[U-Boot] [PATCH v3 4/5] armv8: dts: fsl-ls2088a: add i2c node support

Chuanhua Han chuanhua.han at nxp.com
Mon Jul 22 08:36:45 UTC 2019


From: chuanhua han <chuanhua.han at nxp.com>

One ls2088a, there is four I2C controllers.
This patch is to add I2C node for ls2088a.

Signed-off-by: Chuanhua Han <chuanhua.han at nxp.com>
---
depends on: 
    - http://patchwork.ozlabs.org/project/uboot/list/?series=109459
    - http://patchwork.ozlabs.org/project/uboot/list/?series=113103

Change in v3:
	- No change.
Change in v2:
	- No change.

 arch/arm/dts/fsl-ls2080a.dtsi |   36 ++++++++++++++++++++++++++++++++++++
 1 files changed, 36 insertions(+), 0 deletions(-)

diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index 5c0769b..99ed33a 100644
--- a/arch/arm/dts/fsl-ls2080a.dtsi
+++ b/arch/arm/dts/fsl-ls2080a.dtsi
@@ -56,6 +56,42 @@
 		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
 	};
 
+	i2c0: i2c at 2000000 {
+		status = "disabled";
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2000000 0x0 0x10000>;
+		interrupts = <0 34 0x4>; /* Level high type */
+	};
+
+	i2c1: i2c at 2010000 {
+		status = "disabled";
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2010000 0x0 0x10000>;
+		interrupts = <0 34 0x4>; /* Level high type */
+	};
+
+	i2c2: i2c at 2020000 {
+		status = "disabled";
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2020000 0x0 0x10000>;
+		interrupts = <0 35 0x4>; /* Level high type */
+	};
+
+	i2c3: i2c at 2030000 {
+		status = "disabled";
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2030000 0x0 0x10000>;
+		interrupts = <0 35 0x4>; /* Level high type */
+	};
+
 	dspi: dspi at 2100000 {
 		compatible = "fsl,vf610-dspi";
 		#address-cells = <1>;
-- 
1.7.1



More information about the U-Boot mailing list