[U-Boot] [RESEND PATCH 0/5] amlogic: add support for the SEI Robotic SEI510

[Neil Armstrong]

The SEI510 board is based on the Amlogic S905X2 SoC
from the Amlogic G12A SoC family.

The board has the following specifications :
- Amlogic S905X2 ARM Cortex-A53 quad-core SoC
- XGB DDR4 SDRAM
- 10/100 Ethernet (Internal PHY)
- 1 x USB 3.0 Host
- eMMC
- SDcard
- Infrared receiver
- SDIO WiFi Module

The board default behaviour is for booting Android and triggers
fastboot on recovery or reboot mode.

Jerome Brunet (1):
  boards: meson: add g12a sei510

Neil Armstrong (4):
  ARM: dts: Import Amlogic G12A SEI510 DT from Linux 5.3-rc1
  configs: meson64: permit redefining ENV_SIZE
  ARM: meson: Add support for fastboot_set_reboot_flag()
  configs: sei510: disable PSCI_RESET to support fastboot reboot_flag

 arch/arm/dts/Makefile                |   1 +
 arch/arm/dts/meson-g12a-sei510.dts   | 502 +++++++++++++++++++++++++++
 arch/arm/include/asm/arch-meson/sm.h |  18 +
 arch/arm/mach-meson/board-common.c   |  33 ++
 arch/arm/mach-meson/sm.c             | 155 +++++++++
 board/amlogic/sei510/MAINTAINERS     |   5 +
 board/amlogic/sei510/Makefile        |   6 +
 board/amlogic/sei510/README          | 123 +++++++
 board/amlogic/sei510/sei510.c        |  26 ++
 configs/sei510_defconfig             |  75 ++++
 include/configs/meson64.h            |   2 +
 include/configs/sei510.h             | 137 ++++++++
 12 files changed, 1083 insertions(+)
 create mode 100644 arch/arm/dts/meson-g12a-sei510.dts
 create mode 100644 board/amlogic/sei510/MAINTAINERS
 create mode 100644 board/amlogic/sei510/Makefile
 create mode 100644 board/amlogic/sei510/README
 create mode 100644 board/amlogic/sei510/sei510.c
 create mode 100644 configs/sei510_defconfig
 create mode 100644 include/configs/sei510.h

-- 
2.22.0