[U-Boot] [PATCH v3 34/57] ram: sdram: Configure lpddr4 tsel rd, wr based on IO settings

[Kever Yang]

On 2019/7/16 下午7:57, Jagan Teki wrote:
> Now we have IO settings available for all supported sdram
> frequencies, so retrieve these IO settings and make used
> for LPDDR4 ds odt configuration.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> Signed-off-by: YouMin Chen <cym at rock-chips.com>

Reviewed-by: Kever Yang <Kever.yang at rock-chips.com>

Thanks,
  - Kever
> ---
>   drivers/ram/rockchip/sdram_rk3399.c | 42 ++++++++++++++++++++++++-----
>   1 file changed, 36 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
> index 95d9f3a88b..1b8ce5160f 100644
> --- a/drivers/ram/rockchip/sdram_rk3399.c
> +++ b/drivers/ram/rockchip/sdram_rk3399.c
> @@ -184,6 +184,33 @@ struct io_setting {
>   	},
>   };
>   
> +/**
> + * phy = 0, PHY boot freq
> + * phy = 1, PHY index 0
> + * phy = 2, PHY index 1
> + */
> +static struct io_setting *
> +lpddr4_get_io_settings(const struct rk3399_sdram_params *params, u32 mr5)
> +{
> +	struct io_setting *io = NULL;
> +	u32 n;
> +
> +	for (n = 0; n < ARRAY_SIZE(lpddr4_io_setting); n++) {
> +		io = &lpddr4_io_setting[n];
> +
> +		if (io->mr5 != 0) {
> +			if (io->mhz >= params->base.ddr_freq &&
> +			    io->mr5 == mr5)
> +				break;
> +		} else {
> +			if (io->mhz >= params->base.ddr_freq)
> +				break;
> +		}
> +	}
> +
> +	return io;
> +}
> +
>   static void *get_ddrc0_con(struct dram_info *dram, u8 channel)
>   {
>   	return (channel == 0) ? &dram->grf->ddrc0_con0 : &dram->grf->ddrc0_con1;
> @@ -524,7 +551,7 @@ static int phy_io_config(const struct chan_info *chan,
>   }
>   
>   static void set_ds_odt(const struct chan_info *chan,
> -		       const struct rk3399_sdram_params *params)
> +		       const struct rk3399_sdram_params *params, u32 mr5)
>   {
>   	u32 *denali_phy = chan->publ->denali_phy;
>   
> @@ -533,19 +560,22 @@ static void set_ds_odt(const struct chan_info *chan,
>   	u32 tsel_idle_select_n, tsel_rd_select_n;
>   	u32 tsel_wr_select_dq_p, tsel_wr_select_ca_p;
>   	u32 tsel_wr_select_dq_n, tsel_wr_select_ca_n;
> +	struct io_setting *io = NULL;
>   	u32 reg_value;
>   
>   	if (params->base.dramtype == LPDDR4) {
> +		io = lpddr4_get_io_settings(params, mr5);
> +
>   		tsel_rd_select_p = PHY_DRV_ODT_HI_Z;
> -		tsel_rd_select_n = PHY_DRV_ODT_240;
> +		tsel_rd_select_n = io->rd_odt;
>   
>   		tsel_idle_select_p = PHY_DRV_ODT_HI_Z;
>   		tsel_idle_select_n = PHY_DRV_ODT_240;
>   
> -		tsel_wr_select_dq_p = PHY_DRV_ODT_40;
> +		tsel_wr_select_dq_p = io->wr_dq_drv;
>   		tsel_wr_select_dq_n = PHY_DRV_ODT_40;
>   
> -		tsel_wr_select_ca_p = PHY_DRV_ODT_40;
> +		tsel_wr_select_ca_p = io->wr_ca_drv;
>   		tsel_wr_select_ca_n = PHY_DRV_ODT_40;
>   	} else if (params->base.dramtype == LPDDR3) {
>   		tsel_rd_select_p = PHY_DRV_ODT_240;
> @@ -723,7 +753,7 @@ static void pctl_start(struct dram_info *dram, u8 channel)
>   }
>   
>   static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan,
> -		    u32 channel, const struct rk3399_sdram_params *params)
> +		    u32 channel, struct rk3399_sdram_params *params)
>   {
>   	u32 *denali_ctl = chan->pctl->denali_ctl;
>   	u32 *denali_pi = chan->pi->denali_pi;
> @@ -805,7 +835,7 @@ static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan,
>   	copy_to_reg(&denali_phy[512], &params_phy[512], (549 - 512 + 1) * 4);
>   	copy_to_reg(&denali_phy[640], &params_phy[640], (677 - 640 + 1) * 4);
>   	copy_to_reg(&denali_phy[768], &params_phy[768], (805 - 768 + 1) * 4);
> -	set_ds_odt(chan, params);
> +	set_ds_odt(chan, params, 0);
>   
>   	/*
>   	 * phy_dqs_tsel_wr_timing_X 8bits DENALI_PHY_84/212/340/468 offset_8