[U-Boot] [PATCH] ARM: dts: stih410-b2260: Sync DT with kernel v5.2
Patrice Chotard
patrice.chotard at st.com
Tue Jul 23 13:33:30 UTC 2019
Synchronize U-boot DT with kernel v5.2 for stih410-b2260.
Update stih410-b2260-u-boot.dtsi accordingly.
Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---
arch/arm/dts/stih407-clock.dtsi | 113 ++++++------
arch/arm/dts/stih407-family.dtsi | 200 ++++++++++++----------
arch/arm/dts/stih407-pinctrl.dtsi | 129 +++++---------
arch/arm/dts/stih410-b2260-u-boot.dtsi | 17 ++
arch/arm/dts/stih410-b2260.dts | 128 +++++++-------
arch/arm/dts/stih410-clock.dtsi | 110 ++++++------
arch/arm/dts/stih410-pinctrl.dtsi | 7 +-
arch/arm/dts/stih410.dtsi | 227 ++++---------------------
8 files changed, 370 insertions(+), 561 deletions(-)
diff --git a/arch/arm/dts/stih407-clock.dtsi b/arch/arm/dts/stih407-clock.dtsi
index 13029c03d7..1ab40db7c9 100644
--- a/arch/arm/dts/stih407-clock.dtsi
+++ b/arch/arm/dts/stih407-clock.dtsi
@@ -1,38 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 STMicroelectronics R&D Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <dt-bindings/clock/stih407-clks.h>
/ {
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ clk_sysin: clk-sysin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- /*
- * Fixed 30MHz oscillator inputs to SoC
- */
- clk_sysin: clk-sysin {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <30000000>;
- };
-
- /*
- * ARM Peripheral clock for timers
- */
- arm_periph_clk: clk-m-a9-periphs {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
-
- clocks = <&clk_m_a9>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
/*
* A9 PLL.
*/
@@ -62,35 +53,22 @@
<&clockgen_a9_pll 0>,
<&clk_s_c0_flexgen 13>,
<&clk_m_a9_ext2f_div2>;
- };
- /*
- * ARM Peripheral clock for timers
- */
- clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&clk_s_c0_flexgen 13>;
-
- clock-output-names = "clk-m-a9-ext2f-div2";
-
- clock-div = <2>;
- clock-mult = <1>;
- };
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
- /*
- * Bootloader initialized system infrastructure clock for
- * serial devices.
- */
- clk_ext2f_a9: clockgen-c0 at 13 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <200000000>;
- clock-output-names = "clk-s-icn-reg-0";
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
};
- clockgen-a at 090ff000 {
+ clockgen-a at 90ff000 {
compatible = "st,clkgen-c32";
reg = <0x90ff000 0x1000>;
@@ -101,6 +79,7 @@
clocks = <&clk_sysin>;
clock-output-names = "clk-s-a0-pll-ofd-0";
+ clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
};
clk_s_a0_flexgen: clk-s-a0-flexgen {
@@ -112,6 +91,7 @@
<&clk_sysin>;
clock-output-names = "clk-ic-lmi0";
+ clock-critical = <CLK_IC_LMI0>;
};
};
@@ -126,9 +106,10 @@
"clk-s-c0-fs0-ch1",
"clk-s-c0-fs0-ch2",
"clk-s-c0-fs0-ch3";
+ clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
};
- clk_s_c0: clockgen-c at 09103000 {
+ clk_s_c0: clockgen-c at 9103000 {
compatible = "st,clkgen-c32";
reg = <0x9103000 0x1000>;
@@ -139,6 +120,7 @@
clocks = <&clk_sysin>;
clock-output-names = "clk-s-c0-pll0-odf-0";
+ clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
};
clk_s_c0_pll1: clk-s-c0-pll1 {
@@ -194,6 +176,27 @@
"clk-main-disp",
"clk-aux-disp",
"clk-compo-dvp";
+ clock-critical = <CLK_PROC_STFE>,
+ <CLK_ICN_CPU>,
+ <CLK_TX_ICN_DMU>,
+ <CLK_EXT2F_A9>,
+ <CLK_ICN_LMI>,
+ <CLK_ICN_SBC>;
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_s_c0_flexgen 13>;
+
+ clock-output-names = "clk-m-a9-ext2f-div2";
+
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
};
};
@@ -210,7 +213,7 @@
"clk-s-d0-fs0-ch3";
};
- clockgen-d0 at 09104000 {
+ clockgen-d0 at 9104000 {
compatible = "st,clkgen-c32";
reg = <0x9104000 0x1000>;
@@ -244,13 +247,7 @@
"clk-s-d2-fs0-ch3";
};
- clk_tmdsout_hdmi: clk-tmdsout-hdmi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
- clockgen-d2 at x9106000 {
+ clockgen-d2 at 9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
diff --git a/arch/arm/dts/stih407-family.dtsi b/arch/arm/dts/stih407-family.dtsi
index 6c6de58029..7c36c37260 100644
--- a/arch/arm/dts/stih407-family.dtsi
+++ b/arch/arm/dts/stih407-family.dtsi
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 STMicroelectronics Limited.
* Author: Giuseppe Cavallaro <peppe.cavallaro at st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
*/
#include "stih407-pinctrl.dtsi"
#include <dt-bindings/mfd/st-lpc.h>
@@ -20,7 +17,13 @@
#size-cells = <1>;
ranges;
- dmu_reserved: rproc at 44000000 {
+ gp0_reserved: rproc at 45000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x45000000 0x00400000>;
+ no-map;
+ };
+
+ delta_reserved: rproc at 44000000 {
compatible = "shared-dma-pool";
reg = <0x44000000 0x01000000>;
no-map;
@@ -47,6 +50,7 @@
clocks = <&clk_m_a9>;
clock-names = "cpu";
clock-latency = <100000>;
+ cpu0-supply = <&pwm_regulator>;
st,syscfg = <&syscfg_core 0x8e0>;
};
cpu at 1 {
@@ -65,19 +69,19 @@
};
};
- intc: interrupt-controller at 08761000 {
+ intc: interrupt-controller at 8761000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x08761000 0x1000>, <0x08760100 0x100>;
};
- scu at 08760000 {
+ scu at 8760000 {
compatible = "arm,cortex-a9-scu";
reg = <0x08760000 0x1000>;
};
- timer at 08760200 {
+ timer at 8760200 {
interrupt-parent = <&intc>;
compatible = "arm,cortex-a9-global-timer";
reg = <0x08760200 0x100>;
@@ -85,7 +89,7 @@
clocks = <&arm_periph_clk>;
};
- l2: cache-controller {
+ l2: cache-controller at 8762000 {
compatible = "arm,pl310-cache";
reg = <0x08762000 0x1000>;
arm,data-latency = <3 3 3>;
@@ -118,24 +122,28 @@
ranges;
compatible = "simple-bus";
- restart {
+ restart: restart-controller at 0 {
compatible = "st,stih407-restart";
+ reg = <0 0>;
st,syscfg = <&syscfg_sbc_reg>;
status = "okay";
};
- powerdown: powerdown-controller {
+ powerdown: powerdown-controller at 0 {
compatible = "st,stih407-powerdown";
+ reg = <0 0>;
#reset-cells = <1>;
};
- softreset: softreset-controller {
+ softreset: softreset-controller at 0 {
compatible = "st,stih407-softreset";
+ reg = <0 0>;
#reset-cells = <1>;
};
- picophyreset: picophyreset-controller {
+ picophyreset: picophyreset-controller at 0 {
compatible = "st,stih407-picophyreset";
+ reg = <0 0>;
#reset-cells = <1>;
};
@@ -167,6 +175,13 @@
syscfg_core: core-syscfg at 92b0000 {
compatible = "st,stih407-core-syscfg", "syscon";
reg = <0x92b0000 0x1000>;
+
+ sti_sasg_codec: sti-sasg-codec {
+ compatible = "st,stih407-sas-codec";
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ st,syscfg = <&syscfg_core>;
+ };
};
syscfg_lpm: lpm-syscfg at 94b5100 {
@@ -174,8 +189,9 @@
reg = <0x94b5100 0x1000>;
};
- irq-syscfg {
+ irq-syscfg at 0 {
compatible = "st,stih407-irq-syscfg";
+ reg = <0 0>;
st,syscfg = <&syscfg_core>;
st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
<ST_IRQ_SYSCFG_PMU_1>;
@@ -187,22 +203,21 @@
vtg_main: sti-vtg-main at 8d02800 {
compatible = "st,vtg";
reg = <0x8d02800 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
};
vtg_aux: sti-vtg-aux at 8d00200 {
compatible = "st,vtg";
reg = <0x8d00200 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
};
serial at 9830000 {
compatible = "st,asc";
reg = <0x9830000 0x2c>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial0>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ /* Pinctrl moved out to a per-board configuration */
status = "disabled";
};
@@ -210,7 +225,7 @@
serial at 9831000 {
compatible = "st,asc";
reg = <0x9831000 0x2c>;
- interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial1>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
@@ -221,7 +236,7 @@
serial at 9832000 {
compatible = "st,asc";
reg = <0x9832000 0x2c>;
- interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial2>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
@@ -233,7 +248,7 @@
sbc_serial0: serial at 9530000 {
compatible = "st,asc";
reg = <0x9530000 0x2c>;
- interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial0>;
clocks = <&clk_sysin>;
@@ -244,7 +259,7 @@
serial at 9531000 {
compatible = "st,asc";
reg = <0x9531000 0x2c>;
- interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>;
clocks = <&clk_sysin>;
@@ -374,8 +389,9 @@
status = "disabled";
};
- usb2_picophy0: phy1 {
+ usb2_picophy0: phy1 at 0 {
compatible = "st,stih407-usb2-phy";
+ reg = <0 0>;
#phy-cells = <0>;
st,syscfg = <&syscfg_core 0x100 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
@@ -383,12 +399,13 @@
reset-names = "global", "port";
};
- miphy28lp_phy: miphy28lp at 9b22000 {
+ miphy28lp_phy: miphy28lp at 0 {
compatible = "st,miphy28lp-phy";
st,syscfg = <&syscfg_core>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ reg = <0 0>;
phy_port0: port at 9b22000 {
reg = <0x9b22000 0xff>,
@@ -458,6 +475,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -470,6 +489,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -482,6 +503,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi3_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -494,6 +517,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi4_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -507,6 +532,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi10_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -519,6 +546,8 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi11_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -531,16 +560,18 @@
clock-names = "ssc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi12_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- mmc0: sdhci at 09060000 {
+ mmc0: sdhci at 9060000 {
compatible = "st,sdhci-stih407", "st,sdhci";
status = "disabled";
reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
reg-names = "mmc", "top-mmc-delay";
- interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0>;
@@ -550,12 +581,12 @@
bus-width = <8>;
};
- mmc1: sdhci at 09080000 {
+ mmc1: sdhci at 9080000 {
compatible = "st,sdhci-stih407", "st,sdhci";
status = "disabled";
reg = <0x09080000 0x7ff>;
reg-names = "mmc";
- interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sd1>;
@@ -563,7 +594,6 @@
clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
<&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
resets = <&softreset STIH407_MMC1_SOFTRESET>;
- reset-names = "softreset";
bus-width = <4>;
};
@@ -590,7 +620,7 @@
compatible = "st,ahci";
reg = <0x9b20000 0x1000>;
- interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hostc";
phys = <&phy_port0 PHY_TYPE_SATA>;
@@ -613,7 +643,7 @@
compatible = "st,ahci";
reg = <0x9b28000 0x1000>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hostc";
phys = <&phy_port1 PHY_TYPE_SATA>;
@@ -654,11 +684,12 @@
dwc3: dwc3 at 9900000 {
compatible = "snps,dwc3";
reg = <0x09900000 0x100000>;
- interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
- dr_mode = "peripheral";
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
phy-names = "usb2-phy", "usb3-phy";
phys = <&usb2_picophy0>,
<&phy_port2 PHY_TYPE_USB3>;
+ snps,dis_u3_susphy_quirk;
};
};
@@ -667,7 +698,7 @@
compatible = "st,sti-pwm";
#pwm-cells = <2>;
reg = <0x9810000 0x68>;
- interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
clock-names = "pwm";
@@ -682,6 +713,7 @@
compatible = "st,sti-pwm";
#pwm-cells = <2>;
reg = <0x9510000 0x68>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1_chan0_default
&pinctrl_pwm1_chan1_default
@@ -694,14 +726,14 @@
status = "disabled";
};
- rng10: rng at 08a89000 {
+ rng10: rng at 8a89000 {
compatible = "st,rng";
reg = <0x08a89000 0x1000>;
clocks = <&clk_sysin>;
status = "okay";
};
- rng11: rng at 08a8a000 {
+ rng11: rng at 8a8a000 {
compatible = "st,rng";
reg = <0x08a8a000 0x1000>;
clocks = <&clk_sysin>;
@@ -720,8 +752,8 @@
resets = <&softreset STIH407_ETH1_SOFTRESET>;
reset-names = "stmmaceth";
- interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
- <GIC_SPI 99 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_wake_irq";
/* DMA Bus Mode */
@@ -735,26 +767,14 @@
<&clk_s_c0_flexgen CLK_ETH_PHY>;
};
- cec: sti-cec at 094a087c {
- compatible = "st,stih-cec";
- reg = <0x94a087c 0x64>;
- clocks = <&clk_sysin>;
- clock-names = "cec-clk";
- interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
- interrupt-names = "cec-irq";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_cec0_default>;
- resets = <&softreset STIH407_LPM_SOFTRESET>;
- };
-
- rng10: rng at 08a89000 {
+ rng10: rng at 8a89000 {
compatible = "st,rng";
reg = <0x08a89000 0x1000>;
clocks = <&clk_sysin>;
status = "okay";
};
- rng11: rng at 08a8a000 {
+ rng11: rng at 8a8a000 {
compatible = "st,rng";
reg = <0x08a8a000 0x1000>;
clocks = <&clk_sysin>;
@@ -764,7 +784,7 @@
mailbox0: mailbox at 8f00000 {
compatible = "st,stih407-mailbox";
reg = <0x8f00000 0x1000>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
mbox-name = "a9";
status = "okay";
@@ -794,9 +814,24 @@
status = "okay";
};
- st231_delta: st231-delta at 44000000 {
+ st231_gp0: st231-gp0 at 0 {
compatible = "st,st231-rproc";
- memory-region = <&dmu_reserved>;
+ reg = <0 0>;
+ memory-region = <&gp0_reserved>;
+ resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
+ reset-names = "sw_reset";
+ clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+ clock-frequency = <600000000>;
+ st,syscfg = <&syscfg_core 0x22c>;
+ #mbox-cells = <1>;
+ mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+ mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
+ };
+
+ st231_delta: st231-delta at 0 {
+ compatible = "st,st231-rproc";
+ reg = <0 0>;
+ memory-region = <&delta_reserved>;
resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
reset-names = "sw_reset";
clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
@@ -819,7 +854,7 @@
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <16>;
#dma-cells = <3>;
};
@@ -837,9 +872,11 @@
<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <16>;
#dma-cells = <3>;
+
+ status = "disabled";
};
/* fdma free running */
@@ -850,20 +887,15 @@
<0x8e77000 0x1000>,
<0x8e78000 0x8000>;
reg-names = "slimcore", "dmem", "peripherals", "imem";
- interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <16>;
#dma-cells = <3>;
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
- };
- sti_sasg_codec: sti-sasg-codec {
- compatible = "st,stih407-sas-codec";
- #sound-dai-cells = <1>;
status = "disabled";
- st,syscfg = <&syscfg_core>;
};
sti_uni_player0: sti-uni-player at 8d80000 {
@@ -875,7 +907,7 @@
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
assigned-clock-rates = <50000000>;
reg = <0x8d80000 0x158>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 2 0 1>;
dma-names = "tx";
@@ -891,7 +923,7 @@
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
assigned-clock-rates = <50000000>;
reg = <0x8d81000 0x158>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 3 0 1>;
dma-names = "tx";
@@ -907,7 +939,7 @@
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
assigned-clock-rates = <50000000>;
reg = <0x8d82000 0x158>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 4 0 1>;
dma-names = "tx";
@@ -923,7 +955,7 @@
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
assigned-clock-rates = <50000000>;
reg = <0x8d85000 0x158>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 7 0 1>;
dma-names = "tx";
@@ -935,7 +967,7 @@
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
reg = <0x8d83000 0x158>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 5 0 1>;
dma-names = "rx";
@@ -947,32 +979,22 @@
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
reg = <0x8d84000 0x158>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 6 0 1>;
dma-names = "rx";
status = "disabled";
};
- rc: rc at 09518000 {
- compatible = "st,comms-irb";
- reg = <0x09518000 0x234>;
- interrupts = <GIC_SPI 132 IRQ_TYPE_NONE>;
- rx-mode = "infrared";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ir
- &pinctrl_uhf
- &pinctrl_tx
- &pinctrl_tx_od>;
- clocks = <&clk_sysin>;
- resets = <&softreset STIH407_IRB_SOFTRESET>;
-
- status = "disabled";
- };
-
- socinfo {
- compatible = "st,stih407-socinfo";
- st,syscfg = <&syscfg_core>;
+ delta0 at 0 {
+ compatible = "st,st-delta";
+ reg = <0 0>;
+ clock-names = "delta",
+ "delta-st231",
+ "delta-flash-promip";
+ clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+ <&clk_s_c0_flexgen CLK_ST231_DMU>,
+ <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
};
};
};
diff --git a/arch/arm/dts/stih407-pinctrl.dtsi b/arch/arm/dts/stih407-pinctrl.dtsi
index f27ae21f67..2cf335714c 100644
--- a/arch/arm/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/dts/stih407-pinctrl.dtsi
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 STMicroelectronics Limited.
* Author: Giuseppe Cavallaro <peppe.cavallaro at st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
*/
#include "st-pincfg.h"
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -45,18 +42,18 @@
};
soc {
- pin-controller-sbc {
+ pin-controller-sbc at 961f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-sbc-pinctrl";
st,syscfg = <&syscfg_sbc>;
reg = <0x0961f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09610000 0x6000>;
- pio0: gpio at 09610000 {
+ pio0: gpio at 9610000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -64,7 +61,7 @@
reg = <0x0 0x100>;
st,bank-name = "PIO0";
};
- pio1: gpio at 09611000 {
+ pio1: gpio at 9611000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -72,7 +69,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO1";
};
- pio2: gpio at 09612000 {
+ pio2: gpio at 9612000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -80,7 +77,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO2";
};
- pio3: gpio at 09613000 {
+ pio3: gpio at 9613000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -88,7 +85,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO3";
};
- pio4: gpio at 09614000 {
+ pio4: gpio at 9614000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -97,7 +94,7 @@
st,bank-name = "PIO4";
};
- pio5: gpio at 09615000 {
+ pio5: gpio at 9615000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -369,18 +366,18 @@
};
};
- pin-controller-front0 {
+ pin-controller-front0 at 920f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-front-pinctrl";
st,syscfg = <&syscfg_front>;
reg = <0x0920f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09200000 0x10000>;
- pio10: pio at 09200000 {
+ pio10: pio at 9200000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -388,7 +385,7 @@
reg = <0x0 0x100>;
st,bank-name = "PIO10";
};
- pio11: pio at 09201000 {
+ pio11: pio at 9201000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -396,7 +393,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO11";
};
- pio12: pio at 09202000 {
+ pio12: pio at 9202000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -404,7 +401,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO12";
};
- pio13: pio at 09203000 {
+ pio13: pio at 9203000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -412,7 +409,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO13";
};
- pio14: pio at 09204000 {
+ pio14: pio at 9204000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -420,7 +417,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO14";
};
- pio15: pio at 09205000 {
+ pio15: pio at 9205000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -428,7 +425,7 @@
reg = <0x5000 0x100>;
st,bank-name = "PIO15";
};
- pio16: pio at 09206000 {
+ pio16: pio at 9206000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -436,7 +433,7 @@
reg = <0x6000 0x100>;
st,bank-name = "PIO16";
};
- pio17: pio at 09207000 {
+ pio17: pio at 9207000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -444,7 +441,7 @@
reg = <0x7000 0x100>;
st,bank-name = "PIO17";
};
- pio18: pio at 09208000 {
+ pio18: pio at 9208000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -452,7 +449,7 @@
reg = <0x8000 0x100>;
st,bank-name = "PIO18";
};
- pio19: pio at 09209000 {
+ pio19: pio at 9209000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -465,19 +462,16 @@
serial0 {
pinctrl_serial0: serial0-0 {
st,pins {
- tx = <&pio17 0 ALT1 OUT>;
- rx = <&pio17 1 ALT1 IN>;
+ tx = <&pio17 0 ALT1 OUT>;
+ rx = <&pio17 1 ALT1 IN>;
};
};
- pinctrl_serial0_rts: serial0_rts {
- st,pins {
- rts = <&pio17 3 ALT1 OUT>;
- };
- };
-
- pinctrl_serial0_cts: serial0_cts {
+ pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl {
st,pins {
+ tx = <&pio17 0 ALT1 OUT>;
+ rx = <&pio17 1 ALT1 IN>;
cts = <&pio17 2 ALT1 IN>;
+ rts = <&pio17 3 ALT1 OUT>;
};
};
};
@@ -932,18 +926,18 @@
};
};
- pin-controller-front1 {
+ pin-controller-front1 at 921f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-front-pinctrl";
st,syscfg = <&syscfg_front>;
reg = <0x0921f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09210000 0x10000>;
- pio20: pio at 09210000 {
+ pio20: pio at 9210000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -965,18 +959,18 @@
};
};
- pin-controller-rear {
+ pin-controller-rear at 922f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-rear-pinctrl";
st,syscfg = <&syscfg_rear>;
reg = <0x0922f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irqmux";
ranges = <0 0x09220000 0x6000>;
- pio30: gpio at 09220000 {
+ pio30: gpio at 9220000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -984,7 +978,7 @@
reg = <0x0 0x100>;
st,bank-name = "PIO30";
};
- pio31: gpio at 09221000 {
+ pio31: gpio at 9221000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -992,7 +986,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO31";
};
- pio32: gpio at 09222000 {
+ pio32: gpio at 9222000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -1000,7 +994,7 @@
reg = <0x2000 0x100>;
st,bank-name = "PIO32";
};
- pio33: gpio at 09223000 {
+ pio33: gpio at 9223000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -1008,7 +1002,7 @@
reg = <0x3000 0x100>;
st,bank-name = "PIO33";
};
- pio34: gpio at 09224000 {
+ pio34: gpio at 9224000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -1016,7 +1010,7 @@
reg = <0x4000 0x100>;
st,bank-name = "PIO34";
};
- pio35: gpio at 09225000 {
+ pio35: gpio at 9225000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -1026,41 +1020,6 @@
st,retime-pin-mask = <0x7f>;
};
- dvo {
- pinctrl_dvo: dvo {
- st,pins {
- hs = <&pio30 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- vs = <&pio30 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- de = <&pio30 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- ck = <&pio30 3 ALT2 (OE | CLKNOTDATA) 0>;
- d0 = <&pio30 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d1 = <&pio30 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d2 = <&pio30 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d3 = <&pio30 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d4 = <&pio31 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d5 = <&pio31 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d6 = <&pio31 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d7 = <&pio31 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d8 = <&pio31 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d9 = <&pio31 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d10 = <&pio31 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d11 = <&pio31 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d12 = <&pio32 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d13 = <&pio32 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d14 = <&pio32 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d15 = <&pio32 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d16 = <&pio32 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d17 = <&pio32 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d18 = <&pio32 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d19 = <&pio32 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d20 = <&pio33 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d21 = <&pio33 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d22 = <&pio33 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- d23 = <&pio33 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- };
- };
- };
-
i2c4 {
pinctrl_i2c4_default: i2c4-default {
st,pins {
@@ -1195,18 +1154,18 @@
};
};
- pin-controller-flash {
+ pin-controller-flash at 923f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-flash-pinctrl";
st,syscfg = <&syscfg_flash>;
reg = <0x0923f080 0x4>;
reg-names = "irqmux";
- interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "irqmux";
ranges = <0 0x09230000 0x3000>;
- pio40: gpio at 09230000 {
+ pio40: gpio at 9230000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -1214,7 +1173,7 @@
reg = <0 0x100>;
st,bank-name = "PIO40";
};
- pio41: gpio at 09231000 {
+ pio41: gpio at 9231000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -1222,7 +1181,7 @@
reg = <0x1000 0x100>;
st,bank-name = "PIO41";
};
- pio42: gpio at 09232000 {
+ pio42: gpio at 9232000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
diff --git a/arch/arm/dts/stih410-b2260-u-boot.dtsi b/arch/arm/dts/stih410-b2260-u-boot.dtsi
index 83916319fc..897c42146a 100644
--- a/arch/arm/dts/stih410-b2260-u-boot.dtsi
+++ b/arch/arm/dts/stih410-b2260-u-boot.dtsi
@@ -9,8 +9,25 @@
soc {
st_dwc3: dwc3 at 8f94000 {
dwc3: dwc3 at 9900000 {
+ dr_mode = "peripheral";
phys = <&usb2_picophy0>;
};
};
+
+ ohci0: usb at 9a03c00 {
+ compatible = "generic-ohci";
+ };
+
+ ehci0: usb at 9a03e00 {
+ compatible = "generic-ehci";
+ };
+
+ ohci1: usb at 9a83c00 {
+ compatible = "generic-ohci";
+ };
+
+ ehci1: usb at 9a83e00 {
+ compatible = "generic-ehci";
+ };
};
};
diff --git a/arch/arm/dts/stih410-b2260.dts b/arch/arm/dts/stih410-b2260.dts
index 54250e2518..4fbd8e9eb5 100644
--- a/arch/arm/dts/stih410-b2260.dts
+++ b/arch/arm/dts/stih410-b2260.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2016 STMicroelectronics (R&D) Limited.
* Author: Patrice Chotard <patrice.chotard at st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
/dts-v1/;
#include "stih410.dtsi"
@@ -15,68 +12,79 @@
compatible = "st,stih410-b2260", "st,stih410";
chosen {
- bootargs = "console=ttyAS1,115200";
- linux,stdout-path = &uart1;
+ bootargs = "clk_ignore_unused";
stdout-path = &uart1;
};
- memory {
+ memory at 40000000 {
device_type = "memory";
reg = <0x40000000 0x40000000>;
};
aliases {
- ttyAS1 = &uart1;
+ serial1 = &uart1;
ethernet0 = ðernet0;
};
- soc {
-
- leds {
- compatible = "gpio-leds";
- user_green_1 {
- label = "User_green_1";
- gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
+ leds {
+ compatible = "gpio-leds";
+ user_green_1 {
+ label = "User_green_1";
+ gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
- user_green_2 {
- label = "User_green_2";
- gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ user_green_2 {
+ label = "User_green_2";
+ gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
- user_green_3 {
- label = "User_green_3";
- gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ user_green_3 {
+ label = "User_green_3";
+ gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
- user_green_4 {
- label = "User_green_4";
- gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ user_green_4 {
+ label = "User_green_4";
+ gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
- wifi_yellow {
- label = "Wifi_yellow";
- gpios = <&pio4 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "wifi-activity";
- default-state = "off";
+ sound: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "STI-B2260";
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,dai-link at 0 {
+ reg = <0>;
+ /* DAC */
+ format = "i2s";
+ mclk-fs = <128>;
+ cpu {
+ sound-dai = <&sti_uni_player0>;
};
- bt_blue {
- label = "Bluetooth_blue";
- gpios = <&pio3 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "hci0-power";
- default-state = "off";
+ codec {
+ sound-dai = <&sti_hdmi>;
};
};
+ };
+ soc {
/* Low speed expansion connector */
uart0: serial at 9830000 {
label = "LS-UART0";
+ pinctrl-names = "default", "no-hw-flowctrl";
+ pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>;
+ pinctrl-1 = <&pinctrl_serial0>;
+ rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -119,14 +127,14 @@
status = "okay";
};
- mmc0: sdhci at 09060000 {
+ mmc0: sdhci at 9060000 {
pinctrl-0 = <&pinctrl_sd0>;
bus-width = <4>;
status = "okay";
};
/* high speed expansion connector */
- mmc1: sdhci at 09080000 {
+ mmc1: sdhci at 9080000 {
status = "okay";
};
@@ -138,11 +146,11 @@
status = "okay";
};
- usb2_picophy1: phy2 {
+ usb2_picophy1: phy2 at 0 {
status = "okay";
};
- usb2_picophy2: phy3 {
+ usb2_picophy2: phy3 at 0 {
status = "okay";
};
@@ -183,17 +191,17 @@
sti_uni_player0: sti-uni-player at 8d80000 {
status = "okay";
};
-
/* SSC11 to HDMI */
hdmiddc: i2c at 9541000 {
/* HDMI V1.3a supports Standard mode only */
clock-frequency = <100000>;
st,i2c-min-scl-pulse-width-us = <0>;
- st,i2c-min-sda-pulse-width-us = <1>;
+ st,i2c-min-sda-pulse-width-us = <5>;
status = "okay";
};
- miphy28lp_phy: miphy28lp at 9b22000 {
+ miphy28lp_phy: miphy28lp at 0 {
+
phy_port1: port at 9b2a000 {
st,osc-force-ext;
};
@@ -202,25 +210,5 @@
sata1: sata at 9b28000 {
status = "okay";
};
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "STI-B2260";
- status = "okay";
-
- simple-audio-card,dai-link at 0 {
- /* DAC */
- format = "i2s";
- mclk-fs = <128>;
- cpu {
- sound-dai = <&sti_uni_player0>;
- };
-
- codec {
- sound-dai = <&sti_hdmi>;
- };
- };
- };
-
};
};
diff --git a/arch/arm/dts/stih410-clock.dtsi b/arch/arm/dts/stih410-clock.dtsi
index 8598effd6c..81a8c25d7b 100644
--- a/arch/arm/dts/stih410-clock.dtsi
+++ b/arch/arm/dts/stih410-clock.dtsi
@@ -1,12 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 STMicroelectronics R&D Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <dt-bindings/clock/stih410-clks.h>
/ {
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ clk_sysin: clk-sysin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ clock-output-names = "CLK_SYSIN";
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
@@ -14,27 +27,6 @@
compatible = "st,stih410-clk", "simple-bus";
- /*
- * Fixed 30MHz oscillator inputs to SoC
- */
- clk_sysin: clk-sysin {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <30000000>;
- clock-output-names = "CLK_SYSIN";
- };
-
- /*
- * ARM Peripheral clock for timers
- */
- arm_periph_clk: clk-m-a9-periphs {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&clk_m_a9>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
/*
* A9 PLL.
*/
@@ -64,35 +56,19 @@
<&clockgen_a9_pll 0>,
<&clk_s_c0_flexgen 13>,
<&clk_m_a9_ext2f_div2>;
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
};
- /*
- * ARM Peripheral clock for timers
- */
- clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
-
- clocks = <&clk_s_c0_flexgen 13>;
-
- clock-output-names = "clk-m-a9-ext2f-div2";
-
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- /*
- * Bootloader initialized system infrastructure clock for
- * serial devices.
- */
- clk_ext2f_a9: clockgen-c0 at 13 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <200000000>;
- clock-output-names = "clk-s-icn-reg-0";
- };
-
- clockgen-a at 090ff000 {
+ clockgen-a at 90ff000 {
compatible = "st,clkgen-c32";
reg = <0x90ff000 0x1000>;
@@ -134,7 +110,7 @@
clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
};
- clk_s_c0: clockgen-c at 09103000 {
+ clk_s_c0: clockgen-c at 9103000 {
compatible = "st,clkgen-c32";
reg = <0x9103000 0x1000>;
@@ -208,11 +184,27 @@
"clk-clust-hades",
"clk-hwpe-hades",
"clk-fc-hades";
- clock-critical = <CLK_ICN_CPU>,
+ clock-critical = <CLK_PROC_STFE>,
+ <CLK_ICN_CPU>,
<CLK_TX_ICN_DMU>,
<CLK_EXT2F_A9>,
<CLK_ICN_LMI>,
<CLK_ICN_SBC>;
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_s_c0_flexgen 13>;
+
+ clock-output-names = "clk-m-a9-ext2f-div2";
+
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
};
};
@@ -229,7 +221,7 @@
"clk-s-d0-fs0-ch3";
};
- clockgen-d0 at 09104000 {
+ clockgen-d0 at 9104000 {
compatible = "st,clkgen-c32";
reg = <0x9104000 0x1000>;
@@ -265,13 +257,7 @@
"clk-s-d2-fs0-ch3";
};
- clk_tmdsout_hdmi: clk-tmdsout-hdmi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
- clockgen-d2 at x9106000 {
+ clockgen-d2 at 9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
diff --git a/arch/arm/dts/stih410-pinctrl.dtsi b/arch/arm/dts/stih410-pinctrl.dtsi
index b3e9dfc81c..e6eadd1244 100644
--- a/arch/arm/dts/stih410-pinctrl.dtsi
+++ b/arch/arm/dts/stih410-pinctrl.dtsi
@@ -1,16 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 STMicroelectronics Limited.
* Author: Peter Griffin <peter.griffin at linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
*/
#include "st-pincfg.h"
/ {
soc {
- pin-controller-rear {
+ pin-controller-rear at 922f080 {
usb0 {
pinctrl_usb0: usb2-0 {
diff --git a/arch/arm/dts/stih410.dtsi b/arch/arm/dts/stih410.dtsi
index b59b110989..6d847019c5 100644
--- a/arch/arm/dts/stih410.dtsi
+++ b/arch/arm/dts/stih410.dtsi
@@ -1,67 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 STMicroelectronics Limited.
* Author: Peter Griffin <peter.griffin at linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
*/
#include "stih410-clock.dtsi"
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
bdisp0 = &bdisp0;
};
- cpus {
- cpu at 0 {
- st,syscfg = <&syscfg_core 0x8e0>;
- st,syscfg-eng = <&syscfg_opp 0x4 0x0>;
- clocks = <&clk_m_a9>;
- operating-points-v2 = <&cpu0_opp_table>;
- };
- cpu at 1 {
- clocks = <&clk_m_a9>;
- operating-points-v2 = <&cpu0_opp_table>;
- };
- };
-
- cpu0_opp_table: opp_table0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp at 1500000000 {
- opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
- opp-hz = /bits/ 64 <1500000000>;
- clock-latency-ns = <10000000>;
- opp-suspend;
- };
- opp at 1200000000 {
- opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
- opp-hz = /bits/ 64 <1200000000>;
- clock-latency-ns = <10000000>;
- };
- opp at 800000000 {
- opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
- opp-hz = /bits/ 64 <800000000>;
- clock-latency-ns = <10000000>;
- };
- opp at 400000000 {
- opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
- opp-hz = /bits/ 64 <400000000>;
- clock-latency-ns = <10000000>;
- };
- };
-
soc {
- syscfg_opp: @08a6583c {
- compatible = "syscon";
- reg = <0x08a6583c 0x8>;
- };
-
- usb2_picophy1: phy2 {
+ usb2_picophy1: phy2 at 0 {
compatible = "st,stih407-usb2-phy";
+ reg = <0 0>;
#phy-cells = <0>;
st,syscfg = <&syscfg_core 0xf8 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
@@ -71,8 +25,9 @@
status = "disabled";
};
- usb2_picophy2: phy3 {
+ usb2_picophy2: phy3 at 0 {
compatible = "st,stih407-usb2-phy";
+ reg = <0 0>;
#phy-cells = <0>;
st,syscfg = <&syscfg_core 0xfc 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
@@ -83,15 +38,14 @@
};
ohci0: usb at 9a03c00 {
- compatible = "generic-ohci";
+ compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
- interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset";
-
phys = <&usb2_picophy1>;
phy-names = "usb";
@@ -99,9 +53,9 @@
};
ehci0: usb at 9a03e00 {
- compatible = "generic-ehci";
+ compatible = "st,st-ehci-300x";
reg = <0x9a03e00 0x100>;
- interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
@@ -116,15 +70,14 @@
};
ohci1: usb at 9a83c00 {
- compatible = "generic-ohci";
+ compatible = "st,st-ohci-300x";
reg = <0x9a83c00 0x100>;
- interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset";
-
phys = <&usb2_picophy2>;
phy-names = "usb";
@@ -132,9 +85,9 @@
};
ehci1: usb at 9a83e00 {
- compatible = "generic-ehci";
+ compatible = "st,st-ehci-300x";
reg = <0x9a83e00 0x100>;
- interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
@@ -142,18 +95,18 @@
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset";
-
phys = <&usb2_picophy2>;
phy-names = "usb";
status = "disabled";
};
- sti-display-subsystem {
+ sti-display-subsystem at 0 {
compatible = "st,sti-display-subsystem";
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0 0>;
assigned-clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_c0_pll1 0>,
@@ -243,10 +196,10 @@
sti_hdmi: sti-hdmi at 8d04000 {
compatible = "st,stih407-hdmi";
- #sound-dai-cells = <0>;
reg = <0x8d04000 0x1000>;
reg-names = "hdmi-reg";
- interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "irq";
clock-names = "pix",
"tmds",
@@ -262,7 +215,7 @@
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
- hdmi,hpd-gpio = <&pio5 3>;
+ hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
@@ -283,24 +236,7 @@
<&clk_s_d2_quadfs 1>;
};
- sti-dvo at 8d00400 {
- compatible = "st,stih407-dvo";
- status = "disabled";
- reg = <0x8d00400 0x200>;
- reg-names = "dvo-reg";
- clock-names = "dvo_pix",
- "dvo",
- "main_parent",
- "aux_parent";
- clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>,
- <&clk_s_d2_flexgen CLK_DVO>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_dvo>;
- };
-
- sti-hqvdp at 9c000000 {
+ sti-hqvdp at 9c00000 {
compatible = "st,stih407-hqvdp";
reg = <0x9C00000 0x100000>;
clock-names = "hqvdp", "pix_main";
@@ -315,7 +251,7 @@
bdisp0:bdisp at 9f10000 {
compatible = "st,stih407-bdisp";
reg = <0x9f10000 0x1000>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "bdisp";
clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
};
@@ -324,8 +260,8 @@
compatible = "st,st-hva";
reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
reg-names = "hva_registers", "hva_esram";
- interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
- <GIC_SPI 59 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "clk_hva";
clocks = <&clk_s_c0_flexgen CLK_HVA>;
};
@@ -338,66 +274,7 @@
interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
};
- g1 at 8c80000 {
- compatible = "st,g1";
- reg = <0x8c80000 0x194>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
- };
-
- temp0{
- compatible = "st,stih407-thermal";
- reg = <0x91a0000 0x28>;
- clock-names = "thermal";
- clocks = <&clk_sysin>;
- interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
- };
-
- delta0 {
- compatible = "st,delta";
- clock-names = "delta", "delta-st231", "delta-flash-promip";
- clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
- <&clk_s_c0_flexgen CLK_ST231_DMU>,
- <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
- };
-
- h264pp0: h264pp at 8c00000 {
- compatible = "st,h264pp";
- reg = <0x8c00000 0x20000>;
- interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>;
- clock-names = "clk_h264pp_0";
- clocks = <&clk_s_c0_flexgen CLK_PP_DMU>;
- };
-
- mali: mali at 09f00000 {
- compatible = "arm,mali-400";
- reg = <0x09f00000 0x10000>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_NONE>,
- <GIC_SPI 50 IRQ_TYPE_NONE>,
- <GIC_SPI 41 IRQ_TYPE_NONE>,
- <GIC_SPI 45 IRQ_TYPE_NONE>,
- <GIC_SPI 42 IRQ_TYPE_NONE>,
- <GIC_SPI 46 IRQ_TYPE_NONE>,
- <GIC_SPI 43 IRQ_TYPE_NONE>,
- <GIC_SPI 47 IRQ_TYPE_NONE>,
- <GIC_SPI 44 IRQ_TYPE_NONE>,
- <GIC_SPI 48 IRQ_TYPE_NONE>;
- interrupt-names = "IRQGP",
- "IRQGPMMU",
- "IRQPP0",
- "IRQPPMMU0",
- "IRQPP1",
- "IRQPPMMU1",
- "IRQPP2",
- "IRQPPMMU2",
- "IRQPP3",
- "IRQPPMMU3";
- clock-names = "gpu-clk";
- clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>;
- reset-names = "gpu";
- resets = <&softreset STIH407_GPU_SOFTRESET>;
- };
-
- delta0 {
+ delta0 at 0 {
compatible = "st,st-delta";
clock-names = "delta",
"delta-st231",
@@ -407,51 +284,17 @@
<&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
};
- h264pp0: h264pp at 8c00000 {
- compatible = "st,h264pp";
- reg = <0x8c00000 0x20000>;
- interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>;
- clock-names = "clk_h264pp_0";
- clocks = <&clk_s_c0_flexgen CLK_PP_DMU>;
- };
-
- mali: mali at 09f00000 {
- compatible = "arm,mali-400";
- reg = <0x09f00000 0x10000>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_NONE>,
- <GIC_SPI 50 IRQ_TYPE_NONE>,
- <GIC_SPI 41 IRQ_TYPE_NONE>,
- <GIC_SPI 45 IRQ_TYPE_NONE>,
- <GIC_SPI 42 IRQ_TYPE_NONE>,
- <GIC_SPI 46 IRQ_TYPE_NONE>,
- <GIC_SPI 43 IRQ_TYPE_NONE>,
- <GIC_SPI 47 IRQ_TYPE_NONE>,
- <GIC_SPI 44 IRQ_TYPE_NONE>,
- <GIC_SPI 48 IRQ_TYPE_NONE>;
- interrupt-names = "IRQGP",
- "IRQGPMMU",
- "IRQPP0",
- "IRQPPMMU0",
- "IRQPP1",
- "IRQPPMMU1",
- "IRQPP2",
- "IRQPPMMU2",
- "IRQPP3",
- "IRQPPMMU3";
- clock-names = "gpu-clk";
- clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>;
- reset-names = "gpu";
- resets = <&softreset STIH407_GPU_SOFTRESET>;
- };
-
- hva at 8c85000{
- compatible = "st,st-hva";
- reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
- reg-names = "hva_registers", "hva_esram";
- interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
- <GIC_SPI 59 IRQ_TYPE_NONE>;
- clock-names = "clk_hva";
- clocks = <&clk_s_c0_flexgen CLK_HVA>;
+ sti-cec at 94a087c {
+ compatible = "st,stih-cec";
+ reg = <0x94a087c 0x64>;
+ clocks = <&clk_sysin>;
+ clock-names = "cec-clk";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cec-irq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cec0_default>;
+ resets = <&softreset STIH407_LPM_SOFTRESET>;
+ hdmi-phandle = <&sti_hdmi>;
};
};
};
--
2.17.1
More information about the U-Boot
mailing list