[U-Boot] [PATCH v2 1/3] rockchip: rk3399: derive ethaddr from cpuid
Kever Yang
kever.yang at rock-chips.com
Mon Jul 15 13:15:00 UTC 2019
Hi Rohan,
On 2019/7/12 下午10:22, Rohan Garg wrote:
> Generate a MAC address based on the cpuid available in the efuse
> block: Use the first 6 byte of the cpuid's SHA256 hash and set the
> locally administered bits. Also ensure that the multicast bit is
> cleared.
>
> The MAC address is only generated and set if there is no ethaddr
> present in the saved environment.
>
> This is based off of Klaus Goger's work in 8adc9d
>
> Signed-off-by: Rohan Garg <rohan.garg at collabora.com>
>
> ---
>
> arch/arm/include/asm/arch-rockchip/misc.h | 13 +++
> arch/arm/mach-rockchip/Makefile | 2 +
> arch/arm/mach-rockchip/misc.c | 108 ++++++++++++++++++++++
> board/rockchip/evb_rk3399/evb-rk3399.c | 13 +++
> 4 files changed, 136 insertions(+)
> create mode 100644 arch/arm/include/asm/arch-rockchip/misc.h
> create mode 100644 arch/arm/mach-rockchip/misc.c
>
> diff --git a/arch/arm/include/asm/arch-rockchip/misc.h b/arch/arm/include/asm/arch-rockchip/misc.h
> new file mode 100644
> index 0000000000..11ca4eb033
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-rockchip/misc.h
> @@ -0,0 +1,13 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * RK3399: Architecture common definitions
> + *
> + * Copyright (C) 2019 Collabora Inc - https://www.collabora.com/
> + * Rohan Garg <rohan.garg at collabora.com>
> + */
> +
> +void rockchip_cpuid_from_efuse(const u32 cpuid_offset,
> + const u32 cpuid_length,
> + u8 *cpuid);
> +void rockchip_cpuid_set(const u8 *cpuid, const u32 cpuid_length);
> +void rockchip_setup_macaddr(void);
> diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
> index 23760a959a..43d895564f 100644
> --- a/arch/arm/mach-rockchip/Makefile
> +++ b/arch/arm/mach-rockchip/Makefile
> @@ -47,6 +47,8 @@ obj-y += rk_timer.o
> endif
> endif
>
> +obj-y += misc.o
This should be depends on CONFIG_MISC_INIT_R.
> +
> obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
> obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/
> ifndef CONFIG_TPL_BUILD
> diff --git a/arch/arm/mach-rockchip/misc.c b/arch/arm/mach-rockchip/misc.c
> new file mode 100644
> index 0000000000..3e6110cc8b
> --- /dev/null
> +++ b/arch/arm/mach-rockchip/misc.c
> @@ -0,0 +1,108 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * RK3399: Architecture common definitions
> + *
> + * Copyright (C) 2019 Collabora Inc - https://www.collabora.com/
> + * Rohan Garg <rohan.garg at collabora.com>
> + *
> + * Based on puma-rk3399.c:
> + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
> + */
> +
> +#include <common.h>
> +#include <u-boot/sha256.h>
> +#include <dm/uclass-internal.h>
> +#include <environment.h>
> +
> +#include <asm/arch-rockchip/misc.h>
> +
> +void rockchip_setup_macaddr(void)
> +{
> +#if CONFIG_IS_ENABLED(CMD_NET)
> + int ret;
> + const char *cpuid = env_get("cpuid#");
> + u8 hash[SHA256_SUM_LEN];
> + int size = sizeof(hash);
> + u8 mac_addr[6];
> +
> + /* Only generate a MAC address, if none is set in the environment */
> + if (env_get("ethaddr"))
> + return;
> +
> + if (!cpuid) {
> + debug("%s: could not retrieve 'cpuid#'\n", __func__);
> + return;
> + }
> +
> + ret = hash_block("sha256", (void *)cpuid, strlen(cpuid), hash, &size);
> + if (ret) {
> + debug("%s: failed to calculate SHA256\n", __func__);
> + return;
> + }
> +
> + /* Copy 6 bytes of the hash to base the MAC address on */
> + memcpy(mac_addr, hash, 6);
> +
> + /* Make this a valid MAC address and set it */
> + mac_addr[0] &= 0xfe; /* clear multicast bit */
> + mac_addr[0] |= 0x02; /* set local assignment bit (IEEE802) */
> + eth_env_set_enetaddr("ethaddr", mac_addr);
> +#endif
> +}
> +
> +void rockchip_cpuid_from_efuse(const u32 cpuid_offset,
> + const u32 cpuid_length,
> + u8 *cpuid)
> +{
> +#if CONFIG_IS_ENABLED(ROCKCHIP_EFUSE)
> + struct udevice *dev;
> + int ret;
> +
> + /* retrieve the device */
> + ret = uclass_get_device_by_driver(UCLASS_MISC,
> + DM_GET_DRIVER(rockchip_efuse), &dev);
> + if (ret) {
> + debug("%s: could not find efuse device\n", __func__);
> + return;
> + }
> +
> + /* read the cpu_id range from the efuses */
> + ret = misc_read(dev, cpuid_offset, cpuid, sizeof(cpuid));
> + if (ret) {
> + debug("%s: reading cpuid from the efuses failed\n",
> + __func__);
> + return;
> + }
> +#endif
> +}
> +
> +void rockchip_cpuid_set(const u8 *cpuid, const u32 cpuid_length)
> +{
> + u8 low[cpuid_length/2], high[cpuid_length/2];
> + char cpuid_str[cpuid_length * 2 + 1];
> + u64 serialno;
> + char serialno_str[17];
> + int i;
> +
> + memset(cpuid_str, 0, sizeof(cpuid_str));
> + for (i = 0; i < 16; i++)
> + sprintf(&cpuid_str[i * 2], "%02x", cpuid[i]);
> +
> + debug("cpuid: %s\n", cpuid_str);
> +
> + /*
> + * Mix the cpuid bytes using the same rules as in
> + * ${linux}/drivers/soc/rockchip/rockchip-cpuinfo.c
> + */
> + for (i = 0; i < 8; i++) {
> + low[i] = cpuid[1 + (i << 1)];
> + high[i] = cpuid[i << 1];
> + }
> +
> + serialno = crc32_no_comp(0, low, 8);
> + serialno |= (u64)crc32_no_comp(serialno, high, 8) << 32;
> + snprintf(serialno_str, sizeof(serialno_str), "%016llx", serialno);
> +
> + env_set("cpuid#", cpuid_str);
> + env_set("serial#", serialno_str);
> +}
> diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c b/board/rockchip/evb_rk3399/evb-rk3399.c
> index eb1b832274..9253866c02 100644
> --- a/board/rockchip/evb_rk3399/evb-rk3399.c
> +++ b/board/rockchip/evb_rk3399/evb-rk3399.c
> @@ -7,6 +7,7 @@
> #include <dm.h>
> #include <dm/pinctrl.h>
> #include <asm/arch-rockchip/periph.h>
> +#include <asm/arch-rockchip/misc.h>
> #include <power/regulator.h>
>
> int board_init(void)
> @@ -33,3 +34,15 @@ int board_init(void)
> out:
> return 0;
> }
> +
> +int misc_init_r(void)
> +{
It's great to make these code as common code so that other SoCs
can share it, is it possible to also make this function common?
Not every SoC have efuse driver, so for those SoCs, we need a random
serial No.
> + const u32 cpuid_offset = 0x7;
> + const u32 cpuid_length = 0x10;
> + u8 cpuid[cpuid_length];
> +
> + rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
> + rockchip_cpuid_set(cpuid, cpuid_length);
> + rockchip_setup_macaddr();
It will be better for these function calls with return value.
There should be a blank line before 'return';
Thanks,
- Kever
> + return 0;
> +}
More information about the U-Boot
mailing list