[U-Boot] [PATCH v2 13/31] binman: Add a return value to ProcessContentsUpdate()
Simon Glass
sjg at chromium.org
Mon Jul 8 20:25:35 UTC 2019
At present if this function tries to update the contents such that the
size changes, it raises an error. We plan to add the ability to change
the size of entries after packing is completed, since in some cases it is
not possible to determine the size in advance.
An example of this is with a compressed device tree, where the values
of the device tree change in SetCalculatedProperties() or
ProcessEntryContents(). While the device tree itself does not change size,
since placeholders for any new properties have already bee added by
AddMissingProperties(), we cannot predict the size of the device tree
after compression. If a value changes from 0 to 0x1234 (say), then the
compressed device tree may expand.
As a first step towards supporting this, make ProcessContentsUpdate()
return a value indicating whether the content size is OK. For now this is
always True (since otherwise binman raises an error), but later patches
will adjust this.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
tools/binman/bsection.py | 8 +++++++-
tools/binman/entry.py | 22 +++++++++++++++++++--
tools/binman/etype/_testing.py | 5 +++--
tools/binman/etype/blob_dtb.py | 2 +-
tools/binman/etype/fdtmap.py | 2 +-
tools/binman/etype/fmap.py | 2 +-
tools/binman/etype/image_header.py | 2 +-
tools/binman/etype/section.py | 5 +++--
tools/binman/etype/u_boot_with_ucode_ptr.py | 6 +++---
tools/binman/image.py | 5 ++++-
10 files changed, 44 insertions(+), 15 deletions(-)
diff --git a/tools/binman/bsection.py b/tools/binman/bsection.py
index 3e3d369d5e4..f49a6e93bc7 100644
--- a/tools/binman/bsection.py
+++ b/tools/binman/bsection.py
@@ -317,9 +317,15 @@ class Section(object):
"""Call the ProcessContents() method for each entry
This is intended to adjust the contents as needed by the entry type.
+
+ Returns:
+ True if no entries needed to change their size
"""
+ sizes_ok = True
for entry in self._entries.values():
- entry.ProcessContents()
+ if not entry.ProcessContents():
+ sizes_ok = False
+ return sizes_ok
def WriteSymbols(self):
"""Write symbol values into binary files for access at run time"""
diff --git a/tools/binman/entry.py b/tools/binman/entry.py
index b19a3b026f2..7db1402b84f 100644
--- a/tools/binman/entry.py
+++ b/tools/binman/entry.py
@@ -245,7 +245,8 @@ class Entry(object):
def ProcessContentsUpdate(self, data):
"""Update the contents of an entry, after the size is fixed
- This checks that the new data is the same size as the old.
+ This checks that the new data is the same size as the old. If the size
+ has changed, this triggers a re-run of the packing algorithm.
Args:
data: Data to set to the contents (bytes)
@@ -253,10 +254,12 @@ class Entry(object):
Raises:
ValueError if the new data size is not the same as the old
"""
+ size_ok = True
if len(data) != self.contents_size:
self.Raise('Cannot update entry size from %d to %d' %
(self.contents_size, len(data)))
self.SetContents(data)
+ return size_ok
def ObtainContents(self):
"""Figure out the contents of an entry.
@@ -401,7 +404,22 @@ class Entry(object):
self.image_pos = image_pos + self.offset
def ProcessContents(self):
- pass
+ """Do any post-packing updates of entry contents
+
+ This function should call ProcessContentsUpdate() to update the entry
+ contents, if necessary, returning its return value here.
+
+ Args:
+ data: Data to set to the contents (bytes)
+
+ Returns:
+ True if the new data size is OK, False if expansion is needed
+
+ Raises:
+ ValueError if the new data size is not the same as the old and
+ state.AllowEntryExpansion() is False
+ """
+ return True
def WriteSymbols(self, section):
"""Write symbol values into binary files for access at run time
diff --git a/tools/binman/etype/_testing.py b/tools/binman/etype/_testing.py
index ac62d2e2005..2204362281c 100644
--- a/tools/binman/etype/_testing.py
+++ b/tools/binman/etype/_testing.py
@@ -88,9 +88,10 @@ class Entry__testing(Entry):
def ProcessContents(self):
if self.bad_update_contents:
- # Request to update the conents with something larger, to cause a
+ # Request to update the contents with something larger, to cause a
# failure.
- self.ProcessContentsUpdate('aa')
+ return self.ProcessContentsUpdate('aa')
+ return True
def ProcessFdt(self, fdt):
"""Force reprocessing the first time"""
diff --git a/tools/binman/etype/blob_dtb.py b/tools/binman/etype/blob_dtb.py
index d80c3d7e006..09d5d727138 100644
--- a/tools/binman/etype/blob_dtb.py
+++ b/tools/binman/etype/blob_dtb.py
@@ -30,4 +30,4 @@ class Entry_blob_dtb(Entry_blob):
def ProcessContents(self):
"""Re-read the DTB contents so that we get any calculated properties"""
_, data = state.GetFdtContents(self._filename)
- self.ProcessContentsUpdate(data)
+ return self.ProcessContentsUpdate(data)
diff --git a/tools/binman/etype/fdtmap.py b/tools/binman/etype/fdtmap.py
index ddac148b9ba..bfd7962be3a 100644
--- a/tools/binman/etype/fdtmap.py
+++ b/tools/binman/etype/fdtmap.py
@@ -106,4 +106,4 @@ class Entry_fdtmap(Entry):
This is necessary since new data may have been written back to it during
processing, e.g. the image-pos properties.
"""
- self.ProcessContentsUpdate(self._GetFdtmap())
+ return self.ProcessContentsUpdate(self._GetFdtmap())
diff --git a/tools/binman/etype/fmap.py b/tools/binman/etype/fmap.py
index 45d6db18a31..3a809486098 100644
--- a/tools/binman/etype/fmap.py
+++ b/tools/binman/etype/fmap.py
@@ -62,4 +62,4 @@ class Entry_fmap(Entry):
return True
def ProcessContents(self):
- self.ProcessContentsUpdate(self._GetFmap())
+ return self.ProcessContentsUpdate(self._GetFmap())
diff --git a/tools/binman/etype/image_header.py b/tools/binman/etype/image_header.py
index d6de58ce4b7..b1c4f8a07e9 100644
--- a/tools/binman/etype/image_header.py
+++ b/tools/binman/etype/image_header.py
@@ -73,4 +73,4 @@ class Entry_image_header(Entry):
This is necessary since image_pos is not available when ObtainContents()
is called, since by then the entries have not been packed in the image.
"""
- self.ProcessContentsUpdate(self._GetHeader())
+ return self.ProcessContentsUpdate(self._GetHeader())
diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py
index 3681a484689..51eddcd995a 100644
--- a/tools/binman/etype/section.py
+++ b/tools/binman/etype/section.py
@@ -85,8 +85,9 @@ class Entry_section(Entry):
self._section.SetCalculatedProperties()
def ProcessContents(self):
- self._section.ProcessEntryContents()
- super(Entry_section, self).ProcessContents()
+ sizes_ok = self._section.ProcessEntryContents()
+ sizes_ok_base = super(Entry_section, self).ProcessContents()
+ return sizes_ok and sizes_ok_base
def CheckOffset(self):
self._section.CheckEntries()
diff --git a/tools/binman/etype/u_boot_with_ucode_ptr.py b/tools/binman/etype/u_boot_with_ucode_ptr.py
index da0e12417b5..4104bf8bf13 100644
--- a/tools/binman/etype/u_boot_with_ucode_ptr.py
+++ b/tools/binman/etype/u_boot_with_ucode_ptr.py
@@ -91,6 +91,6 @@ class Entry_u_boot_with_ucode_ptr(Entry_blob):
# Write the microcode offset and size into the entry
offset_and_size = struct.pack('<2L', offset, size)
self.target_offset -= self.image_pos
- self.ProcessContentsUpdate(self.data[:self.target_offset] +
- offset_and_size +
- self.data[self.target_offset + 8:])
+ return self.ProcessContentsUpdate(self.data[:self.target_offset] +
+ offset_and_size +
+ self.data[self.target_offset + 8:])
diff --git a/tools/binman/image.py b/tools/binman/image.py
index f237ae302df..c8bce394aa1 100644
--- a/tools/binman/image.py
+++ b/tools/binman/image.py
@@ -122,8 +122,11 @@ class Image:
"""Call the ProcessContents() method for each entry
This is intended to adjust the contents as needed by the entry type.
+
+ Returns:
+ True if the new data size is OK, False if expansion is needed
"""
- self._section.ProcessEntryContents()
+ return self._section.ProcessEntryContents()
def WriteSymbols(self):
"""Write symbol values into binary files for access at run time"""
--
2.22.0.410.gd8fdbe21b5-goog
More information about the U-Boot
mailing list