[U-Boot] [PATCH v1] test/py: add MMC/SD block write test

[Jean-Jacques Hiblot]

On 02/07/2019 10:03, Peng Fan wrote:
>> Subject: [PATCH v1] test/py: add MMC/SD block write test
>>
>> Add a standalone MMC block write test. This allows direct testing of MMC
>> access rather than relying on doing so as a side-effect of e.g. DFU or UMS
>> testing, which may not be enabled on all platforms.
>>
>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
>>
>> ---
>> This patch relies on patch "cmd: mem: Add a command to fill the memory
>> with random data".
> I not able to find "cmd: mem: Add a xx" in patchwork/mailbox, has this been applied?
You can get it from patchwork. I don't think  it has been applied yet.

https://patchwork.ozlabs.org/patch/1116086/


> I have taken this current patch into mmc-next.
>
> Regards,
> Peng
>>   test/py/tests/test_mmc_wr.py | 105
>> +++++++++++++++++++++++++++++++++++
>>   1 file changed, 105 insertions(+)
>>   create mode 100644 test/py/tests/test_mmc_wr.py
>>
>> diff --git a/test/py/tests/test_mmc_wr.py b/test/py/tests/test_mmc_wr.py
>> new file mode 100644 index 0000000000..601279a6a4
>> --- /dev/null
>> +++ b/test/py/tests/test_mmc_wr.py
>> @@ -0,0 +1,105 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +# Copyright (c) 2019, Texas Instrument
>> +# Author: Jean-Jacques Hiblot <jjhiblot at ti.com>
>> +
>> +# Test U-Boot's "mmc write" command. The test generates random data,
>> +writes it # to the eMMC or SD card, then reads it back and performs a
>> comparison.
>> +
>> +import pytest
>> +import u_boot_utils
>> +
>> +"""
>> +This test relies on boardenv_* to containing configuration values to
>> +define which MMC devices should be tested. For example:
>> +
>> +env__mmc_wr_configs = (
>> +    {
>> +        "fixture_id": "emmc-boot0",
>> +        "is_emmc": True,
>> +        "devid": 1,
>> +        "partid": 1,
>> +        "sector": 0x10,
>> +        "count": 100,
>> +        "test_iterations": 50,
>> +    },
>> +    {
>> +        "fixture_id": "emmc-boot1",
>> +        "is_emmc": True,
>> +        "devid": 1,
>> +        "partid": 2,
>> +        "sector": 0x10,
>> +        "count": 100,
>> +        "test_iterations": 50,
>> +    },
>> +)
>> +
>> +"""
>> +
>> + at pytest.mark.buildconfigspec('cmd_mmc','cmd_memory')
>> +def test_mmc_wr(u_boot_console, env__mmc_wr_config):
>> +    """Test the "mmc write" command.
>> +
>> +    Args:
>> +        u_boot_console: A U-Boot console connection.
>> +        env__mmc_wr_config: The single MMC configuration on which
>> +            to run the test. See the file-level comment above for details
>> +            of the format.
>> +
>> +    Returns:
>> +        Nothing.
>> +    """
>> +
>> +    is_emmc = env__mmc_wr_config['is_emmc']
>> +    devid = env__mmc_wr_config['devid']
>> +    partid = env__mmc_wr_config.get('partid', 0)
>> +    sector = env__mmc_wr_config.get('sector', 0)
>> +    count_sectors = env__mmc_wr_config.get('count', 1)
>> +    test_iterations = env__mmc_wr_config.get('test_iterations', 1)
>> +
>> +
>> +    count_bytes = count_sectors * 512
>> +    bcfg = u_boot_console.config.buildconfig
>> +    ram_base = u_boot_utils.find_ram_base(u_boot_console)
>> +    src_addr = '0x%08x' % ram_base
>> +    dst_addr = '0x%08x' % (ram_base + count_bytes)
>> +
>> +
>> +    for i in range(test_iterations):
>> +	# Generate random data
>> +	cmd = 'random %s %x' % (src_addr, count_bytes)
>> +	response = u_boot_console.run_command(cmd)
>> +	good_response = '%d bytes filled with random data' % (count_bytes)
>> +	assert good_response in response
>> +
>> +	# Select MMC device
>> +	cmd = 'mmc dev %d' % devid
>> +	if is_emmc:
>> +		cmd += ' %d' % partid
>> +	response = u_boot_console.run_command(cmd)
>> +	assert 'no card present' not in response
>> +	if is_emmc:
>> +		partid_response = "(part %d)" % partid
>> +	else:
>> +		partid_response = ""
>> +	good_response = 'mmc%d%s is current device' % (devid,
>> partid_response)
>> +	assert good_response in response
>> +
>> +	# Write data
>> +	cmd = 'mmc write %s %x %x' % (src_addr, sector, count_sectors)
>> +	response = u_boot_console.run_command(cmd)
>> +	good_response = 'MMC write: dev # %d, block # %d, count %d ... %d
>> blocks written: OK' % (
>> +		devid, sector, count_sectors, count_sectors)
>> +	assert good_response in response
>> +
>> +	# Read data
>> +	cmd = 'mmc read %s %x %x' % (dst_addr, sector, count_sectors)
>> +	response = u_boot_console.run_command(cmd)
>> +	good_response = 'MMC read: dev # %d, block # %d, count %d ... %d
>> blocks read: OK' % (
>> +		devid, sector, count_sectors, count_sectors)
>> +	assert good_response in response
>> +
>> +	# Compare src and dst data
>> +	cmd = 'cmp.b %s %s %x' % (src_addr, dst_addr, count_bytes)
>> +	response = u_boot_console.run_command(cmd)
>> +	good_response = 'Total of %d byte(s) were the same' % (count_bytes)
>> +	assert good_response in response
>> --
>> 2.17.1
>