alexander Graf
- [U-Boot] [PATCH v2 2/8] ARM: bcm283x: Add BCM283x_BASE define
Alexander Graf
- [U-Boot] [PATCH v2 2/8] ARM: bcm283x: Add BCM283x_BASE define
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: re-enable GRUB workaround on 32bit ARM
Alexander Graf
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Jonathan Gray
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Jonathan Gray
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Jonathan Gray
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Jonathan Gray
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Pablo Sebastián Greco
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Pablo Sebastián Greco
- [U-Boot] [PATCH] poplar: increase SYS_MALLOC_F_LEN for DM_FLAG_PRE_RELOC support
Shawn Guo
- [U-Boot] [PATCH 1/2] ARM: dts: import meerkat96 board support
Shawn Guo
- [U-Boot] [PATCH 2/2] Add i.MX7D based Meerkat96 board support
Shawn Guo
- [U-Boot] [PATCH 2/2] Add i.MX7D based Meerkat96 board support
Shawn Guo
- [U-Boot] [PATCH 2/2] Add i.MX7D based Meerkat96 board support
Shawn Guo
- [U-Boot] [PATCH v2] video: backlight: fix pwm invertation
Anatolij Gustschin
- [U-Boot] [PATCH v2] video: backlight: fix pwm invertation
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video
Anatolij Gustschin
- [U-Boot] [PATCH 0/6] Extend mv88e61xx driver to support 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH 1/6] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Anatolij Gustschin
- [U-Boot] [PATCH 2/6] net: phy: mv88e61xx: add CPU port parameter init for 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH 3/6] net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071
Anatolij Gustschin
- [U-Boot] [PATCH 4/6] net: phy: mv88E61xx: add config option for mv88E6071 support
Anatolij Gustschin
- [U-Boot] [PATCH 5/6] net: phy: mv88e61xx: register phy_driver struct for 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH 6/6] net: phy: fix switch vendor name
Anatolij Gustschin
- [U-Boot] [PATCH 1/6] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Anatolij Gustschin
- [U-Boot] [PATCH 0/6] Extend mv88e61xx driver to support 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH v2 0/6] Extend mv88e61xx driver to support 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH v2 1/6] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Anatolij Gustschin
- [U-Boot] [PATCH v2 2/6] net: phy: mv88e61xx: add CPU port parameter init for 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH v2 3/6] net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071
Anatolij Gustschin
- [U-Boot] [PATCH v2 4/6] net: phy: mv88E61xx: add config option for mv88E6071 support
Anatolij Gustschin
- [U-Boot] [PATCH v2 5/6] net: phy: mv88e61xx: register phy_driver struct for 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH v2 6/6] net: phy: fix switch vendor name
Anatolij Gustschin
- [U-Boot] [PATCH] power-domain.h: Fix typo
Anatolij Gustschin
- [U-Boot] [PATCH v2 0/6] Extend mv88e61xx driver to support 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH 1/2] dm: core: device: switch off power domain after device removal
Anatolij Gustschin
- [U-Boot] [PATCH 2/2] serial: lpuart: request dm device removal when booting OS
Anatolij Gustschin
- [U-Boot] [PATCH 1/2] board: siemens: adapt factoryset reading for DM_I2C enabled boards
Anatolij Gustschin
- [U-Boot] [PATCH 2/2] board: siemens: extend factoryset reading for giedi and deneb boards
Anatolij Gustschin
- [U-Boot] [PATCH 1/2] dm: core: device: switch off power domain after device removal
Anatolij Gustschin
- [U-Boot] [PATCH] dm: device: make power domain calls optional
Anatolij Gustschin
- [U-Boot] [PATCH v2 1/2] dm: core: device: switch off power domain after device removal
Anatolij Gustschin
- [U-Boot] [PATCH v2 2/2] serial: lpuart: request dm device removal when booting OS
Anatolij Gustschin
- [U-Boot] [PATCH v2 1/4] video: fsl_dcu_fb: refactor init functions
Anatolij Gustschin
- [U-Boot] [PATCH v2 1/6] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Anatolij Gustschin
- [U-Boot] [PATCH v2 2/6] net: phy: mv88e61xx: add CPU port parameter init for 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH v2 5/6] net: phy: mv88e61xx: register phy_driver struct for 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH v2 4/6] net: phy: mv88E61xx: add config option for mv88E6071 support
Anatolij Gustschin
- [U-Boot] [PATCH v2 1/6] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Anatolij Gustschin
- [U-Boot] [PATCH 1/1] video: dw_hdmi: Add support for ddc-i2c-bus property
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video
Anatolij Gustschin
- [U-Boot] [PATCH v2 1/4] video: fsl_dcu_fb: refactor init functions
Anatolij Gustschin
- [U-Boot] [RFC 0/4] Convert fsl_dcu_fb to DM_VIDEO
Anatolij Gustschin
- [U-Boot] [PATCH] video: arm: rpi: Bail out early if querying video information fails
Anatolij Gustschin
- [U-Boot] [PATCH 0/6] Enabled DM_VIDEO for Colibri iMX7 NAND/iMX6ULL
Anatolij Gustschin
- [U-Boot] [PATCH 0/6] Enabled DM_VIDEO for Colibri iMX7 NAND/iMX6ULL
Anatolij Gustschin
- [U-Boot] [PATCH v2 1/1] video: dw_hdmi: Add support for ddc-i2c-bus property
Anatolij Gustschin
- [U-Boot] [PATCH 0/3] video: add support for EDID timings validation
Anatolij Gustschin
- [U-Boot] [PATCH] video: arm: rpi: Avoid crash without HDMI monitor connected
Anatolij Gustschin
- [U-Boot] [PATCH] edid: fix edid_get_timing_validate() mode_valid lookup
Anatolij Gustschin
- [U-Boot] [PATCH v3 0/6] Extend mv88e61xx driver to support 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH v3 1/6] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Anatolij Gustschin
- [U-Boot] [PATCH v3 2/6] net: phy: mv88e61xx: add CPU port parameter init for 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH v3 3/6] net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071
Anatolij Gustschin
- [U-Boot] [PATCH v3 4/6] net: phy: mv88E61xx: add config option for mv88E6071 support
Anatolij Gustschin
- [U-Boot] [PATCH v3 5/6] net: phy: mv88e61xx: register phy_driver struct for 88E6071
Anatolij Gustschin
- [U-Boot] [PATCH v3 6/6] net: phy: fix switch vendor name
Anatolij Gustschin
- [U-Boot] [PATCH] arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio command
Anatolij Gustschin
- [U-Boot] [PATCH] i2c: imx_lpi2c: add ipg clk
Anatolij Gustschin
- [U-Boot] [PATCH] i2c: imx_lpi2c: add ipg clk
Anatolij Gustschin
- [U-Boot] [PATCH] bmp_logo: support CONFIG_DM_VIDEO
Anatolij Gustschin
- [U-Boot] [PATCH] video, simple_panel: add lg,lb070wv8 display
Anatolij Gustschin
- [U-Boot] [PATCH v1 0/5] imx6, display: enhancements for upcoming aristainetos DM support
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video
Anatolij Gustschin
- [U-Boot] [PATCH v2 2/2] serial: lpuart: request dm device removal when booting OS
Anatolij Gustschin
- [U-Boot] [PATCH v2 1/2] dm: core: device: switch off power domain after device removal
Anatolij Gustschin
- [U-Boot] [PATCH v2 1/2] dm: core: device: switch off power domain after device removal
Anatolij Gustschin
- [U-Boot] [PATCH v2 1/2] dm: core: device: switch off power domain after device removal
Anatolij Gustschin
- [U-Boot] [PATCH v3] dm: core: device: switch off power domain after device removal
Anatolij Gustschin
- [U-Boot] [PATCH v3 1/7] armv8: lx2160a: The lx2160a platform supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v3 2/7] configs: lx2160ardb: enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [PATCH v3 3/7] drivers: i2c: mxc: Solve the compiler error when using i2c dm mode
Chuanhua Han
- [U-Boot] [PATCH v3 4/7] gpio: do not include <asm/arch/gpio.h> on ARCH_LX2160A
Chuanhua Han
- [U-Boot] [PATCH v3 5/7] armv8: dts: fsl-lx2160a: add i2c controller and gpio DT nodes
Chuanhua Han
- [U-Boot] [PATCH v3 6/7] armv8: lx2160ardb: Add pcf2127 node
Chuanhua Han
- [U-Boot] [PATCH v3 7/7] armv8: lx2160ardb : Add the "u-boot, dm-pre-reloc" property for i2c0 node
Chuanhua Han
- [U-Boot] [PATCH 1/2] configs: lx2160aqds: enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [PATCH 2/2] armv8: lx2160aqds : Add pcf2127 node
Chuanhua Han
- [U-Boot] [PATCH v2 1/2] configs: lx2160aqds: enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [PATCH v2 2/2] armv8: lx2160aqds : Add pcf2127 node
Chuanhua Han
- [U-Boot] [PATCH v3 1/4] armv8: ls1028a: The ls1028a platform supports the I2C driver model
Chuanhua Han
- [U-Boot] [PATCH v3 2/4] gpio: do not include <asm/arch/gpio.h> on ARCH_LS1028A
Chuanhua Han
- [U-Boot] [PATCH v3 3/4] configs: ls1028a: enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [PATCH v3 4/4] armv8: dts: ls1028ardb: Add slave nodes under the i2c0 controller
Chuanhua Han
- [U-Boot] [PATCH v2 1/5] armv8: ls1088a: The ls1088a platform supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v2 2/5] gpio: do not include <asm/arch/gpio.h> on ARCH_LS1088A
Chuanhua Han
- [U-Boot] [PATCH v2 3/5] configs: ls1088a: enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [PATCH v2 4/5] armv8: dts: fsl-ls1088a: add I2C node support
Chuanhua Han
- [U-Boot] [PATCH v2 5/5] armv8: dts: ls1088ardb: Add slave nodes under the i2c0 controller
Chuanhua Han
- [U-Boot] [PATCH v2 1/5] armv8: ls2088a: The ls2088a platform supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v2 2/5] gpio: do not include <asm/arch/gpio.h> on ARCH_LS2080A
Chuanhua Han
- [U-Boot] [PATCH v2 3/5] configs: ls2088a: enable DM support for rtc
Chuanhua Han
- [U-Boot] [PATCH v2 4/5] armv8: dts: fsl-ls2088a: add i2c node support
Chuanhua Han
- [U-Boot] [PATCH v2 5/5] armv8: dts: ls2088ardb: Add slave nodes under the i2c0 controller
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH 1/2] dm: i2c: Add a flag that need generate stop bit
Chuanhua Han
- [U-Boot] [PATCH v5] rtc: pcf2127: Fixed bug with rtc settings and getting error time
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH v4] rtc: Add DM support to ds3231
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH v5] rtc: pcf2127: Fixed bug with rtc settings and getting error time
Chuanhua Han
- [U-Boot] [PATCH 1/4] armv8: ls1028aqds: Remove the definition of CONFIG_SYS_I2C_EARLY_INIT
Chuanhua Han
- [U-Boot] [PATCH 2/4] configs: ls1028aqds: Enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [PATCH 3/4] armv8: dts: ls1028aqds: Add pca9547 node under the i2c0 controller
Chuanhua Han
- [U-Boot] [PATCH 4/4] armv8: dts: ls1028aqds: Add pcf2127 node under i2c1
Chuanhua Han
- [U-Boot] [PATCH v4 1/7] armv8: lx2160a: The lx2160a platform supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v4 2/7] configs: lx2160ardb: enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [PATCH v4 3/7] drivers: i2c: mxc: Solve the compiler error when using i2c dm mode
Chuanhua Han
- [U-Boot] [PATCH v4 4/7] gpio: do not include <asm/arch/gpio.h> on ARCH_LX2160A
Chuanhua Han
- [U-Boot] [PATCH v4 5/7] armv8: dts: fsl-lx2160a: add i2c controller and gpio DT nodes
Chuanhua Han
- [U-Boot] [PATCH v4 6/7] armv8: lx2160ardb: Add pcf2127 node
Chuanhua Han
- [U-Boot] [PATCH v4 7/7] armv8: lx2160ardb : Add the "u-boot, dm-pre-reloc" property for i2c0 node
Chuanhua Han
- [U-Boot] [PATCH v3 1/2] configs: lx2160aqds: enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [PATCH v3 2/2] armv8: lx2160aqds : Add pcf2127 node
Chuanhua Han
- [U-Boot] [PATCH v4 1/4] armv8: ls1028a: The ls1028a platform supports the I2C driver model
Chuanhua Han
- [U-Boot] [PATCH v4 2/4] gpio: do not include <asm/arch/gpio.h> on ARCH_LS1028A
Chuanhua Han
- [U-Boot] [PATCH v4 3/4] configs: ls1028a: enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [PATCH v4 4/4] armv8: dts: ls1028ardb: Add slave nodes under the i2c0 controller
Chuanhua Han
- [U-Boot] [PATCH 2/2] configs: ls1028aqds: enable I2C and GPIO DM
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH 1/2] armv8: ls1028aqds: switch LS1028A QDS board to I2C DM
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH 2/4] configs: ls1028aqds: Enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH 2/4] configs: ls1028aqds: Enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH v4] rtc: Add DM support to ds3231
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH v4] rtc: Add DM support to ds3231
Chuanhua Han
- [U-Boot] [PATCH] rtc: ds3232/ds3231: Add support to generate 32KHz output for driver module
Chuanhua Han
- [U-Boot] [PATCH v3 1/5] armv8: ls2088a: The ls2088a platform supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v3 2/5] gpio: do not include <asm/arch/gpio.h> on ARCH_LS2080A
Chuanhua Han
- [U-Boot] [PATCH v3 3/5] configs: ls2088a: enable DM support for rtc
Chuanhua Han
- [U-Boot] [PATCH v3 4/5] armv8: dts: fsl-ls2088a: add i2c node support
Chuanhua Han
- [U-Boot] [PATCH v3 5/5] armv8: dts: ls2088ardb: Add slave nodes under the i2c0 controller
Chuanhua Han
- [U-Boot] [PATCH v2] rtc: ds3232/ds3231: Add support to generate 32KHz output for driver module
Chuanhua Han
- [U-Boot] [PATCH v3 1/5] armv8: ls1088a: The ls1088a platform supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v3 2/5] gpio: do not include <asm/arch/gpio.h> on ARCH_LS1088A
Chuanhua Han
- [U-Boot] [PATCH v3 3/5] configs: ls1088a: enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [PATCH v3 4/5] armv8: dts: fsl-ls1088a: add I2C node support
Chuanhua Han
- [U-Boot] [PATCH v3 5/5] armv8: dts: ls1088ardb: Add slave nodes under the i2c0 controller
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH v2] rtc: ds3232/ds3231: Add support to generate 32KHz output for driver module
Chuanhua Han
- [U-Boot] [PATCH 1/4] rtc: ds3232/ds3231: Add support to generate 32KHz output for driver module
Chuanhua Han
- [U-Boot] [PATCH 2/4] armv8: ls2088aqds: The ls2088aqds board supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH 3/4] configs: ls2088aqds: Enable DM support for ds3231 rtc
Chuanhua Han
- [U-Boot] [PATCH 4/4] armv8: ls2088aqds : Add ds3232 node
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH 2/4] armv8: ls2088aqds: The ls2088aqds board supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v2 1/4] rtc: ds3232/ds3231: Add support to generate 32KHz output for driver module
Chuanhua Han
- [U-Boot] [PATCH v2 2/4] armv8: ls2088aqds: The ls2088aqds board supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v2 3/4] configs: ls2088aqds: Enable DM support for ds3231 rtc
Chuanhua Han
- [U-Boot] [PATCH v2 4/4] armv8: ls2088aqds : Add ds3232 node
Chuanhua Han
- [U-Boot] [PATCH 1/3] armv8: ls1088aqds: The ls1088aqds board supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH 2/3] configs: ls1088aqds: Enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [PATCH 3/3] armv8: ls1088aqds : Add pcf2127 node
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH v2 4/4] armv8: ls2088aqds : Add ds3232 node
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH v2 1/4] rtc: ds3232/ds3231: Add support to generate 32KHz output for driver module
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH v2 2/4] armv8: ls2088aqds: The ls2088aqds board supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v3 1/4] rtc: ds3232/ds3231: Add support to generate 32KHz output for driver module
Chuanhua Han
- [U-Boot] [PATCH v3 2/4] armv8: ls2088aqds: The ls2088aqds board supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v3 3/4] armv8: ls2088aqds : Add ds3232 node
Chuanhua Han
- [U-Boot] [PATCH v3 4/4] configs: ls2088aqds: Enable DM support for ds3231 rtc
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH v2 4/4] armv8: ls2088aqds : Add ds3232 node
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH 1/3] armv8: ls1088aqds: The ls1088aqds board supports the I2C driver model.
Chuanhua Han
- [U-Boot] [EXT] Re: [PATCH v3 2/4] armv8: ls2088aqds: The ls2088aqds board supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v4 1/4] rtc: ds3232/ds3231: Add support to generate 32KHz output for driver module
Chuanhua Han
- [U-Boot] [PATCH v4 2/4] armv8: ls2088aqds: The ls2088aqds board supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v4 3/4] armv8: ls2088aqds : Add ds3232 node
Chuanhua Han
- [U-Boot] [PATCH v4 4/4] configs: ls2088aqds: Enable DM support for ds3231 rtc
Chuanhua Han
- [U-Boot] [PATCH v2 1/3] armv8: ls1088aqds: The ls1088aqds board supports the I2C driver model.
Chuanhua Han
- [U-Boot] [PATCH v2 2/3] armv8: ls1088aqds : Add pcf2127 node
Chuanhua Han
- [U-Boot] [PATCH v2 3/3] configs: ls1088aqds: Enable DM support for pcf2127 rtc
Chuanhua Han
- [U-Boot] [PATCH] ARM: imx: Support larger SPL size on IMX6DQ
Robert Hancock
- [U-Boot] [PATCH v2] spi: Add SPI controller driver for UniPhier SoCs
Kunihiko Hayashi
- [U-Boot] [PATCH] armv8: ls1028ardb: enable DisplayPort Power support
Wen He
- [U-Boot] [v2] armv8: ls1028ardb: enable DisplayPort Power support
Wen He
- [U-Boot] [PATCH] armv8: ls1028ardb: enable DisplayPort Power support
Wen He
- [U-Boot] [v3] armv8: ls1028ardb: enable DisplayPort Power support
Wen He
- [U-Boot] [PATCH 4/4] arm: dts: Set custom names for cp110 master/slave MDIO buses
Nevo Hed
- [U-Boot] [PATCH 4/4] arm: dts: Set custom names for cp110 master/slave MDIO buses
Nevo Hed
- [U-Boot] [PATCH 4/4] arm: dts: Set custom names for cp110 master/slave MDIO buses
Nevo Hed
- [U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Joe Hershberger
- [U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Joe Hershberger
- [U-Boot] [PATCH] net: mvpp2: support setting hardware addresses from ethernet core
Joe Hershberger
- [U-Boot] [u-boot 1/2] drivers/fsl-mc: Create Kconfig file to manage driver specific configs better
Joe Hershberger
- [U-Boot] [u-boot 2/2] drivers/fsl-mc: Support DPSPARSER object and apply spb command
Joe Hershberger
- [U-Boot] [PATCH] net: mscc: serval: Remove delay when serdes is configured
Joe Hershberger
- [U-Boot] [EXT] Re: [PATCH 1/2 v3] net: introduce MDIO DM class for MDIO devices
Joe Hershberger
- [U-Boot] [PATCH v5 0/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Joe Hershberger
- [U-Boot] [PATCH v5 1/5] driver: net: ti: cpsw-mdio: use phys_addr_t for mdio_base addr
Joe Hershberger
- [U-Boot] [PATCH v5 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Joe Hershberger
- [U-Boot] [PATCH v5 3/5] arm64: dts: ti: k3-am65: add mcu cpsw node
Joe Hershberger
- [U-Boot] [PATCH v5 4/5] arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defs
Joe Hershberger
- [U-Boot] [PATCH v5 5/5] configs: am65x_evm_a53: enable networking
Joe Hershberger
- [U-Boot] [PATCH 1/2] net: macb: Fixed reading MII_LPA register
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: macb: Add support for 1000-baseX
Joe Hershberger
- [U-Boot] [RESEND Patch] net: mscc: refactor mscc_miim
Joe Hershberger
- [U-Boot] [PATCH v3] net: phy: cortina: Use block layer to read from mmc
Joe Hershberger
- [U-Boot] [PATCH 1/6] net: macb: sync header definitions as taken from Linux
Joe Hershberger
- [U-Boot] [PATCH 2/6] net: macb: add support for faster clk rates
Joe Hershberger
- [U-Boot] [PATCH 3/6] net: macb: use bit access macro from header file
Joe Hershberger
- [U-Boot] [PATCH 4/6] net: macb: add support for SGMII phy interface
Joe Hershberger
- [U-Boot] [PATCH 5/6] net: macb: add dma_burst_length config
Joe Hershberger
- [U-Boot] [PATCH 6/6] net: macb: apply sane DMA configuration
Joe Hershberger
- [U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Joe Hershberger
- [U-Boot] [PATCH v6 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Joe Hershberger
- [U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Joe Hershberger
- [U-Boot] [u-boot 2/2] drivers/fsl-mc: Support DPSPARSER object and apply spb command
Joe Hershberger
- [U-Boot] [PATCH v2 1/4] phy: Add support for the NC-SI protocol
Joe Hershberger
- [U-Boot] [PATCH v2 2/4] phy: Include NC-SI in phy setup
Joe Hershberger
- [U-Boot] [PATCH v2 3/4] net/ftgmac100: Add NC-SI mode support
Joe Hershberger
- [U-Boot] [PATCH v2 4/4] net: NC-SI setup and handling
Joe Hershberger
- [U-Boot] [PATCH 1/4 v3] net: add MDIO_MUX DM class
Joe Hershberger
- [U-Boot] [PATCH 3/4 v3] test: dm_mdio: add a 2nd register to the emulated PHY
Joe Hershberger
- [U-Boot] [PATCH] net: add comments to phy APIs
Joe Hershberger
- [U-Boot] [PATCH v4 4/4] test: dm: add a test for MDIO MUX DM uclass
Joe Hershberger
- [U-Boot] [PATCH v4 2/4] doc: bindings: Add description for MDIO MUX dts nodes
Joe Hershberger
- [U-Boot] [PATCH v3 1/2] net: introduce packet capture support
Joe Hershberger
- [U-Boot] [PATCH v2 2/2] doc: pcap: add pcap cmd documentation
Joe Hershberger
- [U-Boot] [PATCH v3 1/2] net: introduce packet capture support
Joe Hershberger
- [U-Boot] [PATCH v3] drivers: net: phy: Use Aquantia driver for AQR112, AQR412
Joe Hershberger
- [U-Boot] [PATCH 1/8] net: tsec: Refactor the readout of the tbi-handle property
Joe Hershberger
- [U-Boot] [PATCH 3/8] net: tsec: Reverse Christmas tree notation
Joe Hershberger
- [U-Boot] [PATCH 4/8] net: tsec: Make errors visible
Joe Hershberger
- [U-Boot] [PATCH 5/8] net: tsec: Common handling of MAC station address for DM_ETH
Joe Hershberger
- [U-Boot] [PATCH 6/8] arm: ls1021atwr: Convert to use driver model TSEC driver
Joe Hershberger
- [U-Boot] [PATCH] net: designware: remove mdio bus on probe failure
Joe Hershberger
- [U-Boot] [PATCH] net/macb: increase RX buffer size for GEM
Joe Hershberger
- [U-Boot] [u-boot 2/2] drivers/fsl-mc: Support DPSPARSER object and apply spb command
Joe Hershberger
- [U-Boot] [PATCH 2/8] net: tsec: Fix offset of MDIO registers for DM_ETH
Joe Hershberger
- [U-Boot] [PATCH 1/1] net: assign maintainer for include/net.h
Joe Hershberger
- [U-Boot] [PATCH v3 1/2] net: introduce packet capture support
Joe Hershberger
- [U-Boot] [PATCH 1/1] net: unaligned copying of unsigned long
Joe Hershberger
- [U-Boot] [PATCH] cmd: mdio: prevent data abort when no mdio bus is found
Joe Hershberger
- [U-Boot] [PATCH 1/6] net: macb: sync header definitions as taken from Linux
Joe Hershberger
- [U-Boot] [PATCH v2] net/macb: increase RX buffer size for GEM
Joe Hershberger
- [U-Boot] [PATCH v2 8/9] configs: ls1021atwr: Fix distro_bootcmd for QSPI boot
Joe Hershberger
- [U-Boot] [PATCH 8/8] Add support for the NXP LS1021A-TSN board
Joe Hershberger
- [U-Boot] [PATCH 1/2] drivers: net: driver for MDIO muxes controlled over I2C
Joe Hershberger
- [U-Boot] [PATCH 1/6] net: macb: sync header definitions as taken from Linux
Joe Hershberger
- [U-Boot] [PATCH 8/8] Add support for the NXP LS1021A-TSN board
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] cmd: mii: Refactor some of the MII reg dump code
Joe Hershberger
- [U-Boot] cmd: mii: Add the standard 1000BASE-T registers
Joe Hershberger
- [U-Boot] net: phy: ti: Use default values for tx/rx delay and fifo size
Joe Hershberger
- [U-Boot] net: phy: ti: Fix clock output DT property
Joe Hershberger
- [U-Boot] net: mscc: serval: Remove delay when serdes is configured
Joe Hershberger
- [U-Boot] net: introduce MDIO DM class for MDIO devices
Joe Hershberger
- [U-Boot] test: dm: add MDIO test
Joe Hershberger
- [U-Boot] net: mscc: refactor mscc_miim
Joe Hershberger
- [U-Boot] net: phy: cortina: Use block layer to read from mmc
Joe Hershberger
- [U-Boot] driver: net: ti: cpsw-mdio: use phys_addr_t for mdio_base addr
Joe Hershberger
- [U-Boot] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Joe Hershberger
- [U-Boot] arm64: dts: ti: k3-am65: add mcu cpsw node
Joe Hershberger
- [U-Boot] arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defs
Joe Hershberger
- [U-Boot] configs: am65x_evm_a53: enable networking
Joe Hershberger
- [U-Boot] net: macb: Fixed reading MII_LPA register
Joe Hershberger
- [U-Boot] net: macb: Add support for 1000-baseX
Joe Hershberger
- [U-Boot] [PATCH v3] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Joe Hershberger
- [U-Boot] [PATCH v2 5/7] net: fec_mxc: Update driver to use full clks for iMX8
Joe Hershberger
- [U-Boot] [PATCH v2] net/macb: increase RX buffer size for GEM
Joe Hershberger
- [U-Boot] [PATCH 1/6] net: macb: sync header definitions as taken from Linux
Joe Hershberger
- [U-Boot] [PATCH v3 1/2] net: introduce packet capture support
Joe Hershberger
- [U-Boot] [PATCH v4 1/3] net: introduce packet capture support
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] drivers: net: phy: Use Aquantia driver for AQR112, AQR412
Joe Hershberger
- [U-Boot] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Joe Hershberger
- [U-Boot] net: add comments to phy APIs
Joe Hershberger
- [U-Boot] net: add MDIO_MUX DM class
Joe Hershberger
- [U-Boot] doc: bindings: Add description for MDIO MUX dts nodes
Joe Hershberger
- [U-Boot] test: dm_mdio: add a 2nd register to the emulated PHY
Joe Hershberger
- [U-Boot] test: dm: add a test for MDIO MUX DM uclass
Joe Hershberger
- [U-Boot] cmd: mdio: prevent data abort when no mdio bus is found
Joe Hershberger
- [U-Boot] net: designware: remove mdio bus on probe failure
Joe Hershberger
- [U-Boot] net: assign maintainer for include/net.h
Joe Hershberger
- [U-Boot] net: unaligned copying of unsigned long
Joe Hershberger
- [U-Boot] [PATCH v2] net: davinci_emac: convert to using the driver model
Joe Hershberger
- [U-Boot] [PATCH v4 1/6] include: configs: ls1028a: set SYS_RX_ETH_BUFFER to 8
Joe Hershberger
- [U-Boot] [PATCH v4 2/6] drivers: net: add NXP ENETC ethernet driver
Joe Hershberger
- [U-Boot] [PATCH v4 3/6] drivers: net: add NXP ENETC MDIO driver
Joe Hershberger
- [U-Boot] [PATCH v4 4/6] drivers: net: apply serdes configuration for ENETC Ethernet interfaces
Joe Hershberger
- [U-Boot] [PATCH v4 5/6] arm: dts: ls1028a updates for network interfaces
Joe Hershberger
- [U-Boot] [PATCH v4 6/6] configs: ls1028a: enable networking options in rdb, qds defconfig
Joe Hershberger
- [U-Boot] [PATCH] net: designware: use 'phy_connect' instead of open coded
Joe Hershberger
- [U-Boot] [PATCH] drivers: net: fsl_enetc: add support for SGMII 2500
Joe Hershberger
- [U-Boot] [PATCH v4 3/3] configs: sandbox: enable PCAP capture cmd
Joe Hershberger
- [U-Boot] [PATCH v4 1/3] net: introduce packet capture support
Joe Hershberger
- [U-Boot] [PATCH] net: sun8i_emac: Test the correct phy
Joe Hershberger
- [U-Boot] [PATCH v3 0/9] NXP LS1021A-TSN Board
Joe Hershberger
- [U-Boot] [PATCH 1/4] net: mdio-uclass: name MDIO according to device-name property if preset
Joe Hershberger
- [U-Boot] [PATCH 3/4] drivers: net: add marvell MDIO driver
Joe Hershberger
- [U-Boot] [PATCH 4/4] arm: dts: Set custom names for cp110 master/slave MDIO buses
Joe Hershberger
- [U-Boot] [PATCH 2/4] doc: bindings: add mdio.txt describing generic MDIO properties
Joe Hershberger
- [U-Boot] [PATCH v7 7/9] riscv: sifive: fu540: Setup ethaddr env variable using OTP
Joe Hershberger
- [U-Boot] [PATCH v10 3/4] riscv: sifive: fu540: Sync-up config header with RISC-V QEMU support
Joe Hershberger
- [U-Boot] [PATCH v10 4/4] doc: sifive-fu540: Update README to explicitly load DTB for Linux
Joe Hershberger
- [U-Boot] [PATCH v10 1/4] net: macb: Extend MACB driver for SiFive Unleashed board
Joe Hershberger
- [U-Boot] [PATCH v10 2/4] net: macb: Fix check for little-endian system in gmac_configure_dma()
Joe Hershberger
- [U-Boot] [PATCH 4/4] net: fec: add fuse check
Joe Hershberger
- [U-Boot] [PATCH v3 6/9] net: tsec: Change compatible strings to match Linux
Joe Hershberger
- [U-Boot] [PATCH v3 8/9] configs: ls1021atwr: Fix distro_bootcmd for QSPI boot
Joe Hershberger
- [U-Boot] [PATCH v3 9/9] Add support for the NXP LS1021A-TSN board
Joe Hershberger
- [U-Boot] [PATCH v2 1/6] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Joe Hershberger
- [U-Boot] [PATCH v2 2/6] net: phy: mv88e61xx: add CPU port parameter init for 88E6071
Joe Hershberger
- [U-Boot] [PATCH v2 1/6] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Joe Hershberger
- [U-Boot] [PATCH v2 3/6] net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071
Joe Hershberger
- [U-Boot] [PATCH v2 4/6] net: phy: mv88E61xx: add config option for mv88E6071 support
Joe Hershberger
- [U-Boot] [PATCH v2 5/6] net: phy: mv88e61xx: register phy_driver struct for 88E6071
Joe Hershberger
- [U-Boot] [PATCH v2 6/6] net: phy: fix switch vendor name
Joe Hershberger
- [U-Boot] [PATCH v2 2/2] doc: bindings: Add binding for register driven MDIO muxes
Joe Hershberger
- [U-Boot] [PATCH V2 4/4] net: fec: add fuse check
Joe Hershberger
- [U-Boot] [PATCH v3 0/9] NXP LS1021A-TSN Board
Joe Hershberger
- [U-Boot] [PATCH v2] net: davinci_emac: convert to using the driver model
Joe Hershberger
- [U-Boot] [PATCH v3 0/9] NXP LS1021A-TSN Board
Joe Hershberger
- [U-Boot] [PATCH 4/4] arm: dts: Set custom names for cp110 master/slave MDIO buses
Joe Hershberger
- [U-Boot] [PATCH v2 00/14] ARM: davinci: driver-model improvements
Joe Hershberger
- [U-Boot] [PATCH v11 2/4] net: macb: Fix check for little-endian system in gmac_configure_dma()
Joe Hershberger
- [U-Boot] [PATCH v11 1/4] net: macb: Extend MACB driver for SiFive Unleashed board
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] include: configs: ls1028a: set SYS_RX_ETH_BUFFER to 8
Joe Hershberger
- [U-Boot] drivers: net: add NXP ENETC ethernet driver
Joe Hershberger
- [U-Boot] drivers: net: add NXP ENETC MDIO driver
Joe Hershberger
- [U-Boot] drivers: net: apply serdes configuration for ENETC Ethernet interfaces
Joe Hershberger
- [U-Boot] arm: dts: ls1028a updates for network interfaces
Joe Hershberger
- [U-Boot] configs: ls1028a: enable networking options in rdb, qds defconfig
Joe Hershberger
- [U-Boot] drivers: net: fsl_enetc: add support for SGMII 2500
Joe Hershberger
- [U-Boot] net: designware: use 'phy_connect' instead of open coded
Joe Hershberger
- [U-Boot] drivers: net: driver for MDIO muxes controlled over I2C
Joe Hershberger
- [U-Boot] doc: bindings: Add binding for register driven MDIO muxes
Joe Hershberger
- [U-Boot] net: macb: sync header definitions as taken from Linux
Joe Hershberger
- [U-Boot] net: macb: add support for faster clk rates
Joe Hershberger
- [U-Boot] net: macb: use bit access macro from header file
Joe Hershberger
- [U-Boot] net: macb: add support for SGMII phy interface
Joe Hershberger
- [U-Boot] net: macb: add dma_burst_length config
Joe Hershberger
- [U-Boot] net: macb: apply sane DMA configuration
Joe Hershberger
- [U-Boot] net/macb: increase RX buffer size for GEM
Joe Hershberger
- [U-Boot] net: tsec: Refactor the readout of the tbi-handle property
Joe Hershberger
- [U-Boot] net: tsec: Fix offset of MDIO registers for DM_ETH
Joe Hershberger
- [U-Boot] net: tsec: Reverse Christmas tree notation
Joe Hershberger
- [U-Boot] net: tsec: Make errors visible
Joe Hershberger
- [U-Boot] net: tsec: Common handling of MAC station address for DM_ETH
Joe Hershberger
- [U-Boot] net: tsec: Change compatible strings to match Linux
Joe Hershberger
- [U-Boot] arm: ls1021atwr: Convert to use driver model TSEC driver
Joe Hershberger
- [U-Boot] configs: ls1021atwr: Fix distro_bootcmd for QSPI boot
Joe Hershberger
- [U-Boot] Add support for the NXP LS1021A-TSN board
Joe Hershberger
- [U-Boot] net: macb: Extend MACB driver for SiFive Unleashed board
Joe Hershberger
- [U-Boot] net: macb: Fix check for little-endian system in gmac_configure_dma()
Joe Hershberger
- [U-Boot] riscv: sifive: fu540: Sync-up config header with RISC-V QEMU support
Joe Hershberger
- [U-Boot] net: davinci_emac: convert to using the driver model
Joe Hershberger
- [U-Boot] net: sun8i_emac: Test the correct phy
Joe Hershberger
- [U-Boot] [PATCH v10 4/4] doc: sifive-fu540: Update README to explicitly load DTB for Linux
Joe Hershberger
- [U-Boot] [PATCH v2 1/6] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] [PATCH v2 00/14] ARM: davinci: driver-model improvements
Joe Hershberger
- [U-Boot] [PATCH v2 4/6] net: phy: mv88E61xx: add config option for mv88E6071 support
Joe Hershberger
- [U-Boot] [PATCH v3 6/6] net: phy: fix switch vendor name
Joe Hershberger
- [U-Boot] [PATCH v3 2/6] net: phy: mv88e61xx: add CPU port parameter init for 88E6071
Joe Hershberger
- [U-Boot] [PATCH v3 3/6] net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071
Joe Hershberger
- [U-Boot] [PATCH v3 5/6] net: phy: mv88e61xx: register phy_driver struct for 88E6071
Joe Hershberger
- [U-Boot] [PATCH v3 1/6] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Joe Hershberger
- [U-Boot] [PATCH 09/39] env: Move env_relocate() to env.h
Joe Hershberger
- [U-Boot] [PATCH 15/39] env: Move env_get_hex() to env.h
Joe Hershberger
- [U-Boot] [PATCH 14/39] env: Move env_get_yesno() to env.h
Joe Hershberger
- [U-Boot] [PATCH 11/39] env: Move env_set_hex() to env.h
Joe Hershberger
- [U-Boot] [PATCH 07/39] env: Move env_get_f() to env.h
Joe Hershberger
- [U-Boot] [PATCH 06/39] env: Move get_env_id() to env.h
Joe Hershberger
- [U-Boot] [PATCH 05/39] env: Create a new file for environment functions
Joe Hershberger
- [U-Boot] [PATCH 08/39] env: Move env_init() to env.h
Joe Hershberger
- [U-Boot] [PATCH 24/39] env: Move get/set_default_env() to env.h
Joe Hershberger
- [U-Boot] [PATCH 13/39] env: Move env_get_ulong() to env.h
Joe Hershberger
- [U-Boot] [PATCH 18/39] env: Move eth_env_get/set_enetaddr() to env.h
Joe Hershberger
- [U-Boot] [PATCH 28/39] env: Move env_valid to env.h
Joe Hershberger
- [U-Boot] [PATCH 21/39] env: Move env_load/save functions to env.h
Joe Hershberger
- [U-Boot] [PATCH 22/39] env: Move env import/export functions to env.h
Joe Hershberger
- [U-Boot] [PATCH 20/39] env: Move set_default_vars to env.h
Joe Hershberger
- [U-Boot] [PATCH 19/39] env: Move uncommon functions to env.h
Joe Hershberger
- [U-Boot] [PATCH 10/39] env: Move envmatch() to env.h
Joe Hershberger
- [U-Boot] [PATCH 37/39] env: Rename environment.h to env_internal.h
Joe Hershberger
- [U-Boot] [PATCH 17/39] env: Move env_get() to env.h
Joe Hershberger
- [U-Boot] [PATCH 12/39] env: Move env_set_ulong() to env.h
Joe Hershberger
- [U-Boot] [PATCH 33/39] env: Drop the ACTION typedef
Joe Hershberger
- [U-Boot] [PATCH 35/39] env: Move TOTAL_MALLOC_LEN to environment.h
Joe Hershberger
- [U-Boot] [PATCH 30/39] env: Drop the ENTRY typdef
Joe Hershberger
- [U-Boot] [PATCH 16/39] env: Move env_set() to env.h
Joe Hershberger
- [U-Boot] [PATCH 36/39] env: Drop environment.h header file where not needed
Joe Hershberger
- [U-Boot] [PATCH 25/39] env: Move env_get_char() to env.h
Joe Hershberger
- [U-Boot] [PATCH 23/39] env: Drop env_crc_update()
Joe Hershberger
- [U-Boot] [PATCH 26/39] env: Move env_reloc() to env.h
Joe Hershberger
- [U-Boot] [PATCH 27/39] env: Rename environment to embedded_environment
Joe Hershberger
- [U-Boot] [PATCH 29/39] env: Move callback definitions to env.h
Joe Hershberger
- [U-Boot] [PATCH 34/39] env: Drop the double underscores in search.h
Joe Hershberger
- [U-Boot] [PATCH 31/39] env: Drop _ENTRY
Joe Hershberger
- [U-Boot] [PATCH 32/39] env: Rename the redundancy flags
Joe Hershberger
- [U-Boot] [PATCH 1/2] net: Fix Covarity Defect 244093
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: mdio: Clarify code flow Covarity 244085 & 244090
Joe Hershberger
- [U-Boot] [PATCH v2] net: mvpp2: support setting hardware addresses from ethernet core
Joe Hershberger
- [U-Boot] [PATCH 1/1] drivers: net: pfe_eth: undefined return value
Joe Hershberger
- [U-Boot] [PATCH v2 1/1] test: dm_mdio: avoid out of bounds access
Joe Hershberger
- [U-Boot] [PATCH 31/39] env: Drop _ENTRY
Joe Hershberger
- [U-Boot] [PATCH 32/39] env: Rename the redundancy flags
Joe Hershberger
- [U-Boot] [PATCH 31/39] env: Drop _ENTRY
Joe Hershberger
- [U-Boot] [PATCH] net: phy: ti: Use default values for tx/rx delay and fifo size
Joseph Hershberger
- [U-Boot] [PATCH] net: phy: ti: Fix clock output DT property
Joseph Hershberger
- [U-Boot] [PATCH v7 7/9] riscv: sifive: fu540: Setup ethaddr env variable using OTP
Joey Hewitt
- [U-Boot] [PATCH v1] test/py: add MMC/SD block write test
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1] test/py: add MMC/SD block write test
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2] cmd: mem: Add a command to fill the memory with random data
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2] cmd: mem: Add a command to fill the memory with random data
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 00/11] Improvements on the MMC switch
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 01/11] mmc: omap_hsmmc: reset FSM for DAT and CMD lines if needed before a new command
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 02/11] mmc: omap_hsmmc: don't fill the send_init_stream callback
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 03/11] Revert "mmc: Add a new callback function to perform the 74 clocks cycle sequence"
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 04/11] mmc: omap_hsmmc: provide wait_dat0 even if UHS modes are not supported
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 05/11] mmc: add mmc_poll_for_busy() and change the purpose of mmc_send_status()
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 06/11] mmc: if possible, poll the busy state using DAT0
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 07/11] mmc: use the generic timeout for cmd6 (SWITCH) provided in the ext_csd
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 08/11] mmc: When switching partition, use the timeout specified in the ext_csd
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 09/11] mmc: During a switch, poll on dat0 if available and check the final status
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 10/11] mmc: do not change mode when accessing a boot partition
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 11/11] mmc: retry a few times if a partition switch failed
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 13/18] usb: dwc3: Kconfig: get rid of obsolete mode selection
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3] cmd: mem: Add a command to fill the memory with random data
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 13/18] usb: dwc3: Kconfig: get rid of obsolete mode selection
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 13/18] usb: dwc3: Kconfig: get rid of obsolete mode selection
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 0/3] Fixes for the DWC3-generic glue driver
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 1/3] usb: dwc3-generic: remove dm_scan_fdt_dev() from the remove() callback
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 2/3] dm: Add a No-op uclass
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 3/3] usb: dwc3: Use UCLASS_NOP instead of UCLASS_MISC for the DWC3 generic glue
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 13/18] usb: dwc3: Kconfig: get rid of obsolete mode selection
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 0/3] Fixes for the DWC3-generic glue driver
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 0/3] Fixes for the DWC3-generic glue driver
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 07/11] mmc: use the generic timeout for cmd6 (SWITCH) provided in the ext_csd
Jean-Jacques Hiblot
- [U-Boot] [PATCH 2/7] mmc: Parse HS400 Enhanced strobe DT properties
Jean-Jacques Hiblot
- [U-Boot] [PATCH 3/7] mmc: Parse no-1-8-v DT property
Jean-Jacques Hiblot
- [U-Boot] [PATCH 1/7] mmc: support hs400 enhanced strobe mode
Jean-Jacques Hiblot
- [U-Boot] [PATCH PATCH v3 00/12] Add support for applications of overlays in SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH] i.mx7: board: Add support for the Ronetix's i.MX7-CM board
Ilko Iliev
- [U-Boot] imx7d: CPU core issue in secure mode
Tobias Junghans
- [U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode
Tobias Junghans
- [U-Boot] imx7d: CPU core issue in secure mode
Tobias Junghans
- [U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode
Tobias Junghans
- [U-Boot] [PATCH] riscv : serial: use rx watermark to indicate rx data is present
Sagar Kadam
- [U-Boot] [PATCH] riscv : serial: use rx watermark to indicate rx data is present
Sagar Kadam
- [U-Boot] [PATCH v6 0/4] SiFive SPI MMC Support
Sagar Kadam
- [U-Boot] [PATCH] riscv : serial: use rx watermark to indicate rx data is present
Sagar Kadam
- [U-Boot] [PATCH] sifive: riscv: update Hifive Unleashed configuration infrastructure
Sagar Kadam
- [U-Boot] [PATCH] sifive: riscv: update Hifive Unleashed configuration infrastructure
Sagar Kadam
- [U-Boot] [U-Boot,v9,0/9] Update SiFive Unleashed Drivers
Sagar Shrikant Kadam
- [U-Boot] [PATCH] riscv: serial: fix to load binary file over y-modem
Sagar Shrikant Kadam
- [U-Boot] [PATCH] riscv : serial: use rx watermark to indicate rx data is present
Sagar Shrikant Kadam
- [U-Boot] [PATCH] sifive: riscv: streamline HiFive Unleashed configuration infrastructure
Sagar Shrikant Kadam
- [U-Boot] [PATCH] sifive: riscv: update Hifive Unleashed configuration infrastructure
Sagar Shrikant Kadam
- [U-Boot] [PATCH v5 0/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Keerthy
- [U-Boot] [PATCH v5 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Keerthy
- [U-Boot] [PATCH v5 5/5] configs: am65x_evm_a53: enable networking
Keerthy
- [U-Boot] [PATCH v6 0/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Keerthy
- [U-Boot] [PATCH v6 1/5] driver: net: ti: cpsw-mdio: use phys_addr_t for mdio_base addr
Keerthy
- [U-Boot] [PATCH v6 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Keerthy
- [U-Boot] [PATCH v6 3/5] arm64: dts: ti: k3-am65: add mcu cpsw node
Keerthy
- [U-Boot] [PATCH v6 4/5] arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defs
Keerthy
- [U-Boot] [PATCH v6 5/5] configs: am65x_evm_a53: enable networking
Keerthy
- [U-Boot] [PATCH v6 5/5] configs: am65x_evm_a53: enable networking
Keerthy
- [U-Boot] [PATCH v6 1/5] driver: net: ti: cpsw-mdio: use phys_addr_t for mdio_base addr
Keerthy
- [U-Boot] [PATCH] doc: arch: sandbox: Replace all the instances of README.sandbox
Keerthy
- [U-Boot] [PATCH] rockchip: dts: rk3399: Add spl-boot-order for Rock PI 4
Mark Kettenis
- [U-Boot] [PATCH] rockchip: make_fit_atf.py: fix loadables property set error
Mark Kettenis
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Mark Kettenis
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Mark Kettenis
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Mark Kettenis
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Mark Kettenis
- [U-Boot] [PATCH 1/2] rk3399: Restore broken USB3 DTS description.
Mark Kettenis
- [U-Boot] [PATCH 0/3] amlogic: Add support for Odroid-N2
Mark Kettenis
- [U-Boot] [PATCH v6 1/5] driver: net: ti: cpsw-mdio: use phys_addr_t for mdio_base addr
Alex Kiernan
- [U-Boot] [PATCH] spl_mmc: always use find_mmc_device() to get mmc handler
Alex Kiernan
- [U-Boot] U-Boot/EBBR plugfest at ELC-EU?
Daniel Kiper
- [U-Boot] U-Boot/EBBR plugfest at ELC-EU?
Daniel Kiper
- [U-Boot] (Offlist) Re: U-Boot/EBBR plugfest at ELC-EU?
Daniel Kiper
- [U-Boot] (Offlist) Re: U-Boot/EBBR plugfest at ELC-EU?
Daniel Kiper
- [U-Boot] [PATCH v2 0/5] nitrogen6x device tree migration
Troy Kisky
- [U-Boot] [PATCH v3 0/5] nitrogen6x device tree migration
Troy Kisky
- [U-Boot] [PATCH v3 1/5] nitrogen6x: migrate to using device tree
Troy Kisky
- [U-Boot] [PATCH v3 2/5] configs: nitrogen6x: Add DM_MMC/DM_USB/AHCI support
Troy Kisky
- [U-Boot] [PATCH v3 3/5] nitrogen6x: reserve used gpios
Troy Kisky
- [U-Boot] [PATCH v3 4/5] configs: nitrogen6x: Add DM_GPIO support
Troy Kisky
- [U-Boot] [PATCH v3 5/5] configs: nitrogen6x: Add DM_SPI/DM_SPI_FLASH support
Troy Kisky
- [U-Boot] [linux-sunxi] [PATCH] phy: sun4i-usb: Fix PHY0 routing and passby configuration for MUSB
Paul Kocialkowski
- [U-Boot] [linux-sunxi] [PATCH] phy: sun4i-usb: Fix PHY0 routing and passby configuration for MUSB
Paul Kocialkowski
- [U-Boot] [BUG] efi: stalled execution state
Matwey V. Kornilov
- [U-Boot] zynq_z_turn_defconfig: no info from SPL
Matwey V. Kornilov
- [U-Boot] [PATCH 19/24] rockchip: rk3328: Migrate to use common board file
Matwey V. Kornilov
- [U-Boot] zynq_z_turn_defconfig: no info from SPL
Matwey V. Kornilov
- [U-Boot] [PATCH 1/2] rockchip: rk3328: set DDR as non-secure in SPL
Matwey V. Kornilov
- [U-Boot] [PATCH 2/2] rockchip: rk3328: enable DMA for MMCs at Rock64
Matwey V. Kornilov
- [U-Boot] [PATCH 0/7] Add TPL support for Pine64 Rock64 board.
Matwey V. Kornilov
- [U-Boot] [PATCH 1/7] rockchip: ram: add full feature rk3328 DRAM driver
Matwey V. Kornilov
- [U-Boot] [PATCH 2/7] rockchip: dts: rk3328: update dmc node for driver
Matwey V. Kornilov
- [U-Boot] [PATCH 3/7] rockchip: dts: rk3328: enable the drivers need by TPL/SPL
Matwey V. Kornilov
- [U-Boot] [PATCH 4/7] rockchip: Kconfig: enable TPL support for rk3328
Matwey V. Kornilov
- [U-Boot] [PATCH 5/7] rockchip: evb-rk3328: enable defconfig options for TPL/SPL
Matwey V. Kornilov
- [U-Boot] [PATCH 6/7] configs: rk3328: enable TPL for rock64-rk3328_defconfig
Matwey V. Kornilov
- [U-Boot] [PATCH 7/7] doc: rockchip: Adapt Pine64 Rock64 board instructions
Matwey V. Kornilov
- [U-Boot] [BISECTED] [BUG]: MMC initialization hang at Zynq Z-turn board
Matwey V. Kornilov
- [U-Boot] [PATCH 1/1 v1] arm: mvebu: crs305-1g-4s: Enable CMD_BOOTZ and increase SYS_BOOTM_LEN
Luka Kovacic
- [U-Boot] [PATCH v2] sunxi: Add H6 SPI SPL support
Marek Kraus
- [U-Boot] [PATCH] configs: ls1043aqds: Move CONFIG_FSL_QSPI to defconfig
Ashish Kumar
- [U-Boot] [Patch V3] drivers: mtd: spi: Add flash property for Micron mt25qu512a
Ashish Kumar
- [U-Boot] [Patch V3] drivers: mtd: spi: Add micron mt35xu512g and mt35xu02g flash ID
Ashish Kumar
- [U-Boot] [Patch V3] drivers: mtd :spi: Enable 4B opcodes for SPANSION s25fl512s
Ashish Kumar
- [U-Boot] [EXT] Re: [PATCH] drivers: mtd :spi: Enable 4B opcodes for SPANSION s25fl512s
Ashish Kumar
- [U-Boot] [EXT] Re: [Patch V3] drivers: mtd: spi: Add micron mt35xu512g and mt35xu02g flash ID
Ashish Kumar
- [U-Boot] [EXT] Re: [Patch V3] drivers: mtd :spi: Enable 4B opcodes for SPANSION s25fl512s
Ashish Kumar
- [U-Boot] [Patch v4] drivers: mtd: spi: Add micron mt35xu512a and mt35xu02g flash ID
Ashish Kumar
- [U-Boot] [Patch v5] drivers: mtd: spi: Add micron mt35xu512a and mt35xu02g flash ID
Ashish Kumar
- [U-Boot] [EXT] Re: [Patch v4] drivers: mtd: spi: Add micron mt35xu512a and mt35xu02g flash ID
Ashish Kumar
- [U-Boot] [EXT] Re: [Patch v4] drivers: mtd: spi: Add micron mt35xu512a and mt35xu02g flash ID
Ashish Kumar
- [U-Boot] [EXT] Re: [Patch v4] drivers: mtd: spi: Add micron mt35xu512a and mt35xu02g flash ID
Ashish Kumar
- [U-Boot] [EXT] Re: [Patch V3] drivers: mtd :spi: Enable 4B opcodes for SPANSION s25fl512s
Ashish Kumar
- [U-Boot] [EXT] Re: [Patch V3] drivers: mtd :spi: Enable 4B opcodes for SPANSION s25fl512s
Ashish Kumar
- [U-Boot] [RFC PATCH] fastboot: Implement fetching uboot env variables via fastboot getvar
Priit Laes
- [U-Boot] [PATCH 1/3] MAINTAINERS: MediaTek: add MediaTek team in the entry
Ryder Lee
- [U-Boot] [PATCH 2/3] ARM: dts: add hifsys reset for MediaTek SoCs
Ryder Lee
- [U-Boot] [PATCH 3/3] clk: MediaTek: add hifsys entry for MT7623 SoC.
Ryder Lee
- [U-Boot] [PATCH 3/4] pci: mediatek: Add pci-driver for mt2701
Ryder Lee
- [U-Boot] [PATCH 3/4] pci: mediatek: Add pci-driver for mt2701
Ryder Lee
- [U-Boot] [PATCH 3/4] pci: mediatek: Add pci-driver for mt2701
Ryder Lee
- [U-Boot] [PATCH 1/5] imx8: Add lpcg driver for iMX8QM/QXP
Ye Li
- [U-Boot] [PATCH 2/5] misc: scu_api: Add new APIs for clk-imx8 driver
Ye Li
- [U-Boot] [PATCH 3/5] clk: imx8: Update imx8 clock driver
Ye Li
- [U-Boot] [PATCH 4/5] imx8qm_mek: increase the size of early malloc pool
Ye Li
- [U-Boot] [PATCH 5/5] net: fec_mxc: Update driver to use full clks for iMX8
Ye Li
- [U-Boot] [PATCH v2 1/7] imx8: Add lpcg driver for iMX8QM/QXP
Ye Li
- [U-Boot] [PATCH v2 2/7] misc: scu_api: Add new APIs for clk-imx8 driver
Ye Li
- [U-Boot] [PATCH v2 3/7] clk: imx8: Update imx8 clock driver
Ye Li
- [U-Boot] [PATCH v2 4/7] imx8qm_mek: increase the size of early malloc pool
Ye Li
- [U-Boot] [PATCH v2 5/7] net: fec_mxc: Update driver to use full clks for iMX8
Ye Li
- [U-Boot] [PATCH v2 6/7] imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot
Ye Li
- [U-Boot] [PATCH v2 7/7] imx8qm/qxp: Enable UART0 LPCG clock for early serial
Ye Li
- [U-Boot] [EXT] Re: [PATCH 5/5] net: fec_mxc: Update driver to use full clks for iMX8
Ye Li
- [U-Boot] [EXT] Re: [PATCH 3/5] clk: imx8: Update imx8 clock driver
Ye Li
- [U-Boot] [EXT] Re: [PATCH 3/5] clk: imx8: Update imx8 clock driver
Ye Li
- [U-Boot] [PATCH] spi: spi-mem: Fix read data size issue
Ye Li
- [U-Boot] [PATCH] spi: fsl_qspi: Fix flash write issue on i.MX7ULP
Ye Li
- [U-Boot] [PATCH 1/2] i2c-mux-gpio: Fix GPIO request flag issue
Ye Li
- [U-Boot] [PATCH 2/2] i2c: mxc_i2c: Remove i2c_idle_bus from probe
Ye Li
- [U-Boot] [PATCH] imx6dq: Fix chip version issue for rev1.3
Ye Li
- [U-Boot] [PATCH] mmc: fsl_esdhc_imx: fix config check issue when building in SPL
Ye Li
- [U-Boot] [PATCH] serial_lpuart: Fix config check issue when using clk driver in SPL
Ye Li
- [U-Boot] [PATCH 1/2] imx8: Jump from alias to OCRAM address at SPL init
Ye Li
- [U-Boot] [PATCH 2/2] imx8qm/qxp: Set SPL TEXT base to OCRAM base
Ye Li
- [U-Boot] (Offlist) Re: U-Boot/EBBR plugfest at ELC-EU?
Grant Likely
- [U-Boot] [PATCH 0/4] Improve HAB support for SPL targets
Breno Matheus Lima
- [U-Boot] [PATCH 1/4] Kconfig: Migrate CONFIG_CSF_SIZE to Kconfig
Breno Matheus Lima
- [U-Boot] [PATCH 2/4] habv4: tools: Avoid hardcoded CSF size for SPL targets
Breno Matheus Lima
- [U-Boot] [PATCH 3/4] imx6: spl: Reduce SPL limit size in case CONFIG_SECURE_BOOT is enabled
Breno Matheus Lima
- [U-Boot] [PATCH 4/4] imx: configs: Cleanup CONFIG_SECURE_BOOT comments
Breno Matheus Lima
- [U-Boot] [PATCH] mx6ulevk: Add support for SDP boot in SPL target
Breno Matheus Lima
- [U-Boot] [PATCH] mx6ulevk: Include SDP boot instructions in README
Breno Matheus Lima
- [U-Boot] [PATCH v2] mx6ulevk: Include SDP boot instructions in README
Breno Matheus Lima
- [U-Boot] [PATCH 0/9] km: Kconfig and driver model implementations
Pascal Linder
- [U-Boot] [PATCH 1/9] km: add Kconfig menus for KM boards
Pascal Linder
- [U-Boot] [PATCH 2/9] km: remove obsolete definitions in KM header files
Pascal Linder
- [U-Boot] [PATCH 3/9] km: clean up header files for KM Kirkwood boards
Pascal Linder
- [U-Boot] [PATCH 4/9] km: fixed typo in KM Kirkwood header file
Pascal Linder
- [U-Boot] [PATCH 5/9] km/uart: port UART interface of KM Kirkwood boards to driver model
Pascal Linder
- [U-Boot] [PATCH 6/9] km/rgmii: port Ethernet interface of KM Kirkwood boards to driver model
Pascal Linder
- [U-Boot] [PATCH 7/9] km/arm: remove unmaintained target PORTL2
Pascal Linder
- [U-Boot] [PATCH 8/9] powerpc/km: remove unmaintained target KMVECT1
Pascal Linder
- [U-Boot] [PATCH 9/9] powerpc/km: remove unmaintained board KMLION1
Pascal Linder
- [U-Boot] [BUG] Wandboard fails to boot via U-Boot bootefi, GRUB
Leif Lindholm
- [U-Boot] [BUG] Wandboard fails to boot via U-Boot bootefi, GRUB
Leif Lindholm
- [U-Boot] [BUG] Wandboard fails to boot via U-Boot bootefi, GRUB
Leif Lindholm
- [U-Boot] [BUG] Wandboard fails to boot via U-Boot bootefi, GRUB
Leif Lindholm
- [U-Boot] [BUG] Wandboard fails to boot via U-Boot bootefi, GRUB
Leif Lindholm
- [U-Boot] [BUG] Wandboard fails to boot via U-Boot bootefi, GRUB
Leif Lindholm
- [U-Boot] U-Boot/EBBR plugfest at ELC-EU?
Leif Lindholm
- [U-Boot] [RFC 1/1] efi_loader: usage of cleanup_before_linux()
Leif Lindholm
- [U-Boot] [RFC 1/1] efi_loader: usage of cleanup_before_linux()
Leif Lindholm
- [U-Boot] 答复: [EXT] Re: Upstreaming usb host drivers for iMX8/iMX8M
Ying Liu
- [U-Boot] [EXT] [PATCH v2 2/4] doc: bindings: add mdio.txt describing generic MDIO properties
Ken Ma
- [U-Boot] [EXT] [PATCH v2 2/4] doc: bindings: add mdio.txt describing generic MDIO properties
Ken Ma
- [U-Boot] [PATCH V2 1/2] watchdog: Split WDT from SPL_WDT
Suniel Mahesh
- [U-Boot] [PATCH v2 1/3] board_r: move initr_watchdog to be called after initr_serial
Suniel Mahesh
- [U-Boot] [PATCH V2 1/2] watchdog: Split WDT from SPL_WDT
Suniel Mahesh
- [U-Boot] [PATCH V2 1/2] watchdog: Split WDT from SPL_WDT
Suniel Mahesh
- [U-Boot] [PATCH 2/2] watchdog: omap_wdt: Disable DM watchdog support in SPL
Suniel Mahesh
- [U-Boot] [PATCH] usb: gadget: f_dfu.c: fix memory leak
Lukasz Majewski
- [U-Boot] Question regarding the Common Clock Framework CCF v5 patches
Lukasz Majewski
- [U-Boot] Question regarding the Common Clock Framework CCF v5 patches
Lukasz Majewski
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Lukasz Majewski
- [U-Boot] [PATCH 3/5] clk: imx8: Update imx8 clock driver
Lukasz Majewski
- [U-Boot] [PATCH 5/5] net: fec_mxc: Update driver to use full clks for iMX8
Lukasz Majewski
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Lukasz Majewski
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Lukasz Majewski
- [U-Boot] [PATCH V2 18/51] imx8m: add clk support for i.MX8MM
Lukasz Majewski
- [U-Boot] [PATCH V2 18/51] imx8m: add clk support for i.MX8MM
Lukasz Majewski
- [U-Boot] [PATCH] config: imx53: Disable support for EFI on HSC|DDC boards
Lukasz Majewski
- [U-Boot] [PATCH] FIX: ARM: IMX: Add compatible 'fsl, imx53-uart' to NXP's serial driver
Lukasz Majewski
- [U-Boot] [PATCH v2] serial: mxc: Add compatibles to NXP's serial driver (for imx21 and imx53)
Lukasz Majewski
- [U-Boot] [PATCH] FIX: ARM: IMX: Add compatible 'fsl, imx53-uart' to NXP's serial driver
Lukasz Majewski
- [U-Boot] [PATCH V2 18/51] imx8m: add clk support for i.MX8MM
Lukasz Majewski
- [U-Boot] [EXT] Re: [PATCH 3/5] clk: imx8: Update imx8 clock driver
Lukasz Majewski
- [U-Boot] [PATCH v5 00/18] clk: Port Linux common clock framework [CCF] to U-boot (tag: v5.1.12)
Lukasz Majewski
- [U-Boot] [PATCH V2 04/51] i2c: mxc: add CONFIG_CLK support
Lukasz Majewski
- [U-Boot] [PATCH V2 50/51] imx: add dtsi for i.MX8MN
Lukasz Majewski
- [U-Boot] [PATCH V2 51/51] imx: add i.MX8MN DDR4 board support
Lukasz Majewski
- [U-Boot] [PATCH V2 50/51] imx: add dtsi for i.MX8MN
Lukasz Majewski
- [U-Boot] [EXT] Re: [PATCH 3/5] clk: imx8: Update imx8 clock driver
Lukasz Majewski
- [U-Boot] [PATCH V2 18/51] imx8m: add clk support for i.MX8MM
Lukasz Majewski
- [U-Boot] [PATCH V2 51/51] imx: add i.MX8MN DDR4 board support
Lukasz Majewski
- [U-Boot] [EXT] Re: [PATCH v4] rtc: Add DM support to ds3231
Lukasz Majewski
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Lukasz Majewski
- [U-Boot] [PATCH 1/4] imx: spl: Change USB boot device type
Lukasz Majewski
- [U-Boot] [PATCH 2/4] SDP: use CONFIG_SDP_LOADADDR as default load address
Lukasz Majewski
- [U-Boot] [PATCH 3/4] SDP: fix wrong usb request size and add high speed endpoint descriptor
Lukasz Majewski
- [U-Boot] [PATCH 4/4] SDP: Call usb_gadget_initialize and usb_gadget_release to support UDC
Lukasz Majewski
- [U-Boot] [PATCH 1/4] imx: spl: Change USB boot device type
Lukasz Majewski
- [U-Boot] [PATCH 1/4] imx: spl: Change USB boot device type
Lukasz Majewski
- [U-Boot] [RFC PATCH 01/14] dfu: cosmetic: cleanup sf to avoid checkpatch error
Lukasz Majewski
- [U-Boot] [RFC PATCH 02/14] dfu: sf: add partition support for nor backend
Lukasz Majewski
- [U-Boot] [RFC PATCH 03/14] dfu: prepare the support of multiple interface
Lukasz Majewski
- [U-Boot] [RFC PATCH 04/14] dfu: allow to manage DFU on several devices
Lukasz Majewski
- [U-Boot] [RFC PATCH 05/14] dfu: allow read with 0 data for EOF indication
Lukasz Majewski
- [U-Boot] [RFC PATCH 06/14] dfu: add backend for MTD device
Lukasz Majewski
- [U-Boot] [RFC PATCH 07/14] dfu: add partition support for MTD backend
Lukasz Majewski
- [U-Boot] [RFC PATCH 08/14] dfu: add DFU virtual backend
Lukasz Majewski
- [U-Boot] [RFC PATCH 09/14] dfu: add callback for flush and initiated operation
Lukasz Majewski
- [U-Boot] [RFC PATCH 00/14] dfu: update dfu stack and use them for stm32mp1
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (22.07.2019)
Lukasz Majewski
- [U-Boot] [PATCH v2 3/3] usb: gadget: f_sdp: Allow SPL to load and boot FIT via SDP
Lukasz Majewski
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Lukasz Majewski
- [U-Boot] [PATCH v2 00/18] autoboot: Tidy up autoboot code
Lukasz Majewski
- [U-Boot] [PATCH 1/4] imx: add module fuse support
Lukasz Majewski
- [U-Boot] [PATCH v4 0/2] Add board support for iMX8QXP AI_ML board
Lukasz Majewski
- [U-Boot] [PATCH v4 1/2] arm: dts: Add devicetree support for iMXQXP AI_ML board
Lukasz Majewski
- [U-Boot] [PATCH v4 2/2] board: Add support for iMX8QXP AI_ML board
Lukasz Majewski
- [U-Boot] [PATCH 1/4] imx: add module fuse support
Lukasz Majewski
- [U-Boot] [PATCH v2 1/3] pinctrl: nxp: DM_FLAG_PRE_RELOC by default
Lukasz Majewski
- [U-Boot] [PATCH 1/4] imx: add module fuse support
Lukasz Majewski
- [U-Boot] [PATCH] imx: bk4: Print proper HW revision of VF610's BK4 board
Lukasz Majewski
- [U-Boot] [PATCH 01/16] clk: introduce clk_dev_binded
Lukasz Majewski
- [U-Boot] [PATCH 01/16] clk: introduce clk_dev_binded
Lukasz Majewski
- [U-Boot] [PATCH v2 00/11] dm: Convert TPC70 to use DM and DTS in SPL and u-boot proper
Lukasz Majewski
- [U-Boot] [PATCH v2 01/11] imx: tpc70: config: Add script commands to update u-boot and OE's wic
Lukasz Majewski
- [U-Boot] [PATCH v2 02/11] imx: tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update
Lukasz Majewski
- [U-Boot] [PATCH v2 03/11] imx: tpc70: Add board_boot_order() to distinguish between eMMC and SD boot
Lukasz Majewski
- [U-Boot] [PATCH v2 04/11] imx: tpc70: DTS: Explicitly add imx6q-kp.dtb to Makefile for DTB compilation
Lukasz Majewski
- [U-Boot] [PATCH v2 05/11] imx: tpc70: cosmetic: Replace magic numbers when setting ENET clock
Lukasz Majewski
- [U-Boot] [PATCH v2 06/11] imx: tpc70: led: Enable LED default state
Lukasz Majewski
- [U-Boot] [PATCH v2 07/11] imx: tpc70: dts: Add TPC70 board (imx6q based) device tree description
Lukasz Majewski
- [U-Boot] [PATCH v2 08/11] imx: dts: Add u-boot specific set of device tree properties for tpc70
Lukasz Majewski
- [U-Boot] [PATCH v2 09/11] imx: tpc70: Convert TPC70 (imx6q) board to use DM/DTS in SPL and u-boot
Lukasz Majewski
- [U-Boot] [PATCH v2 10/11] imx: spl: tpc70: Do not remove clock related properties from DTS
Lukasz Majewski
- [U-Boot] [PATCH v2 11/11] imx: config: Update KP's TPC70 config to support SWUpdate
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-clk (31.07.2019)
Lukasz Majewski
- [U-Boot] [PATCH 1/6] arm64: rockchip: rock960: sync dts files from Linux 5.2-rc6
Mani
- [U-Boot] [PATCH 2/6] configs: rockchip: rock960: drop options for non-existent HW
Mani
- [U-Boot] [PATCH 3/6] configs: rockchip: rock960: enable pmic and regulator commands
Mani
- [U-Boot] [PATCH 4/6] configs: rockchip: rock960: enable DMA for SDHCI controller
Mani
- [U-Boot] [PATCH 5/6] configs: rockchip: rock960: Add support for USB ethernet adapters
Mani
- [U-Boot] [PATCH 6/6] configs: rockchip: rock960: enable USB3 support
Mani
- [U-Boot] Improvements to Rock960
Mani
- [U-Boot] [PATCH 1/6 v3] include: configs: ls1028a: set SYS_RX_ETH_BUFFER to 8
Alex Marginean
- [U-Boot] [PATCH 6/6 v3] configs: ls1028a: enable networking options in rds, qds defconfig
Alex Marginean
- [U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Alex Marginean
- [U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Alex Marginean
- [U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Alex Marginean
- [U-Boot] [PATCH v4 0/6] ls1028a: networking support
Alex Marginean
- [U-Boot] [PATCH v4 1/6] include: configs: ls1028a: set SYS_RX_ETH_BUFFER to 8
Alex Marginean
- [U-Boot] [PATCH v4 2/6] drivers: net: add NXP ENETC ethernet driver
Alex Marginean
- [U-Boot] [PATCH v4 3/6] drivers: net: add NXP ENETC MDIO driver
Alex Marginean
- [U-Boot] [PATCH v4 4/6] drivers: net: apply serdes configuration for ENETC Ethernet interfaces
Alex Marginean
- [U-Boot] [PATCH v4 5/6] arm: dts: ls1028a updates for network interfaces
Alex Marginean
- [U-Boot] [PATCH v4 6/6] configs: ls1028a: enable networking options in rdb, qds defconfig
Alex Marginean
- [U-Boot] [PATCH v2] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Alex Marginean
- [U-Boot] [PATCH v3] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Alex Marginean
- [U-Boot] [PATCH 2/4 v3] doc: bindings: Add description for MDIO MUX dts nodes
Alex Marginean
- [U-Boot] [PATCH 4/4 v3] test: dm: add a test for MDIO MUX DM uclass
Alex Marginean
- [U-Boot] [EXT] Re: [PATCH 1/2 v3] net: introduce MDIO DM class for MDIO devices
Alex Marginean
- [U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Alex Marginean
- [U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Alex Marginean
- [U-Boot] [PATCH v4 1/4] net: add MDIO_MUX DM class
Alex Marginean
- [U-Boot] [PATCH v4 2/4] doc: bindings: Add description for MDIO MUX dts nodes
Alex Marginean
- [U-Boot] [PATCH v4 3/4] test: dm_mdio: add a 2nd register to the emulated PHY
Alex Marginean
- [U-Boot] [PATCH v4 4/4] test: dm: add a test for MDIO MUX DM uclass
Alex Marginean
- [U-Boot] [PATCH] net: add comments to phy APIs
Alex Marginean
- [U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Alex Marginean
- [U-Boot] [PATCH v5 1/4] net: add MDIO_MUX DM class
Alex Marginean
- [U-Boot] [PATCH v5 2/4] doc: bindings: Add description for MDIO MUX dts nodes
Alex Marginean
- [U-Boot] [PATCH v5 3/4] test: dm_mdio: add a 2nd register to the emulated PHY
Alex Marginean
- [U-Boot] [PATCH v5 4/4] test: dm: add a test for MDIO MUX DM uclass
Alex Marginean
- [U-Boot] [PATCH v5 2/4] doc: bindings: Add description for MDIO MUX dts nodes
Alex Marginean
- [U-Boot] [PATCH v6 1/4] net: add MDIO_MUX DM class
Alex Marginean
- [U-Boot] [PATCH v6 2/4] doc: bindings: Add description for MDIO MUX dts nodes
Alex Marginean
- [U-Boot] [PATCH v6 3/4] test: dm_mdio: add a 2nd register to the emulated PHY
Alex Marginean
- [U-Boot] [PATCH v6 4/4] test: dm: add a test for MDIO MUX DM uclass
Alex Marginean
- [U-Boot] [PATCH 1/2] armv8: ls1028aqds: switch LS1028A QDS board to I2C DM
Alex Marginean
- [U-Boot] [PATCH 2/2] configs: ls1028aqds: enable I2C and GPIO DM
Alex Marginean
- [U-Boot] [PATCH v4 1/4] armv8: ls1028a: The ls1028a platform supports the I2C driver model
Alex Marginean
- [U-Boot] [PATCH v4 2/4] gpio: do not include <asm/arch/gpio.h> on ARCH_LS1028A
Alex Marginean
- [U-Boot] [PATCH v4 3/4] configs: ls1028a: enable DM support for pcf2127 rtc
Alex Marginean
- [U-Boot] [PATCH v4 4/4] armv8: dts: ls1028ardb: Add slave nodes under the i2c0 controller
Alex Marginean
- [U-Boot] [PATCH 1/2] drivers: net: driver for MDIO muxes controlled over I2C
Alex Marginean
- [U-Boot] [PATCH 2/2] doc: bindings: Add binding for register driven MDIO muxes
Alex Marginean
- [U-Boot] [EXT] Re: [PATCH 1/2] armv8: ls1028aqds: switch LS1028A QDS board to I2C DM
Alex Marginean
- [U-Boot] [PATCH 1/4] armv8: ls1028aqds: Remove the definition of CONFIG_SYS_I2C_EARLY_INIT
Alex Marginean
- [U-Boot] [PATCH 2/4] configs: ls1028aqds: Enable DM support for pcf2127 rtc
Alex Marginean
- [U-Boot] [PATCH 3/4] armv8: dts: ls1028aqds: Add pca9547 node under the i2c0 controller
Alex Marginean
- [U-Boot] [PATCH 4/4] armv8: dts: ls1028aqds: Add pcf2127 node under i2c1
Alex Marginean
- [U-Boot] [EXT] Re: [PATCH 1/2] armv8: ls1028aqds: switch LS1028A QDS board to I2C DM
Alex Marginean
- [U-Boot] [EXT] Re: [PATCH 2/4] configs: ls1028aqds: Enable DM support for pcf2127 rtc
Alex Marginean
- [U-Boot] [PATCH] drivers: net: fsl_enetc: add support for SGMII 2500
Alex Marginean
- [U-Boot] [PATCH 1/2] drivers: net: driver for MDIO muxes controlled over I2C
Alex Marginean
- [U-Boot] [PATCH v2 1/2] drivers: net: driver for MDIO muxes controlled over I2C
Alex Marginean
- [U-Boot] [PATCH v2 2/2] doc: bindings: Add binding for register driven MDIO muxes
Alex Marginean
- [U-Boot] [PATCH 1/2] drivers: net: driver for MDIO muxes controlled over I2C
Alex Marginean
- [U-Boot] [PATCH 0/4] Marvell MDIO driver and new MDIO name property
Alex Marginean
- [U-Boot] [PATCH 1/4] net: mdio-uclass: name MDIO according to device-name property if preset
Alex Marginean
- [U-Boot] [PATCH 2/4] doc: bindings: add mdio.txt describing generic MDIO properties
Alex Marginean
- [U-Boot] [PATCH 3/4] drivers: net: add marvell MDIO driver
Alex Marginean
- [U-Boot] [PATCH 4/4] arm: dts: Set custom names for cp110 master/slave MDIO buses
Alex Marginean
- [U-Boot] [PATCH 0/4] Marvell MDIO driver and new MDIO name property
Alex Marginean
- [U-Boot] [PATCH 1/4] net: mdio-uclass: name MDIO according to device-name property if preset
Alex Marginean
- [U-Boot] [PATCH 4/4] arm: dts: Set custom names for cp110 master/slave MDIO buses
Alex Marginean
- [U-Boot] [PATCH] drivers: net: fsl_enetc: add support for SGMII 2500
Alex Marginean
- [U-Boot] [PATCH v2 0/4] Marvell MDIO driver and new MDIO name property
Alex Marginean
- [U-Boot] [PATCH v2 1/4] net: mdio-uclass: name MDIO according to device-name property if preset
Alex Marginean
- [U-Boot] [PATCH v2 2/4] doc: bindings: add mdio.txt describing generic MDIO properties
Alex Marginean
- [U-Boot] [PATCH v2 3/4] drivers: net: add marvell MDIO driver
Alex Marginean
- [U-Boot] [PATCH v2 4/4] arm: dts: Set custom names for cp110 master/slave MDIO buses
Alex Marginean
- [U-Boot] [EXT] [PATCH v2 2/4] doc: bindings: add mdio.txt describing generic MDIO properties
Alex Marginean
- [U-Boot] [PATCH 1/2] drivers: net: driver for MDIO muxes controlled over I2C
Alexandru Marginean
- [U-Boot] [PATCH] video: backlight: fix pwm invertation
Stefan Mavrodiev
- [U-Boot] [PATCH] video: backlight: fix pwm invertation
Stefan Mavrodiev
- [U-Boot] [PATCH] video: backlight: fix pwm invertation
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] sunxi: Fix pll1 clock calculation
Stefan Mavrodiev
- [U-Boot] U-Boot/EBBR plugfest at ELC-EU?
Steve McIntyre
- [U-Boot] [PATCH 1/6 v3] include: configs: ls1028a: set SYS_RX_ETH_BUFFER to 8
Bin Meng
- [U-Boot] [PATCH 2/6 v3] drivers: net: add NXP ENETC ethernet driver
Bin Meng
- [U-Boot] [PATCH 3/6 v3] drivers: net: add NXP ENETC MDIO driver
Bin Meng
- [U-Boot] [PATCH 4/6 v3] drivers: net: apply serdes configuration for ENETC Ethernet interfaces
Bin Meng
- [U-Boot] [PATCH 5/6 v3] arm: dts: ls1028a updates for network interfaces
Bin Meng
- [U-Boot] [PATCH 6/6 v3] configs: ls1028a: enable networking options in rds, qds defconfig
Bin Meng
- [U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Bin Meng
- [U-Boot] [PATCH v2 0/8] x86: Add basic Slim Bootloader payload support
Bin Meng
- [U-Boot] [PATCH v2 1/8] x86: Add new slimbootloader CPU type
Bin Meng
- [U-Boot] [PATCH v2 2/8] x86: slimbootloader: Add a function to access HOB
Bin Meng
- [U-Boot] [PATCH v2 3/8] x86: slimbootloader: Add memory configuration
Bin Meng
- [U-Boot] [PATCH v2 4/8] x86: slimbootloader: Add serial driver
Bin Meng
- [U-Boot] [PATCH v2 7/8] board: Add new slimbootloader board
Bin Meng
- [U-Boot] [PATCH v2 8/8] x86: Skip setting up MTRRs in slimbootloader
Bin Meng
- [U-Boot] [PATCH 6/8] usb: add usb_submit_int_msg_nonblock
Bin Meng
- [U-Boot] [PATCH v2] qemu-x86: Use config_distro_bootcmd
Bin Meng
- [U-Boot] [PATCH 6/8] usb: add usb_submit_int_msg_nonblock
Bin Meng
- [U-Boot] [PATCH 6/8] usb: add usb_submit_int_msg_nonblock
Bin Meng
- [U-Boot] [PATCH 6/8] usb: add usb_submit_int_msg_nonblock
Bin Meng
- [U-Boot] [PATCH 1/6 v3] include: configs: ls1028a: set SYS_RX_ETH_BUFFER to 8
Bin Meng
- [U-Boot] [PATCH v2 3/9] usb_kdb: only process events succesfully received
Bin Meng
- [U-Boot] [PATCH v2 5/9] usb: storage: submit_int_msg -> usb_int_msg
Bin Meng
- [U-Boot] [PATCH] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Bin Meng
- [U-Boot] [PATCH 1/2] qemu-riscv: enable VIRTIO_PCI
Bin Meng
- [U-Boot] [PATCH 2/2] distro_bootcmd: refactor virtio to support PCI block devices
Bin Meng
- [U-Boot] [PATCH v2 5/9] usb: storage: submit_int_msg -> usb_int_msg
Bin Meng
- [U-Boot] [PATCH v2 1/5] spi: Add SiFive SPI driver
Bin Meng
- [U-Boot] [PATCH v2 2/5] mmc: skip select_mode_and_width for MMC SPI host
Bin Meng
- [U-Boot] [PATCH v2 3/5] mmc: mmc_spi: Re-write driver using DM framework
Bin Meng
- [U-Boot] [PATCH v2 4/5] riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
Bin Meng
- [U-Boot] [PATCH v2 5/5] doc: sifive-fu540: Update README for SiFive SPI and MMC SPI drivers
Bin Meng
- [U-Boot] [PATCH v2 4/5] riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
Bin Meng
- [U-Boot] [PATCH v2] drivers: net: phy: Ignore PHY ID 0 during PHY probing
Bin Meng
- [U-Boot] [PATCH v3 2/7] usb: usb_submit_int_msg -> usb_int_msg
Bin Meng
- [U-Boot] [PATCH v3 3/7] usb: storage: submit_int_msg -> usb_int_msg
Bin Meng
- [U-Boot] [PATCH 1/4] dm: timer: Skip device that does not have a valid ofnode in pre_probe()
Bin Meng
- [U-Boot] [PATCH 2/4] dm: core: Call clk_set_defaults() during probe() only for a valid ofnode
Bin Meng
- [U-Boot] [PATCH 3/4] dm: core: Set correct "status" value for a node
Bin Meng
- [U-Boot] [PATCH 4/4] dm: Fix parameter description of dev_read_name()
Bin Meng
- [U-Boot] [PATCH v3 4/6] cmd: Remove mmc_spi command
Bin Meng
- [U-Boot] [PATCH v3 5/6] riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
Bin Meng
- [U-Boot] [PATCH 1/4 v3] net: add MDIO_MUX DM class
Bin Meng
- [U-Boot] [PATCH 2/4 v3] doc: bindings: Add description for MDIO MUX dts nodes
Bin Meng
- [U-Boot] [PATCH 3/4 v3] test: dm_mdio: add a 2nd register to the emulated PHY
Bin Meng
- [U-Boot] [PATCH 4/4 v3] test: dm: add a test for MDIO MUX DM uclass
Bin Meng
- [U-Boot] [PATCH v2 7/8] board: Add new slimbootloader board
Bin Meng
- [U-Boot] Boot Linux using EFI environment from u-boot
Bin Meng
- [U-Boot] [PATCH] board/fsl/lx2160ardb: enable flexcan
Bin Meng
- [U-Boot] [PATCH v2 1/7] dm: cache: Add enable and disable ops for cache uclass
Bin Meng
- [U-Boot] [PATCH v2 2/7] dm: cache: add v5l2 cache controller driver
Bin Meng
- [U-Boot] [PATCH v2 3/7] riscv: ae350: use the v5l2 driver to configure the cache
Bin Meng
- [U-Boot] [PATCH v2 4/7] riscv: ax25: add imply v5l2 cache controller
Bin Meng
- [U-Boot] [PATCH] serial_lpuart: Fix config check issue when using clk driver in SPL
Bin Meng
- [U-Boot] [PATCH] mmc: fsl_esdhc_imx: fix config check issue when building in SPL
Bin Meng
- [U-Boot] [PATCH v2 5/7] riscv: cache: Flush L2 cache before jump to linux
Bin Meng
- [U-Boot] [PATCH v2 6/7] riscv: dts: move out AE350 L2 node from cpus node
Bin Meng
- [U-Boot] [u-boot][xhci] Dealing with XHCI controllers with spurious success
Bin Meng
- [U-Boot] [PATCH v2 7/7] riscv: ax25: use CCTL to flush d-cache
Bin Meng
- [U-Boot] [PATCH 1/2] riscv: Sync csr.h with Linux kernel v5.2
Bin Meng
- [U-Boot] [PATCH 2/2] riscv: Access CSRs using CSR numbers
Bin Meng
- [U-Boot] [PATCH v3 3/6] mmc: mmc_spi: Re-write driver using DM framework
Bin Meng
- [U-Boot] [PATCH v3 3/6] mmc: mmc_spi: Re-write driver using DM framework
Bin Meng
- [U-Boot] [PATCH 1/1] board: Arcturus: ucp1020: Removing obsoleted stuff
Bin Meng
- [U-Boot] [PATCH v4 2/4] doc: bindings: Add description for MDIO MUX dts nodes
Bin Meng
- [U-Boot] [PATCH v4 4/4] test: dm: add a test for MDIO MUX DM uclass
Bin Meng
- [U-Boot] [PATCH] net: add comments to phy APIs
Bin Meng
- [U-Boot] [PATCH v2] x86: edison: Enable SD slot
Bin Meng
- [U-Boot] [PATCH v2] x86: edison: Enable SD slot
Bin Meng
- [U-Boot] [PATCH v5 2/4] doc: bindings: Add description for MDIO MUX dts nodes
Bin Meng
- [U-Boot] [PATCH 1/2] armv8: ls1028aqds: switch LS1028A QDS board to I2C DM
Bin Meng
- [U-Boot] [PATCH 2/2] configs: ls1028aqds: enable I2C and GPIO DM
Bin Meng
- [U-Boot] [PATCH 1/2] drivers: net: driver for MDIO muxes controlled over I2C
Bin Meng
- [U-Boot] [PATCH 1/8] net: tsec: Refactor the readout of the tbi-handle property
Bin Meng
- [U-Boot] [PATCH 2/8] net: tsec: Fix offset of MDIO registers for DM_ETH
Bin Meng
- [U-Boot] [PATCH 3/8] net: tsec: Reverse Christmas tree notation
Bin Meng
- [U-Boot] [PATCH 4/8] net: tsec: Make errors visible
Bin Meng
- [U-Boot] [PATCH 5/8] net: tsec: Common handling of MAC station address for DM_ETH
Bin Meng
- [U-Boot] [PATCH 7/8] configs: ls1021atwr: Fix distro_bootcmd for QSPI boot
Bin Meng
- [U-Boot] [PATCH 8/8] Add support for the NXP LS1021A-TSN board
Bin Meng
- [U-Boot] [PATCH 2/8] net: tsec: Fix offset of MDIO registers for DM_ETH
Bin Meng
- [U-Boot] [PATCH 6/8] arm: ls1021atwr: Convert to use driver model TSEC driver
Bin Meng
- [U-Boot] [PATCH v2 2/9] net: tsec: Fix offset of MDIO registers for DM_ETH
Bin Meng
- [U-Boot] [PATCH v2 6/9] net: tsec: Change compatible strings to match Linux
Bin Meng
- [U-Boot] [PATCH v2 9/9] Add support for the NXP LS1021A-TSN board
Bin Meng
- [U-Boot] [PATCH 1/1] efi_loader: allow adding mapped memory at 0x00000000
Bin Meng
- [U-Boot] [PATCH 1/1] efi_loader: allow adding mapped memory at 0x00000000
Bin Meng
- [U-Boot] [PATCH v3 1/8] x86: Add new slimbootloader CPU type
Bin Meng
- [U-Boot] [PATCH v3 2/8] x86: Add a common hob library
Bin Meng
- [U-Boot] [PATCH v3 3/8] x86: slimbootloader: Add memory configuration
Bin Meng
- [U-Boot] [PATCH v3 4/8] x86: slimbootloader: Add serial driver
Bin Meng
- [U-Boot] [PATCH v3 5/8] x86: slimbootloader: Set TSC information for timer driver
Bin Meng
- [U-Boot] [PATCH v3 6/8] x86: slimbootloader: Add a slimbootloader device tree
Bin Meng
- [U-Boot] [PATCH v3 7/8] board: intel: Add new slimbootloader board
Bin Meng
- [U-Boot] [PATCH] travis.yml: change Ubuntu version to xenial
Bin Meng
- [U-Boot] [PATCH 6/8] arm: ls1021atwr: Convert to use driver model TSEC driver
Bin Meng
- [U-Boot] [PATCH 8/8] Add support for the NXP LS1021A-TSN board
Bin Meng
- [U-Boot] [PATCH v4 1/8] x86: Add new slimbootloader CPU type
Bin Meng
- [U-Boot] [PATCH v4 7/8] board: intel: Add new slimbootloader board
Bin Meng
- [U-Boot] [PATCH v4 0/8] x86: Add basic Slim Bootloader payload support
Bin Meng
- [U-Boot] [PATCH 8/8] Add support for the NXP LS1021A-TSN board
Bin Meng
- [U-Boot] [PATCH 2/8] net: tsec: Fix offset of MDIO registers for DM_ETH
Bin Meng
- [U-Boot] [PATCH 1/2] drivers: net: driver for MDIO muxes controlled over I2C
Bin Meng
- [U-Boot] [PATCH 2/8] net: tsec: Fix offset of MDIO registers for DM_ETH
Bin Meng
- [U-Boot] [PATCH 1/2] doc: Add .gitignore for the Sphinx build output directory
Bin Meng
- [U-Boot] [PATCH 2/2] doc: Add the U-Boot logo to the html doc
Bin Meng
- [U-Boot] [RFC PATCH 0/9] Initial layout for Sphinx HTML docs
Bin Meng
- [U-Boot] [RFC PATCH 1/9] doc: Move existing rst files into api sub-directory
Bin Meng
- [U-Boot] [RFC PATCH 2/9] doc: Add top-level description about U-Boot documentation
Bin Meng
- [U-Boot] [RFC PATCH 3/9] doc: Add driver-model to Sphinx TOC tree
Bin Meng
- [U-Boot] [RFC PATCH 4/9] doc: driver-model: Convert README.txt to reST
Bin Meng
- [U-Boot] [RFC PATCH 5/9] doc: driver-model: Convert MIGRATION.txt to reST
Bin Meng
- [U-Boot] [RFC PATCH 6/9] doc: Add architecture specific info to Sphinx TOC tree
Bin Meng
- [U-Boot] [RFC PATCH 7/9] doc: arch: Convert README.mips to reST
Bin Meng
- [U-Boot] [RFC PATCH 8/9] doc: Add board to Sphinx TOC tree
Bin Meng
- [U-Boot] [RFC PATCH 9/9] doc: board: Add Intel Crown Bay board doc
Bin Meng
- [U-Boot] [RFC PATCH 1/9] doc: Move existing rst files into api sub-directory
Bin Meng
- [U-Boot] [PATCH 1/1] travis-ci: qemu-system-riscv64: Parameter 'id' is missing
Bin Meng
- [U-Boot] [PATCH 1/1] efi_loader: add more sources to Sphinx documentation
Bin Meng
- [U-Boot] [RFC PATCH 9/9] doc: board: Add Intel Crown Bay board doc
Bin Meng
- [U-Boot] [PATCH v3] qemu-x86: Use config_distro_bootcmd
Bin Meng
- [U-Boot] [RFC PATCH 4/9] doc: driver-model: Convert README.txt to reST
Bin Meng
- [U-Boot] [PATCH 1/2] riscv: Sync csr.h with Linux kernel v5.2
Bin Meng
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Bin Meng
- [U-Boot] [PATCH 01/50] doc: Move existing rst files into api sub-directory
Bin Meng
- [U-Boot] [PATCH 02/50] doc: Add top-level description about U-Boot documentation
Bin Meng
- [U-Boot] [PATCH 03/50] doc: Add driver-model to Sphinx TOC tree
Bin Meng
- [U-Boot] [PATCH 04/50] doc: driver-model: Convert README.txt to reST
Bin Meng
- [U-Boot] [PATCH 05/50] doc: driver-model: Convert MIGRATION.txt to reST
Bin Meng
- [U-Boot] [PATCH 06/50] doc: driver-model: Convert fdt-fixup.txt to reST
Bin Meng
- [U-Boot] [PATCH 07/50] doc: driver-model: Convert fs_firmware_loader.txt to reST
Bin Meng
- [U-Boot] [PATCH 08/50] doc: driver-model: Convert i2c-howto.txt to reST
Bin Meng
- [U-Boot] [PATCH 09/50] doc: driver-model: Convert livetree.txt to reST
Bin Meng
- [U-Boot] [PATCH 10/50] doc: driver-model: Convert of-plat.txt to reST
Bin Meng
- [U-Boot] [PATCH 11/50] doc: driver-model: Convert pci-info.txt to reST
Bin Meng
- [U-Boot] [PATCH 12/50] doc: driver-model: Convert pmic-framework.txt to reST
Bin Meng
- [U-Boot] [PATCH 13/50] doc: driver-model: Convert remoteproc-framework.txt to reST
Bin Meng
- [U-Boot] [PATCH 14/50] doc: driver-model: Convert serial-howto.txt to reST
Bin Meng
- [U-Boot] [PATCH 15/50] doc: driver-model: Convert spi-howto.txt to reST
Bin Meng
- [U-Boot] [PATCH 16/50] doc: driver-model: Convert usb-info.txt to reST
Bin Meng
- [U-Boot] [PATCH 17/50] doc: Add architecture specific info to Sphinx TOC tree
Bin Meng
- [U-Boot] [PATCH 18/50] doc: arch: Convert README.mips to reST
Bin Meng
- [U-Boot] [PATCH 19/50] doc: Add board specific info to Sphinx TOC tree
Bin Meng
- [U-Boot] [PATCH 20/50] doc: board: Add Intel Crown Bay board doc
Bin Meng
- [U-Boot] [PATCH 21/50] doc: board: Add Intel Bay Trail based board docs
Bin Meng
- [U-Boot] [PATCH 22/50] doc: board: Add Intel Cherry Hill board doc
Bin Meng
- [U-Boot] [PATCH 23/50] doc: board: Add Intel Cougar Canyon 2 board doc
Bin Meng
- [U-Boot] [PATCH 24/50] doc: board: Add Intel Edison board doc
Bin Meng
- [U-Boot] [PATCH 25/50] doc: board: Add Intel Galileo board doc
Bin Meng
- [U-Boot] [PATCH 26/50] doc: board: Add Google Chromebook Link board doc
Bin Meng
- [U-Boot] [PATCH 27/50] doc: board: Add Google Chromebook Samus board doc
Bin Meng
- [U-Boot] [PATCH 28/50] doc: board: Add coreboot board doc
Bin Meng
- [U-Boot] [PATCH 29/50] doc: board: Add QEMU x86 board doc
Bin Meng
- [U-Boot] [PATCH 30/50] doc: board: Convert README.qemu-arm to reST
Bin Meng
- [U-Boot] [PATCH 31/50] doc: board: Convert README.qemu-riscv to reST
Bin Meng
- [U-Boot] [PATCH 32/50] doc: board: Convert README.qemu-mips to reST
Bin Meng
- [U-Boot] [PATCH 33/50] doc: board: Add AndesTech ax25-ae350 board doc
Bin Meng
- [U-Boot] [PATCH 34/50] doc: board: Convert README.ag101p to reST
Bin Meng
- [U-Boot] [PATCH 35/50] doc: board: Convert README.sifive-fu540 to reST
Bin Meng
- [U-Boot] [PATCH 36/50] doc: board: Convert README.sh7752evb to reST
Bin Meng
- [U-Boot] [PATCH 37/50] doc: board: Convert README.sh7753evb to reST
Bin Meng
- [U-Boot] [PATCH 38/50] doc: board: Convert README.at91 to reST
Bin Meng
- [U-Boot] [PATCH 39/50] doc: board: Convert README.b4860qds to reST
Bin Meng
- [U-Boot] [PATCH 40/50] doc: board: Convert README.zynq to reST
Bin Meng
- [U-Boot] [PATCH 41/50] doc: arch: Convert README.x86 to reST
Bin Meng
- [U-Boot] [PATCH 42/50] doc: arch: Convert README.arm64 to reST
Bin Meng
- [U-Boot] [PATCH 43/50] doc: arch: Convert README.NDS32 to reST
Bin Meng
- [U-Boot] [PATCH 44/50] doc: arch: Convert README.nios2 to reST
Bin Meng
- [U-Boot] [PATCH 45/50] doc: arch: Convert README.ARC to reST
Bin Meng
- [U-Boot] [PATCH 46/50] doc: arch: Convert README.m68k to reST
Bin Meng
- [U-Boot] [PATCH 47/50] doc: arch: Convert README.sh to reST
Bin Meng
- [U-Boot] [PATCH 48/50] doc: arch: Convert README.sandbox to reST
Bin Meng
- [U-Boot] [PATCH 49/50] doc: arch: Convert README.xtensa to reST
Bin Meng
- [U-Boot] [PATCH 50/50] doc: Remove README.blackfin
Bin Meng
- [U-Boot] [PATCH 2/2] riscv: Access CSRs using CSR numbers
Bin Meng
- [U-Boot] [PATCH v2 1/4] x86: acpi: Add CSRT description
Bin Meng
- [U-Boot] [PATCH v2 2/4] x86: acpi: Introduce a stub to generate CSRT
Bin Meng
- [U-Boot] [PATCH v2 3/4] x86: acpi: Enable ACPI companion for Intel iDMA 32-bit
Bin Meng
- [U-Boot] [PATCH v2 4/4] x86: tangier: Populate CSRT for shared DMA controller
Bin Meng
- [U-Boot] [PATCH v3] qemu-x86: Use config_distro_bootcmd
Bin Meng
- [U-Boot] [PATCH v2 1/4] x86: acpi: Add CSRT description
Bin Meng
- [U-Boot] [PATCH v2 2/4] x86: acpi: Introduce a stub to generate CSRT
Bin Meng
- [U-Boot] [PATCH v2 3/4] x86: acpi: Enable ACPI companion for Intel iDMA 32-bit
Bin Meng
- [U-Boot] [PATCH v2 4/4] x86: tangier: Populate CSRT for shared DMA controller
Bin Meng
- [U-Boot] U-Boot build error when switch different SoC without clean
Bin Meng
- [U-Boot] [PATCH 1/1] efi_loader: always rebuild efi_crt0.o
Bin Meng
- [U-Boot] [PATCH v5 0/8] x86: Add basic Slim Bootloader payload support
Bin Meng
- [U-Boot] [PATCH v10 3/4] riscv: sifive: fu540: Sync-up config header with RISC-V QEMU support
Bin Meng
- [U-Boot] [PATCH v10 4/4] doc: sifive-fu540: Update README to explicitly load DTB for Linux
Bin Meng
- [U-Boot] [PATCH v5 1/8] x86: Add new slimbootloader CPU type
Bin Meng
- [U-Boot] [PATCH v5 3/8] x86: slimbootloader: Add memory configuration
Bin Meng
- [U-Boot] [PATCH v5 5/8] x86: slimbootloader: Set TSC information for timer driver
Bin Meng
- [U-Boot] [PATCH v5 7/8] board: intel: Add new slimbootloader board
Bin Meng
- [U-Boot] [PATCH 1/2] doc: Add .gitignore for the Sphinx build output directory
Bin Meng
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Bin Meng
- [U-Boot] [PATCH v3 2/9] net: tsec: Fix offset of MDIO registers for DM_ETH
Bin Meng
- [U-Boot] [PATCH v3 9/9] Add support for the NXP LS1021A-TSN board
Bin Meng
- [U-Boot] [PATCH v2 1/2] drivers: net: driver for MDIO muxes controlled over I2C
Bin Meng
- [U-Boot] [PATCH v2 2/2] doc: bindings: Add binding for register driven MDIO muxes
Bin Meng
- [U-Boot] [PATCH 1/4] net: mdio-uclass: name MDIO according to device-name property if preset
Bin Meng
- [U-Boot] [PATCH 2/4] doc: bindings: add mdio.txt describing generic MDIO properties
Bin Meng
- [U-Boot] [PATCH 1/4] net: mdio-uclass: name MDIO according to device-name property if preset
Bin Meng
- [U-Boot] [RFC PATCH 00/11] SPL support for RISC-V
Bin Meng
- [U-Boot] [RFC PATCH 01/11] fdtdec: make CONFIG_OF_PRIOR_STAGE available in SPL
Bin Meng
- [U-Boot] [RFC PATCH 02/11] Makefile: support building SPL FIT images without device trees
Bin Meng
- [U-Boot] [RFC PATCH 03/11] spl: fit: use U-Boot device tree when FIT image has no device tree
Bin Meng
- [U-Boot] [RFC PATCH 04/11] riscv: add run mode configuration for SPL
Bin Meng
- [U-Boot] [RFC PATCH 05/11] spl: support booting via RISC-V OpenSBI
Bin Meng
- [U-Boot] [RFC PATCH 06/11] riscv: add SPL support
Bin Meng
- [U-Boot] [RFC PATCH 07/11] riscv: support SPL stack and global data relocation
Bin Meng
- [U-Boot] [RFC PATCH 08/11] riscv: add a generic FIT generator script
Bin Meng
- [U-Boot] [RFC PATCH 09/11] riscv: set default FIT generator script and build target for SPL builds
Bin Meng
- [U-Boot] [RFC PATCH 10/11] riscv: qemu: add SPL configuration
Bin Meng
- [U-Boot] [RFC PATCH 11/11] doc: update QEMU RISC-V documentation
Bin Meng
- [U-Boot] [PATCH 1/3] dm: pcie_fsl: Fix workaround of P4080 erratum A003
Bin Meng
- [U-Boot] [PATCH v5 1/8] x86: Add new slimbootloader CPU type
Bin Meng
- [U-Boot] [RFC PATCH 00/11] SPL support for RISC-V
Bin Meng
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Bin Meng
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Bin Meng
- [U-Boot] [PATCH v5 7/8] board: intel: Add new slimbootloader board
Bin Meng
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Bin Meng
- [U-Boot] [RFC PATCH 00/11] SPL support for RISC-V
Bin Meng
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Bin Meng
- [U-Boot] [v3] armv8: ls1028ardb: enable DisplayPort Power support
Bin Meng
- [U-Boot] [PATCH v2] x86: Avoid writing temporary asl files into the source tree
Bin Meng
- [U-Boot] [PATCH v5 7/8] board: intel: Add new slimbootloader board
Bin Meng
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Bin Meng
- [U-Boot] [PATCH] doc: board: Add missing board index.rst files
Bin Meng
- [U-Boot] [PATCH 1/1] doc: integrate UEFI documentation into Sphinx toctree
Bin Meng
- [U-Boot] [PATCH v6 7/8] board: intel: Add new slimbootloader board
Bin Meng
- [U-Boot] [PATCH 1/1] Dockerfile: add python3-sphinx
Bin Meng
- [U-Boot] [PATCH v2 1/1] doc: integrate UEFI documentation into Sphinx toctree
Bin Meng
- [U-Boot] [PATCH 1/1] Dockerfile: add python3-sphinx
Bin Meng
- [U-Boot] [PATCH 1/1] Dockerfile: build GRUB UEFI targets
Bin Meng
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Bin Meng
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Bin Meng
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Bin Meng
- [U-Boot] [PATCH v2] x86: ich-spi: Convert driver to spi-mem ops
Bin Meng
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Bin Meng
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Bin Meng
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Bin Meng
- [U-Boot] [PATCH] x86: qemu: Fix non-working ramboot and nfsboot environment variables
Bin Meng
- [U-Boot] [PATCH v3] x86: Avoid writing temporary asl files into the source tree
Bin Meng
- [U-Boot] [PATCH v3] x86: Avoid writing temporary asl files into the source tree
Bin Meng
- [U-Boot] [PATCH v2] x86: ich-spi: Convert driver to spi-mem ops
Bin Meng
- [U-Boot] [PATCH] sifive: riscv: update Hifive Unleashed configuration infrastructure
Bin Meng
- [U-Boot] x86 FSP 2
Bin Meng
- [U-Boot] [PATCH] remoteproc: Fix potential build issues with SPL remoteproc
Nishanth Menon
- [U-Boot] Antwort: [PATCH v2] x86: ich-spi: Convert driver to spi-mem ops
Bernhard Messerklinger
- [U-Boot] [PATCH v3] x86: ich-spi: Convert driver to spi-mem ops
Bernhard Messerklinger
- [U-Boot] [PATCH 1/3] ARM: dts: add support for Odroid-N2
Anand Moon
- [U-Boot] [PATCH 3/3] board: amlogic: add support for Odroid-N2
Anand Moon
- [U-Boot] make all fails at bad mtune value
Quiet Mouse
- [U-Boot] [PATCH] rockchip: make_fit_atf.py: fix loadables property set error
Christoph Müllner
- [U-Boot] [PATCH] rockchip: make_fit_atf.py: fix loadables property set error
Christoph Müllner
- [U-Boot] [PATCH] rockchip: make_fit_atf.py: fix loadables property set error【请注意,邮件由mark.kettenis at sibelius.xs4all.nl代发】
Christoph Müllner
- [U-Boot] [PATCH 1/2] i.MX6: nand: extend nandbcb command for imx6UL(L)
Parthiban Nallathambi
- [U-Boot] [PATCH 2/2] imx: pcl063: add nand boot support
Parthiban Nallathambi
- [U-Boot] [PATCH] rockchip: rk3399: Add Khadas Edge board support
Nick
- [U-Boot] [PATCH] rpi3: Enable verified boot from FIT image
Jun Nie
- [U-Boot] [PATCH 0/3] Support distro boot in pico-imx7d BL33 case
Jun Nie
- [U-Boot] [PATCH 1/3] pico-imx7d: add config to enable CAAM
Jun Nie
- [U-Boot] [PATCH 2/3] pico-imx7d: Support distro boot for FIT image case
Jun Nie
- [U-Boot] [PATCH 3/3] pico-imx7d: polish uart clock id definition
Jun Nie
- [U-Boot] [PATCH 0/3] Support distro boot in pico-imx7d BL33 case
Jun Nie
- [U-Boot] [PATCH] rpi3: Enable verified boot from FIT image
Jun Nie
- [U-Boot] [PATCH] rpi3: Enable verified boot from FIT image
Jun Nie
- [U-Boot] [PATCH] clk: initialize clk->data when using default xlate
Sekhar Nori
- [U-Boot] [PATCH v2 1/7] clk: add support for clk_is_match()
Sekhar Nori
- [U-Boot] [PATCH 0/2] efi_loader: Fix inconsistencies in efi_add_memory_map usage
Bryan O'Donoghue
- [U-Boot] [PATCH 1/2] efi_loader: Check the result of efi_add_memory_map against input addr
Bryan O'Donoghue
- [U-Boot] [PATCH 2/2] efi_loader: Return non-zero for error in efi_add_memory_map()
Bryan O'Donoghue
- [U-Boot] [PATCH 0/2] efi_loader: Fix inconsistencies in efi_add_memory_map usage
Bryan O'Donoghue
- [U-Boot] [PATCH v2 0/7] efi_loader: Fix inconsistencies in efi_add_memory_map usage
Bryan O'Donoghue
- [U-Boot] [PATCH v2 1/7] efi_loader: Change return type of efi_add_memory_map()
Bryan O'Donoghue
- [U-Boot] [PATCH v2 2/7] efi_loader: Change efi_add_memory_map() to return EFI_SUCCESS
Bryan O'Donoghue
- [U-Boot] [PATCH v2 3/7] efi_loader: Return non-zero for error in efi_add_memory_map()
Bryan O'Donoghue
- [U-Boot] [PATCH v2 4/7] efi_loader: Update efi_allocate_pages() to new efi_add_memory_map()
Bryan O'Donoghue
- [U-Boot] [PATCH v2 5/7] efi_loader: Update efi_free_pages() to new efi_add_memory_map()
Bryan O'Donoghue
- [U-Boot] [PATCH v2 6/7] efi_loader: Treat the result of efi_add_memory_map as efi_status_t
Bryan O'Donoghue
- [U-Boot] [PATCH v2 7/7] efi_loader: Capture efi_add_memory_map() result efi_add_runtime_mmio()
Bryan O'Donoghue
- [U-Boot] [PATCH 1/1] efi_loader: allow adding mapped memory at 0x00000000
Bryan O'Donoghue
- [U-Boot] [PATCH v3 0/8] efi_loader: Fix inconsistencies in efi_add_memory_map usage
Bryan O'Donoghue
- [U-Boot] [PATCH v3 1/8] efi_loader: Change return type of efi_add_memory_map()
Bryan O'Donoghue
- [U-Boot] [PATCH v3 2/8] efi_loader: Add a method description to efi_add_memory_map
Bryan O'Donoghue
- [U-Boot] [PATCH v3 3/8] efi_loader: Change efi_add_memory_map() to return EFI_SUCCESS
Bryan O'Donoghue
- [U-Boot] [PATCH v3 4/8] efi_loader: Return non-zero for error in efi_add_memory_map()
Bryan O'Donoghue
- [U-Boot] [PATCH v3 5/8] efi_loader: Update efi_allocate_pages() to new efi_add_memory_map()
Bryan O'Donoghue
- [U-Boot] [PATCH v3 6/8] efi_loader: Update efi_free_pages() to new efi_add_memory_map()
Bryan O'Donoghue
- [U-Boot] [PATCH v3 7/8] efi_loader: Treat the result of efi_add_memory_map as efi_status_t
Bryan O'Donoghue
- [U-Boot] [PATCH v3 8/8] efi_loader: Capture efi_add_memory_map() result efi_add_runtime_mmio()
Bryan O'Donoghue
- [U-Boot] [PATCH v3 6/8] efi_loader: Update efi_free_pages() to new efi_add_memory_map()
Bryan O'Donoghue
- [U-Boot] [PATCH v4 0/1] efi_loader: Fix inconsistencies in efi_add_memory_map usage
Bryan O'Donoghue
- [U-Boot] [PATCH v4 1/1] efi_loader: Change return type of efi_add_memory_map()
Bryan O'Donoghue
- [U-Boot] nxp: HABv4 secure boot on iMX7 NAND broken
Bryan O'Donoghue
- [U-Boot] nxp: HABv4 secure boot on iMX7 NAND broken
Bryan O'Donoghue
- [U-Boot] nxp: HABv4 secure boot on iMX7 NAND broken
Bryan O'Donoghue
- [U-Boot] nxp: HABv4 secure boot on iMX7 NAND broken
Bryan O'Donoghue
- [U-Boot] [PATCH 2/3] pico-imx7d: Support distro boot for FIT image case
Joris OFFOUGA
- [U-Boot] [PATCH 6/8] arm: ls1021atwr: Convert to use driver model TSEC driver
Vladimir Oltean
- [U-Boot] [PATCH 2/8] net: tsec: Fix offset of MDIO registers for DM_ETH
Vladimir Oltean
- [U-Boot] [PATCH] cmd: mdio: prevent data abort when no mdio bus is found
Vladimir Oltean
- [U-Boot] [PATCH v2 0/9] NXP LS1021A-TSN Board
Vladimir Oltean
- [U-Boot] [PATCH v2 1/9] net: tsec: Refactor the readout of the tbi-handle property
Vladimir Oltean
- [U-Boot] [PATCH v2 2/9] net: tsec: Fix offset of MDIO registers for DM_ETH
Vladimir Oltean
- [U-Boot] [PATCH v2 3/9] net: tsec: Reverse Christmas tree notation
Vladimir Oltean
- [U-Boot] [PATCH v2 4/9] net: tsec: Make errors visible
Vladimir Oltean
- [U-Boot] [PATCH v2 5/9] net: tsec: Common handling of MAC station address for DM_ETH
Vladimir Oltean
- [U-Boot] [PATCH v2 6/9] net: tsec: Change compatible strings to match Linux
Vladimir Oltean
- [U-Boot] [PATCH v2 7/9] arm: ls1021atwr: Convert to use driver model TSEC driver
Vladimir Oltean
- [U-Boot] [PATCH v2 8/9] configs: ls1021atwr: Fix distro_bootcmd for QSPI boot
Vladimir Oltean
- [U-Boot] [PATCH v2 9/9] Add support for the NXP LS1021A-TSN board
Vladimir Oltean
- [U-Boot] [PATCH 6/8] arm: ls1021atwr: Convert to use driver model TSEC driver
Vladimir Oltean
- [U-Boot] [PATCH 8/8] Add support for the NXP LS1021A-TSN board
Vladimir Oltean
- [U-Boot] [PATCH 8/8] Add support for the NXP LS1021A-TSN board
Vladimir Oltean
- [U-Boot] [PATCH 8/8] Add support for the NXP LS1021A-TSN board
Vladimir Oltean
- [U-Boot] [PATCH 2/8] net: tsec: Fix offset of MDIO registers for DM_ETH
Vladimir Oltean
- [U-Boot] [PATCH 8/8] Add support for the NXP LS1021A-TSN board
Vladimir Oltean
- [U-Boot] [PATCH 2/8] net: tsec: Fix offset of MDIO registers for DM_ETH
Vladimir Oltean
- [U-Boot] [PATCH v3 0/9] NXP LS1021A-TSN Board
Vladimir Oltean
- [U-Boot] [PATCH v3 1/9] net: tsec: Refactor the readout of the tbi-handle property
Vladimir Oltean
- [U-Boot] [PATCH v3 2/9] net: tsec: Fix offset of MDIO registers for DM_ETH
Vladimir Oltean
- [U-Boot] [PATCH v3 3/9] net: tsec: Reverse Christmas tree notation
Vladimir Oltean
- [U-Boot] [PATCH v3 4/9] net: tsec: Make errors visible
Vladimir Oltean
- [U-Boot] [PATCH v3 5/9] net: tsec: Common handling of MAC station address for DM_ETH
Vladimir Oltean
- [U-Boot] [PATCH v3 6/9] net: tsec: Change compatible strings to match Linux
Vladimir Oltean
- [U-Boot] [PATCH v3 7/9] arm: ls1021atwr: Convert to use driver model TSEC driver
Vladimir Oltean
- [U-Boot] [PATCH v3 8/9] configs: ls1021atwr: Fix distro_bootcmd for QSPI boot
Vladimir Oltean
- [U-Boot] [PATCH v3 9/9] Add support for the NXP LS1021A-TSN board
Vladimir Oltean
- [U-Boot] [PATCH v3 0/9] NXP LS1021A-TSN Board
Vladimir Oltean
- [U-Boot] [PATCH v3 0/9] NXP LS1021A-TSN Board
Vladimir Oltean
- [U-Boot] [PATCH v3 0/9] NXP LS1021A-TSN Board
Vladimir Oltean
- [U-Boot] Add support for the NXP LS1021A-TSN board
Vladimir Oltean
- [U-Boot] Pull request: u-boot-net.git master
Vladimir Oltean
- [U-Boot] Upstreaming usb host drivers for iMX8/iMX8M
Igor Opaniuk
- [U-Boot] [PATCH v4 0/6] android: implement A/B boot process
Igor Opaniuk
- [U-Boot] [PATCH v4 1/6] disk: part: Extend API to get partition info
Igor Opaniuk
- [U-Boot] [PATCH v4 2/6] common: Implement A/B metadata
Igor Opaniuk
- [U-Boot] [PATCH v4 3/6] cmd: Add 'ab_select' command
Igor Opaniuk
- [U-Boot] [PATCH v4 4/6] test/py: Add base test case for A/B updates
Igor Opaniuk
- [U-Boot] [PATCH v4 5/6] doc: android: Add simple guide for A/B updates
Igor Opaniuk
- [U-Boot] [PATCH v4 6/6] env: am57xx: Implement A/B boot process
Igor Opaniuk
- [U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode
Igor Opaniuk
- [U-Boot] [PATCH v5 0/6] android: implement A/B boot process
Igor Opaniuk
- [U-Boot] [PATCH v5 1/6] disk: part: Extend API to get partition info
Igor Opaniuk
- [U-Boot] [PATCH v5 2/6] common: Implement A/B metadata
Igor Opaniuk
- [U-Boot] [PATCH v5 3/6] cmd: Add 'ab_select' command
Igor Opaniuk
- [U-Boot] [PATCH v5 4/6] test/py: Add base test case for A/B updates
Igor Opaniuk
- [U-Boot] [PATCH v5 5/6] doc: android: Add simple guide for A/B updates
Igor Opaniuk
- [U-Boot] [PATCH v5 6/6] env: am57xx: Implement A/B boot process
Igor Opaniuk
- [U-Boot] [PATCH 1/5] toradex: configblock: initialize MMC before switching partition
Igor Opaniuk
- [U-Boot] [PATCH 5/5] toradex: configblock: fix long line
Igor Opaniuk
- [U-Boot] [PATCH 2/5] toradex: configblock: generic wi-fi/bt handling
Igor Opaniuk
- [U-Boot] [PATCH 4/5] toradex: configblock: fix apalis imx8 target
Igor Opaniuk
- [U-Boot] [PATCH 3/5] toradex: configblock: fix colibri imx8x target
Igor Opaniuk
- [U-Boot] [PATCH] colibri-imx6ull: fix vidargs
Igor Opaniuk
- [U-Boot] [PATCH v1 3/3] colibri_imx6: configs: remove legacy usbboot command
Igor Opaniuk
- [U-Boot] [PATCH v1 2/3] apalis_imx6: configs: remove legacy usbboot command
Igor Opaniuk
- [U-Boot] [PATCH v1 1/3] apalis-tk1: configs: remove legacy usbboot command
Igor Opaniuk
- [U-Boot] [PATCH v1 0/3] Remove obsolete usbboot wrapper usage
Igor Opaniuk
- [U-Boot] [PATCH 0/6] Enabled DM_VIDEO for Colibri iMX7 NAND/iMX6ULL
Igor Opaniuk
- [U-Boot] [PATCH 1/6] video: mxsfb: fix mxsfb fbdev binding issues
Igor Opaniuk
- [U-Boot] [PATCH 2/6] ARM: dts: colibri_imx7: Fix lcdif node definition
Igor Opaniuk
- [U-Boot] [PATCH 3/6] configs: colibri_imx7: enable DM_VIDEO
Igor Opaniuk
- [U-Boot] [PATCH 4/6] colibri-imx6ull: support building with DM_VIDEO=y
Igor Opaniuk
- [U-Boot] [PATCH 5/6] ARM: dts: colibri-imx6ull: extend lcdif node
Igor Opaniuk
- [U-Boot] [PATCH 6/6] configs: colibri-imx6ull: switch to DM_VIDEO
Igor Opaniuk
- [U-Boot] [PATCH v2 1/1] colibri_imx7: introduce androidboot wrapper
Igor Opaniuk
- [U-Boot] imx7d: CPU core issue in secure mode
Igor Opaniuk
- [U-Boot] [PATCH 0/6] Enabled DM_VIDEO for Colibri iMX7 NAND/iMX6ULL
Igor Opaniuk
- [U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode
Igor Opaniuk
- [U-Boot] [RFC 0/4] Convert fsl_dcu_fb to DM_VIDEO
Igor Opaniuk
- [U-Boot] [RFC 1/4] video: fsl_dcu_fb: refactor init functions
Igor Opaniuk
- [U-Boot] [RFC 2/4] video: fsl_dcu_fb: add DM_VIDEO support
Igor Opaniuk
- [U-Boot] [RFC 3/4] ARM: dts: colibri_vf: Add dcu0 node
Igor Opaniuk
- [U-Boot] [RFC 4/4] colibri_vf: enable DM_VIDEO
Igor Opaniuk
- [U-Boot] [PATCH v5 1/1] cmd: part: Add 'number' sub-command
Igor Opaniuk
- [U-Boot] [PATCH 1/2] env: ti: Increase boot partition
Igor Opaniuk
- [U-Boot] [PATCH 2/2] arm: am57xx: Allow bootm to load larger kernels
Igor Opaniuk
- [U-Boot] [PATCH v5 0/6] android: implement A/B boot process
Igor Opaniuk
- [U-Boot] [PATCH v1 0/2] android: colibri_imx7: reserve DDR memory for Cortex-M4
Igor Opaniuk
- [U-Boot] [PATCH v1 1/2] common: fdt_support: add support for setting usable memory
Igor Opaniuk
- [U-Boot] [PATCH v1 2/2] board: colibri_imx7: reserve DDR memory for Cortex-M4
Igor Opaniuk
- [U-Boot] [PATCH v1 0/2] android: colibri_imx7: reserve DDR memory for Cortex-M4
Igor Opaniuk
- [U-Boot] [PATCH 1/5] doc: Move README.android-fastboot-protocol to doc/android/
Igor Opaniuk
- [U-Boot] [PATCH 2/5] treewide: Fix stale references of Android docs
Igor Opaniuk
- [U-Boot] [PATCH 3/5] cmd: bcb: Fix duplicated handling in two case-branches
Igor Opaniuk
- [U-Boot] [PATCH 4/5] cmd: bcb: Use strcmp() instead of strncmp() for string literals
Igor Opaniuk
- [U-Boot] [PATCH 5/5] cmd: bcb: Apply non-functional refinements
Igor Opaniuk
- [U-Boot] [PATCH v1 0/2] imx6ull: Fix missing initial output from UART
Igor Opaniuk
- [U-Boot] [PATCH v1 1/2] pinctrl: nxp: mx6: DM_FLAG_PRE_RELOC by default
Igor Opaniuk
- [U-Boot] [PATCH v1 2/2] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes
Igor Opaniuk
- [U-Boot] [PATCH v1] imx: add u-boot-nand.imx target
Igor Opaniuk
- [U-Boot] [PATCH v1 2/2] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes
Igor Opaniuk
- [U-Boot] [PATCH v1 1/2] pinctrl: nxp: mx6: DM_FLAG_PRE_RELOC by default
Igor Opaniuk
- [U-Boot] pmic_get() broken after 4213609cc7("drivers: core: use strcmp when find device by name")
Igor Opaniuk
- [U-Boot] [PATCH v1] colibri_imx7: provide proper node name to pmic_get
Igor Opaniuk
- [U-Boot] [PATCH v3 3/4] cmd: bcb: Use strcmp() instead of strncmp() for string literals
Igor Opaniuk
- [U-Boot] [EXT] Re: Upstreaming usb host drivers for iMX8/iMX8M
Igor Opaniuk
- [U-Boot] [PATCH v1] imx: add u-boot-nand.imx target
Igor Opaniuk
- [U-Boot] [EXT] Re: Upstreaming usb host drivers for iMX8/iMX8M
Igor Opaniuk
- [U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode
Igor Opaniuk
- [U-Boot] [PATCH v2] imx: add u-boot-nand.imx target
Igor Opaniuk
- [U-Boot] [PATCH v1 1/2] pinctrl: nxp: mx6: DM_FLAG_PRE_RELOC by default
Igor Opaniuk
- [U-Boot] [PATCH v3] imx: add u-boot-nand.imx target
Igor Opaniuk
- [U-Boot] [PATCH v2 0/3] imx6ull: Fix missing initial output from UART
Igor Opaniuk
- [U-Boot] [PATCH v2 1/3] pinctrl: nxp: DM_FLAG_PRE_RELOC by default
Igor Opaniuk
- [U-Boot] [PATCH v2 2/3] ARM: dts: imx6ull-colibri: change hierarchy of DTS files
Igor Opaniuk
- [U-Boot] [PATCH v2 3/3] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes
Igor Opaniuk
- [U-Boot] [PATCH 0/6] Enabled DM_VIDEO for Colibri iMX7 NAND/iMX6ULL
Igor Opaniuk
- [U-Boot] [PATCH 0/6] Enabled DM_VIDEO for Colibri iMX7 NAND/iMX6ULL
Igor Opaniuk
- [U-Boot] nxp: HABv4 secure boot on iMX7 NAND broken
Igor Opaniuk
- [U-Boot] nxp: HABv4 secure boot on iMX7 NAND broken
Igor Opaniuk
- [U-Boot] nxp: HABv4 secure boot on iMX7 NAND broken
Igor Opaniuk
- [U-Boot] [PATCH v1 0/9] apalis-tk1: fixes/updates for v2019.10
Igor Opaniuk
- [U-Boot] [PATCH v1 1/9] apalis-tk1: do not explicitly release reset_moci#
Igor Opaniuk
- [U-Boot] [PATCH v1 2/9] apalis-tk1: set apalis gpio 8 aka fan_en
Igor Opaniuk
- [U-Boot] [PATCH v1 3/9] apalis-tk1: provide proper USB vendor id
Igor Opaniuk
- [U-Boot] [PATCH v1 4/9] apalis-tk1: enable user debug by default
Igor Opaniuk
- [U-Boot] [PATCH v1 5/9] apalis-tk1: add pcie_aspm=off to defargs
Igor Opaniuk
- [U-Boot] [PATCH v1 6/9] apalis-tk1: switch to zImage
Igor Opaniuk
- [U-Boot] [PATCH v1 7/9] apalis-tk1/t30: colibri_t30: display reset reason
Igor Opaniuk
- [U-Boot] [PATCH v1 8/9] apalis-tk1: remove default vesa vga mode from vidargs
Igor Opaniuk
- [U-Boot] [PATCH v1 9/9] apalis-tk1: remove non-esential power rails on boot
Igor Opaniuk
- [U-Boot] [PATCH 1/6] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Chris Packham
- [U-Boot] [PATCH 0/6] Extend mv88e61xx driver to support 88E6071
Chris Packham
- [U-Boot] [PATCH] ARM: configs: Enable DM_ETH for SBx81LIFKW and SBx81LIFXCAT
Chris Packham
- [U-Boot] [PATCH v2 0/6] Extend mv88e61xx driver to support 88E6071
Chris Packham
- [U-Boot] [PATCH v4 1/2] pinctrl: mediatek: fix warning
Fabien Parent
- [U-Boot] [PATCH v4 2/2] board: mediatek: Add pumpkin board support
Fabien Parent
- [U-Boot] x86: Slim Bootloader(https://github.com/slimbootloader/slimbootloader) support
Park, Aiden
- [U-Boot] [PATCH v2 0/8] x86: Add basic Slim Bootloader payload support
Park, Aiden
- [U-Boot] [PATCH v2 1/8] x86: Add new slimbootloader CPU type
Park, Aiden
- [U-Boot] [PATCH v2 2/8] x86: slimbootloader: Add a function to access HOB
Park, Aiden
- [U-Boot] [PATCH v2 4/8] x86: slimbootloader: Add serial driver
Park, Aiden
- [U-Boot] [PATCH v2 3/8] x86: slimbootloader: Add memory configuration
Park, Aiden
- [U-Boot] [PATCH v2 7/8] board: Add new slimbootloader board
Park, Aiden
- [U-Boot] [PATCH v2 7/8] board: Add new slimbootloader board
Park, Aiden
- [U-Boot] [PATCH v2 7/8] board: Add new slimbootloader board
Park, Aiden
- [U-Boot] [PATCH v3 0/8] x86: Add basic Slim Bootloader payload support
Park, Aiden
- [U-Boot] [PATCH v3 1/8] x86: Add new slimbootloader CPU type
Park, Aiden
- [U-Boot] [PATCH v3 2/8] x86: Add a common hob library
Park, Aiden
- [U-Boot] [PATCH v3 3/8] x86: slimbootloader: Add memory configuration
Park, Aiden
- [U-Boot] [PATCH v3 4/8] x86: slimbootloader: Add serial driver
Park, Aiden
- [U-Boot] [PATCH v3 5/8] x86: slimbootloader: Set TSC information for timer driver
Park, Aiden
- [U-Boot] [PATCH v3 6/8] x86: slimbootloader: Add a slimbootloader device tree
Park, Aiden
- [U-Boot] [PATCH v3 7/8] board: intel: Add new slimbootloader board
Park, Aiden
- [U-Boot] [PATCH v3 8/8] x86: Skip setting up MTRRs in slimbootloader
Park, Aiden
- [U-Boot] [PATCH v3 1/8] x86: Add new slimbootloader CPU type
Park, Aiden
- [U-Boot] [PATCH v3 4/8] x86: slimbootloader: Add serial driver
Park, Aiden
- [U-Boot] [PATCH v4 0/8] x86: Add basic Slim Bootloader payload support
Park, Aiden
- [U-Boot] [PATCH v4 1/8] x86: Add new slimbootloader CPU type
Park, Aiden
- [U-Boot] [PATCH v4 2/8] x86: Add a common hob library
Park, Aiden
- [U-Boot] [PATCH v4 3/8] x86: slimbootloader: Add memory configuration
Park, Aiden
- [U-Boot] [PATCH v4 4/8] x86: slimbootloader: Add serial driver
Park, Aiden
- [U-Boot] [PATCH v4 5/8] x86: slimbootloader: Set TSC information for timer driver
Park, Aiden
- [U-Boot] [PATCH v4 6/8] x86: slimbootloader: Add a slimbootloader device tree
Park, Aiden
- [U-Boot] [PATCH v4 7/8] board: intel: Add new slimbootloader board
Park, Aiden
- [U-Boot] [PATCH v4 8/8] x86: Skip setting up MTRRs in slimbootloader
Park, Aiden
- [U-Boot] [PATCH v3 1/8] x86: Add new slimbootloader CPU type
Park, Aiden
- [U-Boot] [PATCH v4 0/8] x86: Add basic Slim Bootloader payload support
Park, Aiden
- [U-Boot] [PATCH v4 7/8] board: intel: Add new slimbootloader board
Park, Aiden
- [U-Boot] [PATCH v4 1/8] x86: Add new slimbootloader CPU type
Park, Aiden
- [U-Boot] [PATCH v5 0/8] x86: Add basic Slim Bootloader payload support
Park, Aiden
- [U-Boot] [PATCH v5 1/8] x86: Add new slimbootloader CPU type
Park, Aiden
- [U-Boot] [PATCH v5 2/8] x86: Add a common hob library
Park, Aiden
- [U-Boot] [PATCH v5 3/8] x86: slimbootloader: Add memory configuration
Park, Aiden
- [U-Boot] [PATCH v5 4/8] x86: slimbootloader: Add serial driver
Park, Aiden
- [U-Boot] [PATCH v5 6/8] x86: slimbootloader: Add a slimbootloader device tree
Park, Aiden
- [U-Boot] [PATCH v5 5/8] x86: slimbootloader: Set TSC information for timer driver
Park, Aiden
- [U-Boot] [PATCH v5 7/8] board: intel: Add new slimbootloader board
Park, Aiden
- [U-Boot] [PATCH v5 8/8] x86: Skip setting up MTRRs in slimbootloader
Park, Aiden
- [U-Boot] [PATCH v5 0/8] x86: Add basic Slim Bootloader payload support
Park, Aiden
- [U-Boot] [PATCH v5 1/8] x86: Add new slimbootloader CPU type
Park, Aiden
- [U-Boot] [PATCH v5 3/8] x86: slimbootloader: Add memory configuration
Park, Aiden
- [U-Boot] [PATCH v5 4/8] x86: slimbootloader: Add serial driver
Park, Aiden
- [U-Boot] [PATCH v5 5/8] x86: slimbootloader: Set TSC information for timer driver
Park, Aiden
- [U-Boot] [PATCH v5 7/8] board: intel: Add new slimbootloader board
Park, Aiden
- [U-Boot] [PATCH v5 7/8] board: intel: Add new slimbootloader board
Park, Aiden
- [U-Boot] [PATCH v6 0/8] x86: Add basic Slim Bootloader payload support
Park, Aiden
- [U-Boot] [PATCH v6 1/8] x86: Add new slimbootloader CPU type
Park, Aiden
- [U-Boot] [PATCH v6 2/8] x86: Add a common HOB library
Park, Aiden
- [U-Boot] [PATCH v6 3/8] x86: slimbootloader: Add memory configuration
Park, Aiden
- [U-Boot] [PATCH v6 4/8] x86: slimbootloader: Add serial driver
Park, Aiden
- [U-Boot] [PATCH v6 5/8] x86: slimbootloader: Set TSC information for tsc_timer
Park, Aiden
- [U-Boot] [PATCH v6 6/8] x86: slimbootloader: Add a slimbootloader device tree
Park, Aiden
- [U-Boot] [PATCH v6 7/8] board: intel: Add new slimbootloader board
Park, Aiden
- [U-Boot] [PATCH v6 8/8] x86: Skip setting up MTRRs in slimbootloader
Park, Aiden
- [U-Boot] [PATCH v6 3/8] x86: slimbootloader: Add memory configuration
Park, Aiden
- [U-Boot] [PATCH v6 2/8] x86: Add a common HOB library
Park, Aiden
- [U-Boot] [PATCH v6 5/8] x86: slimbootloader: Set TSC information for tsc_timer
Park, Aiden
- [U-Boot] [PATCH v6 0/8] x86: Add basic Slim Bootloader payload support
Park, Aiden
- [U-Boot] [PATCH v6 7/8] board: intel: Add new slimbootloader board
Park, Aiden
- [U-Boot] [PATCH v6 5/8] x86: slimbootloader: Set TSC information for tsc_timer
Park, Aiden
- [U-Boot] [PATCH v7 0/9] x86: Add basic Slim Bootloader payload support
Park, Aiden
- [U-Boot] [PATCH v7 1/9] x86: Add new slimbootloader CPU type
Park, Aiden
- [U-Boot] [PATCH v7 2/9] x86: lib: fsp: Use EFI_GUID and efi_guid_t
Park, Aiden
- [U-Boot] [PATCH v7 3/9] x86: Add a common HOB library
Park, Aiden
- [U-Boot] [PATCH v7 4/9] x86: slimbootloader: Add memory configuration
Park, Aiden
- [U-Boot] [PATCH v7 5/9] x86: slimbootloader: Add serial driver
Park, Aiden
- [U-Boot] [PATCH v7 6/9] x86: slimbootloader: Set TSC information for tsc_timer
Park, Aiden
- [U-Boot] [PATCH v7 7/9] x86: slimbootloader: Add a slimbootloader device tree
Park, Aiden
- [U-Boot] [PATCH v7 8/9] board: intel: Add new slimbootloader board
Park, Aiden
- [U-Boot] [PATCH v7 9/9] x86: Skip setting up MTRRs in slimbootloader
Park, Aiden
- [U-Boot] [PATCH 1/6] net: macb: sync header definitions as taken from Linux
Anup Patel
- [U-Boot] [PATCH 2/6] net: macb: add support for faster clk rates
Anup Patel
- [U-Boot] [PATCH 3/6] net: macb: use bit access macro from header file
Anup Patel
- [U-Boot] [PATCH 4/6] net: macb: add support for SGMII phy interface
Anup Patel
- [U-Boot] [PATCH 5/6] net: macb: add dma_burst_length config
Anup Patel
- [U-Boot] [PATCH 6/6] net: macb: apply sane DMA configuration
Anup Patel
- [U-Boot] [PATCH v2 1/5] spi: Add SiFive SPI driver
Anup Patel
- [U-Boot] [PATCH v2 3/5] mmc: mmc_spi: Re-write driver using DM framework
Anup Patel
- [U-Boot] [PATCH v2 4/5] riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
Anup Patel
- [U-Boot] [PATCH v3 0/6] SiFive SPI MMC Support
Anup Patel
- [U-Boot] [PATCH v3 1/6] spi: Add SiFive SPI driver
Anup Patel
- [U-Boot] [PATCH v3 2/6] mmc: skip select_mode_and_width for MMC SPI host
Anup Patel
- [U-Boot] [PATCH v3 3/6] mmc: mmc_spi: Re-write driver using DM framework
Anup Patel
- [U-Boot] [PATCH v3 4/6] cmd: Remove mmc_spi command
Anup Patel
- [U-Boot] [PATCH v3 5/6] riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
Anup Patel
- [U-Boot] [PATCH v3 6/6] doc: sifive-fu540: Update README for SiFive SPI and MMC SPI drivers
Anup Patel
- [U-Boot] [PATCH] riscv : serial: use rx watermark to indicate rx data is present
Anup Patel
- [U-Boot] [PATCH v7 7/9] riscv: sifive: fu540: Setup ethaddr env variable using OTP
Anup Patel
- [U-Boot] [PATCH v7 7/9] riscv: sifive: fu540: Setup ethaddr env variable using OTP
Anup Patel
- [U-Boot] [PATCH v9 6/9] net: macb: Extend MACB driver for SiFive Unleashed board
Anup Patel
- [U-Boot] [PATCH v9 9/9] net: macb: Fix check for little-endian system in gmac_configure_dma()
Anup Patel
- [U-Boot] [PATCH v3 3/6] mmc: mmc_spi: Re-write driver using DM framework
Anup Patel
- [U-Boot] [PATCH v3 1/6] spi: Add SiFive SPI driver
Anup Patel
- [U-Boot] [PATCH v4 0/4] SiFive SPI MMC Support
Anup Patel
- [U-Boot] [PATCH v4 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Anup Patel
- [U-Boot] [PATCH v4 2/4] spi: Add SiFive SPI driver
Anup Patel
- [U-Boot] [PATCH v4 3/4] riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
Anup Patel
- [U-Boot] [PATCH v4 4/4] doc: sifive-fu540: Update README for SiFive SPI and MMC SPI drivers
Anup Patel
- [U-Boot] [PATCH v4 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Anup Patel
- [U-Boot] [PATCH v4 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Anup Patel
- [U-Boot] [PATCH v5 0/4] SiFive SPI MMC Support
Anup Patel
- [U-Boot] [PATCH v5 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Anup Patel
- [U-Boot] [PATCH v5 2/4] spi: Add SiFive SPI driver
Anup Patel
- [U-Boot] [PATCH v5 3/4] riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
Anup Patel
- [U-Boot] [PATCH v5 4/4] doc: sifive-fu540: Update README for SiFive SPI and MMC SPI drivers
Anup Patel
- [U-Boot] [PATCH v5 2/4] spi: Add SiFive SPI driver
Anup Patel
- [U-Boot] [PATCH v6 0/4] SiFive SPI MMC Support
Anup Patel
- [U-Boot] [PATCH v6 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Anup Patel
- [U-Boot] [PATCH v6 2/4] spi: Add SiFive SPI driver
Anup Patel
- [U-Boot] [PATCH v6 3/4] riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
Anup Patel
- [U-Boot] [PATCH v6 4/4] doc: sifive-fu540: Update README for SiFive SPI and MMC SPI drivers
Anup Patel
- [U-Boot] [PATCH v5 0/4] SiFive SPI MMC Support
Anup Patel
- [U-Boot] [PATCH v5 0/4] SiFive SPI MMC Support
Anup Patel
- [U-Boot] [PATCH 1/2] riscv: Sync csr.h with Linux kernel v5.2
Anup Patel
- [U-Boot] [PATCH 2/2] riscv: Access CSRs using CSR numbers
Anup Patel
- [U-Boot] SiFive clock driver changes for U-Boot 2019.10
Anup Patel
- [U-Boot] SiFive clock driver changes for U-Boot 2019.10
Anup Patel
- [U-Boot] [PATCH v5 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Anup Patel
- [U-Boot] [PATCH v10 0/4] Update SiFive Unleashed Drivers
Anup Patel
- [U-Boot] [PATCH v10 1/4] net: macb: Extend MACB driver for SiFive Unleashed board
Anup Patel
- [U-Boot] [PATCH v10 2/4] net: macb: Fix check for little-endian system in gmac_configure_dma()
Anup Patel
- [U-Boot] [PATCH v10 3/4] riscv: sifive: fu540: Sync-up config header with RISC-V QEMU support
Anup Patel
- [U-Boot] [PATCH v10 4/4] doc: sifive-fu540: Update README to explicitly load DTB for Linux
Anup Patel
- [U-Boot] [PATCH v10 1/4] net: macb: Extend MACB driver for SiFive Unleashed board
Anup Patel
- [U-Boot] [PATCH v10 2/4] net: macb: Fix check for little-endian system in gmac_configure_dma()
Anup Patel
- [U-Boot] [PATCH v11 0/4] Update SiFive Unleashed Drivers
Anup Patel
- [U-Boot] [PATCH v11 1/4] net: macb: Extend MACB driver for SiFive Unleashed board
Anup Patel
- [U-Boot] [PATCH v11 2/4] net: macb: Fix check for little-endian system in gmac_configure_dma()
Anup Patel
- [U-Boot] [PATCH v11 3/4] riscv: sifive: fu540: Sync-up config header with RISC-V QEMU support
Anup Patel
- [U-Boot] [PATCH v11 4/4] doc: sifive-fu540: Update README to explicitly load DTB for Linux
Anup Patel
- [U-Boot] [PATCH v10 4/4] doc: sifive-fu540: Update README to explicitly load DTB for Linux
Anup Patel
- [U-Boot] [PATCH v12 0/1] Update SiFive Unleashed Drivers
Anup Patel
- [U-Boot] [PATCH v12 1/1] doc: sifive-fu540: Update README to explicitly load DTB for Linux
Anup Patel
- [U-Boot] [PATCH] riscv : serial: use rx watermark to indicate rx data is present
Anup Patel
- [U-Boot] [PATCH v2 01/11] fdtdec: make CONFIG_OF_PRIOR_STAGE available in SPL
Anup Patel
- [U-Boot] [PATCH v2 02/11] Makefile: support building SPL FIT images without device trees
Anup Patel
- [U-Boot] [PATCH v2 03/11] spl: fit: use U-Boot device tree when FIT image has no device tree
Anup Patel
- [U-Boot] [PATCH v2 04/11] riscv: add run mode configuration for SPL
Anup Patel
- [U-Boot] [PATCH v2 05/11] spl: support booting via RISC-V OpenSBI
Anup Patel
- [U-Boot] [PATCH v2 06/11] riscv: add SPL support
Anup Patel
- [U-Boot] [PATCH v2 07/11] riscv: support SPL stack and global data relocation
Anup Patel
- [U-Boot] [PATCH v2 08/11] riscv: add a generic FIT generator script
Anup Patel
- [U-Boot] [PATCH v2 09/11] riscv: set default FIT generator script and build target for SPL builds
Anup Patel
- [U-Boot] [PATCH v2 10/11] riscv: qemu: add SPL configuration
Anup Patel
- [U-Boot] [PATCH v2 11/11] doc: update QEMU RISC-V documentation
Anup Patel
- [U-Boot] [PATCH v2 00/11] SPL support for RISC-V
Anup Patel
- [U-Boot] [PATCH] sifive: riscv: update Hifive Unleashed configuration infrastructure
Anup Patel
- [U-Boot] [PATCH v2 05/11] spl: support booting via RISC-V OpenSBI
Anup Patel
- [U-Boot] [PATCH] sifive: riscv: update Hifive Unleashed configuration infrastructure
Anup Patel
- [U-Boot] [PATCH v9 0/9] Update SiFive Unleashed Drivers
Atish Patra
- [U-Boot] [PATCH] riscv: image: save space on the magic number field
Atish Patra
- [U-Boot] [PATCH] net: mvpp2: support setting hardware addresses from ethernet core
Matt Pelland
- [U-Boot] [PATCH v2] net: mvpp2: support setting hardware addresses from ethernet core
Matt Pelland
- [U-Boot] mkimage unable to assign sign value to fitimage
deepak kumar Pradhan
- [U-Boot] mkimage unable to assign sign value to fitimage
deepak kumar Pradhan
- [U-Boot] [PATCH v4 4/6] test/py: Add base test case for A/B updates
Sam Protsenko
- [U-Boot] [PATCH v4 5/6] doc: android: Add simple guide for A/B updates
Sam Protsenko
- [U-Boot] [PATCH 1/2] env: ti: Increase boot partition
Sam Protsenko
- [U-Boot] [PATCH 2/2] arm: am57xx: Allow bootm to load larger kernels
Sam Protsenko
- [U-Boot] [PATCH v4 6/6] env: am57xx: Implement A/B boot process
Sam Protsenko
- [U-Boot] [PATCH v3 3/3] doc: relocate/rename Android README and add BCB overview
Sam Protsenko
- [U-Boot] [PATCH] doc: Move fastboot protocol doc to android dir
Sam Protsenko
- [U-Boot] [PATCH] test/py: avb: Move AVB test to android dir
Sam Protsenko
- [U-Boot] [PATCH] test/py: gpt: Use long options for sgdisk
Sam Protsenko
- [U-Boot] [PATCH] fastboot: Add "is-userspace" variable
Sam Protsenko
- [U-Boot] [PATCH v2] fastboot: getvar: Add "is-userspace" variable
Sam Protsenko
- [U-Boot] [PATCH v2] fastboot: Remove "bootloader-version" variable
Sam Protsenko
- [U-Boot] [PATCH] fastboot: Remove "bootloader-version" variable
Sam Protsenko
- [U-Boot] [PATCH] test/py: gpt: Use long options for sgdisk
Sam Protsenko
- [U-Boot] [PATCH] env: ti: Improve "fastboot reboot bootloader" handling
Sam Protsenko
- [U-Boot] [RFC] env: ti: Handle reboot reason from BCB
Sam Protsenko
- [U-Boot] [PATCH v5 6/6] env: am57xx: Implement A/B boot process
Sam Protsenko
- [U-Boot] [PATCH] test/py: avb: Move AVB test to android dir
Sam Protsenko
- [U-Boot] [PATCH] test/py: avb: Move AVB test to android dir
Sam Protsenko
- [U-Boot] [PATCH v4 0/4] Add 'bcb' command to read/modify/write Android BCB
Sam Protsenko
- [U-Boot] [PATCH] env: ti: boot: Handle reboot reason from BCB
Sam Protsenko
- [U-Boot] [PATCH] env: ti: boot: Use ttyS2 instead of ttyO2
Sam Protsenko
- [U-Boot] [PATCH] env: ti: boot: Use ttyS2 instead of ttyO2
Sam Protsenko
- [U-Boot] [RFC PATCH] fastboot: Implement fetching uboot env variables via fastboot getvar
Sam Protsenko
- [U-Boot] [PATCH] env: ti: boot: Handle reboot reason from BCB
Sam Protsenko
- [U-Boot] [PATCH v4 0/4] Add 'bcb' command to read/modify/write Android BCB
Sam Protsenko
- [U-Boot] [PATCH 1/5] doc: Move README.android-fastboot-protocol to doc/android/
Sam Protsenko
- [U-Boot] [PATCH 2/5] treewide: Fix stale references of Android docs
Sam Protsenko
- [U-Boot] [PATCH v2 1/5] doc: Move README.android-fastboot-protocol to doc/android/
Sam Protsenko
- [U-Boot] [PATCH v2 2/5] treewide: Fix stale references of Android docs
Sam Protsenko
- [U-Boot] [PATCH v2 3/5] cmd: bcb: Fix duplicated handling in two case-branches
Sam Protsenko
- [U-Boot] [PATCH v2 4/5] cmd: bcb: Use strcmp() instead of strncmp() for string literals
Sam Protsenko
- [U-Boot] [PATCH v2 5/5] cmd: bcb: Apply non-functional refinements
Sam Protsenko
- [U-Boot] [PATCH v2 3/5] cmd: bcb: Fix duplicated handling in two case-branches
Sam Protsenko
- [U-Boot] [PATCH v2 3/5] cmd: bcb: Fix duplicated handling in two case-branches
Sam Protsenko
- [U-Boot] [PATCH] env: ti: boot: Handle reboot reason from BCB
Sam Protsenko
- [U-Boot] [PATCH v2] env: ti: boot: Handle reboot reason from BCB
Sam Protsenko
- [U-Boot] [PATCH] env: ti: boot: Use ttyS2 instead of ttyO2
Sam Protsenko
- [U-Boot] [PATCH] env: ti: boot: Use ttyS2 instead of ttyO2
Sam Protsenko
- [U-Boot] [PATCH] env: ti: boot: Use ttyS2 instead of ttyO2
Sam Protsenko
- [U-Boot] [PATCH] doc: Move fastboot protocol doc to android dir
Sam Protsenko
- [U-Boot] [PATCH] doc: Move fastboot protocol doc to android dir
Sam Protsenko
- [U-Boot] [PATCH 1/2] env: ti: Increase boot partition
Sam Protsenko
- [U-Boot] [PATCH 1/2] configs: am57xx_evm_defconfig: Enable 'bcb' command
Sam Protsenko
- [U-Boot] [PATCH 2/2] configs: am57xx_evm_defconfig: Enable 'dtimg' command
Sam Protsenko
- [U-Boot] [PATCH v3] env: ti: boot: Handle reboot reason from BCB
Sam Protsenko
- [U-Boot] [PATCH v2] env: ti: boot: Handle reboot reason from BCB
Sam Protsenko
- [U-Boot] [PATCH] board: ti: am57xx: Correct the fastboot product var
Sam Protsenko
- [U-Boot] [GIT] Pull request: u-boot-dfu (22.07.2019)
Sam Protsenko
- [U-Boot] [PATCH] test/py: avb: Move AVB test to android dir
Sam Protsenko
- [U-Boot] [PATCH] board: ti: am57xx: Correct the fastboot product var
Sam Protsenko
- [U-Boot] [PATCH] board: ti: am57xx: Correct the fastboot product var
Sam Protsenko
- [U-Boot] [PATCH v2] omap: Correct the fastboot product var
Sam Protsenko
- [U-Boot] [PATCH] board: ti: am57xx: Correct the fastboot product var
Sam Protsenko
- [U-Boot] [PATCH v2 1/2] configs: am57xx_evm_defconfig: Enable 'bcb' command
Sam Protsenko
- [U-Boot] [PATCH v2 2/2] configs: am57xx_evm_defconfig: Enable 'dtimg' command
Sam Protsenko
- [U-Boot] [PATCH 1/2] configs: am57xx_evm_defconfig: Enable 'bcb' command
Sam Protsenko
- [U-Boot] [GIT] Pull request: u-boot-dfu (22.07.2019)
Sam Protsenko
- [U-Boot] [PATCH 1/2] avb: Fix build when CONFIG_OPTEE_TA_AVB is disabled
Sam Protsenko
- [U-Boot] [PATCH 2/2] cmd: avb: Fix compiler warnings
Sam Protsenko
- [U-Boot] [PATCH 0/2] tools: mkenvimage: Fixes for reading from pipes
Andre Przywara
- [U-Boot] [PATCH v2 0/7] sunxi: Add H6 DDR3 DRAM support
Andre Przywara
- [U-Boot] [PATCH v2 1/7] sunxi: H6: DRAM: avoid memcpy() on MMIO registers
Andre Przywara
- [U-Boot] [PATCH v2 2/7] sunxi: H6: DRAM: follow recommended PHY init algorithm
Andre Przywara
- [U-Boot] [PATCH v2 3/7] sunxi: H6: move LPDDR3 timing definition into separate file
Andre Przywara
- [U-Boot] [PATCH v2 4/7] sunxi: H6: Add DDR3 support to DRAM controller driver
Andre Przywara
- [U-Boot] [PATCH v2 5/7] sunxi: H6: Add DDR3-1333 timings
Andre Przywara
- [U-Boot] [PATCH v2 6/7] sunxi: H6: Add DDR3 DRAM delay values
Andre Przywara
- [U-Boot] [PATCH v2 7/7] sunxi: H6: Add basic Eachlink H6 Mini support
Andre Przywara
- [U-Boot] [linux-sunxi] [PATCH] phy: sun4i-usb: Fix PHY0 routing and passby configuration for MUSB
Andre Przywara
- [U-Boot] [PATCH v3 0/7] sunxi: Add H6 DDR3 DRAM support
Andre Przywara
- [U-Boot] [PATCH v3 1/7] sunxi: H6: DRAM: avoid memcpy() on MMIO registers
Andre Przywara
- [U-Boot] [PATCH v3 2/7] sunxi: H6: DRAM: follow recommended PHY init algorithm
Andre Przywara
- [U-Boot] [PATCH v3 3/7] sunxi: H6: move LPDDR3 timing definition into separate file
Andre Przywara
- [U-Boot] [PATCH v3 4/7] sunxi: H6: Add DDR3 support to DRAM controller driver
Andre Przywara
- [U-Boot] [PATCH v3 5/7] sunxi: H6: Add DDR3-1333 timings
Andre Przywara
- [U-Boot] [PATCH v3 6/7] sunxi: H6: Add DDR3 DRAM delay values
Andre Przywara
- [U-Boot] [PATCH v3 7/7] sunxi: H6: Add basic Eachlink H6 Mini support
Andre Przywara
- [U-Boot] [PATCH v3 7/7] sunxi: H6: Add basic Eachlink H6 Mini support
Andre Przywara
- [U-Boot] [PATCH v3 7/7] sunxi: H6: Add basic Eachlink H6 Mini support
Andre Przywara
- [U-Boot] [PATCH] video: arm: rpi: Avoid crash without HDMI monitor connected
Andre Przywara
- [U-Boot] [PATCH] video: arm: rpi: Bail out early if querying video information fails
Andre Przywara
- [U-Boot] [PATCH] video: arm: rpi: Avoid crash without HDMI monitor connected
Andre Przywara
- [U-Boot] [PATCH v2 0/7] sunxi: Add H6 DDR3 DRAM support
André Przywara
- [U-Boot] [PATCH] spi: spi-mem: Fix read data size issue
Vignesh Raghavendra
- [U-Boot] [EXT] Re: [Patch V3] drivers: mtd :spi: Enable 4B opcodes for SPANSION s25fl512s
Vignesh Raghavendra
- [U-Boot] [EXT] Re: [Patch V3] drivers: mtd :spi: Enable 4B opcodes for SPANSION s25fl512s
Vignesh Raghavendra
- [U-Boot] Want a Das U-Boot project logo
Eric S. Raymond
- [U-Boot] Want a Das U-Boot project logo
Eric S. Raymond
- [U-Boot] (no subject)
Tom Rini
- [U-Boot] (no subject)
Tom Rini
- [U-Boot] [PATCH 0/2] tools: mkenvimage: Fixes for reading from pipes
Tom Rini
- [U-Boot] [PULL] u-boot-atmel-fixes-2019.07-b
Tom Rini
- [U-Boot] [PATCH] poplar: increase SYS_MALLOC_F_LEN for DM_FLAG_PRE_RELOC support
Tom Rini
- [U-Boot] [PATCH v2] cmd: mem: Add a command to fill the memory with random data
Tom Rini
- [U-Boot] Pull request: u-boot-rockchip/tags/rockchip-for-v2019.07-rc5-2
Tom Rini
- [U-Boot] [PATCH 0/4] davinci: omapl138-lcdk: enable CONFIG_SPL_DM
Tom Rini
- [U-Boot] [PATCH 0/4] nand: davinci: enable driver model for NAND
Tom Rini
- [U-Boot] [U-Boot-Board-Maintainers] [U-Boot-Custodians] [ANN] U-Boot v2019.07-rc4 released
Tom Rini
- [U-Boot] Question regarding the Common Clock Framework CCF v5 patches
Tom Rini
- [U-Boot] [PATCH 0/4] davinci: fix build warnings
Tom Rini
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190704
Tom Rini
- [U-Boot] [PATCH] board: amlogic: add mailing-list to MAINTAINERS
Tom Rini
- [U-Boot] pull request: raspberry pi updates
Tom Rini
- [U-Boot] Pull request: u-boot-rockchip/tags/rockchip-for-v2019.07-rc5-3
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] Please pull u-boot-video
Tom Rini
- [U-Boot] Please pull u-boot-dm (wandboard fix)
Tom Rini
- [U-Boot] [PATCH v2 1/3] board_r: move initr_watchdog to be called after initr_serial
Tom Rini
- [U-Boot] [PATCH v2 3/3] arm: mediatek: remove arch_misc_init
Tom Rini
- [U-Boot] [RFC 2/2] sandbox: Update dts files
Tom Rini
- [U-Boot] [PULL] u-boot-mips
Tom Rini
- [U-Boot] [ANN] U-Boot v2019.07 released
Tom Rini
- [U-Boot] [ANN] U-Boot v2019.07 released
Tom Rini
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190704
Tom Rini
- [U-Boot] Pull request for UEFI sub-system for v2019.10-rc1
Tom Rini
- [U-Boot] Pull request for mmc sub-system for v2019.07-rc4 round 2
Tom Rini
- [U-Boot] [PULL] u-boot-atmel-2019.10-a
Tom Rini
- [U-Boot] [RESEND PATCH v2 00/15] Add Intel Agilex SoC support
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] Pull request: u-boot-ubi/master
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] [PATCH 00/18] autoboot: Tidy up autoboot code
Tom Rini
- [U-Boot] [PATCH v4 1/2] fit: Support compression for non-kernel components (e.g. FDT)
Tom Rini
- [U-Boot] [RFC] bug.h: Drop filename from BUG/WARNING logs if building for TPL/SPL
Tom Rini
- [U-Boot] [PATCH v3 1/4] drivers: pci_ep: Introduce UCLASS_PCI_EP uclass
Tom Rini
- [U-Boot] [PATCH v3 2/4] pci_ep: add Cadence PCIe endpoint driver
Tom Rini
- [U-Boot] [PATCH v3 3/4] pci_ep: add pci endpoint sandbox driver
Tom Rini
- [U-Boot] [PATCH v3 4/4] test: pci_ep: add basic pci_ep tests
Tom Rini
- [U-Boot] [PATCH 01/12] spl: Fix typo in kernel doc
Tom Rini
- [U-Boot] [PATCH 02/12] arm: spear: Drop useless board_init_r call
Tom Rini
- [U-Boot] [PATCH 03/12] arm: spear: Call the SPL 'SPL', not 'Xloader'
Tom Rini
- [U-Boot] [PATCH 04/12] arm: spear: Drop false comment
Tom Rini
- [U-Boot] [PATCH 05/12] arm: spear: Fix the main comment in start.S
Tom Rini
- [U-Boot] [PATCH 06/12] arm: spear: Purely cosmetic changes in start.S
Tom Rini
- [U-Boot] [PATCH 07/12] arm: spear: Use PUSH/POP mnemonics when relevant
Tom Rini
- [U-Boot] [PATCH 08/12] arm: spear: Reference the link register with LR instead of R14
Tom Rini
- [U-Boot] [PATCH 09/12] arm: spear: Simplify start.S organization
Tom Rini
- [U-Boot] [PATCH 10/12] arm: spear: Support returning to BootROM
Tom Rini
- [U-Boot] [PATCH 11/12] arm: spear: Do not link the _main branch
Tom Rini
- [U-Boot] [PATCH 12/12] arm: spear: Return to BootROM if failing to boot from the main device
Tom Rini
- [U-Boot] [PATCH] tpm: wait for valid status
Tom Rini
- [U-Boot] [PATCHv2 1/2] configs: Rename CONFIG_IMAGE_FORMAT_LEGACY to CONFIG_LEGACY_IMAGE_FORMAT
Tom Rini
- [U-Boot] [PATCHv2 2/2] SPL: Default to disabling legacy image support when using FIT
Tom Rini
- [U-Boot] [PATCH v3 1/3] include: android_bootloader_message.h: Minimize the diff to AOSP
Tom Rini
- [U-Boot] [PATCH v3 2/3] cmd: Add 'bcb' command to read/modify/write BCB fields
Tom Rini
- [U-Boot] [PATCH v3 3/3] doc: relocate/rename Android README and add BCB overview
Tom Rini
- [U-Boot] [PATCH] arm: mach-omap2: am33xx: Init pinmux before clock
Tom Rini
- [U-Boot] [PATCH] gpio: pca953x: Add TI TCA9539 compatible string
Tom Rini
- [U-Boot] [PATCH v3 4/4] test: pci_ep: add basic pci_ep tests
Tom Rini
- [U-Boot] [GIT PULL] UniPhier SoC updates for v2019.10-rc1
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PATCH 3/3] spl: fit: Place OS_BOOT DTB at CONFIG_SYS_SPL_ARGS_ADDR if defined
Tom Rini
- [U-Boot] [PATCH 2/3] spl: ubi: Add support for loading simple fitImage
Tom Rini
- [U-Boot] [PATCH v2] board/BuR/brsmarc1: initial commit
Tom Rini
- [U-Boot] [PATCH] test: Disable pci_ep test for now
Tom Rini
- [U-Boot] [PATCH 1/2] board: pm9261: Convert to CONFIG_DM_USB and CONFIG_DM_VIDEO
Tom Rini
- [U-Boot] [PATCH 2/2] board: pm9263: Convert to CONFIG_DM_USB and CONFIG_DM_VIDEO
Tom Rini
- [U-Boot] [PATCH u-boot] pci: ensure enumeration of all devices in pci_init
Tom Rini
- [U-Boot] [PATCH V2 1/3] test: dm: adc: use the real device name
Tom Rini
- [U-Boot] [PATCH V2 2/3] test: dm: usb: use the real device name
Tom Rini
- [U-Boot] [PATCH V2 3/3] drivers: core: use strcmp when find device by name
Tom Rini
- [U-Boot] [PATCH] cmd: nvedit: Add sub-command 'env info'
Tom Rini
- [U-Boot] [PATCH 1/2] spl: Move SPL_MMC_TINY option to appear under SPL menu
Tom Rini
- [U-Boot] [PATCH 2/2] mmc: Register only the first MMC device on MMC_TINY
Tom Rini
- [U-Boot] [PATCH] rtc: ds1307: add support for m41t11
Tom Rini
- [U-Boot] [PATCH 1/3] ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5
Tom Rini
- [U-Boot] [PATCH 2/3] ARM: omap3: evm: Enable DM_USB in defconfig
Tom Rini
- [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET
Tom Rini
- [U-Boot] [PATCH v2] rtc: add Microcrystal RV-8803 driver
Tom Rini
- [U-Boot] [PATCH] ARM: legoev3: convert to driver model
Tom Rini
- [U-Boot] [PATCH v7] ARM: am335x: Add phyCORE AM335x R2 support
Tom Rini
- [U-Boot] [PATCH v3 1/2] power: pmic: Kconfig: Add SPL_PMIC configs for palmas/lp873x/lp87565
Tom Rini
- [U-Boot] [PATCH v3 2/2] power: regulator: Kconfig: Add SPL_DM_REGULATOR configs for palmas/lp873x/lp87565
Tom Rini
- [U-Boot] [PATCH] configs: Make USE_TINY_PRINTF depend on SPL||TPL and be default
Tom Rini
- [U-Boot] [PATCH] pinctrl: pinctrl-single: Add 'pinctrl-single, bits' support
Tom Rini
- [U-Boot] [PATCH] ARM: davinci: da850: Manual pinmux only when PINCTRL not available
Tom Rini
- [U-Boot] [PATCH] ARM: dts: da850: Resync with Linux 5.1.9
Tom Rini
- [U-Boot] [PATCH] ARM: dts: logicpd-som-lv: Resync with Kernel 5.1.9
Tom Rini
- [U-Boot] [PATCH v4] gpio: add gpio-hog support
Tom Rini
- [U-Boot] [PATCH v2] regulator: Allow autosetting fixed regulators
Tom Rini
- [U-Boot] [PATCH] ARM: dts: logicpd som-lvs and torpedos: Shrink SPL DTB
Tom Rini
- [U-Boot] [PATCH] test: Disable pci_ep test for now
Tom Rini
- [U-Boot] [PATCH 1/5] doc: Move README.android-fastboot-protocol to doc/android/
Tom Rini
- [U-Boot] [PATCH v4] gpio: add gpio-hog support
Tom Rini
- [U-Boot] [PATCH v5 1/1] cmd: part: Add 'number' sub-command
Tom Rini
- [U-Boot] [PULL] u-boot-stm32/master for v2019.10-rc1: u-boot-stm32-20190712
Tom Rini
- [U-Boot] test.py failure in test_ut[ut_dm_pci_ep_base]
Tom Rini
- [U-Boot] Please pull u-boot-mmc
Tom Rini
- [U-Boot] Please pull u-boot-mmc
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] [PATCH 0/5] travis: Build and test ASPEED board
Tom Rini
- [U-Boot] [PATCH] travis.yml: change Ubuntu version to xenial
Tom Rini
- [U-Boot] [PATCH] AM33xx: Fix bad addressing in PLL dividers setting
Tom Rini
- [U-Boot] [RFC] travis-ci: source for grub*.efi
Tom Rini
- [U-Boot] [PATCH 2/2] linux/bitops.h: split BITS, GENMASK macros out into <linux/bits.h>
Tom Rini
- [U-Boot] [PATCH] menu: don't bother going interactive with just one menu item
Tom Rini
- [U-Boot] [PATCH v3] board: mediatek: Add pumpkin board support
Tom Rini
- [U-Boot] [PATCH] travis.yml: change Ubuntu version to xenial
Tom Rini
- [U-Boot] SiFive clock driver changes for U-Boot 2019.10
Tom Rini
- [U-Boot] [RFC] bug.h: Drop filename from BUG/WARNING logs if building for TPL/SPL
Tom Rini
- [U-Boot] [PATCH 2/2] watchdog: omap_wdt: Disable DM watchdog support in SPL
Tom Rini
- [U-Boot] [PATCH] spl: implement stack usage check
Tom Rini
- [U-Boot] [PATCH 3/5] traivs: Build aspeed boards
Tom Rini
- [U-Boot] [PATCH] gitlab-ci: Add evb-ast2500 test.py test
Tom Rini
- [U-Boot] [PATCH 3/5] traivs: Build aspeed boards
Tom Rini
- [U-Boot] [PATCH] am335x_boneblack_vboot: Disable asm memcpy/memset in SPL
Tom Rini
- [U-Boot] [PATCH] gitlab-ci: Add pyelftools when needed
Tom Rini
- [U-Boot] [PATCH 1/2] GitLab CI: Split the world build into 4 jobs
Tom Rini
- [U-Boot] [PATCH 2/2] gitlab-ci: Move the pyelfutils section
Tom Rini
- [U-Boot] [PATCH 1/2] watchdog: omap_wdt: Convert watchdog driver to use DT and DM
Tom Rini
- [U-Boot] [PATCH] .gitlab-ci.yml: Initial conversion of Travis CI build to GitLab CI
Tom Rini
- [U-Boot] [PATCH 1/5] configs: aspeed: Unset CONFIG_MMC
Tom Rini
- [U-Boot] [PATCH 2/5] configs: aspeed: Add HUSH and random ethernet addr
Tom Rini
- [U-Boot] [PATCH 4/5] travis: Add ASPEED ast2500 to qemu tests
Tom Rini
- [U-Boot] [PATCH 5/5] travis: Build aspeed board with qemu HEAD
Tom Rini
- [U-Boot] [PATCH] lib: rsa: add support to other openssl engine types than pkcs11
Tom Rini
- [U-Boot] [PATCH v4] rtc: Add DM support to ds3231
Tom Rini
- [U-Boot] [PATCH] ext4: fix calculating inode blkcount for non-512 blocksize filesystems
Tom Rini
- [U-Boot] [PATCH] ext4: add support for filesystems without JOURNAL
Tom Rini
- [U-Boot] [PATCH v2 1/1] ARM: correct detection of thumb mode
Tom Rini
- [U-Boot] [PATCH v2 1/2] regulator: Factor out common enable code
Tom Rini
- [U-Boot] [PATCH v2 2/2] regulator: Allow enabling GPIO regulator
Tom Rini
- [U-Boot] [PATCH] common: Fix autocompletion with CONFIG_CMDLINE_PS_SUPPORT
Tom Rini
- [U-Boot] [PATCH v7 1/2] env: register erase command
Tom Rini
- [U-Boot] [PATCH v7 2/2] env: mmc: add erase-function
Tom Rini
- [U-Boot] [PATCH 1/2] tools: mkenvimage: Fix reading from slow pipe
Tom Rini
- [U-Boot] [PATCH 2/2] tools: mkenvimage: Always consider non-regular files
Tom Rini
- [U-Boot] [PATCH v3] cmd: mem: Add a command to fill the memory with random data
Tom Rini
- [U-Boot] [PATCH] doc: Move fastboot protocol doc to android dir
Tom Rini
- [U-Boot] [PATCH] test/py: gpt: Use long options for sgdisk
Tom Rini
- [U-Boot] [PATCH v2 1/2] arm: move CONFIG_TFABOOT to generic Kconfig
Tom Rini
- [U-Boot] [PATCH v2 2/2] arm: qemu: fix failure in flash initialization if booting from TF-A
Tom Rini
- [U-Boot] [PATCH 1/2] qemu-riscv: enable VIRTIO_PCI
Tom Rini
- [U-Boot] [PATCH 1/5] CVE-2019-13103: disk: stop infinite recursion in DOS Partitions
Tom Rini
- [U-Boot] [PATCH 2/5] CVE-2019-13105: ext4: fix double-free in ext4_cache_read
Tom Rini
- [U-Boot] [PATCH 3/5] CVE-2019-13104: ext4: check for underflow in ext4fs_read_file
Tom Rini
- [U-Boot] [PATCH 4/5] ext4: gracefully fail on divide-by-0
Tom Rini
- [U-Boot] [PATCH 5/5] CVE-2019-13106: ext4: fix out-of-bounds memset
Tom Rini
- [U-Boot] [PATCH] power-domain.h: Fix typo
Tom Rini
- [U-Boot] [PATCH] arm: mediatek: add missing arch timer configuration for MT7629
Tom Rini
- [U-Boot] [PATCH] chromium: Update docs to clone vboot_reference directly
Tom Rini
- [U-Boot] [PATCH 1/3] arm: dts: MediaTek: fix clock order for timer0 node of mt7629.dtsi
Tom Rini
- [U-Boot] [PATCH 2/3] configs: mt7629_rfb: use arm arch timer instead of mtk timer
Tom Rini
- [U-Boot] [PATCH 3/3] arm: dts: MediaTek: remove tick-timer from mt7629.dtsi
Tom Rini
- [U-Boot] [PATCH] blk: Invalidate block cache when switching hwpart
Tom Rini
- [U-Boot] [PATCH 1/1] board: Arcturus: ucp1020: Removing obsoleted stuff
Tom Rini
- [U-Boot] [PATCH] pci_ep: fix wrong addressing to barno
Tom Rini
- [U-Boot] [PATCH v2 01/12] mmc: am654_sdhci: Allow driver to probe without PDs specified
Tom Rini
- [U-Boot] [PATCH v2 02/12] spl: Allow performing BSS init early before board_init_f()
Tom Rini
- [U-Boot] [PATCH v2 03/12] spl: Make image loader infrastructure more universal
Tom Rini
- [U-Boot] [PATCH v2 04/12] arm: K3: Introduce System Firmware loader framework
Tom Rini
- [U-Boot] [PATCH v2 05/12] armV7R: K3: am654: Allow using SPL BSS pre-relocation
Tom Rini
- [U-Boot] [PATCH v2 06/12] armv7R: K3: am654: Use full malloc implementation in SPL
Tom Rini
- [U-Boot] [PATCH v2 07/12] armV7R: K3: am654: Load SYSFW binary and config from boot media
Tom Rini
- [U-Boot] [PATCH v2 08/12] configs: am65x_evm_r5: All sysfw to be loaded via MMC
Tom Rini
- [U-Boot] [PATCH v2 09/12] configs: am65x_hs_evm_r5: All sysfw to be loaded via MMC
Tom Rini
- [U-Boot] [PATCH v2 10/12] configs: am65x_evm: Add Support for eMMC boot
Tom Rini
- [U-Boot] [PATCH v2 11/12] configs: am65x_hs_evm: Add Support for eMMC boot
Tom Rini
- [U-Boot] [PATCH v2 12/12] am65x: README: Add eMMC layout and flash instructions
Tom Rini
- [U-Boot] [PATCH v3 01/18] i2c: omap24xx_i2c: Adapt driver to support K3 devices
Tom Rini
- [U-Boot] [PATCH v3 02/18] arm: omap_i2c: Remove unwanted header file inclusion
Tom Rini
- [U-Boot] [PATCH v3 03/18] arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi
Tom Rini
- [U-Boot] [PATCH v3 04/18] arm: dts: k3-am65: Add I2C nodes
Tom Rini
- [U-Boot] [PATCH v3 05/18] arm: dts: k3-am654-base-board: Enable wkup_i2c0 across all boot stages
Tom Rini
- [U-Boot] [PATCH v3 06/18] configs: am65x_evm_defconfig: Enable I2C support
Tom Rini
- [U-Boot] [PATCH v3 07/18] configs: am65x_hs_evm_defconfig: Enable I2C support
Tom Rini
- [U-Boot] [PATCH v3 09/18] configs: am65x_evm_a53: Enable PCA953X-type GPIO driver
Tom Rini
- [U-Boot] [PATCH v3 08/18] arm64: dts: k3-am654-base-board: Add I2C GPIO expander @ 0x38
Tom Rini
- [U-Boot] [PATCH v3 10/18] configs: am65x_hs_evm_a53: Enable PCA953X-type GPIO driver
Tom Rini
- [U-Boot] [PATCH v3 11/18] configs: am65x_evm_a53: Increase malloc pool before relocation
Tom Rini
- [U-Boot] [PATCH v3 12/18] configs: am65x_hs_evm_a53: Increase malloc pool before relocation
Tom Rini
- [U-Boot] [PATCH v3 13/18] arm: K3: am654: Map common EEPROM data into SRAM scratch space
Tom Rini
- [U-Boot] [PATCH v3 14/18] ti: common: am6: Add support for board description EEPROM
Tom Rini
- [U-Boot] [PATCH v3 15/18] ti: common: am6: Add support for setting MAC addresses
Tom Rini
- [U-Boot] [PATCH v3 16/18] board: ti: am654: Use EEPROM-based board detection
Tom Rini
- [U-Boot] [PATCH v3 17/18] configs: am65x_evm: Add support for applying overlays
Tom Rini
- [U-Boot] [PATCH v3 18/18] configs: am65x_hs_evm: Add support for applying overlays
Tom Rini
- [U-Boot] [PATCH v8 01/14] arm64: dts: k3: Sync sdhci0 node from kernel and change driver name
Tom Rini
- [U-Boot] [PATCH v8 02/14] mmc: am654_sdhci: Remove quirks
Tom Rini
- [U-Boot] [PATCH v8 03/14] regmap: Add API regmap_init_mem_index()
Tom Rini
- [U-Boot] [PATCH v8 04/14] mmc: sdhci: Add support for sdhci-caps-mask
Tom Rini
- [U-Boot] [PATCH v8 05/14] mmc: sdhci: Make sdhci_set_clock() non static
Tom Rini
- [U-Boot] [PATCH v8 06/14] arm: dts: k3: Add phy specific properties to SD card node
Tom Rini
- [U-Boot] [PATCH v8 07/14] mmc: sdhci: Make set_ios_post() return int
Tom Rini
- [U-Boot] [PATCH v8 08/14] mmc: am654_sdhci: Add Support for PHY
Tom Rini
- [U-Boot] [PATCH v8 09/14] configs: am65x_evm: Enable CONFIG_REGMAP
Tom Rini
- [U-Boot] [PATCH v8 10/14] mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings
Tom Rini
- [U-Boot] [PATCH v8 11/14] mmc: am654_sdhci: Add a platform specific set_control_reg() callback
Tom Rini
- [U-Boot] [PATCH v8 12/14] configs: am65x: Add configs to support environment in eMMC
Tom Rini
- [U-Boot] [PATCH v8 13/14] am65x_evm: Add Support for creating a filesystem GPT partition in eMMC
Tom Rini
- [U-Boot] [PATCH v8 14/14] configs: am65x_evm_a53: Add Support for creating GPT partitions
Tom Rini
- [U-Boot] [PATCH] am335x_boneblack_vboot: Disable asm memcpy/memset in SPL
Tom Rini
- [U-Boot] [PATCH] gitlab-ci: Add pyelftools when needed
Tom Rini
- [U-Boot] [PATCH 1/2] GitLab CI: Split the world build into 4 jobs
Tom Rini
- [U-Boot] [PATCH 2/2] gitlab-ci: Move the pyelfutils section
Tom Rini
- [U-Boot] [PATCH] am335x_boneblack_vboot: Disable asm memcpy/memset in SPL
Tom Rini
- [U-Boot] [PATCH v2 05/12] armV7R: K3: am654: Allow using SPL BSS pre-relocation
Tom Rini
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Tom Rini
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Tom Rini
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Tom Rini
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] Pull request: u-boot-riscv/master
Tom Rini
- [U-Boot] Pull request: u-boot-nds32/master
Tom Rini
- [U-Boot] Pull request: u-boot-rockchip/tags/rockchip-for-v2019.07
Tom Rini
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] Pull request: u-boot-rockchip/tags/rockchip-for-v2019.07-2
Tom Rini
- [U-Boot] [PULL] u-boot-stm32/master for v2019.10-rc1: u-boot-stm32-20190723
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] Pull request for UEFI sub-system for v2019.10-rc1 (2)
Tom Rini
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Tom Rini
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Tom Rini
- [U-Boot] [PATCH] gitlab-ci: Update Docker image to xenial-20190720-24Jul2019 tag
Tom Rini
- [U-Boot] Please pull u-boot-dm (take 2)
Tom Rini
- [U-Boot] [PATCH] gitlab-ci: Add pyelftools to the binman testsuite section
Tom Rini
- [U-Boot] [PATCH v5 1/3] common: Move bootm_decomp_image() to image.c (as image_decomp())
Tom Rini
- [U-Boot] [PATCH] Dockerfile: Build a copy of QEMU and install it under /opt
Tom Rini
- [U-Boot] [PATCH] gitlab-ci: Switch to a Docker image that contains a QEMU we build
Tom Rini
- [U-Boot] [PATCH] Dockerfile: Build a copy of QEMU and install it under /opt
Tom Rini
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Tom Rini
- [U-Boot] [PATCH] image: android: allow to wrap uImage into the Android boot image
Tom Rini
- [U-Boot] [PATCH v5 1/1] cmd: part: Add 'number' sub-command
Tom Rini
- [U-Boot] [PATCH v5 1/6] disk: part: Extend API to get partition info
Tom Rini
- [U-Boot] [PATCH v5 2/6] common: Implement A/B metadata
Tom Rini
- [U-Boot] [PATCH v5 3/6] cmd: Add 'ab_select' command
Tom Rini
- [U-Boot] [PATCH v5 4/6] test/py: Add base test case for A/B updates
Tom Rini
- [U-Boot] [PATCH v5 5/6] doc: android: Add simple guide for A/B updates
Tom Rini
- [U-Boot] [PATCH v5 6/6] env: am57xx: Implement A/B boot process
Tom Rini
- [U-Boot] [PATCH 1/1] doc: Cope with Sphinx logging deprecations
Tom Rini
- [U-Boot] [PATCH 1/2] scripts/kernel-doc: update script from Linux 5.2
Tom Rini
- [U-Boot] [PATCH 2/2] scripts/kernel-doc: fix parsing of function pointers
Tom Rini
- [U-Boot] [PATCH v2] spl: sata: support U-Boot load from raw sata disk
Tom Rini
- [U-Boot] [PATCH 1/2] doc: Add .gitignore for the Sphinx build output directory
Tom Rini
- [U-Boot] [PATCH 2/2] doc: Add the U-Boot logo to the html doc
Tom Rini
- [U-Boot] [PATCH] doc: fitImage: Fix conf number incrementation
Tom Rini
- [U-Boot] [PATCH] doc: fitImage: Cosmetics break lines
Tom Rini
- [U-Boot] [PATCH] remoteproc: Fix potential build issues with SPL remoteproc
Tom Rini
- [U-Boot] [PATCH v3 1/4] treewide: Fix stale references of Android docs
Tom Rini
- [U-Boot] [PATCH v3 2/4] cmd: bcb: Fix duplicated handling in two case-branches
Tom Rini
- [U-Boot] [PATCH v3 3/4] cmd: bcb: Use strcmp() instead of strncmp() for string literals
Tom Rini
- [U-Boot] [PATCH v3 4/4] cmd: bcb: Apply non-functional refinements
Tom Rini
- [U-Boot] [RESEND PATCH] distro_bootcmd: refactor virtio to support PCI block devices
Tom Rini
- [U-Boot] [PATCH v2] psci: Fix warnings when compiling with W=1
Tom Rini
- [U-Boot] Please pull u-boot-dm (take 2)
Tom Rini
- [U-Boot] Please pull u-boot-dm (take 2)
Tom Rini
- [U-Boot] [PATCH] test/py: avb: Move AVB test to android dir
Tom Rini
- [U-Boot] Please pull u-boot-dm (take 3)
Tom Rini
- [U-Boot] [PATCH] gitlab-ci: Add pyelftools to the binman testsuite section
Tom Rini
- [U-Boot] [PATCH] gitlab-ci: Update Docker image to xenial-20190720-24Jul2019 tag
Tom Rini
- [U-Boot] [PATCH] Dockerfile: Build a copy of QEMU and install it under /opt
Tom Rini
- [U-Boot] [PATCH] Dockerfile: Build a copy of QEMU and install it under /opt
Tom Rini
- [U-Boot] [PATCH] Dockerfile: Build a copy of QEMU and install it under /opt
Tom Rini
- [U-Boot] [PATCH] Dockerfile: Build a copy of QEMU and install it under /opt
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] Question about GPL v3 font
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] [PATCH PATCH v3 00/12] Add support for applications of overlays in SPL
Tom Rini
- [U-Boot] [PATCH v2 1/7] clk: add support for clk_is_match()
Tom Rini
- [U-Boot] [PATCH 1/1] Dockerfile: add python3-sphinx
Tom Rini
- [U-Boot] [PATCH] ARM: am3517-evm: Remove undefined pinmuxing
Tom Rini
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Tom Rini
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Tom Rini
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Tom Rini
- [U-Boot] [PATCH v2 00/14] ARM: davinci: driver-model improvements
Tom Rini
- [U-Boot] Pull request v2: u-boot-spi/master
Tom Rini
- [U-Boot] [GIT PULL] Pull request: u-boot-imx u -boot-imx-20190719
Tom Rini
- [U-Boot] [PATCH v3 1/9] firmware: ti_sci: Allow for device shared and exclusive requests
Tom Rini
- [U-Boot] [PATCH v3 2/9] firmware: ti_sci: Add processor shutdown API method
Tom Rini
- [U-Boot] [PATCH v3 3/9] firmware: ti_sci: Add a command for releasing all exclusive devices
Tom Rini
- [U-Boot] [PATCH v3 4/9] armv7R: K3: am654: Shut down R5 core after ATF startup on A53
Tom Rini
- [U-Boot] [PATCH v3 5/9] armv7R: k3: Release all the exclusive devices
Tom Rini
- [U-Boot] [PATCH v3 6/9] power-domain: Add private data to power domain
Tom Rini
- [U-Boot] [PATCH v3 7/9] dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
Tom Rini
- [U-Boot] [PATCH v3 8/9] power: domain: ti_sci_power_domains: Add support for exclusive and shared access
Tom Rini
- [U-Boot] [PATCH v3 9/9] arm: dts: k3-am654: Update power-domains property for each node
Tom Rini
- [U-Boot] [PATCH v2 1/5] cmd: remoteproc: Add support for initializing devices individually
Tom Rini
- [U-Boot] [PATCH v2 2/5] cmd: remoteproc: Allow list command to print the probed devices
Tom Rini
- [U-Boot] [PATCH v2 3/5] remoteproc: tisci: add TI-SCI processor control helper functions
Tom Rini
- [U-Boot] [PATCH v2 4/5] remoteproc: k3_rproc: Update the driver to use ti_sci_proc helpers
Tom Rini
- [U-Boot] [PATCH v2 5/5] remoteproc: k3_rproc: Rename to ti_k3_arm64_rproc
Tom Rini
- [U-Boot] [PATCH v3 01/16] arm: K3: j721e: Add basic support for J721E SoC definition
Tom Rini
- [U-Boot] [PATCH v3 02/16] armv7R: K3: j721e: Add support for boot device detection
Tom Rini
- [U-Boot] [PATCH v3 03/16] armv7R: K3: j721e: Unlock all applicable control MMR registers
Tom Rini
- [U-Boot] [PATCH v3 04/16] armv7R: K3: j721e: Store boot index from ROM
Tom Rini
- [U-Boot] [PATCH v3 04/16] armv7R: K3: j721e: Store boot index from ROM
Tom Rini
- [U-Boot] [PATCH v3 05/16] armv7R: K3: j721e: Shut down R5 core after ATF startup on A72
Tom Rini
- [U-Boot] [PATCH v3 06/16] armv7R: K3: j721e: Load SYSFW binary and config from boot media
Tom Rini
- [U-Boot] [PATCH v3 07/16] armv8: K3: j721e: Add custom MMU support
Tom Rini
- [U-Boot] [PATCH v3 08/16] board: ti: j721e: Add board support for j721e evm
Tom Rini
- [U-Boot] [PATCH v3 09/16] board: ti: j721e: Enable fixing up msmc sram node
Tom Rini
- [U-Boot] [PATCH v3 10/16] mmc: am654_sdhci: Separate J721E compatible into 8bit and 4bit versions
Tom Rini
- [U-Boot] [PATCH v3 11/16] dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
Tom Rini
- [U-Boot] [PATCH v3 12/16] arm: dts: ti: Add Support for J721E SoC
Tom Rini
- [U-Boot] [PATCH v3 13/16] arm: dts: k3-j721e: Add initial support for common processor board
Tom Rini
- [U-Boot] [PATCH v3 14/16] arm: dts: k3-j721e: Add r5 specific dt support
Tom Rini
- [U-Boot] [PATCH v3 15/16] configs: j721e_evm_r5: Add initial support
Tom Rini
- [U-Boot] [PATCH v3 16/16] configs: j721e_evm_a72: Add initial support
Tom Rini
- [U-Boot] [PATCH] ARM: am3517-evm: Enable DM_PMIC and DM_REGULATOR functions
Tom Rini
- [U-Boot] [PATCH 1/4] ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup
Tom Rini
- [U-Boot] [PATCH 2/4] ARM: dts: am574x-idk: Add pinmuxes for mmc1 and mmc2
Tom Rini
- [U-Boot] [PATCH 3/4] ARM: dts: am57xx: Disable voltage switching for SD card
Tom Rini
- [U-Boot] [PATCH 4/4] ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
Tom Rini
- [U-Boot] [PATCH] ARM: am3517-evm: Remove manual ethernet reset code
Tom Rini
- [U-Boot] [PATCH] ARM: da850-evm: Remove duplicate UART initialization
Tom Rini
- [U-Boot] [PATCH] ARM: da850-evm: Remove repeated pinmuxing calls
Tom Rini
- [U-Boot] [PATCH] ARM: am3517-evm: Migrate to SPL_OF_CONTROL
Tom Rini
- [U-Boot] [PATCH] ARM: am3517-evm: Remove non-DM legacy code
Tom Rini
- [U-Boot] [PATCH 1/2] ARM: omap3_logic: Enable OMAP EHCI support for SOM-LV Boards
Tom Rini
- [U-Boot] [PATCH 2/2] ARM: omap3_logic & omap35_logic: Disable OMAP EHCI for Torpedo
Tom Rini
- [U-Boot] [PATCH] ARM: am3517_evm: Fix pin muxing to enable EHCI Host in the future
Tom Rini
- [U-Boot] [PATCH] ARM: da850evm: Remove legacy OHCI referencs and unify platform
Tom Rini
- [U-Boot] [PATCH 2/2] arm: am57xx: Allow bootm to load larger kernels
Tom Rini
- [U-Boot] [PATCH] env: ti: boot: Use ttyS2 instead of ttyO2
Tom Rini
- [U-Boot] [PATCH] ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS
Tom Rini
- [U-Boot] [PATCH] ARM: omap3/omap35_logic: Fix broken Logic PD Torpedo booting
Tom Rini
- [U-Boot] [PATCH] ARM: da850-evm: Remove dead/unneeded code
Tom Rini
- [U-Boot] [PATCH v2 1/7] clk: add support for clk_is_match()
Tom Rini
- [U-Boot] [PATCH 1/1] Dockerfile: add python3-sphinx
Tom Rini
- [U-Boot] [PATCH] Dockerfile: Build a copy of QEMU and install it under /opt
Tom Rini
- [U-Boot] [PATCH 1/1] Dockerfile: build GRUB UEFI targets
Tom Rini
- [U-Boot] [PATCH v3] board/BuR/brsmarc1: initial commit
Tom Rini
- [U-Boot] [RESEND PATCH v2 01/13] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
Tom Rini
- [U-Boot] [PATCH 1/1] Dockerfile: build GRUB UEFI targets
Tom Rini
- [U-Boot] Pull request: u-boot-rockchip u-boot-rockchip-20190729
Tom Rini
- [U-Boot] Please pull u-boot-video
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [PATCH] ARM: da850_am18xxevm: Remove config and references
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PATCH v2] arm: mach-keystone: Use appended original image size in image processing
Tom Rini
- [U-Boot] [RESEND PATCH v2 01/13] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
Tom Rini
- [U-Boot] [RESEND PATCH v2 02/13] sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs
Tom Rini
- [U-Boot] [RESEND PATCH v2 03/13] i2c: remove i2c driver-model compatibility layer
Tom Rini
- [U-Boot] [RESEND PATCH v2 04/13] omapl138_lcdk_defconfig: don't build support for SPI
Tom Rini
- [U-Boot] [RESEND PATCH v2 05/13] nand: davinci: make davinci_nand_init() static
Tom Rini
- [U-Boot] [RESEND PATCH v2 06/13] nand: davinci: add support for driver model
Tom Rini
- [U-Boot] [RESEND PATCH v2 07/13] davinci: omapl138-lcdk: enable driver model for NAND
Tom Rini
- [U-Boot] [RESEND PATCH v2 08/13] davinci: da850-evm: enable driver model for NAND
Tom Rini
- [U-Boot] [RESEND PATCH v2 09/13] davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE
Tom Rini
- [U-Boot] [RESEND PATCH v2 10/13] davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF
Tom Rini
- [U-Boot] [RESEND PATCH v2 11/13] davinci: omapl138-lcdk: remove unneeded includes
Tom Rini
- [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL
Tom Rini
- [U-Boot] [RESEND PATCH v2 13/13] configs: omapl138_lcdk: enable NAND self-init in SPL
Tom Rini
- [U-Boot] [PATCH] Add validation for icache/dcache arguments - arguments different from off/on/flush are currently silently ignored.
Tom Rini
- [U-Boot] [PATCH 1/1] lib: uuid: alignment error in gen_rand_uuid()
Tom Rini
- [U-Boot] [PATCH v1 1/3] rtc: move RTC_RX8025 to Kconfig
Tom Rini
- [U-Boot] [PATCH v1 2/3] rtc, rx8025: fix Coding Style
Tom Rini
- [U-Boot] [PATCH v1 3/3] rtc, rx8025: add DM support
Tom Rini
- [U-Boot] [PATCH v1] gpio: fixes for gpio-hog support
Tom Rini
- [U-Boot] [PATCH v4 1/2] pinctrl: mediatek: fix warning
Tom Rini
- [U-Boot] [PATCH v4 2/2] board: mediatek: Add pumpkin board support
Tom Rini
- [U-Boot] [PATCH] gitlab-ci: Switch to a Docker image that contains a QEMU we build
Tom Rini
- [U-Boot] [PATCH v6 1/3] common: Move bootm_decomp_image() to image.c (as image_decomp())
Tom Rini
- [U-Boot] [PATCH v6 2/3] fit: Support compression for non-kernel components (e.g. FDT)
Tom Rini
- [U-Boot] [PATCH v6 3/3] fit: Support compat string property in configuration node
Tom Rini
- [U-Boot] [PATCH 1/1] tools/logos: remove black background of U-Boot logo
Tom Rini
- [U-Boot] [PATCH] doc: board: Add missing board index.rst files
Tom Rini
- [U-Boot] [PATCH] Drop linker-generated array creation when CONFIG_CMDLINE is disabled
Tom Rini
- [U-Boot] [PATCH] doc: arch: sandbox: Replace all the instances of README.sandbox
Tom Rini
- [U-Boot] [ANN] U-Boot v2019.10-rc1 released
Tom Rini
- [U-Boot] [PATCH 1/2] configs: am65x_evm_a53: Disable K3_SYSTEM_CONTROLLER
Tom Rini
- [U-Boot] [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] [GIT PULL] Xilinx/FPGA patches for v2019.10
Tom Rini
- [U-Boot] Please pull u-boot-video
Tom Rini
- [U-Boot] [RFC] drivers: dma: ti-edma3: Enable edma3-tpcc
Tom Rini
- [U-Boot] [PATCH v4] board/BuR/brsmarc1: initial commit
Tom Rini
- [U-Boot] Improvements to Rock960
Peter Robinson
- [U-Boot] [PATCH 1/6] arm64: rockchip: rock960: sync dts files from Linux 5.2-rc6
Peter Robinson
- [U-Boot] [PATCH 2/6] configs: rockchip: rock960: drop options for non-existent HW
Peter Robinson
- [U-Boot] [PATCH 3/6] configs: rockchip: rock960: enable pmic and regulator commands
Peter Robinson
- [U-Boot] [PATCH 4/6] configs: rockchip: rock960: enable DMA for SDHCI controller
Peter Robinson
- [U-Boot] [PATCH 5/6] configs: rockchip: rock960: Add support for USB ethernet adapters
Peter Robinson
- [U-Boot] [PATCH 6/6] configs: rockchip: rock960: enable USB3 support
Peter Robinson
- [U-Boot] U-Boot/EBBR plugfest at ELC-EU?
Peter Robinson
- [U-Boot] U-Boot/EBBR plugfest at ELC-EU?
Peter Robinson
- [U-Boot] [ANN] U-Boot v2019.07 released
Peter Robinson
- [U-Boot] Want a Das U-Boot project logo
Peter Robinson
- [U-Boot] [PATCH 12/16] config: rpi4: Add defconfig for rpi4-32
Peter Robinson
- [U-Boot] [RFC 1/1] efi_loader: usage of cleanup_before_linux()
Peter Robinson
- [U-Boot] [RFC 1/1] efi_loader: usage of cleanup_before_linux()
Peter Robinson
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Peter Robinson
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Peter Robinson
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Peter Robinson
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Peter Robinson
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Peter Robinson
- [U-Boot] [PATCH 1/2] arm: dts: rock960: Enable booting from eMMC when using SPL
Peter Robinson
- [U-Boot] [PATCH 2/2] arm: dts: ficus: Enable booting from eMMC when using SPL
Peter Robinson
- [U-Boot] python3 support for pylibfdt
Peter Robinson
- [U-Boot] [PATCH] watchdog: mtk_wdt: Cosmetic cleanup of latest changes
Stefan Roese
- [U-Boot] [PATCH] mips: mt76xx: Implement new d-cache fix in last_stage_init()
Stefan Roese
- [U-Boot] Watchdog DM - ENOMEM(out of memory) error
Stefan Roese
- [U-Boot] [PULL] u-boot-mips
Stefan Roese
- [U-Boot] [PATCH] arm: mvebu: set 38x and 39x AVS on lower frequency
Stefan Roese
- [U-Boot] [PATCH] ARM: configs: Enable DM_ETH for SBx81LIFKW and SBx81LIFXCAT
Stefan Roese
- [U-Boot] [PATCH 1/1 v1] arm: mvebu: crs305-1g-4s: Enable CMD_BOOTZ and increase SYS_BOOTM_LEN
Stefan Roese
- [U-Boot] [PATCH 4/9] spl: sata: support U-Boot load from raw sata disk
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH u-boot-spi 1/1] spi: mvebu_a3700_spi: Fix clock prescale computation
Stefan Roese
- [U-Boot] [PATCH v3 3/3] doc: relocate/rename Android README and add BCB overview
Eugeniu Rosca
- [U-Boot] [PATCH v3 3/3] doc: relocate/rename Android README and add BCB overview
Eugeniu Rosca
- [U-Boot] [PATCH v2] fastboot: getvar: Add "is-userspace" variable
Eugeniu Rosca
- [U-Boot] [PATCH] fastboot: Remove "bootloader-version" variable
Eugeniu Rosca
- [U-Boot] [PATCH] fastboot: Remove "bootloader-version" variable
Eugeniu Rosca
- [U-Boot] [PATCH v2] fastboot: Remove "bootloader-version" variable
Eugeniu Rosca
- [U-Boot] [PATCH v5 6/6] env: am57xx: Implement A/B boot process
Eugeniu Rosca
- [U-Boot] [PATCH v3 2/3] cmd: Add 'bcb' command to read/modify/write BCB fields
Eugeniu Rosca
- [U-Boot] [PATCH v4 0/4] Add 'bcb' command to read/modify/write Android BCB
Eugeniu Rosca
- [U-Boot] [PATCH v4 1/4] include: android_bootloader_message.h: Minimize the diff to AOSP
Eugeniu Rosca
- [U-Boot] [PATCH v4 2/4] cmd: Add 'bcb' command to read/modify/write BCB fields
Eugeniu Rosca
- [U-Boot] [PATCH v4 3/4] doc: android: relocate/rename README files
Eugeniu Rosca
- [U-Boot] [PATCH v4 4/4] doc: android: add BCB overview and usage
Eugeniu Rosca
- [U-Boot] [PATCH v5 6/6] env: am57xx: Implement A/B boot process
Eugeniu Rosca
- [U-Boot] [PATCH 0/3] Align R-Car Gen3 DTS/bindings/PFC with Linux 5.2
Eugeniu Rosca
- [U-Boot] [PATCH 1/3] pinctrl: renesas: Synchronize Gen2/Gen3 tables with Linux 5.2
Eugeniu Rosca
- [U-Boot] [PATCH 2/3] dt-bindings: Synchronize R-Car Gen3 headers with Linux 5.2
Eugeniu Rosca
- [U-Boot] [PATCH 3/3] ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2
Eugeniu Rosca
- [U-Boot] [RESEND PATCH] core: ofnode: Add ofnode_get_addr_size_index
Eugeniu Rosca
- [U-Boot] [PATCH] pinctrl: renesas: Synchronize Gen2/Gen3 tables with Linux 5.2-rc5
Eugeniu Rosca
- [U-Boot] [RFC PATCH] fastboot: Implement fetching uboot env variables via fastboot getvar
Eugeniu Rosca
- [U-Boot] [PATCH] pinctrl: renesas: Synchronize Gen2/Gen3 tables with Linux 5.2-rc5
Eugeniu Rosca
- [U-Boot] UUID returning 00000000 in 2019.07
Eugeniu Rosca
- [U-Boot] [PATCH] env: ti: boot: Handle reboot reason from BCB
Eugeniu Rosca
- [U-Boot] [PATCH v4 0/4] Add 'bcb' command to read/modify/write Android BCB
Eugeniu Rosca
- [U-Boot] [PATCH 0/5] Fixes and improvements in BCB and Android docs
Eugeniu Rosca
- [U-Boot] [PATCH 1/5] doc: Move README.android-fastboot-protocol to doc/android/
Eugeniu Rosca
- [U-Boot] [PATCH 2/5] treewide: Fix stale references of Android docs
Eugeniu Rosca
- [U-Boot] [PATCH 3/5] cmd: bcb: Fix duplicated handling in two case-branches
Eugeniu Rosca
- [U-Boot] [PATCH 4/5] cmd: bcb: Use strcmp() instead of strncmp() for string literals
Eugeniu Rosca
- [U-Boot] [PATCH 5/5] cmd: bcb: Apply non-functional refinements
Eugeniu Rosca
- [U-Boot] [PATCH 4/5] cmd: bcb: Use strcmp() instead of strncmp() for string literals
Eugeniu Rosca
- [U-Boot] [PATCH v2 0/5] Fixes and improvements in BCB and Android docs
Eugeniu Rosca
- [U-Boot] [PATCH v2 1/5] doc: Move README.android-fastboot-protocol to doc/android/
Eugeniu Rosca
- [U-Boot] [PATCH v2 2/5] treewide: Fix stale references of Android docs
Eugeniu Rosca
- [U-Boot] [PATCH v2 3/5] cmd: bcb: Fix duplicated handling in two case-branches
Eugeniu Rosca
- [U-Boot] [PATCH v2 4/5] cmd: bcb: Use strcmp() instead of strncmp() for string literals
Eugeniu Rosca
- [U-Boot] [PATCH v2 5/5] cmd: bcb: Apply non-functional refinements
Eugeniu Rosca
- [U-Boot] [PATCH 0/5] Fixes and improvements in BCB and Android docs
Eugeniu Rosca
- [U-Boot] [PATCH 5/5] cmd: bcb: Apply non-functional refinements
Eugeniu Rosca
- [U-Boot] [PATCH] env: ti: boot: Handle reboot reason from BCB
Eugeniu Rosca
- [U-Boot] [PATCH 2/5] treewide: Fix stale references of Android docs
Eugeniu Rosca
- [U-Boot] [PATCH v2 3/5] cmd: bcb: Fix duplicated handling in two case-branches
Eugeniu Rosca
- [U-Boot] [PATCH 1/5] doc: Move README.android-fastboot-protocol to doc/android/
Eugeniu Rosca
- [U-Boot] [PATCH 2/5] treewide: Fix stale references of Android docs
Eugeniu Rosca
- [U-Boot] [PATCH 3/5] cmd: bcb: Fix duplicated handling in two case-branches
Eugeniu Rosca
- [U-Boot] [PATCH 4/5] cmd: bcb: Use strcmp() instead of strncmp() for string literals
Eugeniu Rosca
- [U-Boot] [PATCH 5/5] cmd: bcb: Apply non-functional refinements
Eugeniu Rosca
- [U-Boot] [PATCH 1/5] doc: Move README.android-fastboot-protocol to doc/android/
Eugeniu Rosca
- [U-Boot] [PATCH 1/1] lib: uuid: alignment error in gen_rand_uuid()
Eugeniu Rosca
- [U-Boot] [PATCH] doc: Move fastboot protocol doc to android dir
Eugeniu Rosca
- [U-Boot] [PATCH v3 0/4] Fixes and improvements in BCB and Android docs [ver #3]
Eugeniu Rosca
- [U-Boot] [PATCH v3 1/4] treewide: Fix stale references of Android docs
Eugeniu Rosca
- [U-Boot] [PATCH v3 2/4] cmd: bcb: Fix duplicated handling in two case-branches
Eugeniu Rosca
- [U-Boot] [PATCH v3 3/4] cmd: bcb: Use strcmp() instead of strncmp() for string literals
Eugeniu Rosca
- [U-Boot] [PATCH v3 4/4] cmd: bcb: Apply non-functional refinements
Eugeniu Rosca
- [U-Boot] [PATCH] doc: Move fastboot protocol doc to android dir
Eugeniu Rosca
- [U-Boot] [PATCH 3/4] pci: mediatek: Add pci-driver for mt2701
Aleksandr Rybalko
- [U-Boot] [PATCH 2/2] Add i.MX7D based Meerkat96 board support
Manivannan Sadhasivam
- [U-Boot] [PATCH 2/2] Add i.MX7D based Meerkat96 board support
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 0/2] Add board support for iMX8QXP AI_ML board
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 1/2] arm: dts: Add devicetree support for iMXQXP AI_ML board
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 2/2] board: Add support for iMXQXP AI_ML board
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 2/2] board: Add support for iMXQXP AI_ML board
Manivannan Sadhasivam
- [U-Boot] [PATCH v3 0/2] Add board support for iMX8QXP AI_ML board
Manivannan Sadhasivam
- [U-Boot] [PATCH v3 1/2] arm: dts: Add devicetree support for iMXQXP AI_ML board
Manivannan Sadhasivam
- [U-Boot] [PATCH v3 2/2] board: Add support for iMX8QXP AI_ML board
Manivannan Sadhasivam
- [U-Boot] [PATCH v3 2/2] board: Add support for iMX8QXP AI_ML board
Manivannan Sadhasivam
- [U-Boot] [PATCH v4 0/2] Add board support for iMX8QXP AI_ML board
Manivannan Sadhasivam
- [U-Boot] [PATCH v4 1/2] arm: dts: Add devicetree support for iMXQXP AI_ML board
Manivannan Sadhasivam
- [U-Boot] [PATCH v4 2/2] board: Add support for iMX8QXP AI_ML board
Manivannan Sadhasivam
- [U-Boot] [PATCH 1/2] arm: dts: rock960: Enable booting from eMMC when using SPL
Manivannan Sadhasivam
- [U-Boot] [PATCH 2/2] arm: dts: ficus: Enable booting from eMMC when using SPL
Manivannan Sadhasivam
- [U-Boot] [PATCH 1/2] arm: dts: rock960: Enable booting from eMMC when using SPL
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 1/2] arm: dts: rock960: Enable booting from eMMC when using SPL
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 2/2] arm: dts: ficus: Enable booting from eMMC when using SPL
Manivannan Sadhasivam
- [U-Boot] Updating uboot from 2015.04 to 2017.03 - doubts and other questions
Nemanja Savic
- [U-Boot] Updating uboot from 2015.04 to 2017.03 - doubts and other questions
Nemanja Savic
- [U-Boot] Fix read error in fsl_qspi driver
Thomas Schaefer
- [U-Boot] [PATCH 1/2] drivers/spi: fsl_qspi: fix read timeout
Thomas Schaefer
- [U-Boot] [PATCH 2/2] drivers/spi: fsl_qspi: improve timeout calculation
Thomas Schaefer
- [U-Boot] [PATCH 2/2] drivers/spi: fsl_qspi: improve timeout calculation
Thomas Schaefer
- [U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode
Philippe Schenker
- [U-Boot] [PATCH 1/2] colibri/apalis tegra: drop DFU support
Philippe Schenker
- [U-Boot] [PATCH 2/2] colibri/apalis imx: drop DFU support
Philippe Schenker
- [U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode
Philippe Schenker
- [U-Boot] imx7d: CPU core issue in secure mode
Philippe Schenker
- [U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode
Philippe Schenker
- [U-Boot] Antwort: Re: [PATCH v2] board/BuR/brsmarc1: initial commit
Hannes Schmelzer
- [U-Boot] [PATCH v3] board/BuR/brsmarc1: initial commit
Hannes Schmelzer
- [U-Boot] [PATCH v5] board/BuR/zynq/brsmarc2: initial commit
Hannes Schmelzer
- [U-Boot] [PATCH v3] board/BuR/brppt2: initial commit
Hannes Schmelzer
- [U-Boot] [PATCH v4] board/BuR/brsmarc1: initial commit
Hannes Schmelzer
- [U-Boot] [PATCH v3 2/2] xilinx_xiic: Fix transfer initialisation
Heiko Schocher
- [U-Boot] [PATCH v4] gpio: add gpio-hog support
Heiko Schocher
- [U-Boot] [PATCH v5] rtc: pcf2127: Fixed bug with rtc settings and getting error time
Heiko Schocher
- [U-Boot] Pull request: u-boot-ubi/master
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] [PATCH v4] gpio: add gpio-hog support
Heiko Schocher
- [U-Boot] [PATCH v4] gpio: add gpio-hog support
Heiko Schocher
- [U-Boot] [PATCH v1 0/3] rtc, dm: add DM/Kconfig support for RTC_RX8025 driver
Heiko Schocher
- [U-Boot] [PATCH v1 1/3] rtc: move RTC_RX8025 to Kconfig
Heiko Schocher
- [U-Boot] [PATCH v1 2/3] rtc, rx8025: fix Coding Style
Heiko Schocher
- [U-Boot] [PATCH v1 3/3] rtc, rx8025: add DM support
Heiko Schocher
- [U-Boot] [PATCH v1] pci: add DM based mpc85xx driver
Heiko Schocher
- [U-Boot] [PATCH v1] ddr, fsl: add DM_I2C support
Heiko Schocher
- [U-Boot] [PATCH v1 0/5] usb, ohci-hcd: add usb ohci pci DM driver
Heiko Schocher
- [U-Boot] [PATCH v1 1/5] usb, ohci-hdc: fix warning 'ohci_pci_ids' defined but not used
Heiko Schocher
- [U-Boot] [PATCH v1 2/5] usb, ohci: fix ohci swap register access
Heiko Schocher
- [U-Boot] [PATCH v1 3/5] usb, ohci-hcd: set OHCI_USE_NPS if DM_PCI
Heiko Schocher
- [U-Boot] [PATCH v1 4/5] usb, ohci: add warning if none on pci found
Heiko Schocher
- [U-Boot] [PATCH v1 5/5] usb, ohci, pci: add DM support for PCI-based OHCI USB controller
Heiko Schocher
- [U-Boot] [PATCH v1] gpio: fixes for gpio-hog support
Heiko Schocher
- [U-Boot] [PATCH v1 0/5] imx6, display: enhancements for upcoming aristainetos DM support
Heiko Schocher
- [U-Boot] [PATCH v1 1/5] global_data: enable fb_base for DM_VIDEO
Heiko Schocher
- [U-Boot] [PATCH v1 2/5] mxc_ipuv3_fb.c: set gd->fb_base
Heiko Schocher
- [U-Boot] [PATCH v1 3/5] bdinfo: show fb base with DM_VIDEO
Heiko Schocher
- [U-Boot] [PATCH v1 4/5] mxc_ipuv3_fb.c: call display_enable
Heiko Schocher
- [U-Boot] [PATCH v1 5/5] mxc_ipuv3_fb.c: enable a backlight on a panel
Heiko Schocher
- [U-Boot] friendlyARM s5p4418 Migration to Video DM - Splash Screen
Heiko Schocher
- [U-Boot] [PATCH] autoboot: fix bug using with CAAM and AUTOBOOT_ENCRYPTION
Heiko Schocher
- [U-Boot] [PATCH] usb: ehci-omap: Add Support DM_USB and OF_CONTROL
Heiko Schocher
- [U-Boot] [PATCH] usb: ehci-omap: Add Support DM_USB and OF_CONTROL
Heiko Schocher
- [U-Boot] [PATCH] usb: ehci-omap: Add Support DM_USB and OF_CONTROL
Heiko Schocher
- [U-Boot] [BUG] Wandboard fails to boot via U-Boot bootefi, GRUB
Heinrich Schuchardt
- [U-Boot] [BUG] Wandboard fails to boot via U-Boot bootefi, GRUB
Heinrich Schuchardt
- [U-Boot] efi_loader: test_efi_grub_net()
Heinrich Schuchardt
- [U-Boot] [BUG] Wandboard fails to boot via U-Boot bootefi, GRUB
Heinrich Schuchardt
- [U-Boot] [BUG] Wandboard fails to boot via U-Boot bootefi, GRUB
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove superfluous spaces in comments
Heinrich Schuchardt
- [U-Boot] [U-Boot-Board-Maintainers] [U-Boot-Custodians] [ANN] U-Boot v2019.07-rc4 released
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] disk: efi: buffer overflow in part_get_info_efi()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test/py: error message test_efi_selftest_device_tree
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] travis-ci: add qemu-riscv64
Heinrich Schuchardt
- [U-Boot] [RFC] travis-ci: source for grub*.efi
Heinrich Schuchardt
- [U-Boot] efi_loader: test_efi_grub_net()
Heinrich Schuchardt
- [U-Boot] [PATCH v3 00/13] efi_loader: clean up runtime detaching
Heinrich Schuchardt
- [U-Boot] [PATCH v3 01/13] efi_loader: move efi_query_variable_info()
Heinrich Schuchardt
- [U-Boot] [PATCH v3 02/13] efi_loader: initialization of variable services
Heinrich Schuchardt
- [U-Boot] [PATCH v3 03/13] efi_loader: remove NULL entries from runtime detach list
Heinrich Schuchardt
- [U-Boot] [PATCH v3 04/13] efi_loader: clean up runtime detaching
Heinrich Schuchardt
- [U-Boot] [PATCH v3 05/13] efi_loader: let the variable driver patch out the runtime
Heinrich Schuchardt
- [U-Boot] [PATCH v3 06/13] efi_loader: unimplemented runtime services
Heinrich Schuchardt
- [U-Boot] [PATCH v3 07/13] efi_selftest: test variable services at runtime
Heinrich Schuchardt
- [U-Boot] [PATCH v3 08/13] efi_loader: split off detaching SetVirtualAddress()
Heinrich Schuchardt
- [U-Boot] [PATCH v3 09/13] efi_loader: bump UEFI specification number to 2.8
Heinrich Schuchardt
- [U-Boot] [PATCH v3 10/13] test/py: not all boards support UEFI runtime reset
Heinrich Schuchardt
- [U-Boot] [PATCH v3 11/13] efi_loader: decision on EFI_RT_SUPPORTED_RESET_SYSTEM
Heinrich Schuchardt
- [U-Boot] [PATCH v3 12/13] efi_loader: simplify detaching
Heinrich Schuchardt
- [U-Boot] [PATCH v3 13/13] efi_loader: detach runtime in ExitBootServices()
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] disk: efi: buffer overflow in part_get_info_efi()
Heinrich Schuchardt
- [U-Boot] Pull request for UEFI sub-system for v2019.10-rc1
Heinrich Schuchardt
- [U-Boot] [PATCH 0/2] efi_loader: Fix inconsistencies in efi_add_memory_map usage
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: duplicate IMAGE_SUBSYSTEM_EFI_APPLICATION
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: use predefined constants in crt0_*_efi.S
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: duplicate IMAGE_SUBSYSTEM_EFI_APPLICATION
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: do not call CloseEvent() after ExitBootServices()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: efi_set_virtual_address_map_runtime()
Heinrich Schuchardt
- [U-Boot] [PATCH 0/2] efi_loader: EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] efi_loader: EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE
Heinrich Schuchardt
- [U-Boot] [PATCH 2/2] efi_selftest: EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE
Heinrich Schuchardt
- [U-Boot] [RFC 3/6] efi_loader: support convert_pointer at runtime
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: allow adding mapped memory at 0x00000000
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: allow adding mapped memory at 0x00000000
Heinrich Schuchardt
- [U-Boot] [BUG] efi_loader: unaligned access in disk/part_efi.c, cmd/bootefi.c, efi_hii_sibt_string_ucs2_block_next()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: allow adding mapped memory at 0x00000000
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] doc: Cope with Sphinx logging deprecations
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix function comments in efi_boottime.c
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix comments for efi_update_exit_data()
Heinrich Schuchardt
- [U-Boot] [PATCH 0/2] scripts/kernel-doc: update script from Linux 5.2
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] scripts/kernel-doc: update script from Linux 5.2
Heinrich Schuchardt
- [U-Boot] [PATCH 2/2] scripts/kernel-doc: fix parsing of function pointers
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_driver: use Sphinx style comments
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix comments for variable services
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix comment for struct efi_pool_allocation
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix function comments in cmd/bootefi.c
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: function comments efi_bootmgr.c
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: function comments cmd/efi_debug.c
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: add more sources to Sphinx documentation
Heinrich Schuchardt
- [U-Boot] [PATCH] disk: efi: avoid unaligned pointer error
Heinrich Schuchardt
- [U-Boot] [PATCH] disk: efi: avoid unaligned pointer error
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] net: assign maintainer for include/net.h
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] net: unaligned copying of unsigned long
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] lib: uuid: alignment error in gen_rand_uuid()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: allow adding mapped memory at 0x00000000
Heinrich Schuchardt
- [U-Boot] [PATCH v2 0/7] efi_loader: Fix inconsistencies in efi_add_memory_map usage
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/7] efi_loader: Change return type of efi_add_memory_map()
Heinrich Schuchardt
- [U-Boot] [PATCH v3 6/8] efi_loader: Update efi_free_pages() to new efi_add_memory_map()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] lib: uuid: alignment error in gen_rand_uuid()
Heinrich Schuchardt
- [U-Boot] [PATCH v4 1/1] efi_loader: Change return type of efi_add_memory_map()
Heinrich Schuchardt
- [U-Boot] [RFC PATCH 2/9] doc: Add top-level description about U-Boot documentation
Heinrich Schuchardt
- [U-Boot] [RFC PATCH 3/9] doc: Add driver-model to Sphinx TOC tree
Heinrich Schuchardt
- [U-Boot] [RFC PATCH 4/9] doc: driver-model: Convert README.txt to reST
Heinrich Schuchardt
- [U-Boot] [RFC PATCH 5/9] doc: driver-model: Convert MIGRATION.txt to reST
Heinrich Schuchardt
- [U-Boot] [RFC PATCH 6/9] doc: Add architecture specific info to Sphinx TOC tree
Heinrich Schuchardt
- [U-Boot] [RFC PATCH 7/9] doc: arch: Convert README.mips to reST
Heinrich Schuchardt
- [U-Boot] [RFC PATCH 8/9] doc: Add board to Sphinx TOC tree
Heinrich Schuchardt
- [U-Boot] [RFC PATCH 9/9] doc: board: Add Intel Crown Bay board doc
Heinrich Schuchardt
- [U-Boot] [RFC PATCH 1/9] doc: Move existing rst files into api sub-directory
Heinrich Schuchardt
- [U-Boot] [RFC PATCH 0/9] Initial layout for Sphinx HTML docs
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] disk: efi: avoid unaligned pointer error
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] travis-ci: qemu-system-riscv64: Parameter 'id' is missing
Heinrich Schuchardt
- [U-Boot] [RFC PATCH 1/9] doc: Move existing rst files into api sub-directory
Heinrich Schuchardt
- [U-Boot] Pull request for UEFI sub-system for v2019.10-rc1 (2)
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] travis-ci: qemu-system-riscv64: Parameter 'id' is missing
Heinrich Schuchardt
- [U-Boot] [RFC, PATCH v4 16/16] efi_loader: variable: rework with new extended env interfaces
Heinrich Schuchardt
- [U-Boot] [RFC, PATCH v4 00/16] efi_loader: non-volatile variables support
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] travis.yml: run Python tests on qemu-riscv64_defconfig
Heinrich Schuchardt
- [U-Boot] Moving GRUB building to Gitlab CI
Heinrich Schuchardt
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Heinrich Schuchardt
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] efi_loader: usage of cleanup_before_linux()
Heinrich Schuchardt
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Heinrich Schuchardt
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Heinrich Schuchardt
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: always rebuild efi_crt0.o
Heinrich Schuchardt
- [U-Boot] U-Boot build error when switch different SoC without clean
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove efi_exit_caches()
Heinrich Schuchardt
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Heinrich Schuchardt
- [U-Boot] [PATCH 00/50] doc: Shape into useful HTML docs
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] tools/logos: remove black background of U-Boot logo
Heinrich Schuchardt
- [U-Boot] [PATCH] Dockerfile: Build a copy of QEMU and install it under /opt
Heinrich Schuchardt
- [U-Boot] [PATCH] Dockerfile: Build a copy of QEMU and install it under /opt
Heinrich Schuchardt
- [U-Boot] [PATCH] Dockerfile: Build a copy of QEMU and install it under /opt
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] Dockerfile: add python3-sphinx
Heinrich Schuchardt
- [U-Boot] [PATCH] doc: board: Add missing board index.rst files
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] doc: integrate UEFI documentation into Sphinx toctree
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] doc: integrate UEFI documentation into Sphinx toctree
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: re-enable GRUB workaround on 32bit ARM
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] Dockerfile: build GRUB UEFI targets
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] Dockerfile: build GRUB UEFI targets
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] log: document the assign() macro
Heinrich Schuchardt
- [U-Boot] [PATCH 0/4] efi_loader: implement ConvertPointer()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/4] efi_selftest: fix SetVirtualAddressMap unit test
Heinrich Schuchardt
- [U-Boot] [PATCH 2/4] efi_loader: definition of efi_virtual_address_map()
Heinrich Schuchardt
- [U-Boot] [PATCH 3/4] efi_loader: implement ConvertPointer()
Heinrich Schuchardt
- [U-Boot] [PATCH 4/4] efi_selftest: sharpen ConvertPointer() test
Heinrich Schuchardt
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: re-enable GRUB workaround on 32bit ARM
Heinrich Schuchardt
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Heinrich Schuchardt
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Heinrich Schuchardt
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Heinrich Schuchardt
- [U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845
Heinrich Schuchardt
- [U-Boot] [PATCH 3/4] efi_loader: implement ConvertPointer()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] Dockerfile: build GRUB UEFI targets
Heinrich Schuchardt
- [U-Boot] [RFC] tools/buildman/toolchain.py: check signatures
Heinrich Schuchardt
- [U-Boot] [RFC] tools/buildman/toolchain.py: check signatures
Heinrich Schuchardt
- [U-Boot] [PATCH v2 0/4] efi_loader: implement ConvertPointer()
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/4] efi_selftest: fix SetVirtualAddressMap unit test
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/4] efi_loader: definition of efi_virtual_address_map()
Heinrich Schuchardt
- [U-Boot] [PATCH v2 3/4] efi_loader: implement ConvertPointer()
Heinrich Schuchardt
- [U-Boot] [PATCH v2 4/4] efi_selftest: sharpen ConvertPointer() test
Heinrich Schuchardt
- [U-Boot] [PATCH 05/10] bios_emulator: Add some VESA interface debugging
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] clk: meson: remove duplicate logic
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] nand: davinci: avoid out of bounds array access
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test: dm_mdio: avoid out of bounds access
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] test: dm_mdio: avoid out of bounds access
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] drivers: net: pfe_eth: undefined return value
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] rockchip: video: rk3288_hdmi: Add missing call to dw_hdmi_enable()
Niklas Schulze
- [U-Boot] [PATCH 1/1] video: dw_hdmi: Add support for ddc-i2c-bus property
Niklas Schulze
- [U-Boot] [PATCH v2 1/1] video: dw_hdmi: Add support for ddc-i2c-bus property
Niklas Schulze
- [U-Boot] [PATCH] sifive: riscv: update Hifive Unleashed configuration infrastructure
Andreas Schwab
- [U-Boot] [PATCH v2 2/2] regulator: Allow enabling GPIO regulator
Sven Schwermer
- [U-Boot] [PATCH] mips: mt76xx: Implement new d-cache fix in last_stage_init()
Daniel Schwierzeck
- [U-Boot] [PULL] u-boot-mips
Daniel Schwierzeck
- [U-Boot] Remote code execution vulnerabilities in U-Boot's NFS and other IP parsing code
Fermín Serna
- [U-Boot] Remote code execution vulnerabilities in U-Boot's NFS and other IP parsing code
Fermín Serna
- [U-Boot] RPi3B rainbow screen for u-boot v2019.07 rpi_3_32b_defconfig
Victor Seryodkin
- [U-Boot] [PATCH v1 1/3] x86: acpi: Introduce a stub to generate CSRT
Andy Shevchenko
- [U-Boot] [PATCH v1 2/3] x86: acpi: Enable ACPI companion for Intel iDMA 32-bit
Andy Shevchenko
- [U-Boot] [PATCH v1 3/3] x86: tangier: Populate CSRT for shared DMA controller
Andy Shevchenko
- [U-Boot] [PATCH v2 1/4] x86: acpi: Add CSRT description
Andy Shevchenko
- [U-Boot] [PATCH v2 2/4] x86: acpi: Introduce a stub to generate CSRT
Andy Shevchenko
- [U-Boot] [PATCH v2 3/4] x86: acpi: Enable ACPI companion for Intel iDMA 32-bit
Andy Shevchenko
- [U-Boot] [PATCH v2 4/4] x86: tangier: Populate CSRT for shared DMA controller
Andy Shevchenko
- [U-Boot] [PATCH v1 1/3] x86: acpi: Introduce a stub to generate CSRT
Andy Shevchenko
- [U-Boot] [PATCH v4 0/8] x86: Add basic Slim Bootloader payload support
Andy Shevchenko
- [U-Boot] [PATCH v4 0/8] x86: Add basic Slim Bootloader payload support
Andy Shevchenko
- [U-Boot] [PATCH 24/50] doc: board: Add Intel Edison board doc
Andy Shevchenko
- [U-Boot] [PATCH v5 1/8] x86: Add new slimbootloader CPU type
Andy Shevchenko
- [U-Boot] [PATCH v5 3/8] x86: slimbootloader: Add memory configuration
Andy Shevchenko
- [U-Boot] [PATCH v5 4/8] x86: slimbootloader: Add serial driver
Andy Shevchenko
- [U-Boot] [PATCH v5 5/8] x86: slimbootloader: Set TSC information for timer driver
Andy Shevchenko
- [U-Boot] [PATCH v5 7/8] board: intel: Add new slimbootloader board
Andy Shevchenko
- [U-Boot] [PATCH v5 0/8] x86: Add basic Slim Bootloader payload support
Andy Shevchenko
- [U-Boot] [PATCH v5 0/8] x86: Add basic Slim Bootloader payload support
Andy Shevchenko
- [U-Boot] [PATCH v5 3/8] x86: slimbootloader: Add memory configuration
Andy Shevchenko
- [U-Boot] [PATCH v5 7/8] board: intel: Add new slimbootloader board
Andy Shevchenko
- [U-Boot] [PATCH v6 3/8] x86: slimbootloader: Add memory configuration
Andy Shevchenko
- [U-Boot] [PATCH v6 2/8] x86: Add a common HOB library
Andy Shevchenko
- [U-Boot] [PATCH v6 5/8] x86: slimbootloader: Set TSC information for tsc_timer
Andy Shevchenko
- [U-Boot] [PATCH v6 0/8] x86: Add basic Slim Bootloader payload support
Andy Shevchenko
- [U-Boot] [PATCH v6 5/8] x86: slimbootloader: Set TSC information for tsc_timer
Andy Shevchenko
- [U-Boot] [PATCH v7 2/9] x86: lib: fsp: Use EFI_GUID and efi_guid_t
Andy Shevchenko
- [U-Boot] [PATCH v7 3/9] x86: Add a common HOB library
Andy Shevchenko
- [U-Boot] [PATCH v7 4/9] x86: slimbootloader: Add memory configuration
Andy Shevchenko
- [U-Boot] [PATCH 08/15] wdt: dw: Add driver-model support
Andy Shevchenko
- [U-Boot] [PATCH v2] arm: mvebu: set 38x and 39x AVS on lower frequency
Baruch Siach
- [U-Boot] [PATCH] dm: uclass: fix comment copy/paste error
Baruch Siach
- [U-Boot] [PATCH] buildman: fix invocation examples typos
Baruch Siach
- [U-Boot] [PATCH v2] spl: sata: support U-Boot load from raw sata disk
Baruch Siach
- [U-Boot] [PATCH 1/3] spl: mmc: support uboot image offset on main partition
Baruch Siach
- [U-Boot] [PATCH 2/3] arm: mvebu: clearfog: set uboot image SD card offset
Baruch Siach
- [U-Boot] [PATCH 3/3] arm: mvebu: clearfog: update eMMC documentation
Baruch Siach
- [U-Boot] [PATCH] mmc: relocate code comment
Baruch Siach
- [U-Boot] [PATCH] mmc: mv_sdhci: fix uninitialized pointer deref on probe
Baruch Siach
- [U-Boot] [PATCH] mmc: sdhci: fix chip detect gpio property name
Baruch Siach
- [U-Boot] [PATCH] mmd: sdhci: fix non GPIO card detect
Baruch Siach
- [U-Boot] [PATCH] mmc: sdhci: don't invert present state bits
Baruch Siach
- [U-Boot] [PATCH] mmd: sdhci: fix non GPIO card detect
Baruch Siach
- [U-Boot] [PATCH] mmd: sdhci: fix non GPIO card detect
Baruch Siach
- [U-Boot] [PATCH] mmd: sdhci: fix non GPIO card detect
Baruch Siach
- [U-Boot] [PATCH] mmd: sdhci: fix non GPIO card detect
Baruch Siach
- [U-Boot] [PATCH v2 1/3] spl: mmc: support uboot image offset on main partition
Baruch Siach
- [U-Boot] [PATCH v2 2/3] arm: mvebu: clearfog: set uboot image SD card offset
Baruch Siach
- [U-Boot] [PATCH v2 3/3] arm: mvebu: clearfog: update eMMC documentation
Baruch Siach
- [U-Boot] [PATCH PATCH v3 00/12] Add support for applications of overlays in SPL
Michal Simek
- [U-Boot] [PATCH v2 0/5] fpga: collected patches
Michal Simek
- [U-Boot] [GIT PULL] Xilinx/FPGA patches for v2019.10
Michal Simek
- [U-Boot] [PATCH 2/2] mx6: mx6sabre common: Add distro boot config
Sjoerd Simons
- [U-Boot] [PATCH] sunxi: H6: DRAM: Add support for half DQ
Jernej Skrabec
- [U-Boot] [PATCH 0/5] travis: Build and test ASPEED board
Joel Stanley
- [U-Boot] [PATCH 1/5] configs: aspeed: Unset CONFIG_MMC
Joel Stanley
- [U-Boot] [PATCH 2/5] configs: aspeed: Add HUSH and random ethernet addr
Joel Stanley
- [U-Boot] [PATCH 3/5] traivs: Build aspeed boards
Joel Stanley
- [U-Boot] [PATCH 4/5] travis: Add ASPEED ast2500 to qemu tests
Joel Stanley
- [U-Boot] [PATCH 5/5] travis: Build aspeed board with qemu HEAD
Joel Stanley
- [U-Boot] [PATCH v2 0/2] uboot-test-hooks: aspeed ast2500 support
Joel Stanley
- [U-Boot] [PATCH v2 1/2] flash: Script to create a flash image from u-boot
Joel Stanley
- [U-Boot] [PATCH v2 2/2] travis: Add ASPEED AST2500 EVB Qemu
Joel Stanley
- [U-Boot] [PATCH 0/5] travis: Build and test ASPEED board
Joel Stanley
- [U-Boot] [PATCH 3/5] traivs: Build aspeed boards
Joel Stanley
- [U-Boot] [PATCH 3/5] traivs: Build aspeed boards
Joel Stanley
- [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().【请注意,邮件由u-boot-bounces at lists.denx.de代发】 addr_aligned().
Heiko Stuebner
- [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().【请注意,邮件由u-boot-bounces at lists.denx.de代发】 addr_aligned().
Heiko Stübner
- [U-Boot] [PATCH] rockchip: derive ethaddr from cpuid
Heiko Stübner
- [U-Boot] [PATCH] rockchip: derive ethaddr from cpuid
Heiko Stübner
- [U-Boot] Why would ubi attach take 5 hours to complete sometimes?
Ram Subramanian
- [U-Boot] [PATCH 1/8] usb: r8a66597: return -ENOTSUPP from unimplemented submit_int_msg
Michal Suchanek
- [U-Boot] [PATCH 2/8] usb: sl811-hcd: return -ENOTSUPP from unimplemented submit_int_msg
Michal Suchanek
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Michal Suchanek
- [U-Boot] [PATCH 4/8] usb: storage: submit_int_msg -> usb_submit_int_msg
Michal Suchanek
- [U-Boot] [PATCH 5/8] usb: Add nonblock argument to submit_int_msg
Michal Suchanek
- [U-Boot] [PATCH 6/8] usb: add usb_submit_int_msg_nonblock
Michal Suchanek
- [U-Boot] [PATCH 7/8] usb: kbd: use usb_submit_int_msg_nonblock for polling
Michal Suchanek
- [U-Boot] [PATCH 8/8] dwc2: use the nonblock argument in submit_int_msg
Michal Suchanek
- [U-Boot] [PATCH v2 1/9] usb: r8a66597: return -ENOTSUPP from unimplemented submit_int_msg
Michal Suchanek
- [U-Boot] [PATCH v2 2/9] usb: sl811-hcd: return -ENOTSUPP from unimplemented submit_int_msg
Michal Suchanek
- [U-Boot] [PATCH v2 3/9] usb_kdb: only process events succesfully received
Michal Suchanek
- [U-Boot] [PATCH v2 4/9] usb: usb_submit_int_msg -> usb_int_msg
Michal Suchanek
- [U-Boot] [PATCH v2 5/9] usb: storage: submit_int_msg -> usb_int_msg
Michal Suchanek
- [U-Boot] [PATCH v2 6/9] usb: Add nonblock argument to submit_int_msg
Michal Suchanek
- [U-Boot] [PATCH v2 7/9] usb: add usb_int_msg_nonblock
Michal Suchanek
- [U-Boot] [PATCH v2 8/9] usb: kbd: use usb_int_msg_nonblock for polling
Michal Suchanek
- [U-Boot] [PATCH v2 9/9] dwc2: use the nonblock argument in submit_int_msg
Michal Suchanek
- [U-Boot] [PATCH v3 1/7] usb_kdb: only process events succesfully received
Michal Suchanek
- [U-Boot] [PATCH v3 2/7] usb: usb_submit_int_msg -> usb_int_msg
Michal Suchanek
- [U-Boot] [PATCH v3 3/7] usb: storage: submit_int_msg -> usb_int_msg
Michal Suchanek
- [U-Boot] [PATCH v3 4/7] usb: Add nonblock argument to submit_int_msg
Michal Suchanek
- [U-Boot] [PATCH v3 5/7] usb: add usb_int_msg_nonblock
Michal Suchanek
- [U-Boot] [PATCH v3 6/7] usb: kbd: use usb_int_msg_nonblock for polling
Michal Suchanek
- [U-Boot] [PATCH v3 7/7] dwc2: use the nonblock argument in submit_int_msg
Michal Suchanek
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Michal Suchánek
- [U-Boot] [PATCH 6/8] usb: add usb_submit_int_msg_nonblock
Michal Suchánek
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Michal Suchánek
- [U-Boot] [PATCH 6/8] usb: add usb_submit_int_msg_nonblock
Michal Suchánek
- [U-Boot] [PATCH 6/8] usb: add usb_submit_int_msg_nonblock
Michal Suchánek
- [U-Boot] [PATCH 6/8] usb: add usb_submit_int_msg_nonblock
Michal Suchánek
- [U-Boot] [PATCH 6/8] usb: add usb_submit_int_msg_nonblock
Michal Suchánek
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Michal Suchánek
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Michal Suchánek
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Michal Suchánek
- [U-Boot] [PATCH v2 2/9] usb: sl811-hcd: return -ENOTSUPP from unimplemented submit_int_msg
Michal Suchánek
- [U-Boot] [PATCH v2 3/9] usb_kdb: only process events succesfully received
Michal Suchánek
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Michal Suchánek
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Michal Suchánek
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Michal Suchánek
- [U-Boot] [PATCH v2 2/9] usb: sl811-hcd: return -ENOTSUPP from unimplemented submit_int_msg
Michal Suchánek
- [U-Boot] [PATCH v2 5/9] usb: storage: submit_int_msg -> usb_int_msg
Michal Suchánek
- [U-Boot] [PATCH v2 2/9] usb: sl811-hcd: return -ENOTSUPP from unimplemented submit_int_msg
Michal Suchánek
- [U-Boot] [PATCH v2 2/9] usb: sl811-hcd: return -ENOTSUPP from unimplemented submit_int_msg
Michal Suchánek
- [U-Boot] [PATCH v3 1/7] usb_kdb: only process events succesfully received
Michal Suchánek
- [U-Boot] [PATCH v3 2/7] usb: usb_submit_int_msg -> usb_int_msg
Michal Suchánek
- [U-Boot] [PATCH v3 5/7] usb: add usb_int_msg_nonblock
Michal Suchánek
- [U-Boot] [PATCH v3 1/7] usb_kdb: only process events succesfully received
Michal Suchánek
- [U-Boot] [PATCH v3 1/7] usb_kdb: only process events succesfully received
Michal Suchánek
- [U-Boot] 答复: [EXT] Re: Upstreaming usb host drivers for iMX8/iMX8M
Sherry Sun
- [U-Boot] 答复: [PATCH 3/4] SDP: fix wrong usb request size and add high speed endpoint descriptor
Sherry Sun
- [U-Boot] 答复: [EXT] Re: [PATCH 1/4] imx: spl: Change USB boot device type
Sherry Sun
- [U-Boot] 答复: [PATCH 1/4] imx: spl: Change USB boot device type
Sherry Sun
- [U-Boot] 答复: [EXT] Re: Upstreaming usb host drivers for iMX8/iMX8M
Sherry Sun
- [U-Boot] [PATCH 1/5] toradex: configblock: initialize MMC before switching partition
Oleksandr Suvorov
- [U-Boot] [PATCH 2/5] toradex: configblock: generic wi-fi/bt handling
Oleksandr Suvorov
- [U-Boot] [PATCH 3/5] toradex: configblock: fix colibri imx8x target
Oleksandr Suvorov
- [U-Boot] [PATCH 4/5] toradex: configblock: fix apalis imx8 target
Oleksandr Suvorov
- [U-Boot] [PATCH 5/5] toradex: configblock: fix long line
Oleksandr Suvorov
- [U-Boot] [PATCH] colibri-imx6ull: fix vidargs
Oleksandr Suvorov
- [U-Boot] [PATCH v1 2/3] apalis_imx6: configs: remove legacy usbboot command
Oleksandr Suvorov
- [U-Boot] [PATCH v1 1/3] apalis-tk1: configs: remove legacy usbboot command
Oleksandr Suvorov
- [U-Boot] [PATCH v1 3/3] colibri_imx6: configs: remove legacy usbboot command
Oleksandr Suvorov
- [U-Boot] [PATCH 1/6] video: mxsfb: fix mxsfb fbdev binding issues
Oleksandr Suvorov
- [U-Boot] [PATCH 2/6] ARM: dts: colibri_imx7: Fix lcdif node definition
Oleksandr Suvorov
- [U-Boot] [PATCH 3/6] configs: colibri_imx7: enable DM_VIDEO
Oleksandr Suvorov
- [U-Boot] [PATCH 4/6] colibri-imx6ull: support building with DM_VIDEO=y
Oleksandr Suvorov
- [U-Boot] [PATCH 5/6] ARM: dts: colibri-imx6ull: extend lcdif node
Oleksandr Suvorov
- [U-Boot] [PATCH 6/6] configs: colibri-imx6ull: switch to DM_VIDEO
Oleksandr Suvorov
- [U-Boot] [PATCH v2 1/1] colibri_imx7: introduce androidboot wrapper
Oleksandr Suvorov
- [U-Boot] [RFC 1/4] video: fsl_dcu_fb: refactor init functions
Oleksandr Suvorov
- [U-Boot] [PATCH 2/2] imx8qm/qxp: Set SPL TEXT base to OCRAM base
Oleksandr Suvorov
- [U-Boot] [PATCH v1 1/2] common: fdt_support: add support for setting usable memory
Oleksandr Suvorov
- [U-Boot] [PATCH 1/2] imx8: Jump from alias to OCRAM address at SPL init
Oleksandr Suvorov
- [U-Boot] [PATCH v1 2/2] board: colibri_imx7: reserve DDR memory for Cortex-M4
Oleksandr Suvorov
- [U-Boot] [PATCH 1/1] efi_selftest: do not call CloseEvent() after ExitBootServices()
Oleksandr Suvorov
- [U-Boot] [RFC 2/4] video: fsl_dcu_fb: add DM_VIDEO support
Oleksandr Suvorov
- [U-Boot] [RFC 3/4] ARM: dts: colibri_vf: Add dcu0 node
Oleksandr Suvorov
- [U-Boot] [RFC 4/4] colibri_vf: enable DM_VIDEO
Oleksandr Suvorov
- [U-Boot] [PATCH v2 1/3] pinctrl: nxp: DM_FLAG_PRE_RELOC by default
Oleksandr Suvorov
- [U-Boot] [PATCH v2 3/3] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes
Oleksandr Suvorov
- [U-Boot] [PATCH v2 2/3] ARM: dts: imx6ull-colibri: change hierarchy of DTS files
Oleksandr Suvorov
- [U-Boot] [PATCH v3] imx: add u-boot-nand.imx target
Oleksandr Suvorov
- [U-Boot] [PATCH v1] colibri_imx7: provide proper node name to pmic_get
Oleksandr Suvorov
- [U-Boot] [PATCH v1 1/9] apalis-tk1: do not explicitly release reset_moci#
Oleksandr Suvorov
- [U-Boot] [PATCH v1 2/9] apalis-tk1: set apalis gpio 8 aka fan_en
Oleksandr Suvorov
- [U-Boot] [PATCH v1 3/9] apalis-tk1: provide proper USB vendor id
Oleksandr Suvorov
- [U-Boot] [PATCH v1 5/9] apalis-tk1: add pcie_aspm=off to defargs
Oleksandr Suvorov
- [U-Boot] [PATCH v1 6/9] apalis-tk1: switch to zImage
Oleksandr Suvorov
- [U-Boot] [PATCH v1 8/9] apalis-tk1: remove default vesa vga mode from vidargs
Oleksandr Suvorov
- [U-Boot] [PATCH v1 9/9] apalis-tk1: remove non-esential power rails on boot
Oleksandr Suvorov
- [U-Boot] [PATCH v2 0/2] arm: qemu: fix failure if booting from TF-A
AKASHI Takahiro
- [U-Boot] [PATCH v2 1/2] arm: move CONFIG_TFABOOT to generic Kconfig
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/2] arm: qemu: fix failure in flash initialization if booting from TF-A
AKASHI Takahiro
- [U-Boot] [PATCH 1/1] efi_loader: duplicate IMAGE_SUBSYSTEM_EFI_APPLICATION
AKASHI Takahiro
- [U-Boot] [PATCH 1/1] efi_loader: duplicate IMAGE_SUBSYSTEM_EFI_APPLICATION
AKASHI Takahiro
- [U-Boot] [PATCH v2 0/2] arm: qemu: fix failure if booting from TF-A
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 00/16] efi_loader: non-volatile variables support
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 01/16] hashtable: extend interfaces to handle entries with context
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 02/16] env: extend interfaces to import/export U-Boot environment per context
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 03/16] env: extend interfaces to label variable with context
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 04/16] env: flash: add U-Boot environment context support
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 05/16] env: fat: add U-Boot environment context support
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 06/16] env: add variable storage attribute support
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 07/16] env: add/expose attribute helper functions for hashtable
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 08/16] hashtable: import/export entries with flags
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 09/16] hashtable: extend hdelete_ext for autosave
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 10/16] env: save non-volatile variables only
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 11/16] env: save a context immediately if 'autosave' variable is changed
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 12/16] env: extend interfaces to get/set attributes
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 13/16] cmd: env: show variable storage attribute in "env flags" command
AKASHI Takahiro
- [U-Boot] [RFC,PATCH v4 14/16] env: fat: support UEFI context
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 15/16] env, efi_loader: define flags for well-known global UEFI variables
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 16/16] efi_loader: variable: rework with new extended env interfaces
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 00/16] efi_loader: non-volatile variables support
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 16/16] efi_loader: variable: rework with new extended env interfaces
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 00/16] efi_loader: non-volatile variables support
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 01/16] hashtable: extend interfaces to handle entries with context
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 02/16] env: extend interfaces to import/export U-Boot environment per context
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 03/16] env: extend interfaces to label variable with context
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 04/16] env: flash: add U-Boot environment context support
AKASHI Takahiro
- [U-Boot] [RFC, PATCH v4 05/16] env: fat: add U-Boot environment context support
AKASHI Takahiro
- [U-Boot] [PATCH 3/4] efi_loader: implement ConvertPointer()
AKASHI Takahiro
- [U-Boot] [PATCH 01/15] arm: socfpga: agilex: Add base address for Intel Agilex SoC
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 00/15] Add Intel Agilex SoC support
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 01/15] arm: socfpga: agilex: Add base address for Intel Agilex SoC
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 02/15] arm: socfpga: Move firewall code to firewall file
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 03/15] arm: socfpga: Move Stratix10 and Agilex reset manager common code
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 04/15] arm: socfpga: agilex: Add reset manager support
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 05/15] arm: socfpga: Move Stratix10 and Agilex system manager common code
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 06/15] arm: socfpga: agilex: Add system manager support
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 07/15] clk: agilex: Add clock driver for Agilex.
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 08/15] arm: socfpga: agilex: Add clock manager support
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 09/15] arm: socfpga: agilex: Add CCU support for Agilex
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 10/15] ddr: altera: Restructure Stratix 10 SDRAM driver
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 11/15] ddr: altera: agilex: Add SDRAM driver for Agilex
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 12/15] board: intel: agilex: Add socdk board support for Intel Agilex SoC
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 13/15] arm: socfpga: agilex: Add SPL for Agilex SoC
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 14/15] arm: dts: agilex: Add base dtsi and devkit dts
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 15/15] arm: socfpga: agilex: Enable Agilex SoC build
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 14/15] arm: dts: agilex: Add base dtsi and devkit dts
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 03/15] arm: socfpga: Move Stratix10 and Agilex reset manager common code
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 06/15] arm: socfpga: agilex: Add system manager support
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 07/15] clk: agilex: Add clock driver for Agilex.
Ley Foon Tan
- [U-Boot] [RESEND PATCH v2 08/15] arm: socfpga: agilex: Add clock manager support
Ley Foon Tan
- [U-Boot] [PATCH v2] armv8: ls1028a: select BOARD_LATE_INIT config
Yuantian Tang
- [U-Boot] [PATCH] doc: fitImage: Fix conf number incrementation
Mickaël Tansorier
- [U-Boot] [PATCH] doc: fitImage: Cosmetics break lines
Mickaël Tansorier
- [U-Boot] [PATCH] doc: fitImage: Fix conf number incrementation
Mickaël Tansorier
- [U-Boot] [PATCH] doc: fitImage: Cosmetics break lines
Mickaël Tansorier
- [U-Boot] [PATCH 1/2] drivers/spi: fsl_qspi: fix read timeout
Jagan Teki
- [U-Boot] [PATCH 2/2] drivers/spi: fsl_qspi: improve timeout calculation
Jagan Teki
- [U-Boot] [PATCH 2/2] drivers/spi: fsl_qspi: improve timeout calculation
Jagan Teki
- [U-Boot] [PATCH v2 00/99] ram: rk3399: Add LPDDR4 support
Jagan Teki
- [U-Boot] [PATCH v3 7/7] sunxi: H6: Add basic Eachlink H6 Mini support
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH] phy: sun4i-usb: Fix PHY0 routing and passby configuration for MUSB
Jagan Teki
- [U-Boot] [PATCH v4 1/6] mtd: spi-nor: add watchdog reset to flash operation loops
Jagan Teki
- [U-Boot] [PATCH v4 0/6] Add spi-mem driver for MediaTek MT7629 SoC
Jagan Teki
- [U-Boot] [PATCH] spi: spi-mem: Fix read data size issue
Jagan Teki
- [U-Boot] [PATCH] spi: fsl_qspi: Fix flash write issue on i.MX7ULP
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH] phy: sun4i-usb: Fix PHY0 routing and passby configuration for MUSB
Jagan Teki
- [U-Boot] [PATCH v3 1/6] spi: Add SiFive SPI driver
Jagan Teki
- [U-Boot] [PATCH v3 7/7] sunxi: H6: Add basic Eachlink H6 Mini support
Jagan Teki
- [U-Boot] [PATCH v3 7/7] sunxi: H6: Add basic Eachlink H6 Mini support
Jagan Teki
- [U-Boot] [PATCH v3 0/7] sunxi: Add H6 DDR3 DRAM support
Jagan Teki
- [U-Boot] [PATCH v3 00/15] ram: rk3399: Code cleanup
Jagan Teki
- [U-Boot] [PATCH v3 01/15] ram: rk3399: Fix code warnings
Jagan Teki
- [U-Boot] [PATCH v3 02/15] ram: rk3399: Some trivial code fixes
Jagan Teki
- [U-Boot] [PATCH v3 03/15] ram: rk3399: s/sdram_params/params
Jagan Teki
- [U-Boot] [PATCH v3 04/15] ram: rk3399: Handle pctl_cfg return type
Jagan Teki
- [U-Boot] [PATCH v3 05/15] ram: rk3399: s/tsel_wr_select_n/tsel_wr_select_dq_n
Jagan Teki
- [U-Boot] [PATCH v3 06/15] ram: rk3399: s/tsel_wr_select_p/tsel_wr_select_dq_p
Jagan Teki
- [U-Boot] [PATCH v3 07/15] ram: rk3399: s/ca_tsel_wr_select_n/tsel_wr_select_ca_n
Jagan Teki
- [U-Boot] [PATCH v3 08/15] ram: rk3399: s/ca_tsel_wr_select_p/tsel_wr_select_ca_p
Jagan Teki
- [U-Boot] [PATCH v3 09/15] ram: rk3399: Order tsel variables
Jagan Teki
- [U-Boot] [PATCH v3 10/15] ram: rockchip: rk3399: Add cap_info structure
Jagan Teki
- [U-Boot] [PATCH v3 11/15] ram: rk3399: s/rk3399_base_params/sdram_base_params
Jagan Teki
- [U-Boot] [PATCH v3 12/15] ram: rk3399: Move common sdram structures in common header
Jagan Teki
- [U-Boot] [PATCH v3 13/15] arm: include: rockchip: Move dramtypes to common header
Jagan Teki
- [U-Boot] [PATCH v3 14/15] arm: include: rockchip: Add DDR4 enum
Jagan Teki
- [U-Boot] [PATCH v3 15/15] clk: rockchip: rk3399: Fix check patch warnings and checks
Jagan Teki
- [U-Boot] [PATCH v3 00/18] ram: rk3399: Add rank detection
Jagan Teki
- [U-Boot] [PATCH v3 01/18] ram: rk3399: Handle data training return types
Jagan Teki
- [U-Boot] [PATCH v3 02/18] ram: rk3399: Clear PI_175 interrupts in data training
Jagan Teki
- [U-Boot] [PATCH v3 03/18] ram: rk3399: Use rank mask in ca data training
Jagan Teki
- [U-Boot] [PATCH v3 04/18] ram: rk3399: Use rank mask in wdql data training
Jagan Teki
- [U-Boot] [PATCH v3 05/18] ram: rk3399: Add phy pctrl reset support
Jagan Teki
- [U-Boot] [PATCH v3 06/18] ram: rk3399: Move pwrup_srefresh_exit to dram_info
Jagan Teki
- [U-Boot] [PATCH v3 07/18] ram: rk3399: Add pctl start support
Jagan Teki
- [U-Boot] [PATCH v3 08/18] ram: rockchip: Add initial Kconfig
Jagan Teki
- [U-Boot] [PATCH v3 09/18] debug_uart: Add printdec
Jagan Teki
- [U-Boot] [PATCH v3 10/18] ram: rockchip: Add debug sdram driver
Jagan Teki
- [U-Boot] [PATCH v3 11/18] ram: rockchip: debug: Add sdram_print_ddr_info
Jagan Teki
- [U-Boot] [PATCH v3 12/18] ram: rockchip: debug: Get the cs capacity
Jagan Teki
- [U-Boot] [PATCH v3 13/18] ram: rk3399: debug: Add sdram_print_stride
Jagan Teki
- [U-Boot] [PATCH v3 14/18] ram: rk3399: Compute stride for 2 channels
Jagan Teki
- [U-Boot] [PATCH v3 15/18] ram: rk3399: Compute stride for 1 channel a
Jagan Teki
- [U-Boot] [PATCH v3 16/18] ram: rk3399: Add rank detection support
Jagan Teki
- [U-Boot] [PATCH v3 17/18] ram: rk3399: Enable sdram debug functions
Jagan Teki
- [U-Boot] [PATCH v3 18/18] rockchip: dts: rk3399: nanopi-neo4: Use DDR3-1866 dtsi
Jagan Teki
- [U-Boot] [PATCH v4 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Jagan Teki
- [U-Boot] [PATCH v4 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Jagan Teki
- [U-Boot] [PATCH v1] imx: add u-boot-nand.imx target
Jagan Teki
- [U-Boot] [PATCH v4 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Jagan Teki
- [U-Boot] [PATCH v4 0/6] Add spi-mem driver for MediaTek MT7629 SoC
Jagan Teki
- [U-Boot] [PATCH v2 0/5] sunxi: H6: Enable USB (2.0) support
Jagan Teki
- [U-Boot] [PATCH v2 0/5] sunxi: H6: Enable USB (2.0) support
Jagan Teki
- [U-Boot] [PATCH] spi: spi-mem: Fix read data size issue
Jagan Teki
- [U-Boot] [PATCH] drivers: mtd :spi: Enable 4B opcodes for SPANSION s25fl512s
Jagan Teki
- [U-Boot] [PATCH v3 00/57] ram: rk3399: Add LPDDR4 support
Jagan Teki
- [U-Boot] [PATCH v3 01/57] ram: rk3399: Add ddrtype enc macro
Jagan Teki
- [U-Boot] [PATCH v3 02/57] ram: rk3399: Add channel number encoder macro
Jagan Teki
- [U-Boot] [PATCH v3 03/57] ram: rk3399: Add row_3_4 enc macro
Jagan Teki
- [U-Boot] [PATCH v3 04/57] ram: rk3399: Add chipinfo macro
Jagan Teki
- [U-Boot] [PATCH v3 05/57] ram: rk3399: Add rank enc macro
Jagan Teki
- [U-Boot] [PATCH v3 06/57] ram: rk3399: Add column enc macro
Jagan Teki
- [U-Boot] [PATCH v3 07/57] ram: rk3399: Add bk enc macro
Jagan Teki
- [U-Boot] [PATCH v3 08/57] ram: rk3399: Add dbw enc macro
Jagan Teki
- [U-Boot] [PATCH v3 09/57] ram: rk3399: Add cs0_rw macro
Jagan Teki
- [U-Boot] [PATCH v3 10/57] ram: rk3399: Add cs1_rw macro
Jagan Teki
- [U-Boot] [PATCH v3 11/57] ram: rk3399: Add bw enc macro
Jagan Teki
- [U-Boot] [PATCH v3 12/57] ram: rk3399: Rename sys_reg with sys_reg2
Jagan Teki
- [U-Boot] [PATCH v3 13/57] ram: rk3399: Update cs0_row to use sys_reg3
Jagan Teki
- [U-Boot] [PATCH v3 14/57] ram: rk3399: Update cs1_row to use sys_reg3
Jagan Teki
- [U-Boot] [PATCH v3 15/57] ram: rk3399: Add cs1_col enc macro
Jagan Teki
- [U-Boot] [PATCH v3 16/57] ram: rk3399: Add ddr version enc macro
Jagan Teki
- [U-Boot] [PATCH v3 17/57] ram: rk3399: Add ddrtimingC0
Jagan Teki
- [U-Boot] [PATCH v3 18/57] ram: rk3399: Add DdrMode
Jagan Teki
- [U-Boot] [PATCH v3 19/57] ram: rk3399: Configure phy IO in ds odt
Jagan Teki
- [U-Boot] [PATCH v3 20/57] ram: rockchip: Kconfig: Add RK3399 LPDDR4 entry
Jagan Teki
- [U-Boot] [PATCH v3 21/57] ram: rk3399: Add lpddr4 rank mask for ca training
Jagan Teki
- [U-Boot] [PATCH v3 22/57] ram: rk3399: Add lpddr4 rank mask for wdql training
Jagan Teki
- [U-Boot] [PATCH v3 23/57] ram: rk3399: Move mode_sel assignment
Jagan Teki
- [U-Boot] [PATCH v3 24/57] ram: rk3399: Don't wait for PLL lock in lpddr4
Jagan Teki
- [U-Boot] [PATCH v3 25/57] ram: rk3399: Avoid two channel ZQ Cal Start at the same time
Jagan Teki
- [U-Boot] [PATCH v3 26/57] ram: rk3399: Configure PHY_898, PHY_919 for lpddr4
Jagan Teki
- [U-Boot] [PATCH v3 27/57] ram: rk3399: Configure BOOSTP_EN, BOOSTN_EN for lpddr4
Jagan Teki
- [U-Boot] [PATCH v3 28/57] ram: rk3399: Configure SLEWP_EN, SLEWN_EN for lpddr4
Jagan Teki
- [U-Boot] [PATCH v3 29/57] ram: rk3399: Configure PHY RX_CM_INPUT for lpddr4
Jagan Teki
- [U-Boot] [PATCH v3 30/57] ram: rk3399: Map chipselect for lpddr4
Jagan Teki
- [U-Boot] [PATCH v3 31/57] ram: rk3399: Configure tsel write ca for lpddr4
Jagan Teki
- [U-Boot] [PATCH v3 32/57] ram: rk3399: Don't disable dfi dram clk for lpddr4, rank 1
Jagan Teki
- [U-Boot] [PATCH v3 33/57] ram: rk3399: Add IO settings
Jagan Teki
- [U-Boot] [PATCH v3 34/57] ram: sdram: Configure lpddr4 tsel rd, wr based on IO settings
Jagan Teki
- [U-Boot] [PATCH v3 35/57] ram: rk3399: Add tsel control clock drive
Jagan Teki
- [U-Boot] [PATCH v3 36/57] ram: rk3399: Configure soc odt support
Jagan Teki
- [U-Boot] [PATCH v3 37/57] ram: rk3399: Get lpddr4 tsel_rd_en from io settings
Jagan Teki
- [U-Boot] [PATCH v3 38/57] ram: rk3399: Update lpddr4 vref based on io settings
Jagan Teki
- [U-Boot] [PATCH v3 39/57] ram: rk3399: Update lpddr4 mode_sel based on io settings
Jagan Teki
- [U-Boot] [PATCH v3 40/57] ram: rk3399: Update lpddr4 vref_mode_ac
Jagan Teki
- [U-Boot] [PATCH v3 41/57] ram: rk3399: Simplify data training first argument
Jagan Teki
- [U-Boot] [PATCH v3 42/57] ram: rk3399: Handle data training via ops
Jagan Teki
- [U-Boot] [PATCH v3 43/57] ram: rk3399: Add LPPDR4 mr detection
Jagan Teki
- [U-Boot] [PATCH v3 44/57] arm: include: rockchip: Add rk3399 pmu file
Jagan Teki
- [U-Boot] [PATCH v3 45/57] rockchip: rk3399: syscon: Add pmu support
Jagan Teki
- [U-Boot] [PATCH v3 46/57] rockchip: dts: rk3399: Add u-boot, dm-pre-reloc for pmu
Jagan Teki
- [U-Boot] [PATCH v3 47/57] clk: rockchip: rk3399: Set 50MHz ddr clock
Jagan Teki
- [U-Boot] [PATCH v3 48/57] clk: rockchip: rk3399: Set 400MHz ddr clock
Jagan Teki
- [U-Boot] [PATCH v3 49/57] ram: rk3399: Add LPPDDR4-400 timings inc
Jagan Teki
- [U-Boot] [PATCH v3 50/57] ram: rk3399: Add LPPDDR4-800 timings inc
Jagan Teki
- [U-Boot] [PATCH v3 51/57] ram: rk3399: Add set_rate sdram rk3399 ops
Jagan Teki
- [U-Boot] [PATCH v3 52/57] ram: rk3399: Add lpddr4 set rate support
Jagan Teki
- [U-Boot] [PATCH v3 53/57] configs: rockpro64: Enable LPDDR4 support
Jagan Teki
- [U-Boot] [PATCH v3 54/57] configs: rock-pi-4: Enable LPDDR4 support
Jagan Teki
- [U-Boot] [PATCH v3 55/57] rockchip: dts: rk3399: Add LPDDR4-100 timings
Jagan Teki
- [U-Boot] [PATCH v3 56/57] rockchip: dts: rk3399: rockpro64: Use LPDDR4-100 dtsi
Jagan Teki
- [U-Boot] [PATCH v3 57/57] rockchip: dts: rk3399: rock-pi-4: Use LPDDR4-100 dtsi
Jagan Teki
- [U-Boot] [PATCH] rockchip: dts: rk3399: Add 'same-as-spl' for Rock PI 4
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] [PATCH v5 2/4] spi: Add SiFive SPI driver
Jagan Teki
- [U-Boot] [PATCH v5 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Jagan Teki
- [U-Boot] [PATCH v5 3/4] riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
Jagan Teki
- [U-Boot] [PATCH v5 0/4] SiFive SPI MMC Support
Jagan Teki
- [U-Boot] [PATCH v5 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Jagan Teki
- [U-Boot] [PATCH v6 2/4] spi: Add SiFive SPI driver
Jagan Teki
- [U-Boot] [PATCH v5 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Jagan Teki
- [U-Boot] [PATCH v5 0/4] SiFive SPI MMC Support
Jagan Teki
- [U-Boot] [PATCH v3 16/18] ram: rk3399: Add rank detection support
Jagan Teki
- [U-Boot] [PATCH v5 1/4] mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
Jagan Teki
- [U-Boot] [Patch V3] drivers: mtd: spi: Add flash property for Micron mt25qu512a
Jagan Teki
- [U-Boot] [Patch V3] drivers: mtd: spi: Add micron mt35xu512g and mt35xu02g flash ID
Jagan Teki
- [U-Boot] [Patch V3] drivers: mtd :spi: Enable 4B opcodes for SPANSION s25fl512s
Jagan Teki
- [U-Boot] [EXT] Re: [Patch V3] drivers: mtd :spi: Enable 4B opcodes for SPANSION s25fl512s
Jagan Teki
- [U-Boot] [Patch v4] drivers: mtd: spi: Add micron mt35xu512a and mt35xu02g flash ID
Jagan Teki
- [U-Boot] [EXT] Re: [Patch v4] drivers: mtd: spi: Add micron mt35xu512a and mt35xu02g flash ID
Jagan Teki
- [U-Boot] [EXT] Re: [Patch v4] drivers: mtd: spi: Add micron mt35xu512a and mt35xu02g flash ID
Jagan Teki
- [U-Boot] [Patch v5] drivers: mtd: spi: Add micron mt35xu512a and mt35xu02g flash ID
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH] rockchip: sdhci: Fix sdhci mmc driver probe abort
Jagan Teki
- [U-Boot] [PATCH v4 16/18] ram: rk3399: Add rank detection support
Jagan Teki
- [U-Boot] [PATCH v4 17/18] ram: rk3399: Enable sdram debug functions
Jagan Teki
- [U-Boot] [PATCH v4 0/6] Add spi-mem driver for MediaTek MT7629 SoC
Jagan Teki
- [U-Boot] [EXT] Re: [Patch V3] drivers: mtd :spi: Enable 4B opcodes for SPANSION s25fl512s
Jagan Teki
- [U-Boot] [PATCH v5 3/5] arm: dts: change MT7629 to use spi-mem rather than qspi
Jagan Teki
- [U-Boot] [PATCH v5 2/5] spi: add spi-mem driver for MediaTek MT7629 SoC
Jagan Teki
- [U-Boot] [PATCH v5 1/5] spi: remove obsolete mtk_qspi driver
Jagan Teki
- [U-Boot] [PATCH 1/3] spi: Add spi_write_then_read
Jagan Teki
- [U-Boot] [PATCH 2/3] mtd: spi_dataflash: Use spi read then write
Jagan Teki
- [U-Boot] [PATCH 3/3] mtd: spi: Drop sf.c
Jagan Teki
- [U-Boot] Pull request v2: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH 00/15] rk3399: Add redundant boot support
Jagan Teki
- [U-Boot] [PATCH 01/15] arm: rockchip: Add common cru.h
Jagan Teki
- [U-Boot] [PATCH 02/15] rockchip: Add cpu-info
Jagan Teki
- [U-Boot] [PATCH 03/15] rockchip: rk3288: Print reset reason
Jagan Teki
- [U-Boot] [PATCH 04/15] rockchip: Add common reset reason
Jagan Teki
- [U-Boot] [PATCH 05/15] rockchip: rk3288/rk3399: Enable DISPLAY_CPUINFO
Jagan Teki
- [U-Boot] [PATCH 06/15] wdt: designware: Simplify is_enabled function
Jagan Teki
- [U-Boot] [PATCH 07/15] wdt: designware: Simplify enable function
Jagan Teki
- [U-Boot] [PATCH 08/15] wdt: dw: Add driver-model support
Jagan Teki
- [U-Boot] [PATCH 09/15] wdt: dw: Rename to dw_wdt.c
Jagan Teki
- [U-Boot] [PATCH 10/15] rockchip: dts: rk3399: Add u-boot, dm-pre-reloc for watchdog
Jagan Teki
- [U-Boot] [PATCH 11/15] wdt: Kconfig: Add WDT_DW entry
Jagan Teki
- [U-Boot] [PATCH 12/15] include: rk3399: Disable watchdog in TPL
Jagan Teki
- [U-Boot] [DO NOT MERGE] [PATCH 13/15] rk3399: rockpro64: Enable watchdog
Jagan Teki
- [U-Boot] [PATCH 14/15] rockchip: rk3399: Add bootcount support
Jagan Teki
- [U-Boot] [DO NOT MERGE] [PATCH 15/15] rk3399: rockpro64: Enable bootcount
Jagan Teki
- [U-Boot] [PATCH v2 16/16] ARM: dts: stm32mp1: sync device tree with v5.2-rc4
Pierre-Jean Texier
- [U-Boot] [PATCH v2 14/16] stm32mp1: add check for presence of environment in boot device
Pierre-Jean Texier
- [U-Boot] [PATCH v2 01/16] stm32mp1: deactivate WATCHDOG in defconfig
Pierre-Jean Texier
- [U-Boot] [PATCH] pinctrl: renesas: r8a7796: Fix PRESET# bias setting
Shunsuke Tokumoto
- [U-Boot] [PATCH v3 2/2] xilinx_xiic: Fix transfer initialisation
Melin Tomas
- [U-Boot] [PATCH 4/4] rockchip: remove redundant pinctrl header including
Philipp Tomsich
- [U-Boot] [PATCH V2 41/51] spl: pass args to board_return_to_bootrom
Philipp Tomsich
- [U-Boot] [PATCH 3/3] board: puma: Use rockchip_* helpers to setup cpuid and macaddr
Philipp Tomsich
- [U-Boot] [PATCH 1/1] rockchip: video: rk3288_hdmi: Add missing call to dw_hdmi_enable()
Philipp Tomsich
- [U-Boot] [PATCH v3 3/3] board: puma: Use rockchip_* helpers to setup cpuid and macaddr【请注意,邮件由u-boot-bounces at lists.denx.de代发】 setup cpuid and macaddr
Philipp Tomsich
- [U-Boot] [PATCH] net: sun8i_emac: Test the correct phy
Emmanuel Vadot
- [U-Boot] question about spi flash driver for large ST micro
Valero, Miguel
- [U-Boot] [PATCH V2 1/2] watchdog: Split WDT from SPL_WDT
Marek Vasut
- [U-Boot] [PATCH 1/3] ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite
Marek Vasut
- [U-Boot] [RESEND PATCH v3 13/18] usb: dwc3: Kconfig: get rid of obsolete mode selection
Marek Vasut
- [U-Boot] [PATCH 1/8] usb: r8a66597: return -ENOTSUPP from unimplemented submit_int_msg
Marek Vasut
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Marek Vasut
- [U-Boot] [PATCH 6/8] usb: add usb_submit_int_msg_nonblock
Marek Vasut
- [U-Boot] [RESEND PATCH v3 13/18] usb: dwc3: Kconfig: get rid of obsolete mode selection
Marek Vasut
- [U-Boot] [PATCH v3 1/3] ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite
Marek Vasut
- [U-Boot] [PATCH v3 2/3] ARM: dts: imx: dh-imx6: Add DHCOM iMX6 Duallite PDK2 device tree
Marek Vasut
- [U-Boot] [PATCH v3 3/3] ARM: imx6: DHCOM i.MX6 PDK: config SPL to load U-Boot fitImage with mulitple DTs
Marek Vasut
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Marek Vasut
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Marek Vasut
- [U-Boot] [U-Boot-Custodians] [U-Boot-Board-Maintainers] [ANN] U-Boot v2019.07-rc4 released
Marek Vasut
- [U-Boot] What if ATF can be part of U-Boot source, like SPL?
Marek Vasut
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Marek Vasut
- [U-Boot] [PATCH v2 2/9] usb: sl811-hcd: return -ENOTSUPP from unimplemented submit_int_msg
Marek Vasut
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Marek Vasut
- [U-Boot] [PATCH v2 2/9] usb: sl811-hcd: return -ENOTSUPP from unimplemented submit_int_msg
Marek Vasut
- [U-Boot] [PATCH 1/2] usb: musb-new: Add DA8xx MUSB Glue and enable Host mode
Marek Vasut
- [U-Boot] [PATCH 1/2] usb: musb-new: Add DA8xx MUSB Glue and enable Host mode
Marek Vasut
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Marek Vasut
- [U-Boot] [PATCH] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
Marek Vasut
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Marek Vasut
- [U-Boot] [RESEND PATCH v3 13/18] usb: dwc3: Kconfig: get rid of obsolete mode selection
Marek Vasut
- [U-Boot] [PATCH] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
Marek Vasut
- [U-Boot] [PATCH 3/8] usb_kdb: only process events succesfully received
Marek Vasut
- [U-Boot] [PATCH v2 2/9] usb: sl811-hcd: return -ENOTSUPP from unimplemented submit_int_msg
Marek Vasut
- [U-Boot] [PATCH v2 2/9] usb: sl811-hcd: return -ENOTSUPP from unimplemented submit_int_msg
Marek Vasut
- [U-Boot] [PATCH v3 1/7] usb_kdb: only process events succesfully received
Marek Vasut
- [U-Boot] [PATCH v3 5/7] usb: add usb_int_msg_nonblock
Marek Vasut
- [U-Boot] [PATCH v1 0/3] Fixes for the DWC3-generic glue driver
Marek Vasut
- [U-Boot] [RESEND PATCH v3 13/18] usb: dwc3: Kconfig: get rid of obsolete mode selection
Marek Vasut
- [U-Boot] [PATCH v2] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH v2] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
Marek Vasut
- [U-Boot] [PATCH v3] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
Marek Vasut
- [U-Boot] [PATCH] ARM: renesas: Update Gen3 PCIe dma-ranges before boot
Marek Vasut
- [U-Boot] [PATCH] common: fdt_support: Add missing cpu_to_fdt32() to fdt_pci_dma_ranges()
Marek Vasut
- [U-Boot] [PATCH V2] ARM: renesas: Update Gen3 PCIe dma-ranges before boot
Marek Vasut
- [U-Boot] [PATCH] common: fdt_support: Add missing cpu_to_fdt32() to fdt_pci_dma_ranges()
Marek Vasut
- [U-Boot] [PATCH] FIX: ARM: IMX: Add compatible 'fsl, imx53-uart' to NXP's serial driver
Marek Vasut
- [U-Boot] [PATCH] FIX: ARM: IMX: Add compatible 'fsl, imx53-uart' to NXP's serial driver
Marek Vasut
- [U-Boot] [PATCH v2] serial: mxc: Add compatibles to NXP's serial driver (for imx21 and imx53)
Marek Vasut
- [U-Boot] [RESEND PATCH v2 04/15] arm: socfpga: agilex: Add reset manager support
Marek Vasut
- [U-Boot] [RESEND PATCH v2 04/15] arm: socfpga: agilex: Add reset manager support
Marek Vasut
- [U-Boot] [PATCH V2 2/3] usb: musb-new: Add support for da8xx-musb
Marek Vasut
- [U-Boot] [PATCH v2] arm: socfpga: do not reboot via SRAM
Marek Vasut
- [U-Boot] [PATCH v3 2/4] sysreset: socfpga: gen5: add sysreset driver
Marek Vasut
- [U-Boot] [PATCH v3 5/7] usb: add usb_int_msg_nonblock
Marek Vasut
- [U-Boot] [PATCH v3 1/7] usb_kdb: only process events succesfully received
Marek Vasut
- [U-Boot] [PATCH v2] arm: socfpga: fix 3 boards missing env var "socfpga_legacy_reset_compat"
Marek Vasut
- [U-Boot] [PATCH 1/2] dm: ddr: socfpga: fix gen5 ddr driver to not use bss
Marek Vasut
- [U-Boot] [PATCH 2/2] arm: socfpga: gen5: don't zero bss in board_init_f()
Marek Vasut
- [U-Boot] [PATCH v2] arm: socfpga: do not reboot via SRAM
Marek Vasut
- [U-Boot] [PATCH 2/2] arm: socfpga: gen5: don't zero bss in board_init_f()
Marek Vasut
- [U-Boot] [PATCH v2] arm: socfpga: do not reboot via SRAM
Marek Vasut
- [U-Boot] [PATCH v3 1/7] usb_kdb: only process events succesfully received
Marek Vasut
- [U-Boot] [PATCH 2/3] USB: host: Add the USB3 host driver
Marek Vasut
- [U-Boot] [PATCH v4 1/4] arm: socfpga: rst: add register definition for cold reset
Marek Vasut
- [U-Boot] [PATCH] fpga: arria10: Fix error in fpga pin configuration
Marek Vasut
- [U-Boot] [PATCH v4] spl: kconfig: separate sysreset and firmware drivers from misc
Marek Vasut
- [U-Boot] [PATCH V2 2/3] usb: musb-new: Add support for da8xx-musb
Marek Vasut
- [U-Boot] [PATCH v1 0/5] usb, ohci-hcd: add usb ohci pci DM driver
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (22.07.2019)
Marek Vasut
- [U-Boot] R-Car-gpio0_00-fails-with-“gpio input” command
Marek Vasut
- [U-Boot] [PATCH v4 1/4] arm: socfpga: rst: add register definition for cold reset
Marek Vasut
- [U-Boot] [PATCH v4 1/4] arm: socfpga: rst: add register definition for cold reset
Marek Vasut
- [U-Boot] [PATCH v4 1/4] arm: socfpga: rst: add register definition for cold reset
Marek Vasut
- [U-Boot] [PATCH 4/6] arm: socfpga: gen5: move initial reset handling to reset driver
Marek Vasut
- [U-Boot] [PATCH 3/6] timer: dw-apb: add reset handling
Marek Vasut
- [U-Boot] [PATCH 5/6] arm: socfpga: gen5: add readonly clk driver
Marek Vasut
- [U-Boot] [PATCH 3/6] timer: dw-apb: add reset handling
Marek Vasut
- [U-Boot] [PATCH 5/6] arm: socfpga: gen5: add readonly clk driver
Marek Vasut
- [U-Boot] [PATCH 5/6] arm: socfpga: gen5: add readonly clk driver
Marek Vasut
- [U-Boot] [PATCH 3/6] timer: dw-apb: add reset handling
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (22.07.2019)
Marek Vasut
- [U-Boot] 答复: R-Car-gpio0_00-fails-with-“gpio input” command
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (22.07.2019)
Marek Vasut
- [U-Boot] [PATCH] pinctrl: renesas: fix R-Car gpio0_00 operation fails with 'gpio -input' command
Marek Vasut
- [U-Boot] [PATCH] usb: ehci-omap: Add Support DM_USB and OF_CONTROL
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PATCH] usb: ehci-omap: Add Support DM_USB and OF_CONTROL
Marek Vasut
- [U-Boot] [PATCH] usb: ehci-omap: Add Support DM_USB and OF_CONTROL
Marek Vasut
- [U-Boot] [PATCH] usb: ehci-omap: Add Support DM_USB and OF_CONTROL
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [PATCH 1/7] net: sh_eth: Add R8A77980 V3H gether support
Marek Vasut
- [U-Boot] [PATCH 2/7] net: sh_eth: Fix 64bit build warnings
Marek Vasut
- [U-Boot] [PATCH 3/7] pinctrl: renesas: Add R8A77980 V3H PFC tables
Marek Vasut
- [U-Boot] [PATCH 4/7] clk: renesas: Add R8A77980 V3H clock tables
Marek Vasut
- [U-Boot] [PATCH 5/7] ARM: dts: renesas: Add R8A77980 V3H DTs and headers
Marek Vasut
- [U-Boot] [PATCH 6/7] ARM: renesas: Add R8A77980 V3H platform code
Marek Vasut
- [U-Boot] [PATCH 7/7] ARM: renesas: Add R8A77980 V3H Condor board code
Marek Vasut
- [U-Boot] [PATCH] sf: Add support for Macronix mx25u12835f
Vladimir Vid
- [U-Boot] [PATCH v6 5/5] configs: am65x_evm_a53: enable networking
Lokesh Vutla
- [U-Boot] [PATCH v6 5/5] configs: am65x_evm_a53: enable networking
Lokesh Vutla
- [U-Boot] [PATCH v3] spl: kconfig: separate sysreset and firmware drivers from misc
Lokesh Vutla
- [U-Boot] [PATCH] arm: mach-keystone: Use appended original image size in image processing
Lokesh Vutla
- [U-Boot] [PATCH 2/2] arm: am57xx: Allow bootm to load larger kernels
Lokesh Vutla
- [U-Boot] [PATCH 1/2] env: ti: Increase boot partition
Lokesh Vutla
- [U-Boot] [PATCH] arm: ti: boot: Remove legacy Android partitions
Lokesh Vutla
- [U-Boot] [PATCH] arm: ti: boot: Increase system partition size
Lokesh Vutla
- [U-Boot] [PATCH v2] arm: mach-keystone: Use appended original image size in image processing
Lokesh Vutla
- [U-Boot] [PATCH v4] spl: kconfig: separate sysreset and firmware drivers from misc
Lokesh Vutla
- [U-Boot] [PATCH] remoteproc: Fix potential build issues with SPL remoteproc
Lokesh Vutla
- [U-Boot] [PATCH v2 1/2] dm: core: device: switch off power domain after device removal
Lokesh Vutla
- [U-Boot] [PATCH v2 05/12] armV7R: K3: am654: Allow using SPL BSS pre-relocation
Lokesh Vutla
- [U-Boot] [PATCH v2 05/12] armV7R: K3: am654: Allow using SPL BSS pre-relocation
Lokesh Vutla
- [U-Boot] [PATCH] spl_mmc: always use find_mmc_device() to get mmc handler
Lokesh Vutla
- [U-Boot] [PATCH] arm: dts: k3-am654-base-board: Fix cpsw_nuss power-domains property
Lokesh Vutla
- [U-Boot] [PATCH 1/2] configs: am65x_evm_a53: Disable K3_SYSTEM_CONTROLLER
Lokesh Vutla
- [U-Boot] [PATCH 1/2] configs: am65x_evm_a53: Disable K3_SYSTEM_CONTROLLER
Lokesh Vutla
- [U-Boot] [PATCH] clk: sifive: fu540-prci: align primary DT match string to the DT bindings
Paul Walmsley
- [U-Boot] [PATCH] armv8: ls1046afrwy: Define CONFIG_ENV_ADDR for QSPI Boot
Alison Wang
- [U-Boot] [PATCH 1/2] arm64: add an option to switch visibility of CONFIG_SYS_INIT_SP_BSS_OFFSET
Stephen Warren
- [U-Boot] [PATCH] test/py: gpt: Use long options for sgdisk
Stephen Warren
- [U-Boot] test.py failure in test_ut[ut_dm_pci_ep_base]
Stephen Warren
- [U-Boot] [PATCH 1/1] travis-ci: add qemu-riscv64
Stephen Warren
- [U-Boot] [PATCH] ARM: bcm283x mbox: Fix send status register
Stephen Warren
- [U-Boot] [PATCH v2 1/2] flash: Script to create a flash image from u-boot
Stephen Warren
- [U-Boot] [PATCH 1/1] travis-ci: qemu-system-riscv64: Parameter 'id' is missing
Stephen Warren
- [U-Boot] 32-bit Tegra build failure in u-boot-dm
Stephen Warren
- [U-Boot] test.py failure in test_ut[ut_dm_pci_ep_base]
Stephen Warren
- [U-Boot] [PATCH] Makefile: fix implementation of BINMAN_DEBUG
Stephen Warren
- [U-Boot] 32-bit Tegra build failure in u-boot-dm
Stephen Warren
- [U-Boot] [PATCH v1 0/9] apalis-tk1: fixes/updates for v2019.10
Tom Warren
- [U-Boot] [PATCH v2] qemu-x86: Use config_distro_bootcmd
Joshua Watt
- [U-Boot] [PATCH v2] qemu-x86: Use config_distro_bootcmd
Joshua Watt
- [U-Boot] [PATCH v3] qemu-x86: Use config_distro_bootcmd
Joshua Watt
- [U-Boot] [PATCH v3] qemu-x86: Use config_distro_bootcmd
Joshua Watt
- [U-Boot] [PATCH v2 00/99] ram: rk3399: Add LPDDR4 support
Chris Webb
- [U-Boot] [PATCH 0/2] rockchip: make_fit_atf.py Eliminate pyelftools dependency
Chris Webb
- [U-Boot] [PATCH 1/2] rockchip: make_fit_atf.py: Eliminate pyelftools dependency
Chris Webb
- [U-Boot] [PATCH 2/2] rockchip: Remove obsolete references to pyelftools
Chris Webb
- [U-Boot] [PATCH 2/2] rockchip: Remove obsolete references to pyelftools
Chris Webb
- [U-Boot] [PATCH v2 0/2] rockchip: make_fit_atf.py Eliminate pyelftools dependency
Chris Webb
- [U-Boot] [PATCH v2 1/2] rockchip: make_fit_atf.py: Eliminate pyelftools dependency
Chris Webb
- [U-Boot] [PATCH v2 2/2] rockchip: Remove obsolete references to pyelftools
Chris Webb
- [U-Boot] [PATCH v2 1/2] rockchip: make_fit_atf.py: Eliminate pyelftools dependency
Chris Webb
- [U-Boot] [PATCH v3 0/2] rockchip: make_fit_atf.py Eliminate pyelftools dependency
Chris Webb
- [U-Boot] [PATCH v3 1/2] rockchip: make_fit_atf.py: Eliminate pyelftools dependency
Chris Webb
- [U-Boot] [PATCH v3 2/2] rockchip: Remove obsolete references to pyelftools
Chris Webb
- [U-Boot] [PATCH 0/2] rockchip: tpl.c #ifdef fixes
Chris Webb
- [U-Boot] [PATCH 1/2] rockchip: Fix TPL build without CONFIG_TPL_SERIAL_SUPPORT
Chris Webb
- [U-Boot] [PATCH 2/2] rockchip: TPL banner should depend on CONFIG_TPL_BANNER_PRINT
Chris Webb
- [U-Boot] [PATCH] rockchip: rk3399: Add Khadas Edge board support
Chris Webb
- [U-Boot] [PATCH] rockchip: rk3399: Add Khadas Edge board support
Chris Webb
- [U-Boot] [PATCH v3 1/3] arm64: dts: rockchip: Add support for Khadas Edge
Chris Webb
- [U-Boot] [PATCH v3 3/3] arm64: dts: rockchip: Add support for Khadas Edge-Captain
Chris Webb
- [U-Boot] [PATCH v5 0/3] fit: Image node compression
Julius Werner
- [U-Boot] [PATCH v5 1/3] common: Move bootm_decomp_image() to image.c (as image_decomp())
Julius Werner
- [U-Boot] [PATCH v5 2/3] fit: Support compression for non-kernel components (e.g. FDT)
Julius Werner
- [U-Boot] [PATCH v5 3/3] fit: Support compat string property in configuration node
Julius Werner
- [U-Boot] [PATCH v4 1/2] fit: Support compression for non-kernel components (e.g. FDT)
Julius Werner
- [U-Boot] [PATCH v5 2/3] fit: Support compression for non-kernel components (e.g. FDT)
Julius Werner
- [U-Boot] [PATCH v5 3/3] fit: Support compat string property in configuration node
Julius Werner
- [U-Boot] [PATCH v5 0/3] fit: Image node compression
Julius Werner
- [U-Boot] [PATCH v5 1/3] common: Move bootm_decomp_image() to image.c (as image_decomp())
Julius Werner
- [U-Boot] [PATCH v6 0/3] fit: Image node compression
Julius Werner
- [U-Boot] [PATCH v6 1/3] common: Move bootm_decomp_image() to image.c (as image_decomp())
Julius Werner
- [U-Boot] [PATCH v6 2/3] fit: Support compression for non-kernel components (e.g. FDT)
Julius Werner
- [U-Boot] [PATCH v6 3/3] fit: Support compat string property in configuration node
Julius Werner
- [U-Boot] [PATCH v5 1/3] common: Move bootm_decomp_image() to image.c (as image_decomp())
Julius Werner
- [U-Boot] [PATCH] fpga: arria10: Fix error in fpga pin configuration
Dalon Westergreen
- [U-Boot] USB: XHCI xhci bulk ring code is wrong in xhci_bulk_tx()
Aaron Williams
- [U-Boot] [u-boot][xhci] Dealing with XHCI controllers with spurious success
Aaron Williams
- [U-Boot] [EXT] Re: [u-boot][xhci] Dealing with XHCI controllers with spurious success
Aaron Williams
- [U-Boot] [PATCH v2 1/3] board_r: move initr_watchdog to be called after initr_serial
Frank Wunderlich
- [U-Boot] [PATCH v2 1/3] board_r: move initr_watchdog to be called after initr_serial
Frank Wunderlich
- [U-Boot] [PATCH v7 0/2] add command env erase
Frank Wunderlich
- [U-Boot] [PATCH v7 0/2] add command env erase
Frank Wunderlich
- [U-Boot] [PATCH 0/4] add pcie/ahci for mt7623/bpi-r2
Frank Wunderlich
- [U-Boot] [PATCH 1/4] ahci-pci: ASM1061 report wrong class, but support AHCI.
Frank Wunderlich
- [U-Boot] [PATCH 2/4] ata: ahci: Don't forget to clear upper address regs.
Frank Wunderlich
- [U-Boot] [PATCH 3/4] pci: mediatek: Add pci-driver for mt2701
Frank Wunderlich
- [U-Boot] [PATCH 4/4] arm: dts: Add PCI-E controller for mt7623
Frank Wunderlich
- [U-Boot] [PATCH 3/4] pci: mediatek: Add pci-driver for mt2701
Frank Wunderlich
- [U-Boot] [PATCH] rockchip: rk3399: Add Khadas Edge board support
Nick Xie
- [U-Boot] [PATCH 01/18] arm64: dts: uniphier: add reserved-memory for secure memory
Masahiro Yamada
- [U-Boot] [PATCH 02/18] ARM: uniphier: remove unused uniphier_ld11_boot_device_fixup()
Masahiro Yamada
- [U-Boot] [PATCH 03/18] ARM: uniphier: clean up clk/Makefile
Masahiro Yamada
- [U-Boot] [PATCH 04/18] ARM: uniphier: remove argument from boot_device_is_usb() hook
Masahiro Yamada
- [U-Boot] [PATCH 05/18] ARM: uniphier: use bool type for have_internal_stm parameter
Masahiro Yamada
- [U-Boot] [PATCH 06/18] ARM: uniphier: include <linux/io.h> from boot-device.c
Masahiro Yamada
- [U-Boot] [PATCH 07/18] clk: uniphier: add EMMC clock for LD11, LD20, and PXs3
Masahiro Yamada
- [U-Boot] [PATCH 08/18] ARM: uniphier: check DT to determine whether to use support card
Masahiro Yamada
- [U-Boot] [PATCH 09/18] ARM: uniphier: check DT to determine whether to initialize SBC
Masahiro Yamada
- [U-Boot] [PATCH 10/18] ARM: uniphier: make boot_is_swapped() code optional
Masahiro Yamada
- [U-Boot] [PATCH 11/18] ARM: uniphier: detect SD boot mode
Masahiro Yamada
- [U-Boot] [PATCH 12/18] ARM: uniphier: de-couple SG macros into base address and offset
Masahiro Yamada
- [U-Boot] [PATCH 13/18] ARM: uniphier: de-couple SC macros into base address and offset
Masahiro Yamada
- [U-Boot] [PATCH 14/18] ARM: uniphier: detect register base addresses run-time
Masahiro Yamada
- [U-Boot] [PATCH 15/18] ARM: uniphier: make dram_init() independent of SG_MEMCONF
Masahiro Yamada
- [U-Boot] [PATCH 16/18] ARM: uniphier: make dram_init() more generic
Masahiro Yamada
- [U-Boot] [PATCH 17/18] ARM: uniphier: make mem_map run-time configurable
Masahiro Yamada
- [U-Boot] [PATCH 18/18] ARM: uniphier: remove CONFIG_SYS_SDRAM_BASE
Masahiro Yamada
- [U-Boot] [PATCH v2] spi: Add SPI controller driver for UniPhier SoCs
Masahiro Yamada
- [U-Boot] [PATCH v2 01/22] arm64: dts: uniphier: add reserved-memory for secure memory
Masahiro Yamada
- [U-Boot] [PATCH v2 02/22] ARM: uniphier: remove empty #ifdef block
Masahiro Yamada
- [U-Boot] [PATCH v2 03/22] ARM: uniphier: remove unused uniphier_ld11_boot_device_fixup()
Masahiro Yamada
- [U-Boot] [PATCH v2 04/22] ARM: uniphier: clean up clk/Makefile
Masahiro Yamada
- [U-Boot] [PATCH v2 05/22] ARM: uniphier: use bool type for have_internal_stm parameter
Masahiro Yamada
- [U-Boot] [PATCH v2 06/22] ARM: uniphier: include <linux/io.h> from boot-device.c
Masahiro Yamada
- [U-Boot] [PATCH v2 07/22] clk: uniphier: add EMMC clock for LD11, LD20, and PXs3
Masahiro Yamada
- [U-Boot] [PATCH v2 08/22] ARM: uniphier: check DT to determine whether to use support card
Masahiro Yamada
- [U-Boot] [PATCH v2 09/22] ARM: uniphier: check DT to determine whether to initialize SBC
Masahiro Yamada
- [U-Boot] [PATCH v2 10/22] ARM: uniphier: make boot_is_swapped() code optional
Masahiro Yamada
- [U-Boot] [PATCH v2 11/22] ARM: uniphier: detect SD boot mode
Masahiro Yamada
- [U-Boot] [PATCH v2 12/22] ARM: uniphier: de-couple SG macros into base address and offset
Masahiro Yamada
- [U-Boot] [PATCH v2 13/22] ARM: uniphier: de-couple SC macros into base address and offset
Masahiro Yamada
- [U-Boot] [PATCH v2 14/22] ARM: uniphier: detect register base addresses run-time
Masahiro Yamada
- [U-Boot] [PATCH v2 15/22] ARM: uniphier: make dram_init() independent of SG_MEMCONF
Masahiro Yamada
- [U-Boot] [PATCH v2 16/22] ARM: uniphier: make dram_init() more generic
Masahiro Yamada
- [U-Boot] [PATCH v2 17/22] ARM: uniphier: make mem_map run-time configurable
Masahiro Yamada
- [U-Boot] [PATCH v2 18/22] ARM: uniphier: remove CONFIG_SYS_SDRAM_BASE
Masahiro Yamada
- [U-Boot] [PATCH v2 19/22] ARM: uniphier: turn uniphier_set_fdt_file() into void function
Masahiro Yamada
- [U-Boot] [PATCH v2 20/22] ARM: uniphier: set loadaddr at boot-time
Masahiro Yamada
- [U-Boot] [PATCH v2 21/22] ARM: uniphier: set dram_base environment variable
Masahiro Yamada
- [U-Boot] [PATCH v2 22/22] ARM: uniphier: set {kernel, ramdisk, fdt}_addr_r at boot-time
Masahiro Yamada
- [U-Boot] [GIT PULL] UniPhier SoC updates for v2019.10-rc1
Masahiro Yamada
- [U-Boot] [RFC] bug.h: Drop filename from BUG/WARNING logs if building for TPL/SPL
Masahiro Yamada
- [U-Boot] [RFC] bug.h: Drop filename from BUG/WARNING logs if building for TPL/SPL
Masahiro Yamada
- [U-Boot] Question about GPL v3 font
Masahiro Yamada
- [U-Boot] [PATCH] rockchip: dts: rk3399: Add spl-boot-order for Rock PI 4
Andy Yan
- [U-Boot] [PATCH] rockchip: make_fit_atf.py: fix loadables property set error
Andy Yan
- [U-Boot] [PATCH] rockchip: make_fit_atf.py: fix loadables property set error
Andy Yan
- [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意,邮件由sjg at google.com代发】
Andy Yan
- [U-Boot] [PATCH] rockchip: make_fit_atf.py: fix loadables property set error【请注意,邮件由mark.kettenis at sibelius.xs4all.nl代发】
Andy Yan
- [U-Boot] [PATCH] rockchip: dts: rk3399: Add spl-boot-order for Rock PI 4
Andy Yan
- [U-Boot] [PATCH] rockchip: dts: rk3399: Add 'same-as-spl' for Rock PI 4
Andy Yan
- [U-Boot] [PATCH v2 1/2] rockchip: make_fit_atf.py: Eliminate pyelftools dependency
Andy Yan
- [U-Boot] [PATCH v3 1/2] rockchip: make_fit_atf.py: Eliminate pyelftools dependency
Andy Yan
- [U-Boot] [PATCH v3 3/8] rockchip: dts: rk3288: move reloc tag into -u-boot dts
Kever Yang
- [U-Boot] [PATCH v4 0/8] rockchip: enable TPL for tinker-rk3288
Kever Yang
- [U-Boot] [PATCH v4 1/8] rockchip: rk3288: enable TPL configs to chip level
Kever Yang
- [U-Boot] [PATCH v4 2/8] rockchip: rk3288: add separate TPL STACK address
Kever Yang
- [U-Boot] [PATCH v4 3/8] rockchip: dts: rk3288: move reloc tag into -u-boot dts
Kever Yang
- [U-Boot] [PATCH v4 4/8] rockchip: dts: tinker: migrate the dm-pre-reloc tag into -u-boot dts
Kever Yang
- [U-Boot] [PATCH v4 5/8] rockchip: dts: rk3288-tinker: enable sdmmc pinctrl node in spl
Kever Yang
- [U-Boot] [PATCH v4 6/8] rockchip: config: update config for TPL support on tinker-rk3288
Kever Yang
- [U-Boot] [PATCH v4 7/8] rockchip: config: tiner-rk3288: extend CONFIG_SYS_MONITOR_LEN to 600KB
Kever Yang
- [U-Boot] [PATCH v4 8/8] rockchip: rk3288: enable TPL for tinker-board
Kever Yang
- [U-Boot] [PATCH v2 3/4] usb: xhci-dwc3: Add USB2 PHY configuration
Kever Yang
- [U-Boot] [PATCH v2 1/4] rockchip: clk: rk3399: handle clk_enable requests for USB3
Kever Yang
- [U-Boot] [PATCH 1/6] arm64: rockchip: rock960: sync dts files from Linux 5.2-rc6
Kever Yang
- [U-Boot] [PATCH 2/6] configs: rockchip: rock960: drop options for non-existent HW
Kever Yang
- [U-Boot] [PATCH 3/6] configs: rockchip: rock960: enable pmic and regulator commands
Kever Yang
- [U-Boot] [PATCH 4/6] configs: rockchip: rock960: enable DMA for SDHCI controller
Kever Yang
- [U-Boot] [PATCH 5/6] configs: rockchip: rock960: Add support for USB ethernet adapters
Kever Yang
- [U-Boot] [PATCH 6/6] configs: rockchip: rock960: enable USB3 support
Kever Yang
- [U-Boot] [RESEND PATCH v3 13/18] usb: dwc3: Kconfig: get rid of obsolete mode selection
Kever Yang
- [U-Boot] [PATCH] spl: atf: Fix uninitialized pointer to bl31_image_info
Kever Yang
- [U-Boot] [PATCH] spl: atf: Fix uninitialized pointer to bl31_image_info【请注意,邮件由u-boot-bounces at lists.denx.de代发】 bl31_image_info
Kever Yang
- [U-Boot] [PATCH] rockchip: rk3399: Fix enabling boot-on regulators【请注意,邮件由u-boot-bounces at lists.denx.de代发】 regulators
Kever Yang
- [U-Boot] [PATCH] rockchip: dts: rk3399: rockpro64: Provide init voltage【请注意,邮件由u-boot-bounces at lists.denx.de代发】 init voltage
Kever Yang
- [U-Boot] [PATCH v5 0/8] rockchip: enable TPL for tinker-rk3288
Kever Yang
- [U-Boot] [PATCH v5 1/8] rockchip: rk3288: enable TPL configs to chip level
Kever Yang
- [U-Boot] [PATCH v5 2/8] rockchip: rk3288: add separate TPL STACK address
Kever Yang
- [U-Boot] [PATCH v5 3/8] rockchip: dts: rk3288: move reloc tag into -u-boot dts
Kever Yang
- [U-Boot] [PATCH v5 4/8] rockchip: dts: tinker: migrate the dm-pre-reloc tag into -u-boot dts
Kever Yang
- [U-Boot] [PATCH v5 5/8] rockchip: dts: rk3288-tinker: enable sdmmc pinctrl node in spl
Kever Yang
- [U-Boot] [PATCH v5 6/8] rockchip: config: update config for TPL support on tinker-rk3288
Kever Yang
- [U-Boot] [PATCH v5 7/8] rockchip: config: tiner-rk3288: extend CONFIG_SYS_MONITOR_LEN to 600KB
Kever Yang
- [U-Boot] [PATCH v5 8/8] rockchip: rk3288: enable TPL for tinker-board
Kever Yang
- [U-Boot] Pull request: u-boot-rockchip/tags/rockchip-for-v2019.07-rc5-2
Kever Yang
- [U-Boot] [PATCH v2 00/99] ram: rk3399: Add LPDDR4 support
Kever Yang
- [U-Boot] [PATCH] rockchip: make_fit_atf.py: fix loadables property set error
Kever Yang
- [U-Boot] [PATCH v2 00/99] ram: rk3399: Add LPDDR4 support
Kever Yang
- [U-Boot] [PATCH] rockchip: make_fit_atf.py: fix loadables property set error
Kever Yang
- [U-Boot] [PATCH] rockchip: make_fit_atf.py: fix loadables property set error【请注意,邮件由mark.kettenis at sibelius.xs4all.nl代发】
Kever Yang
- [U-Boot] Pull request: u-boot-rockchip/tags/rockchip-for-v2019.07-rc5-3
Kever Yang
- [U-Boot] [PATCH 0/4] rockchip: clean up pinctrl init code
Kever Yang
- [U-Boot] [PATCH 1/4] rockchip: rk3399: remove pinctrl init in spl_board_init
Kever Yang
- [U-Boot] [PATCH 2/4] rockchip: rk3188: remove pinctrl init in spl_board_init
Kever Yang
- [U-Boot] [PATCH 3/4] rockchip: rk3288: remove pinctrl init in spl_board_init
Kever Yang
- [U-Boot] [PATCH 4/4] rockchip: remove redundant pinctrl header including
Kever Yang
- [U-Boot] [PATCH 00/13] rockchip: clean up rk3288 board related code
Kever Yang
- [U-Boot] [PATCH 01/13] rockchip: rk3288: add arch_cpu_init in spl
Kever Yang
- [U-Boot] [PATCH 02/13] rockchip: rk3288: move configure_l2ctlr back to rk3288
Kever Yang
- [U-Boot] [PATCH 03/13] rockchip: rk3288: add default TPL_LDSCRIPT value in Kconfig
Kever Yang
- [U-Boot] [PATCH 04/13] rockchip: rk3288: enable TPL for evb-rk3288
Kever Yang
- [U-Boot] [PATCH 05/13] rockchip: evb-rk3288: add -u-boot.dtsi
Kever Yang
- [U-Boot] [PATCH 06/13] rockchip: fennec-rk3288: add -u-boot.dtsi
Kever Yang
- [U-Boot] [PATCH 07/13] rockchip: rk3288: update u-boot raw image size for all boards
Kever Yang
- [U-Boot] [PATCH 08/13] rockchip: firefly-rk3288: add -u-boot.dtsi
Kever Yang
- [U-Boot] [PATCH 09/13] rockchip: rk3288-firefly: sync sdmmc pinctrl from mainline
Kever Yang
- [U-Boot] [PATCH 10/13] rockchip: miqi-rk3288: add -u-boot.dtsi
Kever Yang
- [U-Boot] [PATCH 11/13] rockchip: popmetal-rk3288: add -u-boot.dtsi
Kever Yang
- [U-Boot] [PATCH 12/13] rockchip: rk3288: dts: enable spl-boot-order
Kever Yang
- [U-Boot] [PATCH 13/13] rockchip: board: rk3288: remove board_boot_order()
Kever Yang
- [U-Boot] [PATCH 00/12] rockchip: switch to use ARM arch/generic timer
Kever Yang
- [U-Boot] [PATCH 01/12] rockchip: rk322x: sdram: use udelay instead of rockchip_udelay
Kever Yang
- [U-Boot] [PATCH 02/12] rockchip: rk322x: use ARM arch timer instead of rk_timer
Kever Yang
- [U-Boot] [PATCH 03/12] rockchip: rk3036: sdram: use udelay instead of rockchip_udelay
Kever Yang
- [U-Boot] [PATCH 04/12] rockchip: rk3036: use ARM arch timer instead of rk_timer
Kever Yang
- [U-Boot] [PATCH 05/12] rockchip: rk3288: use ARM arch timer instead of rk_timer
Kever Yang
- [U-Boot] [PATCH 06/12] rockchip: rk3128: use ARM arch timer instead of rk_timer
Kever Yang
- [U-Boot] [PATCH 07/12] rockchip: remove no use header file in board code
Kever Yang
- [U-Boot] [PATCH 08/12] rockchip: remove rk_timer
Kever Yang
- [U-Boot] [PATCH 09/12] rockchip: rk3368: move sgrf init to spl as arch_cpu_init()
Kever Yang
- [U-Boot] [PATCH 10/12] rockchip: rk3368: enable stimer for rk3368
Kever Yang
- [U-Boot] [PATCH 11/12] rockchip: rk3368-lion: switch to use ARM generic timer
Kever Yang
- [U-Boot] [PATCH 12/12] rockchip: evb-px5: switch to use ARM generic timer
Kever Yang
- [U-Boot] [PATCH 0/7] rockchip: migrate to use common TPL board file
Kever Yang
- [U-Boot] [PATCH 1/7] rockchip: add common tpl board file
Kever Yang
- [U-Boot] [PATCH 2/7] rockchip: rk322x: use common TPL board file
Kever Yang
- [U-Boot] [PATCH 3/7] rockchip: rk3288: use common SPL board file
Kever Yang
- [U-Boot] [PATCH 4/7] rockchip: rk3368: use common TPL board file
Kever Yang
- [U-Boot] [PATCH 5/7] rockchip: rk3399: use common secure_timer_init() for spl/tpl
Kever Yang
- [U-Boot] [PATCH 6/7] rockchip: rk3399: remove TPL_BOARD_INIT
Kever Yang
- [U-Boot] [PATCH 7/7] rockchip: rk3399: use common TPL board file
Kever Yang
- [U-Boot] [PATCH 00/15] rockchip: clean up board defconfig and Kconfig defines
Kever Yang
- [U-Boot] [PATCH 01/15] rockchip: fixup board choice in Kconfig
Kever Yang
- [U-Boot] [PATCH 02/15] rockchip: Kconfig: move rk322x config into its Kconfig
Kever Yang
- [U-Boot] [PATCH 03/15] rockchip: Kconfig: move rk3288 config into its Kconfig
Kever Yang
- [U-Boot] [PATCH 04/15] rockchip: Kconfig: move rk3368 config into its Kconfig
Kever Yang
- [U-Boot] [PATCH 05/15] rockchip: Kconfig: move rk3399 config into its Kconfig
Kever Yang
- [U-Boot] [PATCH 06/15] rockchip: Kconfig: move ROCKCHIP_BOOT_MODE_REG to soc Kconfig
Kever Yang
- [U-Boot] [PATCH 07/15] rockchip: rk322x: use defconfig for SYS_MALLOC_F_LEN
Kever Yang
- [U-Boot] [PATCH 08/15] rockchip: rk3288: use default value for SYS_MALLOC_F_LEN
Kever Yang
- [U-Boot] [PATCH 09/15] rockchip: rk3399: use default value for SYS_MALLOC_F_LEN
Kever Yang
- [U-Boot] [PATCH 10/15] rockchip: rk3328: use defaule value for SYS_MALLOC_F_LEN
Kever Yang
- [U-Boot] [PATCH 11/15] rockchip: rk3368: use defaule value for SYS_MALLOC_F_LEN
Kever Yang
- [U-Boot] [PATCH 12/15] rockchip: rk3399: default enable SPL LIBCOMMON and LIBGENERIC
Kever Yang
- [U-Boot] [PATCH 13/15] rockchip: rk3328: default enable SPL LIBCOMMON and LIBGENERIC
Kever Yang
- [U-Boot] [PATCH 14/15] rockchip: rk322x: default enable SPL LIBCOMMON and LIBGENERIC
Kever Yang
- [U-Boot] [PATCH 15/15] rockchip: rk3368: default enable SPL LIBCOMMON and LIBGENERIC
Kever Yang
- [U-Boot] [PATCH] rockchip: rock960-rk3399: fix mail format in MAINTAINER file
Kever Yang
- [U-Boot] [PATCH V2 41/51] spl: pass args to board_return_to_bootrom
Kever Yang
- [U-Boot] [PATCH] rockchip: derive ethaddr from cpuid
Kever Yang
- [U-Boot] [PATCH] rockchip: dts: rk3399: Add spl-boot-order for Rock PI 4
Kever Yang
- [U-Boot] [PATCH v2 01/99] ram: rk3399: Fix code warnings
Kever Yang
- [U-Boot] [PATCH v2 07/99] ram: rk3399: Move macro after include files
Kever Yang
- [U-Boot] [PATCH v2 08/99] ram: rk3399: Clear PI_175 interrupts in data training
Kever Yang
- [U-Boot] [PATCH 1/1] rockchip: video: rk3288_hdmi: Add missing call to dw_hdmi_enable()【请注意,邮件由u-boot-bounces at lists.denx.de代发】 to dw_hdmi_enable()
Kever Yang
- [U-Boot] [PATCH v2 1/3] rockchip: rk3399: derive ethaddr from cpuid
Kever Yang
- [U-Boot] [PATCH v2 1/4] rockchip: clk: rk3399: handle clk_enable requests for USB3【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Kever Yang
- [U-Boot] [PATCH v2 2/4] usb: dwc3-of-simple: Add support for RK3399
Kever Yang
- [U-Boot] [PATCH v2 3/4] usb: xhci-dwc3: Add USB2 PHY configuration【请注意,邮件由u-boot-bounces at lists.denx.de代发】 configuration
Kever Yang
- [U-Boot] [PATCH v2 4/4] rockchip: xhci: Remove RK3399 support
Kever Yang
- [U-Boot] [PATCH 1/6] arm64: rockchip: rock960: sync dts files from Linux 5.2-rc6【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Kever Yang
- [U-Boot] [PATCH 2/6] configs: rockchip: rock960: drop options for non-existent HW
Kever Yang
- [U-Boot] [PATCH 3/6] configs: rockchip: rock960: enable pmic and regulator commands
Kever Yang
- [U-Boot] [PATCH 4/6] configs: rockchip: rock960: enable DMA for SDHCI controller
Kever Yang
- [U-Boot] [PATCH 5/6] configs: rockchip: rock960: Add support for USB ethernet adapters
Kever Yang
- [U-Boot] [PATCH 6/6] configs: rockchip: rock960: enable USB3 support【请注意,邮件由u-boot-bounces at lists.denx.de代发】 support
Kever Yang
- [U-Boot] [PATCH v3 01/15] ram: rk3399: Fix code warnings
Kever Yang
- [U-Boot] [PATCH v3 02/15] ram: rk3399: Some trivial code fixes
Kever Yang
- [U-Boot] [PATCH v3 03/15] ram: rk3399: s/sdram_params/params【请注意,邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】
Kever Yang
- [U-Boot] [PATCH v3 04/15] ram: rk3399: Handle pctl_cfg return type
Kever Yang
- [U-Boot] [PATCH v3 05/15] ram: rk3399: s/tsel_wr_select_n/tsel_wr_select_dq_n
Kever Yang
- [U-Boot] [PATCH v3 06/15] ram: rk3399: s/tsel_wr_select_p/tsel_wr_select_dq_p
Kever Yang
- [U-Boot] [PATCH v3 07/15] ram: rk3399: s/ca_tsel_wr_select_n/tsel_wr_select_ca_n
Kever Yang
- [U-Boot] [PATCH v3 08/15] ram: rk3399: s/ca_tsel_wr_select_p/tsel_wr_select_ca_p
Kever Yang
- [U-Boot] [PATCH v3 09/15] ram: rk3399: Order tsel variables
Kever Yang
- [U-Boot] [PATCH v3 10/15] ram: rockchip: rk3399: Add cap_info structure
Kever Yang
- [U-Boot] [PATCH v3 11/15] ram: rk3399: s/rk3399_base_params/sdram_base_params
Kever Yang
- [U-Boot] [PATCH v3 12/15] ram: rk3399: Move common sdram structures in common header
Kever Yang
- [U-Boot] [PATCH v3 13/15] arm: include: rockchip: Move dramtypes to common header
Kever Yang
- [U-Boot] [PATCH v3 14/15] arm: include: rockchip: Add DDR4 enum
Kever Yang
- [U-Boot] [PATCH v3 15/15] clk: rockchip: rk3399: Fix check patch warnings and checks
Kever Yang
- [U-Boot] [PATCH v3 01/18] ram: rk3399: Handle data training return types
Kever Yang
- [U-Boot] [PATCH v3 02/18] ram: rk3399: Clear PI_175 interrupts in data training
Kever Yang
- [U-Boot] [PATCH v3 03/18] ram: rk3399: Use rank mask in ca data training
Kever Yang
- [U-Boot] [PATCH v3 04/18] ram: rk3399: Use rank mask in wdql data training
Kever Yang
- [U-Boot] [PATCH v3 05/18] ram: rk3399: Add phy pctrl reset support
Kever Yang
- [U-Boot] [PATCH v3 06/18] ram: rk3399: Move pwrup_srefresh_exit to dram_info
Kever Yang
- [U-Boot] [PATCH v3 07/18] ram: rk3399: Add pctl start support
Kever Yang
- [U-Boot] [PATCH v3 08/18] ram: rockchip: Add initial Kconfig
Kever Yang
- [U-Boot] [PATCH v3 09/18] debug_uart: Add printdec
Kever Yang
- [U-Boot] [PATCH v3 10/18] ram: rockchip: Add debug sdram driver
Kever Yang
- [U-Boot] [PATCH v3 11/18] ram: rockchip: debug: Add sdram_print_ddr_info
Kever Yang
- [U-Boot] [PATCH v3 12/18] ram: rockchip: debug: Get the cs capacity
Kever Yang
- [U-Boot] [PATCH v3 13/18] ram: rk3399: debug: Add sdram_print_stride
Kever Yang
- [U-Boot] [PATCH v3 14/18] ram: rk3399: Compute stride for 2 channels
Kever Yang
- [U-Boot] [PATCH v3 15/18] ram: rk3399: Compute stride for 1 channel a
Kever Yang
- [U-Boot] [PATCH v3 16/18] ram: rk3399: Add rank detection support
Kever Yang
- [U-Boot] [PATCH v3 18/18] rockchip: dts: rk3399: nanopi-neo4: Use DDR3-1866 dtsi
Kever Yang
- [U-Boot] [PATCH v3 17/18] ram: rk3399: Enable sdram debug functions
Kever Yang
- [U-Boot] [PATCH v2 2/2] rockchip: Remove obsolete references to pyelftools
Kever Yang
- [U-Boot] [PATCH v2 1/2] rockchip: make_fit_atf.py: Eliminate pyelftools dependency
Kever Yang
- [U-Boot] [PATCH] rockchip: enable rk322x TPL_BOOTROM_SUPPORT in Kconfig
Kever Yang
- [U-Boot] [PATCH v3 01/57] ram: rk3399: Add ddrtype enc macro
Kever Yang
- [U-Boot] [PATCH v3 02/57] ram: rk3399: Add channel number encoder macro
Kever Yang
- [U-Boot] [PATCH v3 03/57] ram: rk3399: Add row_3_4 enc macro
Kever Yang
- [U-Boot] [PATCH v3 04/57] ram: rk3399: Add chipinfo macro
Kever Yang
- [U-Boot] [PATCH v3 05/57] ram: rk3399: Add rank enc macro
Kever Yang
- [U-Boot] [PATCH v3 06/57] ram: rk3399: Add column enc macro
Kever Yang
- [U-Boot] [PATCH v3 07/57] ram: rk3399: Add bk enc macro
Kever Yang
- [U-Boot] [PATCH v3 08/57] ram: rk3399: Add dbw enc macro
Kever Yang
- [U-Boot] [PATCH v3 09/57] ram: rk3399: Add cs0_rw macro
Kever Yang
- [U-Boot] [PATCH v3 18/57] ram: rk3399: Add DdrMode
Kever Yang
- [U-Boot] [PATCH v3 17/57] ram: rk3399: Add ddrtimingC0
Kever Yang
- [U-Boot] [PATCH v3 16/57] ram: rk3399: Add ddr version enc macro
Kever Yang
- [U-Boot] [PATCH v3 15/57] ram: rk3399: Add cs1_col enc macro
Kever Yang
- [U-Boot] [PATCH v3 14/57] ram: rk3399: Update cs1_row to use sys_reg3
Kever Yang
- [U-Boot] [PATCH v3 13/57] ram: rk3399: Update cs0_row to use sys_reg3
Kever Yang
- [U-Boot] [PATCH v3 12/57] ram: rk3399: Rename sys_reg with sys_reg2
Kever Yang
- [U-Boot] [PATCH v3 11/57] ram: rk3399: Add bw enc macro
Kever Yang
- [U-Boot] [PATCH v3 10/57] ram: rk3399: Add cs1_rw macro
Kever Yang
- [U-Boot] [PATCH v3 19/57] ram: rk3399: Configure phy IO in ds odt
Kever Yang
- [U-Boot] [PATCH v3 00/57] ram: rk3399: Add LPDDR4 support
Kever Yang
- [U-Boot] [PATCH v3 20/57] ram: rockchip: Kconfig: Add RK3399 LPDDR4 entry
Kever Yang
- [U-Boot] [PATCH v3 21/57] ram: rk3399: Add lpddr4 rank mask for ca training
Kever Yang
- [U-Boot] [PATCH v3 22/57] ram: rk3399: Add lpddr4 rank mask for wdql training
Kever Yang
- [U-Boot] [PATCH v3 23/57] ram: rk3399: Move mode_sel assignment
Kever Yang
- [U-Boot] [PATCH v3 24/57] ram: rk3399: Don't wait for PLL lock in lpddr4
Kever Yang
- [U-Boot] [PATCH v3 25/57] ram: rk3399: Avoid two channel ZQ Cal Start at the same time
Kever Yang
- [U-Boot] [PATCH v3 26/57] ram: rk3399: Configure PHY_898, PHY_919 for lpddr4
Kever Yang
- [U-Boot] [PATCH v3 27/57] ram: rk3399: Configure BOOSTP_EN, BOOSTN_EN for lpddr4
Kever Yang
- [U-Boot] [PATCH v3 28/57] ram: rk3399: Configure SLEWP_EN, SLEWN_EN for lpddr4
Kever Yang
- [U-Boot] [PATCH v3 29/57] ram: rk3399: Configure PHY RX_CM_INPUT for lpddr4
Kever Yang
- [U-Boot] [PATCH v3 30/57] ram: rk3399: Map chipselect for lpddr4
Kever Yang
- [U-Boot] [PATCH v3 31/57] ram: rk3399: Configure tsel write ca for lpddr4
Kever Yang
- [U-Boot] [PATCH v3 32/57] ram: rk3399: Don't disable dfi dram clk for lpddr4, rank 1
Kever Yang
- [U-Boot] [PATCH v3 33/57] ram: rk3399: Add IO settings
Kever Yang
- [U-Boot] [PATCH v3 34/57] ram: sdram: Configure lpddr4 tsel rd, wr based on IO settings
Kever Yang
- [U-Boot] [PATCH v3 35/57] ram: rk3399: Add tsel control clock drive
Kever Yang
- [U-Boot] [PATCH v3 36/57] ram: rk3399: Configure soc odt support
Kever Yang
- [U-Boot] [PATCH v3 37/57] ram: rk3399: Get lpddr4 tsel_rd_en from io settings
Kever Yang
- [U-Boot] [PATCH v3 38/57] ram: rk3399: Update lpddr4 vref based on io settings
Kever Yang
- [U-Boot] [PATCH v3 39/57] ram: rk3399: Update lpddr4 mode_sel based on io settings
Kever Yang
- [U-Boot] [PATCH v3 40/57] ram: rk3399: Update lpddr4 vref_mode_ac
Kever Yang
- [U-Boot] [PATCH v3 41/57] ram: rk3399: Simplify data training first argument
Kever Yang
- [U-Boot] [PATCH v3 42/57] ram: rk3399: Handle data training via ops
Kever Yang
- [U-Boot] [PATCH v3 43/57] ram: rk3399: Add LPPDR4 mr detection
Kever Yang
- [U-Boot] [PATCH v3 44/57] arm: include: rockchip: Add rk3399 pmu file
Kever Yang
- [U-Boot] [PATCH v3 45/57] rockchip: rk3399: syscon: Add pmu support
Kever Yang
- [U-Boot] [PATCH v3 46/57] rockchip: dts: rk3399: Add u-boot, dm-pre-reloc for pmu
Kever Yang
- [U-Boot] [PATCH v3 47/57] clk: rockchip: rk3399: Set 50MHz ddr clock
Kever Yang
- [U-Boot] [PATCH v3 48/57] clk: rockchip: rk3399: Set 400MHz ddr clock
Kever Yang
- [U-Boot] [PATCH v3 49/57] ram: rk3399: Add LPPDDR4-400 timings inc
Kever Yang
- [U-Boot] [PATCH v3 50/57] ram: rk3399: Add LPPDDR4-800 timings inc
Kever Yang
- [U-Boot] [PATCH v3 51/57] ram: rk3399: Add set_rate sdram rk3399 ops
Kever Yang
- [U-Boot] [PATCH v3 52/57] ram: rk3399: Add lpddr4 set rate support
Kever Yang
- [U-Boot] [PATCH v3 53/57] configs: rockpro64: Enable LPDDR4 support
Kever Yang
- [U-Boot] [PATCH v3 54/57] configs: rock-pi-4: Enable LPDDR4 support
Kever Yang
- [U-Boot] [PATCH v3 55/57] rockchip: dts: rk3399: Add LPDDR4-100 timings
Kever Yang
- [U-Boot] [PATCH v3 56/57] rockchip: dts: rk3399: rockpro64: Use LPDDR4-100 dtsi
Kever Yang
- [U-Boot] [PATCH v3 57/57] rockchip: dts: rk3399: rock-pi-4: Use LPDDR4-100 dtsi
Kever Yang
- [U-Boot] [PATCH] rockchip: dts: rk3399: Add 'same-as-spl' for Rock PI 4
Kever Yang
- [U-Boot] [PATCH] rockchip: spl-boot-order: update dependency to OF_LIBFDT
Kever Yang
- [U-Boot] [PATCH v3 2/2] rockchip: Remove obsolete references to pyelftools
Kever Yang
- [U-Boot] [PATCH v3 1/2] rockchip: make_fit_atf.py: Eliminate pyelftools dependency
Kever Yang
- [U-Boot] [PATCH v3 16/18] ram: rk3399: Add rank detection support
Kever Yang
- [U-Boot] [PATCH] core: ofnode: do not assert if node not valid in ofnode_get_name()
Kever Yang
- [U-Boot] [PATCH] am335x_boneblack_vboot: Disable asm memcpy/memset in SPL
Kever Yang
- [U-Boot] [PATCH] rockchip: sdhci: Fix sdhci mmc driver probe abort
Kever Yang
- [U-Boot] [PATCH v3 52/57] ram: rk3399: Add lpddr4 set rate support
Kever Yang
- [U-Boot] Pull request: u-boot-rockchip/tags/rockchip-for-v2019.07
Kever Yang
- [U-Boot] [PATCH 1/2] rockchip: Fix TPL build without CONFIG_TPL_SERIAL_SUPPORT
Kever Yang
- [U-Boot] [PATCH 2/2] rockchip: TPL banner should depend on CONFIG_TPL_BANNER_PRINT
Kever Yang
- [U-Boot] [PATCH v2 1/3] rockchip: rk3399: derive ethaddr from cpuid
Kever Yang
- [U-Boot] U-Boot build error when switch different SoC without clean
Kever Yang
- [U-Boot] [PATCH 1/1] efi_loader: always rebuild efi_crt0.o
Kever Yang
- [U-Boot] [PATCH 00/35] rockchip: Migrate to use common SPL board file
Kever Yang
- [U-Boot] [PATCH 01/35] rockchip: remove redundant CONFIG_SYS_NS16550_MEM32
Kever Yang
- [U-Boot] [PATCH 02/35] rockchip: add CONFIG_IRAM_BASE for all SoCs
Kever Yang
- [U-Boot] [PATCH 03/35] rockchip: intruduce common BROM_BOOTSOURCE_ID_ADDR
Kever Yang
- [U-Boot] [PATCH 04/35] rockchip: declear boot_devices in bootrom.h
Kever Yang
- [U-Boot] [PATCH 05/35] rockchip: add common spl board file
Kever Yang
- [U-Boot] [PATCH 06/35] rockchip: rk3188: init CPU freq in clock driver
Kever Yang
- [U-Boot] [PATCH 07/35] rockchip: rk3188: move usb uart init into arch_cpu_init()
Kever Yang
- [U-Boot] [PATCH 08/35] rockchip: Migrate to use BOOTROM_SUPPORT driver
Kever Yang
- [U-Boot] [PATCH 09/35] rockchip: rk3188: move spl_board_init() into rk3188.c
Kever Yang
- [U-Boot] [PATCH 10/35] rockchip: rk3188: add boot_devices mapping to support 'same-as-spl'
Kever Yang
- [U-Boot] [PATCH 11/35] rockchip: rk3188: migrate to use common spl board file
Kever Yang
- [U-Boot] [PATCH 12/35] rockchip: rk322x: introduce arch_cpu_init() for SoC setting init
Kever Yang
- [U-Boot] [PATCH 13/35] rockchip: rk322x: migrate to use common spl board file
Kever Yang
- [U-Boot] [PATCH 14/35] rockchip: rk322x: add boot_devices mapping to support 'same-as-spl'
Kever Yang
- [U-Boot] [PATCH 15/35] rockchip: fit_spl_optee: rockchip: fix warning unit_address_vs_reg
Kever Yang
- [U-Boot] [PATCH 16/35] rockchip: rk3288: show SPL BANNER earlier in board_init_f()
Kever Yang
- [U-Boot] [PATCH 17/35] rockchip: rk3288: move setup_led() to firefly-rk3288
Kever Yang
- [U-Boot] [PATCH 18/35] rockchip: rk3288-phycore: move phycore_init() to its own board file
Kever Yang
- [U-Boot] [PATCH 19/35] rockchip: rk3288: move dram_init_banksize() into soc file
Kever Yang
- [U-Boot] [PATCH 20/35] rockchip: rk3288: Migrate to use common spl board file
Kever Yang
- [U-Boot] [PATCH 21/35] rockchip: phycore: remove no use "u-boot, boot0" in dts
Kever Yang
- [U-Boot] [PATCH 22/35] rockchip: rk3288-veyron: Migrate "u-boot, boot0" to "u-boot, spl-boot-order"
Kever Yang
- [U-Boot] [PATCH 23/35] rockchip: rk3288: add boot_devices mapping to support 'same-as-spl'
Kever Yang
- [U-Boot] [PATCH 24/35] rockchip: rk3328: add STIMER_BASE definition
Kever Yang
- [U-Boot] [PATCH 25/35] rockchip: rk3328: migrate to use common spl board file
Kever Yang
- [U-Boot] [PATCH 26/35] rockchip: rk3328: add boot_devices mapping to support 'same-as-spl'
Kever Yang
- [U-Boot] [PATCH 27/35] rockchip: rk3368: migrate to use common spl board file
Kever Yang
- [U-Boot] [PATCH 28/35] rockchip: rk3368: add boot_devices mapping to support 'same-as-spl'
Kever Yang
- [U-Boot] [PATCH 29/35] rockchip: rk3399: move spl_perform_fixups() into soc file
Kever Yang
- [U-Boot] [PATCH 30/35] rockchip: rk3399: show SPL BANNER earlier in board_init_f()
Kever Yang
- [U-Boot] [PATCH 31/35] rockchip: rk3399: move SoC setting into arch_cpu_init()
Kever Yang
- [U-Boot] [PATCH 32/35] rockchip: rk3399; move spl_board_init() into soc file
Kever Yang
- [U-Boot] [PATCH 33/35] rockchip: rk3399: move boot_devices into soc file
Kever Yang
- [U-Boot] [PATCH 34/35] rockchip: rk3399: move chromebook bob specific flow to its board file
Kever Yang
- [U-Boot] [PATCH 35/35] rockchip: rk3399: Migrate to use common spl board file
Kever Yang
- [U-Boot] [PATCH 00/24] rockchip: Migrate to use common board file
Kever Yang
- [U-Boot] [PATCH 01/24] rockchip: rk3328: add board_debug_uart_init()
Kever Yang
- [U-Boot] [PATCH 02/24] rockchip: convert to use ROCKCHIP_BOOT_MODE_REG for fastboot tag
Kever Yang
- [U-Boot] [PATCH 03/24] rockchip: clean up board_usb_init() for all SoCs
Kever Yang
- [U-Boot] [PATCH 04/24] rockchip: add common board file for U-Boot proper
Kever Yang
- [U-Boot] [PATCH 05/24] rockchip: sdram_common: add common dram_init_banksize
Kever Yang
- [U-Boot] [PATCH 06/24] rockchip: rk3036: move dram_init() into soc file
Kever Yang
- [U-Boot] [PATCH 07/24] rockchip: rk3036: Migrate to use common board file
Kever Yang
- [U-Boot] [PATCH 08/24] rockchip: rk3128: Migrate to use common board file
Kever Yang
- [U-Boot] [PATCH 09/24] rockchip: rk322x: move SoC setting into arch_cpu_init()
Kever Yang
- [U-Boot] [PATCH 10/24] rockchip: rk322x: Migrate to use common board file
Kever Yang
- [U-Boot] [PATCH 11/24] rockchip: rk3188: Move SoC one time setting into arch_cpu_init()
Kever Yang
- [U-Boot] [PATCH 12/24] rockchip: rk3188: Migrate to use common board file
Kever Yang
- [U-Boot] [PATCH 13/24] rockchip: rk3288: move SOC setting into arch_cpu_init()
Kever Yang
- [U-Boot] [PATCH 14/24] rockchip: rk3288: move board_early_init_f() back to veyron
Kever Yang
- [U-Boot] [PATCH 15/24] rockchip: rk3288: Move veyron_init() back to veyron.c
Kever Yang
- [U-Boot] [PATCH 16/24] rockchip: rk3288: Move clock CMD to SoC file
Kever Yang
- [U-Boot] [PATCH 17/24] rockchip: rk3288: Move rk3288_detect_reset_reason to soc file
Kever Yang
- [U-Boot] [PATCH 18/24] rockchip: rk3288: Migrate to use common board file
Kever Yang
- [U-Boot] [PATCH 19/24] rockchip: rk3328: Migrate to use common board file
Kever Yang
- [U-Boot] [PATCH 20/24] rockchip: rk3328: Migrate to use common board file
Kever Yang
- [U-Boot] [PATCH 21/24] rockchip: rk3399: init vbus regulator in board_early_init_f()
Kever Yang
- [U-Boot] [PATCH 22/24] rockchip: rk3399: Migrate to use common board file
Kever Yang
- [U-Boot] [PATCH 23/24] rockchip: elgin-rv1108: use board_early_init_f for per-boar init
Kever Yang
- [U-Boot] [PATCH 24/24] rockchip: rv1108: Migrate to use common board file
Kever Yang
- [U-Boot] Pull request: u-boot-rockchip/tags/rockchip-for-v2019.07-2
Kever Yang
- [U-Boot] [PATCH 1/2] rockchip: Fix TPL build without CONFIG_TPL_SERIAL_SUPPORT【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Kever Yang
- [U-Boot] [PATCH 2/2] rockchip: TPL banner should depend on CONFIG_TPL_BANNER_PRINT【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Kever Yang
- [U-Boot] [PATCH] rockchip: sdhci: Fix sdhci mmc driver probe abort
Kever Yang
- [U-Boot] [PATCH v3 1/2] rockchip: make_fit_atf.py: Eliminate pyelftools dependency【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Kever Yang
- [U-Boot] [PATCH v3 2/2] rockchip: Remove obsolete references to pyelftools【请注意,邮件由u-boot-bounces at lists.denx.de代发】 pyelftools
Kever Yang
- [U-Boot] [PATCH 1/2] arm: dts: rock960: Enable booting from eMMC when using SPL
Kever Yang
- [U-Boot] [PATCH v2] mmc: sti_sdhci: Fix sdhci_setup_cfg() call.【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Kever Yang
- [U-Boot] [PATCH] board_r: re-order the board_early_init_r()
Kever Yang
- [U-Boot] [PATCH] board_r: re-order the board_early_init_r()
Kever Yang
- [U-Boot] [PATCH v3 3/3] board: puma: Use rockchip_* helpers to setup cpuid and macaddr【请注意,邮件由u-boot-bounces at lists.denx.de代发】 setup cpuid and macaddr
Kever Yang
- [U-Boot] [PATCH] spl_mmc: always use find_mmc_device() to get mmc handler
Kever Yang
- [U-Boot] [PATCH] part: always enable part_get_info_ptr() for driver
Kever Yang
- [U-Boot] [PATCH v3] dw_mmc: turn on the IO supply
Kever Yang
- [U-Boot] [PATCH v2 2/3] configs: Move CONFIG_CMD_USB_MASS_STORAGE properly into Kconfig
Kever Yang
- [U-Boot] [PATCH v2 3/3] configs: update rk3288 veyron defconfigs
Kever Yang
- [U-Boot] [PATCH 1/3] sysreset: switch to using SYSRESET_POWER_OFF for poweroff
Kever Yang
- [U-Boot] [PATCH] Fix RK3328-evb Floating GPIO0_D6 - pull up - 4ma
Kever Yang
- [U-Boot] [PATCH] rockchip: rk3399: Add Khadas Edge board support
Kever Yang
- [U-Boot] [PATCH 1/2] rk3399: Restore broken USB3 DTS description.
Kever Yang
- [U-Boot] buildman rockchip
Kever Yang
- [U-Boot] buildman rockchip
Kever Yang
- [U-Boot] Pull request: u-boot-rockchip u-boot-rockchip-20190729
Kever Yang
- [U-Boot] [PATCH] spl_mmc: always use find_mmc_device() to get mmc handler
Kever Yang
- [U-Boot] [PATCH] board_r: re-order the board_early_init_r()
Kever Yang
- [U-Boot] [PATCH] menu: don't bother going interactive with just one menu item
Leon Yu
- [U-Boot] [PATCH] ARM: imx6: DHCOM i.MX6 PDK: enable pad pull ups of SS lines of spi used for boot
Ludwig Zenz
- [U-Boot] [PATCH 1/3] ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite
Ludwig Zenz
- [U-Boot] [PATCH 2/3] ARM: dts: imx: dh-imx6: Add DHCOM iMX6 Duallite PDK2 device tree
Ludwig Zenz
- [U-Boot] [PATCH 3/3] ARM: imx6: DHCOM i.MX6 PDK: config SPL to load U-Boot fitImage with mulitple DTs
Ludwig Zenz
- [U-Boot] [PATCH v3 1/3] ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite
Ludwig Zenz
- [U-Boot] [PATCH v3 2/3] ARM: dts: imx: dh-imx6: Add DHCOM iMX6 Duallite PDK2 device tree
Ludwig Zenz
- [U-Boot] [PATCH v3 3/3] ARM: imx6: DHCOM i.MX6 PDK: config SPL to load U-Boot fitImage with mulitple DTs
Ludwig Zenz
- [U-Boot] [PATCH] ARCH: imx: Call sata_remove() not on imx6 duallite/solo boards
Ludwig Zenz
- [U-Boot] [PATCH] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
Ludwig Zenz
- [U-Boot] [PATCH] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
Ludwig Zenz
- [U-Boot] [PATCH v2] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
Ludwig Zenz
- [U-Boot] [PATCH] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
Ludwig Zenz
- [U-Boot] [PATCH v2] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
Ludwig Zenz
- [U-Boot] [PATCH v2] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
Ludwig Zenz
- [U-Boot] [PATCH v3] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
Ludwig Zenz
- [U-Boot] [PATCH 1/1] board: Arcturus: ucp1020: Removing obsoleted stuff
Oleksandr Zhadan
- [U-Boot] [linux-sunxi] [PATCH v2 3/7] sunxi: H6: move LPDDR3 timing definition into separate file
Icenowy Zheng
- [U-Boot] [PATCH 0/3] dm: pcie_fsl: Fix some issues
Hou Zhiqiang
- [U-Boot] [PATCH 1/3] dm: pcie_fsl: Fix workaround of P4080 erratum A003
Hou Zhiqiang
- [U-Boot] [PATCH 2/3] dm: pcie_fsl: Fix the Class Code fixup function
Hou Zhiqiang
- [U-Boot] [PATCH 3/3] dm: pcie_fsl: Fix the calculation of controller index
Hou Zhiqiang
- [U-Boot] [PATCH 00/47] powerpc: Enable PCIe DM drvier for some platforms
Hou Zhiqiang
- [U-Boot] [PATCH 01/47] powerpc: T208xRDB: Compile legacy PCIe routines conditionally
Hou Zhiqiang
- [U-Boot] [PATCH 02/47] powerpc: T208xRDB: Disable legacy PCIe driver when DM_PCI is enabled
Hou Zhiqiang
- [U-Boot] [PATCH 03/47] configs: T2080RDB: Enable PCIe driver
Hou Zhiqiang
- [U-Boot] [PATCH 04/47] powerpc: T4RDB: Compile legacy PCIe routines conditionally
Hou Zhiqiang
- [U-Boot] [PATCH 05/47] dm: pcie_fsl: Add T4240 PCIe support
Hou Zhiqiang
- [U-Boot] [PATCH 06/47] t4240: dts: Added PCIe DT nodes
Hou Zhiqiang
- [U-Boot] [PATCH 07/47] powerpc: T4240RDB: Disable legacy PCIe driver when DM_PCI is enabled
Hou Zhiqiang
- [U-Boot] [PATCH 08/47] configs: T4240RDB: Enable PCIe driver
Hou Zhiqiang
- [U-Boot] [PATCH 09/47] powerpc: T102xRDB: Compile legacy PCIe routines conditionally
Hou Zhiqiang
- [U-Boot] [PATCH 10/47] dm: pcie_fsl: Add T102x PCIe support
Hou Zhiqiang
- [U-Boot] [PATCH 11/47] t102x: dts: Added PCIe DT nodes
Hou Zhiqiang
- [U-Boot] [PATCH 12/47] powerpc: T102xRDB: Remove the useless macro CONFIG_ARCH_T1040
Hou Zhiqiang
- [U-Boot] [PATCH 13/47] powerpc: T102xRDB: Disable legacy PCIe driver when DM_PCI is enabled
Hou Zhiqiang
- [U-Boot] [PATCH 14/47] configs: T1024RDB: Enable PCIe driver
Hou Zhiqiang
- [U-Boot] [PATCH 15/47] powerpc: T104xRDB: Compile legacy PCIe routines conditionally
Hou Zhiqiang
- [U-Boot] [PATCH 16/47] dm: pcie_fsl: Add T104x PCIe support
Hou Zhiqiang
- [U-Boot] [PATCH 17/47] t104x: dts: Added PCIe DT nodes
Hou Zhiqiang
- [U-Boot] [PATCH 18/47] powerpc: T104xRDB: Disable legacy PCIe driver when DM_PCI is enabled
Hou Zhiqiang
- [U-Boot] [PATCH 19/47] configs: T1042D4RDB: Enable PCIe driver
Hou Zhiqiang
- [U-Boot] [PATCH 20/47] powerpc: p1_p2_rdb: Compile legacy PCIe routines conditionally
Hou Zhiqiang
- [U-Boot] [PATCH 21/47] dm: pcie_fsl: Add PCIe support for P1 and P2 series SoCs
Hou Zhiqiang
- [U-Boot] [PATCH 22/47] P1020: dts: Added PCIe DT nodes
Hou Zhiqiang
- [U-Boot] [PATCH 23/47] powerpc: p1_p2_rdb: Disable legacy PCIe driver when DM_PCI is enabled
Hou Zhiqiang
- [U-Boot] [PATCH 24/47] configs: P1020RDB: Enable PCIe driver
Hou Zhiqiang
- [U-Boot] [PATCH 25/47] P2020: dts: Added PCIe DT nodes
Hou Zhiqiang
- [U-Boot] [PATCH 26/47] configs: P2020RDB: Enable PCIe driver
Hou Zhiqiang
- [U-Boot] [PATCH 27/47] powerpc: p_corenet: Compile legacy PCIe routines conditionally
Hou Zhiqiang
- [U-Boot] [PATCH 28/47] dm: pcie_fsl: Add P2041 PCIe support
Hou Zhiqiang
- [U-Boot] [PATCH 29/47] P2041: dts: Added PCIe DT nodes
Hou Zhiqiang
- [U-Boot] [PATCH 30/47] powerpc: P2041RDB: Disable legacy PCIe driver when DM_PCI is enabled
Hou Zhiqiang
- [U-Boot] [PATCH 31/47] configs: P2041RDB: Enable PCIe driver
Hou Zhiqiang
- [U-Boot] [PATCH 32/47] dm: pcie_fsl: Add P3041 PCIe support
Hou Zhiqiang
- [U-Boot] [PATCH 33/47] P3041: dts: Added PCIe DT nodes
Hou Zhiqiang
- [U-Boot] [PATCH 34/47] powerpc: corenet_ds: Disable legacy PCIe driver when DM_PCI is enabled
Hou Zhiqiang
- [U-Boot] [PATCH 35/47] configs: P3041DS: Enable PCIe driver
Hou Zhiqiang
- [U-Boot] [PATCH 36/47] dm: pcie_fsl: Add P4080 PCIe support
Hou Zhiqiang
- [U-Boot] [PATCH 37/47] P4080: dts: Added PCIe DT nodes
Hou Zhiqiang
- [U-Boot] [PATCH 38/47] configs: P4080DS: Enable PCIe driver
Hou Zhiqiang
- [U-Boot] [PATCH 39/47] dm: pcie_fsl: Add P5040 PCIe support
Hou Zhiqiang
- [U-Boot] [PATCH 40/47] P5040: dts: Added PCIe DT nodes
Hou Zhiqiang
- [U-Boot] [PATCH 41/47] configs: P5040DS: Enable PCIe driver
Hou Zhiqiang
- [U-Boot] [PATCH 42/47] powerpc: MPC8548CDS: Compile legacy PCIe routines conditionally
Hou Zhiqiang
- [U-Boot] [PATCH 43/47] powerpc: MPC85xxCDS: Disable legacy PCI fixup when DM_PCI is selected
Hou Zhiqiang
- [U-Boot] [PATCH 44/47] dm: pcie_fsl: Add MPC8548 PCIe support
Hou Zhiqiang
- [U-Boot] [PATCH 45/47] MPC8548: dts: Added PCIe DT node
Hou Zhiqiang
- [U-Boot] [PATCH 46/47] powerpc: MPC8548CDS: Disable legacy PCIe driver when DM_PCI is enabled
Hou Zhiqiang
- [U-Boot] [PATCH 47/47] configs: MPC8548CDS: Enable PCIe driver
Hou Zhiqiang
- [U-Boot] [PATCH v1 1/7] mmc: fsl_esdhc: Add peripheral clock support
Yinbo Zhu
- [U-Boot] [PATCH v1 2/7] mmc: add a Kconfig option to enable the peripheral clock support
Yinbo Zhu
- [U-Boot] [PATCH v1 3/7] dts: armv8: add emmc hs200 support for ls1012ardb
Yinbo Zhu
- [U-Boot] [PATCH v1 4/7] dts: armv8: add emmc hs200 support for lx2160ardb
Yinbo Zhu
- [U-Boot] [PATCH v1 5/7] dts: armv8: add emmc hs200 support for ls1028ardb
Yinbo Zhu
- [U-Boot] [PATCH v1 6/7] mmc: fsl_esdhc: Add emmc hs200 support
Yinbo Zhu
- [U-Boot] [PATCH v1 7/7] configs: ls1012ardb/lx2160ardb/ls1028ardb: add hs200 config for esdhc
Yinbo Zhu
- [U-Boot] [PATCH 0/5] toradex: configblock: apalis-imx8 and colibri-imx8x fixes
Marcel Ziswiler
- [U-Boot] [PATCH 1/5] toradex: configblock: initialize MMC before switching partition
Marcel Ziswiler
- [U-Boot] [PATCH 2/5] toradex: configblock: generic wi-fi/bt handling
Marcel Ziswiler
- [U-Boot] [PATCH 3/5] toradex: configblock: fix colibri imx8x target
Marcel Ziswiler
- [U-Boot] [PATCH 4/5] toradex: configblock: fix apalis imx8 target
Marcel Ziswiler
- [U-Boot] [PATCH 5/5] toradex: configblock: fix long line
Marcel Ziswiler
- [U-Boot] [PATCH 4/5] toradex: configblock: fix apalis imx8 target
Marcel Ziswiler
- [U-Boot] [PATCH] colibri-imx6ull: fix vidargs
Marcel Ziswiler
- [U-Boot] [PATCH 4/5] toradex: configblock: fix apalis imx8 target
Marcel Ziswiler
- [U-Boot] [PATCH v2 0/5] toradex: configblock: apalis-imx8 and colibri-imx8x fixes
Marcel Ziswiler
- [U-Boot] [PATCH v2 1/5] toradex: configblock: initialize MMC before switching partition
Marcel Ziswiler
- [U-Boot] [PATCH v2 2/5] toradex: configblock: generic wi-fi/bt handling
Marcel Ziswiler
- [U-Boot] [PATCH v2 3/5] toradex: configblock: fix colibri imx8x target
Marcel Ziswiler
- [U-Boot] [PATCH v2 4/5] toradex: configblock: fix apalis imx8 target
Marcel Ziswiler
- [U-Boot] [PATCH v2 5/5] toradex: configblock: avoid line continuations
Marcel Ziswiler
- [U-Boot] Pull request: u-boot-riscv/master
uboot at andestech.com
- [U-Boot] Pull request: u-boot-nds32/master
uboot at andestech.com
- [U-Boot] Boot rootfs from FIT Image
deepakpradhan
- [U-Boot] [PATCH v5 06/18] clk: Provide struct clk for fixed rate clock (clk_fixed_rate.c)
sbabic at denx.de
- [U-Boot] [PATCH 3/5] mx7ulp_evk: Change APLL and its PFD0 frequencies
sbabic at denx.de
- [U-Boot] [PATCH] IMX: serial: dm: Set DM_FLAG_PRE_RELOC in the IMX uart driver
sbabic at denx.de
- [U-Boot] [PATCH 2/3] ARM: imx6q_logic: Enable SPL_DM with SPL_OF_CONTROL
sbabic at denx.de
- [U-Boot] [PATCH v1 02/11] cosmetic: Update comment in cmd/eeprom.c
sbabic at denx.de
- [U-Boot] [PATCH 4/7] warp7_bl33: configs: Enable CONFIG_OF_LIBFDT
sbabic at denx.de
- [U-Boot] [PATCH v1 3/3] colibri_imx6: configs: remove legacy usbboot command
sbabic at denx.de
- [U-Boot] [PATCH 3/7] warp7: include: configs: Differentiate bootscript address from loadaddr
sbabic at denx.de
- [U-Boot] [PATCH v6 5/6] pinctrl: mxs: Add support for i.MX2[38] mxs pinctrl driver
sbabic at denx.de
- [U-Boot] [PATCH] arm: dts: imx: fsl-imx8dx.dtsi: add gpio aliases to fix gpio command
sbabic at denx.de
- [U-Boot] [PATCH v5 11/18] clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)
sbabic at denx.de
- [U-Boot] [PATCH 5/6] ARM: imx: m53menlo: Convert WDT support to DM
sbabic at denx.de
- [U-Boot] [PATCH v2 4/5] toradex: configblock: fix apalis imx8 target
sbabic at denx.de
- [U-Boot] [PATCH v2 4/4] MAINTAINERS: Update lib/optee with my details
sbabic at denx.de
- [U-Boot] [PATCH v5 05/18] clk: Extend struct clk to provide clock type agnostic flags
sbabic at denx.de
- [U-Boot] [PATCH v2] serial: mxc: Add compatibles to NXP's serial driver (for imx21 and imx53)
sbabic at denx.de
- [U-Boot] [PATCH v1 07/11] DTS: Add imx6q-display5-u-boot.dtsi file with u-boot specific properties
sbabic at denx.de
- [U-Boot] [PATCH 6/7] warp7: include: configs: Specify an fdtovaddr
sbabic at denx.de
- [U-Boot] [PATCH] board: engicam: Remove bogus check for mmc for imx6ul isiot
sbabic at denx.de
- [U-Boot] [PATCH v1 3/3] ARM: imx: Disable 1Gbps support on MCCMON6's KSZ9031 PHY
sbabic at denx.de
- [U-Boot] [PATCH v2 4/4] doc: Update parallel NOR flash related information in README.falcon
sbabic at denx.de
- [U-Boot] [PATCH v5 07/18] clk: Introduce clk-provider.h to store Common Clock Framework's internals
sbabic at denx.de
- [U-Boot] [PATCH v6 1/6] ARM: dts: imx: Copy imx28 device tree related files from Linux kernel (v5.1.11)
sbabic at denx.de
- [U-Boot] [PATCH] configs: icore: Fix U-Boot proper loading from nand
sbabic at denx.de
- [U-Boot] [PATCH V2 1/2] watchdog: Split WDT from SPL_WDT
sbabic at denx.de
- [U-Boot] [PATCH v6 3/6] ARM: dts: imx: Provide 'gpio-ranges' for mxs_gpio driver
sbabic at denx.de
- [U-Boot] [PATCH v1 08/11] ARM: display5: Remove U_BOOT_DEVICE definition of serial_mxc
sbabic at denx.de
- [U-Boot] [PATCH v6 2/6] net: fec: Enable support for i.MX28 DM_ETH in the fec_mxc.c driver
sbabic at denx.de
- [U-Boot] [PATCH] ARM: imx6: DHCOM i.MX6 PDK: enable pad pull ups of SS lines of spi used for boot
sbabic at denx.de
- [U-Boot] [PATCH 5/7] warp7_bl33: configs: Enable CONFIG_OF_LIBFDT_OVERLAY
sbabic at denx.de
- [U-Boot] [PATCH v5 03/18] clk: Remove clock ID check in .get_rate() of clk_fixed_*
sbabic at denx.de
- [U-Boot] [PATCH v5 12/18] dm: clk: Extend clk_get_parent_rate() to support CLK_GET_RATE_NOCACHE flag
sbabic at denx.de
- [U-Boot] [PATCH v5 15/18] clk: sandbox: Adjust clk-mux.c to emulate reading divider value from HW
sbabic at denx.de
- [U-Boot] [PATCH 1/1] colibri_imx7: introduce androidboot wrapper
sbabic at denx.de
- [U-Boot] [PATCH 7/7] warp7: Specify a default CONFIG_OPTEE_LOAD_ADDR if non provided
sbabic at denx.de
- [U-Boot] [PATCH 1/1] colibri_imx7_emmc: enable CONFIG_ARMV7_BOOT_SEC_DEFAULT
sbabic at denx.de
- [U-Boot] [PATCH v5 16/18] clk: sandbox: Add sandbox test code for Common Clock Framework [CCF]
sbabic at denx.de
- [U-Boot] [PATCH 1/5] mx7ulp: Fix APLL num and denom setting issue
sbabic at denx.de
- [U-Boot] [PATCH v1 05/11] ARM: display5: Increase the pre-relocation malloc pool size to 4KiB
sbabic at denx.de
- [U-Boot] [PATCH v1 03/11] ARM: display5: Fix CS check after moving some SPI related CONFIGs to Kconfig
sbabic at denx.de
- [U-Boot] [PATCH v1 04/11] gpio: Add missing parenthesis to the GPIO_TO_PORT define
sbabic at denx.de
- [U-Boot] [PATCH] config: imx53: Disable support for EFI on HSC|DDC boards
sbabic at denx.de
- [U-Boot] [PATCH v1 2/3] apalis_imx6: configs: remove legacy usbboot command
sbabic at denx.de
- [U-Boot] [PATCH v2 2/2] opos6uldev: remove board_ehci_hcd_init function
sbabic at denx.de
- [U-Boot] [PATCH v2 1/5] toradex: configblock: initialize MMC before switching partition
sbabic at denx.de
- [U-Boot] [PATCH v3 1/3] ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite
sbabic at denx.de
- [U-Boot] [PATCH 3/3] doc: imx: Add documentation for nandbcb command
sbabic at denx.de
- [U-Boot] [PATCH v4 2/2] regulator: bd718x7: support ROHM BD71837 and BD71847 PMICs
sbabic at denx.de
- [U-Boot] [PATCH V2 1/4] misc: imx8: add sc_misc_get_temp
sbabic at denx.de
- [U-Boot] [PATCH 1/2] pwm: imx: add Kconfig support
sbabic at denx.de
- [U-Boot] [PATCH v1 2/3] ARM: imx: config: Disable support for USB on MCCMON6
sbabic at denx.de
- [U-Boot] [PATCH] mx6sxsabresd: imximage.cfg: Handle the CONFIG_SECURE_BOOT case
sbabic at denx.de
- [U-Boot] [PATCH] imx6dq: Fix chip version issue for rev1.3
sbabic at denx.de
- [U-Boot] [PATCH 1/7] warp7_bl33: configs: Enable FIT as the boot.scr format
sbabic at denx.de
- [U-Boot] [PATCH] configs: icorem6: Enable Nand bcb command
sbabic at denx.de
- [U-Boot] [PATCH V2 4/4] imx: imx8dx/qxp: enable thermal
sbabic at denx.de
- [U-Boot] [PATCH v2 3/4] Kconfig: Add CMD_SPL_NOR_OFS config for falcon boot argument offset
sbabic at denx.de
- [U-Boot] [PATCH 4/5] mx7ulp: Select the SCG1 APLL PFD as a system clock source
sbabic at denx.de
- [U-Boot] [PATCH v6 1/3] i.MX6: nand: add nandbcb command for imx
sbabic at denx.de
- [U-Boot] [PATCH v3 3/3] ARM: imx6: DHCOM i.MX6 PDK: config SPL to load U-Boot fitImage with mulitple DTs
sbabic at denx.de
- [U-Boot] [PATCH v2 1/4] Kconfig: Make CMD_SPL_NAND_OFS only available when proper memory is used
sbabic at denx.de
- [U-Boot] [PATCH 2/7] warp7: include: configs: Specify image name of bootscript in FIT
sbabic at denx.de
- [U-Boot] [PATCH v5 18/18] clk: Add MAINTAINERS entry for clocks (./drivers/clk/)
sbabic at denx.de
- [U-Boot] [PATCH v3] ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2C
sbabic at denx.de
- [U-Boot] [PATCH 2/2] colibri/apalis imx: drop DFU support
sbabic at denx.de
- [U-Boot] [PATCH v5 02/18] dm: Fix documentation entry as there is no UCLASS_CLOCK uclass
sbabic at denx.de
- [U-Boot] [PATCH v5 09/18] dm: clk: Define clk_get_parent_rate() for clk operations
sbabic at denx.de
- [U-Boot] [PATCH v5 04/18] clk: Extend struct clk to provide information regarding clock rate
sbabic at denx.de
- [U-Boot] [PATCH v2 3/5] toradex: configblock: fix colibri imx8x target
sbabic at denx.de
- [U-Boot] [PATCH v2 3/4] warp7: configs: bl33: Tidy up OPTEE defines
sbabic at denx.de
- [U-Boot] [PATCH v5 01/18] clk: doc: Add documentation entry for Common Clock Framework [CCF] (i.MX)
sbabic at denx.de
- [U-Boot] [PATCH 2/2] arm: imx8: don't duplicate build_info()
sbabic at denx.de
- [U-Boot] [PATCH 2/2] pwm: imx: add DM_PWM support
sbabic at denx.de
- [U-Boot] [PATCH v6 6/6] spi: mxs: Add support DM/DTS for i.MX28 mxs SPI driver (DM_SPI conversion)
sbabic at denx.de
- [U-Boot] [PATCH] colibri-imx6ull: fix vidargs
sbabic at denx.de
- [U-Boot] [PATCH v5 08/18] dm: clk: Define clk_get_parent() for clk operations
sbabic at denx.de
- [U-Boot] [PATCH v5 10/18] dm: clk: Define clk_get_by_id() for clk operations
sbabic at denx.de
- [U-Boot] [PATCH v1 06/11] DTS: imx: Add display5 board (imx6q based) device tree description (v5.1)
sbabic at denx.de
- [U-Boot] [PATCH v1 01/11] cosmetic: display5: Remove not needed comments
sbabic at denx.de
- [U-Boot] [PATCH v3 2/3] ARM: dts: imx: dh-imx6: Add DHCOM iMX6 Duallite PDK2 device tree
sbabic at denx.de
- [U-Boot] [PATCH v2 5/5] toradex: configblock: avoid line continuations
sbabic at denx.de
- [U-Boot] [PATCH V2 2/4] thermal: add i.MX8 thermal driver
sbabic at denx.de
- [U-Boot] [PATCH v6 4/6] gpio: mxs: Add support for DM/DTS in the mxs_gpio.c driver (DM_GPIO)
sbabic at denx.de
- [U-Boot] [PATCH v5 13/18] dts: sandbox: Add 'osc' clock for Common Clock Framework [CCF] testing
sbabic at denx.de
- [U-Boot] [PATCH 1/2] arm: imx8: factor out uart init code
sbabic at denx.de
- [U-Boot] [PATCH v2 2/4] Kconfig: cosmetic: Update description of CMD_SPL_NAND_OFS
sbabic at denx.de
- [U-Boot] [PATCH V2] ARM: imx: dh-imx6: Enable DM regulator
sbabic at denx.de
- [U-Boot] [PATCH 5/5] mx7ulp_evk: Update DDR freq to 352.8Mhz for ULP B0
sbabic at denx.de
- [U-Boot] [PATCH v5 14/18] clk: sandbox: Adjust clk-divider to emulate reading its value from HW
sbabic at denx.de
- [U-Boot] [PATCH] ARCH: imx: Call sata_remove() not on imx6 duallite/solo boards
sbabic at denx.de
- [U-Boot] [PATCH v2 2/5] toradex: configblock: generic wi-fi/bt handling
sbabic at denx.de
- [U-Boot] [PATCH 1/3] spl: imx6: Let spl_boot_device return USDHC1 or USDHC2
sbabic at denx.de
- [U-Boot] [PATCH 2/5] mx7ulp_evk: Update LPDDR3 script
sbabic at denx.de
- [U-Boot] [PATCH v2 1/4] optee: Make TZDRAM config options contingent on CONFIG_OPTEE
sbabic at denx.de
- [U-Boot] [PATCH v5 17/18] defconfig: sandbox: Enable SANDBOX_CLK_CCF to reuse generic CCF code
sbabic at denx.de
- [U-Boot] [PATCH v2 1/1] colibri_imx7: introduce androidboot wrapper
sbabic at denx.de
- [U-Boot] [PATCH v1 1/3] ARM: imx: cosmetic: Remove not needed comment from the mccmon6.h file
sbabic at denx.de
- [U-Boot] [PATCH 1/1] pico-imx7d: Enable DM_USB
sbabic at denx.de
- [U-Boot] [PATCH 3/3] ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init
sbabic at denx.de
- [U-Boot] [PATCH V2 2/2] watchdog: imx: Add DM support
sbabic at denx.de
- [U-Boot] [PATCH] Drop linker-generated array creation when CONFIG_CMDLINE is disabled
andrej.rosano at f-secure.com
- [U-Boot] [PATCH] Drop linker-generated array creation when CONFIG_CMDLINE is disabled
andrej.rosano at f-secure.com
- [U-Boot] [PATCH 00/16] Raspberry Pi 32/64 support
andrei at gherzan.ro
- [U-Boot] [PATCH 01/16] dts: Create a dtsi for BCM2835/6/7 specific configuration
andrei at gherzan.ro
- [U-Boot] [PATCH 02/16] dts: Add initial support for bcm2838
andrei at gherzan.ro
- [U-Boot] [PATCH 03/16] arm: mach-bcm283x: Define configs for RaspberryPi 4
andrei at gherzan.ro
- [U-Boot] [PATCH 04/16] arm: mach-bcm283x: Define mbox address for BCM2838
andrei at gherzan.ro
- [U-Boot] [PATCH 05/16] rpi: Add rpi_model entry for RaspberryPi 4
andrei at gherzan.ro
- [U-Boot] [PATCH 06/16] dt-bindings: Define BCM2838_CLOCK_EMMC2 needed for RaspberryPi 4
andrei at gherzan.ro
- [U-Boot] [PATCH 07/16] arm: bcm283x: Include definition for additional emmc clock
andrei at gherzan.ro
- [U-Boot] [PATCH 08/16] mmc: bcm2835_sdhci: Add support for bcm2711 device
andrei at gherzan.ro
- [U-Boot] [PATCH 09/16] arm: bcm283x: Define device base addresses for bcm2835
andrei at gherzan.ro
- [U-Boot] [PATCH 10/16] bcm2835 video: Bail out early if querying video information fails
andrei at gherzan.ro
- [U-Boot] [PATCH 11/16] bcm283x mbox: Correctly wait for space to send
andrei at gherzan.ro
- [U-Boot] [PATCH 12/16] config: rpi4: Add defconfig for rpi4-32
andrei at gherzan.ro
- [U-Boot] [PATCH 13/16] dts: bcm2838-rpi-4-b: Use the emmc2 interface for sdhci
andrei at gherzan.ro
- [U-Boot] [PATCH 14/16] rpi: Add memory map for bcm2838
andrei at gherzan.ro
- [U-Boot] [PATCH 15/16] configs: rpi4: Remove DWC2 and USB_ETHER configs
andrei at gherzan.ro
- [U-Boot] [PATCH 16/16] dts: bcm2838-rpi-4-b: Use the emmc2/2811 compatible string for SDHCI
andrei at gherzan.ro
- [U-Boot] [PATCH] rockchip: dts: rk3399: Add 'same-as-spl' for Rock PI 4
kever.yang at gmail.com
- [U-Boot] [PATCHv3] ARM: zynq: Add configuration for Z-turn board
tossel at gmail.com
- [U-Boot] [PATCH v3 0/3] arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards
xieqinick at gmail.com
- [U-Boot] [PATCH v3 1/3] arm64: dts: rockchip: Add support for Khadas Edge
xieqinick at gmail.com
- [U-Boot] [PATCH v3 2/3] arm64: dts: rockchip: Add support for Khadas Edge-V
xieqinick at gmail.com
- [U-Boot] [PATCH v3 3/3] arm64: dts: rockchip: Add support for Khadas Edge-Captain
xieqinick at gmail.com
- [U-Boot] [PATCH v2 31/31] binman: Add a test for nested and aligned sections
sjg at google.com
- [U-Boot] [PATCH v2 30/31] binman: Add an 'extract' command
sjg at google.com
- [U-Boot] [PATCH v2 29/31] binman: Support reading from CBFS entries
sjg at google.com
- [U-Boot] [PATCH v2 28/31] binman: Allow reading an entry from an image
sjg at google.com
- [U-Boot] [PATCH v2 27/31] binman: Allow for logging information to be displayed
sjg at google.com
- [U-Boot] [PATCH v2 25/31] binman: Convert Image to a subclass of Entry
sjg at google.com
- [U-Boot] [PATCH v2 26/31] binman: Support listing an image
sjg at google.com
- [U-Boot] [PATCH v2 24/31] binman: Support reading an image into an Image object
sjg at google.com
- [U-Boot] [PATCH v2 22/31] binman: Support locating an FDT map
sjg at google.com
- [U-Boot] [PATCH v2 23/31] binman: Support locating an image header
sjg at google.com
- [U-Boot] [PATCH v2 21/31] binman: Allow listing the entries in an image
sjg at google.com
- [U-Boot] [PATCH v2 20/31] binman: Detect bad CBFS file types
sjg at google.com
- [U-Boot] [PATCH v2 19/31] binman: Support FDT update for CBFS
sjg at google.com
- [U-Boot] [PATCH v2 18/31] binman: Use the cbfs memlen field only for uncompressed length
sjg at google.com
- [U-Boot] [PATCH v2 16/31] binman: Allow device-tree entries to be compressed
sjg at google.com
- [U-Boot] [PATCH v2 17/31] binman: Provide the actual data address for cbfs files
sjg at google.com
- [U-Boot] [PATCH v2 15/31] binman: Allow entries to expand after packing
sjg at google.com
- [U-Boot] [PATCH v2 14/31] binman: Add a control for post-pack entry expansion
sjg at google.com
- [U-Boot] [PATCH v2 13/31] binman: Add a return value to ProcessContentsUpdate()
sjg at google.com
- [U-Boot] [PATCH v2 12/31] binman: Call ProcessUpdateContents() consistently
sjg at google.com
- [U-Boot] [PATCH v2 10/31] binman: Allow easy importing of entry modules
sjg at google.com
- [U-Boot] [PATCH v2 11/31] binman: Fix up ProcessUpdateContents error and comments
sjg at google.com
- [U-Boot] [PATCH v2 09/31] binman: Drop an unused arg in Entry.Lookup()
sjg at google.com
- [U-Boot] [PATCH v2 08/31] binman: Move compression into the Entry base class
sjg at google.com
- [U-Boot] [PATCH v2 07/31] binman: Convert to use ArgumentParser
sjg at google.com
- [U-Boot] [PATCH v2 06/31] binman: Add an image header
sjg at google.com
- [U-Boot] [PATCH v2 05/31] binman: Add an FDT map
sjg at google.com
- [U-Boot] [PATCH v2 04/31] binman: Add a convenience functions for real-DTB tests
sjg at google.com
- [U-Boot] [PATCH v2 03/31] binman: Update help for new features
sjg at google.com
- [U-Boot] [PATCH v2 01/31] binman: Simplify the entry test
sjg at google.com
- [U-Boot] [PATCH v2 02/31] binman: Update future features
sjg at google.com
- [U-Boot] [PATCH v2 37/37] binman: Add support for fixed-offset files in CBFS
sjg at google.com
- [U-Boot] [PATCH v2 36/37] binman: Pad empty areas of the CBFS with files
sjg at google.com
- [U-Boot] [PATCH v2 34/37] binman: Add support for CBFS entries
sjg at google.com
- [U-Boot] [PATCH v2 35/37] binman: Add support for Intel IFWI entries
sjg at google.com
- [U-Boot] [PATCH v2 33/37] binman: Add a utility library for coreboot CBFS
sjg at google.com
- [U-Boot] [PATCH v2 32/37] patman: Add a function to write ifwitool
sjg at google.com
- [U-Boot] [PATCH v2 31/37] binman: Pass the toolpath to tests
sjg at google.com
- [U-Boot] [PATCH v2 30/37] binman: Allow preserving test directories
sjg at google.com
- [U-Boot] [PATCH v2 29/37] binman: Allow verbosity control when running tests
sjg at google.com
- [U-Boot] [PATCH v2 28/37] binman: Fix up the _DoTestFile() function -u argument
sjg at google.com
- [U-Boot] [PATCH v2 27/37] binman: Support ELF files for TPL
sjg at google.com
- [U-Boot] [PATCH v2 25/37] binman: Use tools compression function for blob handling
sjg at google.com
- [U-Boot] [PATCH v2 26/37] binman: Correct comment in u_boot_spl_elf
sjg at google.com
- [U-Boot] [PATCH v2 23/37] binman: Use the tools.Decompress method
sjg at google.com
- [U-Boot] [PATCH v2 24/37] binman: Drop unnecessary debug handling
sjg at google.com
- [U-Boot] [PATCH v2 22/37] patman: Add functions to compress and decompress data
sjg at google.com
- [U-Boot] [PATCH v2 21/37] binman: Allow text directly in the node
sjg at google.com
- [U-Boot] [PATCH v2 20/37] binman: Update entry.SetOffsetSize to be optional
sjg at google.com
- [U-Boot] [PATCH v2 19/37] binman: Don't assume there is an ME region
sjg at google.com
- [U-Boot] [PATCH v2 18/37] binman: Assume Intel descriptor is at the start of the image
sjg at google.com
- [U-Boot] [PATCH v2 17/37] binman: Ensure that coverage has access to site packages
sjg at google.com
- [U-Boot] [PATCH v2 16/37] binman: Add a function to decode an ELF file
sjg at google.com
- [U-Boot] [PATCH v2 15/37] binman: Add a function to create a sample ELF file
sjg at google.com
- [U-Boot] [PATCH v2 13/37] binman: Use a better error for missing Intel descriptor
sjg at google.com
- [U-Boot] [PATCH v2 14/37] binman: Detect skipped tests
sjg at google.com
- [U-Boot] [PATCH v2 12/37] binman: Tidy up help for --indir
sjg at google.com
- [U-Boot] [PATCH v2 11/37] binman: Add missing comments toentry
sjg at google.com
- [U-Boot] [PATCH] dm: device: make power domain calls optional
sjg at google.com
- [U-Boot] [PATCH] buildman: fix invocation examples typos
sjg at google.com
- [U-Boot] [PATCH] dm: uclass: fix comment copy/paste error
sjg at google.com
- [U-Boot] [PATCH] clk: initialize clk->data when using default xlate
sjg at google.com
- [U-Boot] [PATCH] common: fdt_support: Add missing cpu_to_fdt32() to fdt_pci_dma_ranges()
sjg at google.com
- [U-Boot] [PATCH 3/4] dm: core: Set correct "status" value for a node
sjg at google.com
- [U-Boot] [PATCH 4/4] dm: Fix parameter description of dev_read_name()
sjg at google.com
- [U-Boot] [PATCH 2/4] dm: core: Call clk_set_defaults() during probe() only for a valid ofnode
sjg at google.com
- [U-Boot] [PATCH 1/4] dm: timer: Skip device that does not have a valid ofnode in pre_probe()
sjg at google.com
- [U-Boot] [PATCH] fdt: make fdt_get_base_address() return OF_BAD_ADDR when "reg" not found
sjg at google.com
- [U-Boot] [PATCH 52/53] binman: Correct the error message for invalid path
sjg at google.com
- [U-Boot] [PATCH 53/53] binman: Add command-line support for replacing entries
sjg at google.com
- [U-Boot] [PATCH 51/53] binman: Split control.WriteEntryToImage() into separate functions
sjg at google.com
- [U-Boot] [PATCH 50/53] binman: Update control.WriteEntry() to support writing the map
sjg at google.com
- [U-Boot] [PATCH 49/53] binman: Move control.WriteEntry further down the file
sjg at google.com
- [U-Boot] [PATCH 48/53] binman: Clean up all output directories in tests
sjg at google.com
- [U-Boot] [PATCH 47/53] binman: Add a test function to clean up the output dir
sjg at google.com
- [U-Boot] [PATCH 46/53] binman: Update state when replacing device-tree entries
sjg at google.com
- [U-Boot] [PATCH 45/53] patman: Reset the output directory when it is removed
sjg at google.com
- [U-Boot] [PATCH 44/53] binman: Support replacing data in a cbfs
sjg at google.com
- [U-Boot] [PATCH 43/53] binman: Update Entry.WriteData() to handle special sections
sjg at google.com
- [U-Boot] [PATCH 42/53] binman: Update Entry.ReadEntry() to work through classes
sjg at google.com
- [U-Boot] [PATCH 41/53] binman: Add a prefix before CBFS hex offsets
sjg at google.com
- [U-Boot] [PATCH 40/53] binman: Add a few more features to the wishlist
sjg at google.com
- [U-Boot] [PATCH 39/53] binman: Place Intel descriptor at image start
sjg at google.com
- [U-Boot] [PATCH 38/53] binman: Adjust fmap to ignore CBFS files
sjg at google.com
- [U-Boot] [PATCH 37/53] libfdt: Copy the struct region in fdt_resize()
sjg at google.com
- [U-Boot] [PATCH 35/53] binman: Update the _testing entry to support shrinkage
sjg at google.com
- [U-Boot] [PATCH 36/53] binman: Support shrinking a entry after packing
sjg at google.com
- [U-Boot] [PATCH 34/53] binman: Allow updating entries that change size
sjg at google.com
- [U-Boot] [PATCH 32/53] binman: Move Image.BuildImage() into a single function
sjg at google.com
- [U-Boot] [PATCH 33/53] binman: Add more tests for image header position
sjg at google.com
- [U-Boot] [PATCH 30/53] binman: Update documentation for image creation
sjg at google.com
- [U-Boot] [PATCH 31/53] binman: Write the original input fdtmap to a file
sjg at google.com
- [U-Boot] [PATCH 29/53] binman: Add info to allow safely repacking an image later
sjg at google.com
- [U-Boot] [PATCH 27/53] binman: Tidy up _SetupDtb() to use its own temporary file
sjg at google.com
- [U-Boot] [PATCH 28/53] binman: Support updating entries in an existing image
sjg at google.com
- [U-Boot] [PATCH 26/53] binman: Allow the fdtmap to remain unchanged
sjg at google.com
- [U-Boot] [PATCH 25/53] binman: Add a constant for common entry properties
sjg at google.com
- [U-Boot] [PATCH 24/53] binman: Add a function to obtain the image for an Entry
sjg at google.com
- [U-Boot] [PATCH 23/53] binman: Adjust Entry to read the node in a separate call
sjg at google.com
- [U-Boot] [PATCH 22/53] binman: Add an image name into the fdtmap
sjg at google.com
- [U-Boot] [PATCH 21/53] binman: Store the entry in output_fdt_files
sjg at google.com
- [U-Boot] [PATCH 20/53] binman: Allow state functions to fail to return data
sjg at google.com
- [U-Boot] [PATCH 19/53] binman: Support loading entry data from a file
sjg at google.com
- [U-Boot] [PATCH 18/53] binman: Store image fdtmap when loading from a file
sjg at google.com
- [U-Boot] [PATCH 17/53] dtoc: Update Fdt.GetNode() to handle the root node
sjg at google.com
- [U-Boot] [PATCH 16/53] dtoc: Update Fdt.FromData() to allow a name
sjg at google.com
- [U-Boot] [PATCH 15/53] binman: Show a helpful error when a DT property is missing
sjg at google.com
- [U-Boot] [PATCH 14/53] binman: Add a bit of logging in entries when packing
sjg at google.com
- [U-Boot] [PATCH 13/53] patman: Update tout to avoid open-coding the debug levels
sjg at google.com
- [U-Boot] [PATCH 12/53] binman: Drop state.fdt_set as this is not needed
sjg at google.com
- [U-Boot] [PATCH 11/53] binman: Simplify state.fdt_subset
sjg at google.com
- [U-Boot] [PATCH 10/53] binman: Adjust state.fdt_files to be keyed by entry type
sjg at google.com
- [U-Boot] [PATCH 09/53] binman: Adjust GetFdt() to be keyed by etype
sjg at google.com
- [U-Boot] [PATCH 08/53] binman: Rename state.GetFdt()
sjg at google.com
- [U-Boot] [PATCH 07/53] binman: Rename state.GetFdts()
sjg at google.com
- [U-Boot] [PATCH 06/53] binman: Convert GetFdtSet() to use a dict
sjg at google.com
- [U-Boot] [PATCH 05/53] binman: Move image/fdt code into PrepareImagesAndDtbs()
sjg at google.com
- [U-Boot] [PATCH 04/53] binman: Use print() to print output
sjg at google.com
- [U-Boot] [PATCH 03/53] binman: Move GetFdtSet() into blob_dtb
sjg at google.com
- [U-Boot] [PATCH 02/53] binman: Move image-processing code into a function
sjg at google.com
- [U-Boot] [PATCH 01/53] dtoc: Return a non-zero exit code when tests fail
sjg at google.com
- [U-Boot] [PATCH] Makefile: fix implementation of BINMAN_DEBUG
sjg at google.com
- [U-Boot] [PATCH 1/2] mtd: spi: Add SYS_SPI_BLOCK_SIZE to Kconfig
tien.fong.chee at intel.com
- [U-Boot] [PATCH 2/2] drivers: ubi: Adding UBI loader for SPI flash
tien.fong.chee at intel.com
- [U-Boot] [PATCH] video: arm: rpi: Bail out early if querying video information fails
matthias.bgg at kernel.org
- [U-Boot] [PATCH] ARM: bcm283x mbox: Fix send status register
matthias.bgg at kernel.org
- [U-Boot] [PATCH 1/2] libfdt: fdt_address_cells() and fdt_size_cells()
matthias.bgg at kernel.org
- [U-Boot] [PATCH 2/2] libfdt: return correct value if #size-cells property is not present
matthias.bgg at kernel.org
- [U-Boot] U-Boot FT81x Graphics Driver
harsha kiran
- [U-Boot] [PATCH] Fix unreliable detection of DRAM size on Orange Pi 3
megous at megous.com
- [U-Boot] [PULL] u-boot-atmel-fixes-2019.07-b
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH v5 00/10] spi: Add Atmel QuadSPI driver
Eugen.Hristev at microchip.com
- [U-Boot] [PULL] u-boot-atmel-2019.10-a
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH 1/5] armv8: fsl-layerscape: add missing sec jr base address defines
laurentiu.tudor at nxp.com
- [U-Boot] [PATCH 2/5] armv8: fsl-layerscape: add base addresses for several devices
laurentiu.tudor at nxp.com
- [U-Boot] [PATCH 3/5] armv8: fsl-layerscape: make icid setup endianness aware
laurentiu.tudor at nxp.com
- [U-Boot] [PATCH 4/5] armv8: ls1088a: add icid setup for platform devices
laurentiu.tudor at nxp.com
- [U-Boot] [PATCH 5/5] armv8: ls1028a: add icid setup for platform devices
laurentiu.tudor at nxp.com
- [U-Boot] [PATCH 00/52] Support i.MX8MM/N
peng.fan at nxp.com
- [U-Boot] [PATCH 01/52] linux: compat: guard PAGE_SIZE
peng.fan at nxp.com
- [U-Boot] [PATCH 02/52] dm: clk: ignore default settings when node not valid
peng.fan at nxp.com
- [U-Boot] [PATCH 03/52] pinctrl: imx: use devfdt_get_addr_size_index
peng.fan at nxp.com
- [U-Boot] [PATCH 04/52] i2c: mxc: add CONFIG_CLK support
peng.fan at nxp.com
- [U-Boot] [PATCH 05/52] tools: imx8m_image: align spl bin image size
peng.fan at nxp.com
- [U-Boot] [PATCH 06/52] ddr: imx8m: fix ddr firmware location when enable SPL OF
peng.fan at nxp.com
- [U-Boot] [PATCH 07/52] tools: imx8mimage: fix HDMI/FIT parsing
peng.fan at nxp.com
- [U-Boot] [PATCH 08/52] imx8m: add image cfg for i.MX8MM lpddr4
peng.fan at nxp.com
- [U-Boot] [PATCH 09/52] imx: add IMX8MQ kconfig entry
peng.fan at nxp.com
- [U-Boot] [PATCH 10/52] imx: add IMX8MM kconfig entry
peng.fan at nxp.com
- [U-Boot] [PATCH 11/52] imx: imx8mm: add clock bindings header
peng.fan at nxp.com
- [U-Boot] [PATCH 12/52] imx: add i.MX8MM cpu type
peng.fan at nxp.com
- [U-Boot] [PATCH 13/52] imx: spl: add spl_board_boot_device for i.MX8MM
peng.fan at nxp.com
- [U-Boot] [PATCH 14/52] imx8m: update imx-regs for i.MX8MM
peng.fan at nxp.com
- [U-Boot] [PATCH 15/52] imx: add get_cpu_rev support for i.MX8MM
peng.fan at nxp.com
- [U-Boot] [PATCH 16/52] imx8m: rename clock to clock_imx8mq
peng.fan at nxp.com
- [U-Boot] [PATCH 17/52] imx8m: restructure clock.h
peng.fan at nxp.com
- [U-Boot] [PATCH 18/52] imx8m: add clk support for i.MX8MM
peng.fan at nxp.com
- [U-Boot] [PATCH 19/52] imx8m: soc: probe clk before relocation
peng.fan at nxp.com
- [U-Boot] [PATCH 20/52] imx8m: add pin header for i.MX8MM
peng.fan at nxp.com
- [U-Boot] [PATCH 21/52] imx: add i.MX8MM PE property
peng.fan at nxp.com
- [U-Boot] [PATCH 22/52] imx8m: Fix MMU table issue for OPTEE memory
peng.fan at nxp.com
- [U-Boot] [PATCH 23/52] imx8m: set BYPASS ID SWAP to avoid AXI bus errors
peng.fan at nxp.com
- [U-Boot] [PATCH 24/52] imx8m: Configure trustzone region 0 for non-secure access
peng.fan at nxp.com
- [U-Boot] [PATCH 25/52] imx8m: soc: enable SCTR clock before timer init
peng.fan at nxp.com
- [U-Boot] [PATCH 26/52] serial: Kconfig: make MXC_UART usable for MX7 and IMX8M
peng.fan at nxp.com
- [U-Boot] [PATCH 27/52] clk: imx: add Kconfig entry for i.MX8MM
peng.fan at nxp.com
- [U-Boot] [PATCH 28/52] clk: imx: add i.MX8MM clk driver
peng.fan at nxp.com
- [U-Boot] [PATCH 29/52] imx: add i.MX8MM EVK board support
peng.fan at nxp.com
- [U-Boot] [PATCH 30/52] ddr: imx8m: Fix ddr4 driver build issue
peng.fan at nxp.com
- [U-Boot] [PATCH 31/52] imx8mq: Update the ddrc QoS setting for B1 chip
peng.fan at nxp.com
- [U-Boot] [PATCH 32/52] driver: ddr: Refine the ddr init driver on imx8m
peng.fan at nxp.com
- [U-Boot] [PATCH 33/52] ddr: imx8m: Fix the ddr init hang on imx8mq
peng.fan at nxp.com
- [U-Boot] [PATCH 34/52] imx: add i.MX8MN kconfig entry
peng.fan at nxp.com
- [U-Boot] [PATCH 35/52] imx8mn: support get_cpu_rev
peng.fan at nxp.com
- [U-Boot] [PATCH 36/52] imx8m: add clk support for i.MX8MN
peng.fan at nxp.com
- [U-Boot] [PATCH 37/52] imx8mn: set BYPASS ID SWAP to avoid AXI bus errors
peng.fan at nxp.com
- [U-Boot] [PATCH 38/52] imx: add i.MX8MN PE property
peng.fan at nxp.com
- [U-Boot] [PATCH 39/52] imx8mn: add pin header
peng.fan at nxp.com
- [U-Boot] [PATCH 40/52] imx: spl: use spl_board_boot_device for i.MX8MN
peng.fan at nxp.com
- [U-Boot] [PATCH 41/52] spl: pass args to board_return_to_bootrom
peng.fan at nxp.com
- [U-Boot] [PATCH 42/52] imx: add rom api support
peng.fan at nxp.com
- [U-Boot] [PATCH 43/52] imx: cpu: restrict get_boot_device
peng.fan at nxp.com
- [U-Boot] [PATCH 44/52] imx8mn: add get_boot_device
peng.fan at nxp.com
- [U-Boot] [PATCH 45/52] power: pmic: add SPL_DM_PMIC
peng.fan at nxp.com
- [U-Boot] [PATCH 46/52] tools: imx8mimage: add ROM VERSION
peng.fan at nxp.com
- [U-Boot] [PATCH 47/52] pinctrl: imx8m: support i.MX8MN
peng.fan at nxp.com
- [U-Boot] [PATCH 48/52] tools: imx8m_image: support ddr4 firmware
peng.fan at nxp.com
- [U-Boot] [PATCH 49/52] clk: imx: add i.MX8MN clk support
peng.fan at nxp.com
- [U-Boot] [PATCH 50/52] imx8m: add i.MX8MN ddr4 image cfg file
peng.fan at nxp.com
- [U-Boot] [PATCH 51/52] imx: add dtsi for i.MX8MN
peng.fan at nxp.com
- [U-Boot] [PATCH 52/52] imx: add i.MX8MN DDR4 board support
peng.fan at nxp.com
- [U-Boot] [PATCH] ARM: omap3: overo: Fix MMC init for SPL
anselm.busse at outlook.com
- [U-Boot] friendlyARM s5p4418 Migration to Video DM - Splash Screen
pm.stefan
- [U-Boot] [PATCH v2] video: backlight: fix pwm invertation
marvin24 at posteo.de
- [U-Boot] Export Function Mechanism on i386 Minnowmax board
prateek
- [U-Boot] [PATCH] spl_mmc: always use find_mmc_device() to get mmc handler
jason.zhu at rock-chips.com
- [U-Boot] Hi, I am new to U-Boot, how do I get started?
slahss ss
- [U-Boot] Hi, I am new to U-Boot, how do I get started?
slahss ss
- [U-Boot] [PATCH 0/3] USB: Add cadence USB3 gadget driver and host driver
sherry sun
- [U-Boot] [PATCH 1/3] USB: gadget: Add the cadence USB3 gadget driver
sherry sun
- [U-Boot] [PATCH 2/3] USB: host: Add the USB3 host driver
sherry sun
- [U-Boot] [PATCH 3/3] USB: gadget: core: introduce ->udc_set_speed() method
sherry sun
- [U-Boot] [PATCH 0/4] Make some changes to SDP
sherry sun
- [U-Boot] [PATCH 1/4] imx: spl: Change USB boot device type
sherry sun
- [U-Boot] [PATCH 2/4] SDP: use CONFIG_SDP_LOADADDR as default load address
sherry sun
- [U-Boot] [PATCH 3/4] SDP: fix wrong usb request size and add high speed endpoint descriptor
sherry sun
- [U-Boot] [PATCH 4/4] SDP: Call usb_gadget_initialize and usb_gadget_release to support UDC
sherry sun
- [U-Boot] [PATCH v0] rockchip: rk3399: Add ROC-RK3399-PC support
djw at t-chip.com.cn
- [U-Boot] [PATCH 1/2] watchdog: omap_wdt: Convert watchdog driver to use DT and DM
sunil.m at techveda.org
- [U-Boot] [PATCH 2/2] watchdog: omap_wdt: Disable DM watchdog support in SPL
sunil.m at techveda.org
- [U-Boot] [PATCH 1/2] configs: am335x_boneblack_vboot_defconfig: Fix regression by enabling BLK and DM support, disable in SPL
sunil.m at techveda.org
- [U-Boot] [PATCH 2/2] configs: am335x_boneblack_vboot_defconfig: Add DM for SPI and Flash devices
sunil.m at techveda.org
- [U-Boot] [PATCH v2 1/2] watchdog: omap_wdt: Convert watchdog driver to use DT and DM
sunil.m at techveda.org
- [U-Boot] [PATCH v2 2/2] watchdog: omap_wdt: Disable DM watchdog support in SPL
sunil.m at techveda.org
- [U-Boot] [PATCH] Add validation for icache/dcache arguments - arguments different from off/on/flush are currently silently ignored.
eric.perie at yahoo.com
- [U-Boot] [PATCH v2 0/7] sunxi: Add H6 DDR3 DRAM support
Jernej Škrabec
Last message date:
Wed Jul 31 22:27:30 UTC 2019
Archived on: Wed Jul 31 22:27:34 UTC 2019
This archive was generated by
Pipermail 0.09 (Mailman edition).