[U-Boot] [PATCH 13/24] rockchip: rk3288: move SOC setting into arch_cpu_init()

Kever Yang kever.yang at rock-chips.com
Mon Jul 22 12:02:10 UTC 2019


Qos setting and emmc relate SoC setting should go to arch_cpu_init().

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---

 arch/arm/mach-rockchip/rk3288-board.c  | 30 --------------------------
 arch/arm/mach-rockchip/rk3288/rk3288.c | 30 ++++++++++++++++++++++++++
 2 files changed, 30 insertions(+), 30 deletions(-)

diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c
index 23c5343eb8..9d88365fff 100644
--- a/arch/arm/mach-rockchip/rk3288-board.c
+++ b/arch/arm/mach-rockchip/rk3288-board.c
@@ -13,7 +13,6 @@
 #include <asm/arch-rockchip/cru_rk3288.h>
 #include <asm/arch-rockchip/periph.h>
 #include <asm/arch-rockchip/pmu_rk3288.h>
-#include <asm/arch-rockchip/qos_rk3288.h>
 #include <asm/arch-rockchip/boot_mode.h>
 #include <asm/gpio.h>
 #include <dt-bindings/clock/rk3288-cru.h>
@@ -26,24 +25,6 @@ __weak int rk_board_late_init(void)
 	return 0;
 }
 
-int rk3288_qos_init(void)
-{
-	int val = 2 << PRIORITY_HIGH_SHIFT | 2 << PRIORITY_LOW_SHIFT;
-	/* set vop qos to higher priority */
-	writel(val, CPU_AXI_QOS_PRIORITY + VIO0_VOP_QOS);
-	writel(val, CPU_AXI_QOS_PRIORITY + VIO1_VOP_QOS);
-
-	if (!fdt_node_check_compatible(gd->fdt_blob, 0,
-				       "rockchip,rk3288-tinker"))
-	{
-		/* set isp qos to higher priority */
-		writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_R_QOS);
-		writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W0_QOS);
-		writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W1_QOS);
-	}
-	return 0;
-}
-
 static void rk3288_detect_reset_reason(void)
 {
 	struct rk3288_cru *cru = rockchip_get_cru();
@@ -84,7 +65,6 @@ static void rk3288_detect_reset_reason(void)
 int board_late_init(void)
 {
 	setup_boot_mode();
-	rk3288_qos_init();
 	rk3288_detect_reset_reason();
 
 	return rk_board_late_init();
@@ -266,8 +246,6 @@ U_BOOT_CMD(
 
 int board_early_init_f(void)
 {
-	const uintptr_t GRF_SOC_CON0 = 0xff770244;
-	const uintptr_t GRF_SOC_CON2 = 0xff77024c;
 	struct udevice *dev;
 	int ret;
 
@@ -282,13 +260,5 @@ int board_early_init_f(void)
 		return ret;
 	}
 
-	rk_setreg(GRF_SOC_CON2, 1 << 0);
-
-	/*
-	 * Disable JTAG on sdmmc0 IO. The SDMMC won't work until this bit is
-	 * cleared
-	 */
-	rk_clrreg(GRF_SOC_CON0, 1 << 12);
-
 	return 0;
 }
diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c b/arch/arm/mach-rockchip/rk3288/rk3288.c
index de9e396288..d938d4bff8 100644
--- a/arch/arm/mach-rockchip/rk3288/rk3288.c
+++ b/arch/arm/mach-rockchip/rk3288/rk3288.c
@@ -2,11 +2,15 @@
 /*
  * Copyright (c) 2016 Rockchip Electronics Co., Ltd
  */
+#include <common.h>
 #include <asm/armv7.h>
 #include <asm/io.h>
 #include <asm/arch-rockchip/bootrom.h>
 #include <asm/arch-rockchip/hardware.h>
 #include <asm/arch-rockchip/grf_rk3288.h>
+#include <asm/arch-rockchip/qos_rk3288.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 
 #define GRF_BASE	0xff770000
 
@@ -36,6 +40,24 @@ static void configure_l2ctlr(void)
 }
 #endif
 
+int rk3288_qos_init(void)
+{
+	int val = 2 << PRIORITY_HIGH_SHIFT | 2 << PRIORITY_LOW_SHIFT;
+	/* set vop qos to higher priority */
+	writel(val, CPU_AXI_QOS_PRIORITY + VIO0_VOP_QOS);
+	writel(val, CPU_AXI_QOS_PRIORITY + VIO1_VOP_QOS);
+
+	if (!fdt_node_check_compatible(gd->fdt_blob, 0,
+				       "rockchip,rk3288-tinker")) {
+		/* set isp qos to higher priority */
+		writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_R_QOS);
+		writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W0_QOS);
+		writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W1_QOS);
+	}
+
+	return 0;
+}
+
 int arch_cpu_init(void)
 {
 #ifdef CONFIG_SPL_BUILD
@@ -46,6 +68,14 @@ int arch_cpu_init(void)
 
 	/* Use rkpwm by default */
 	rk_setreg(&grf->soc_con2, 1 << 0);
+
+	/*
+	 * Disable JTAG on sdmmc0 IO. The SDMMC won't work until this bit is
+	 * cleared
+	 */
+	rk_clrreg(&grf->soc_con0, 1 << 12);
+
+	rk3288_qos_init();
 #endif
 
 	return 0;
-- 
2.17.1



More information about the U-Boot mailing list