[U-Boot] zynq_z_turn_defconfig: no info from SPL

[Matwey V. Kornilov]

20.07.2019 20:20, Matwey V. Kornilov пишет:
> Hello,
> 
> I am trying to build u-boot v2019.07 with zynq_z_turn_defconfig config.
> I obtain spl/boot.bin file that is placed at the first FAT partition as
> required by BootROM docs. I also put u-boot.img and u-boot.bin at the
> same partition.
> However, when I powered the board, nothing happening at all.
> 
> I've checked that when I replace boot.bin with a binary provided on the
> vendor CD disk, the BootROM is able to find and run vendor bootloader.
> 
> I even don't see SPL banner when try to rebuild u-boot myself even
> CONFIG_DEBUG_UART is enabled in the config.
> 
> How could I figure out what is happening?

This patch helped me https://patchwork.ozlabs.org/patch/1110114/

But I still see only the following:

���渝���
U-Boot SPL 2019.07-00840-g60df776928 (Jul 27 2019 - 18:07:38 +0300)
mmc boot
Trying to boot from MMC1

> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>