[U-Boot] [PATCH 13/14] davinci: omapl138-lcdk: enable driver-model in SPL

Adam Ford aford173 at gmail.com
Tue Jul 9 13:34:18 UTC 2019


On Tue, Jul 9, 2019 at 2:55 AM Bartosz Golaszewski <brgl at bgdev.pl> wrote:
>
> From: Bartosz Golaszewski <bgolaszewski at baylibre.com>
>
> Enable CONFIG_SPL_DM and enable the driver model for serial by defining
> an appropriate device in the board file for da850-lcdk.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> ---
>  board/davinci/da8xxevm/omapl138_lcdk.c | 16 ++++++++++++++++
>  configs/omapl138_lcdk_defconfig        |  5 +++++
>  2 files changed, 21 insertions(+)
>
> diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
> index 7f8c28b953..578d928443 100644
> --- a/board/davinci/da8xxevm/omapl138_lcdk.c
> +++ b/board/davinci/da8xxevm/omapl138_lcdk.c
> @@ -14,6 +14,8 @@
>  #include <asm/arch/hardware.h>
>  #include <asm/ti-common/davinci_nand.h>
>  #include <asm/io.h>
> +#include <ns16550.h>
> +#include <dm/platdata.h>
>  #include <linux/errno.h>
>  #include <asm/mach-types.h>
>  #include <asm/arch/davinci_misc.h>
> @@ -355,3 +357,17 @@ int board_mmc_init(bd_t *bis)
>  }
>  #endif
>  #endif
> +
> +#ifdef CONFIG_SPL_BUILD
> +static const struct ns16550_platdata serial_pdata = {
> +       .base = DAVINCI_UART2_BASE,
> +       .reg_shift = 2,
> +       .clock = 228000000,
> +       .fcr = UART_FCR_DEFVAL,
> +};
> +
> +U_BOOT_DEVICE(omapl138_uart) = {
> +       .name = "ns16550_serial",
> +       .platdata = &serial_pdata,
> +};
> +#endif

Is the above part necessary since SPL_OF_CONTROL is defined?  I know
the da850evm doesn't need this anymore and I was able to remove it
when converting to SPL_OF_CONTROL.

See: https://patchwork.ozlabs.org/patch/1048078/

adam

> diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
> index c4eebb3612..26b4950f8f 100644
> --- a/configs/omapl138_lcdk_defconfig
> +++ b/configs/omapl138_lcdk_defconfig
> @@ -33,10 +33,13 @@ CONFIG_CMD_MTDPARTS=y
>  CONFIG_CMD_DIAG=y
>  CONFIG_CMD_UBI=y
>  CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
>  CONFIG_DEFAULT_DEVICE_TREE="da850-lcdk"
> +CONFIG_SPL_OF_PLATDATA=y
>  CONFIG_ENV_IS_IN_NAND=y
>  CONFIG_NET_RANDOM_ETHADDR=y
>  CONFIG_DM=y
> +CONFIG_SPL_DM=y
>  CONFIG_DM_I2C=y
>  CONFIG_SYS_I2C_DAVINCI=y
>  CONFIG_DM_MMC=y
> @@ -51,6 +54,8 @@ CONFIG_SF_DEFAULT_SPEED=30000000
>  CONFIG_DM_ETH=y
>  CONFIG_MII=y
>  CONFIG_DRIVER_TI_EMAC=y
> +CONFIG_SPECIFY_CONSOLE_INDEX=y
>  CONFIG_DM_SERIAL=y
>  CONFIG_SYS_NS16550=y
>  CONFIG_USE_TINY_PRINTF=y
> +# CONFIG_SPL_OF_LIBFDT is not set
> --
> 2.21.0
>


More information about the U-Boot mailing list