[U-Boot] [PATCH v5 0/4] SiFive SPI MMC Support

[Anup Patel]

On Wed, Jul 17, 2019 at 9:38 AM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> On Wed, Jul 17, 2019 at 9:20 AM Anup Patel <Anup.Patel at wdc.com> wrote:
> >
> > This patchset adds:
> > 1. SiFive SPI driver
> > 2. New MMC SPI driver based on DM_MMC and DM_SPI
> > 3. Enables SiFive SPI driver and MMC SPI driver for SiFive Unleashed board
> >
> > With this patch series, we can now load files from SD card on SiFive
> > Unleashed board. Many thanks to Bhargav for porting SiFive SPI driver
> > and updating MMC SPI driver for us.
> >
> > These patches can be also found in riscv_unleashed_mmc_spi_v5 branch of:
> > https//github.com/avpatel/u-boot.git
> >
> > Changes since v4:
> > - Renamed kconfig option from SIFIVE_SPI to SPI_SIFIVE for consistency
> > - Added dummy claim_bus() and release_bus() callbacks
> >
> > Changes since v3:
> > - Removed PATCH2, PATCH3, and PATCH4 because these are already merged
> > - Added separate patch to use SPI_XFER_xyz flags in MMC_SPI driver
> > - Use readl/writel directly instead of sifive_spi_read/sifi_spi_write
> > - Use SPI_XFER_xyz flags to enable/disable chipselect
> > - Remove unused callback sifive_spi_cs_info()
> >
> > Changes since v2:
> > - Minor fixes in PATCH1 which adds SiFive SPI driver
> > - Removed CONFIG_MMC_SPI_xyz from scripts/config_whitelist.txt
> > - Removed cmd/mmc_spi and all its refrences as separate patch
> > - Removed DM_SPI and DM_MMC from SiFive FU540 Kconfig
> >
> > Changes since v1:
> > - Make response matching part belongs to mmc_spi_sendcmd()
> > - Match response to zero for SEND_STATUS (CMD13)
> > - Add separate patch for updating SiFive FU540 Documentation
> >
> > Anup Patel (2):
> >   mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
> >   doc: sifive-fu540: Update README for SiFive SPI and MMC SPI drivers
> >
> > Bhargav Shah (2):
> >   spi: Add SiFive SPI driver
> >   riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
> >
> >  board/sifive/fu540/Kconfig |   6 +
> >  doc/README.sifive-fu540    |   4 +-
> >  drivers/mmc/mmc_spi.c      |   4 +-
> >  drivers/spi/Kconfig        |   8 +
> >  drivers/spi/Makefile       |   1 +
> >  drivers/spi/spi-sifive.c   | 375 +++++++++++++++++++++++++++++++++++++
> >  6 files changed, 394 insertions(+), 4 deletions(-)
> >  create mode 100644 drivers/spi/spi-sifive.c
>
> I would like to pick entire series on spi tree, but it has some boards
> changes so I would like to ask the board maintainers to give a
> permissions to do so, if not possible I can take only spi changes.

Last 2 patches depend on below mentioned series so won't apply
for you. I guess you can pickup SPI driver and MMC_SPI change.

Refer, https://www.mail-archive.com/u-boot@lists.denx.de/msg331405.html

Regards,
Anup