[U-Boot] [PATCH v2] net: mvpp2: support setting hardware addresses from ethernet core

[Matt Pelland]

mvpp2 already has support for setting MAC addresses but this
functionality was not exposed to the ethernet core. This commit exposes
this functionality so that MAC address assignments stored in U-Boot's
environment are correctly applied before Linux boots.

Signed-off-by: Matt Pelland <mpelland at starry.com>
---
Changes since v1:
 - Correctly specify the return type of mvpp2_write_hwaddr
 - Correctly return the status code of mvpp2_prs_update_mac_da

 drivers/net/mvpp2.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index bcc6fe92a9..bd89725e77 100644
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -5321,6 +5321,13 @@ static void mvpp2_stop(struct udevice *dev)
 	mvpp2_cleanup_txqs(port);
 }
 
+static int mvpp2_write_hwaddr(struct udevice *dev)
+{
+	struct mvpp2_port *port = dev_get_priv(dev);
+
+	return mvpp2_prs_update_mac_da(port, port->dev_addr);
+}
+
 static int mvpp22_smi_phy_addr_cfg(struct mvpp2_port *port)
 {
 	writel(port->phyaddr, port->priv->iface_base +
@@ -5525,6 +5532,7 @@ static const struct eth_ops mvpp2_ops = {
 	.send		= mvpp2_send,
 	.recv		= mvpp2_recv,
 	.stop		= mvpp2_stop,
+	.write_hwaddr	= mvpp2_write_hwaddr
 };
 
 static struct driver mvpp2_driver = {
-- 
2.21.0