[U-Boot] [PATCH 14/24] rockchip: rk3288: move board_early_init_f() back to veyron

[Kever Yang]

The board_early_init_f() is only used by veyron board now,
move it into the board file veyron.c

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---

 arch/arm/mach-rockchip/rk3288-board.c | 19 -------------------
 board/google/veyron/veyron.c          | 20 ++++++++++++++++++++
 2 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c
index 9d88365fff..e629df3abb 100644
--- a/arch/arm/mach-rockchip/rk3288-board.c
+++ b/arch/arm/mach-rockchip/rk3288-board.c
@@ -243,22 +243,3 @@ U_BOOT_CMD(
 	"display information about clocks",
 	""
 );
-
-int board_early_init_f(void)
-{
-	struct udevice *dev;
-	int ret;
-
-	/*
-	 * This init is done in SPL, but when chain-loading U-Boot SPL will
-	 * have been skipped. Allow the clock driver to check if it needs
-	 * setting up.
-	 */
-	ret = rockchip_get_clk(&dev);
-	if (ret) {
-		debug("CLK init failed: %d\n", ret);
-		return ret;
-	}
-
-	return 0;
-}
diff --git a/board/google/veyron/veyron.c b/board/google/veyron/veyron.c
index 19edb18a66..361f0e9da2 100644
--- a/board/google/veyron/veyron.c
+++ b/board/google/veyron/veyron.c
@@ -4,9 +4,29 @@
  */
 
 #include <common.h>
+#include <asm/arch-rockchip/clock.h>
 
 /*
  * We should increase the DDR voltage to 1.2V using the PWM regulator.
  * There is a U-Boot driver for this but it may need to add support for the
  * 'voltage-table' property.
  */
+
+int board_early_init_f(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	/*
+	 * This init is done in SPL, but when chain-loading U-Boot SPL will
+	 * have been skipped. Allow the clock driver to check if it needs
+	 * setting up.
+	 */
+	ret = rockchip_get_clk(&dev);
+	if (ret) {
+		debug("CLK init failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
-- 
2.17.1