[U-Boot] [PATCH 3/6] net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071

[Anatolij Gustschin]

On mv88E6071 the 'EDet' field offset, width and sense control
bits are different, adjust the driver to init the PHY control
register as needed. This fixes not working link detection and
tftp transfers.

Signed-off-by: Anatolij Gustschin <agust at denx.de>
---
 drivers/net/phy/mv88e61xx.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
index 79137f6080..6d10292f11 100644
--- a/drivers/net/phy/mv88e61xx.c
+++ b/drivers/net/phy/mv88e61xx.c
@@ -119,16 +119,12 @@
 
 #define SERDES_REG_CTRL_1_FORCE_LINK	BIT(10)
 
-#define PHY_REG_CTRL1_ENERGY_DET_SHIFT	8
-#define PHY_REG_CTRL1_ENERGY_DET_WIDTH	2
-
 /* Field values */
 #define PORT_REG_CTRL_PSTATE_DISABLED	0
 #define PORT_REG_CTRL_PSTATE_FORWARD	3
 
 #define PHY_REG_CTRL1_ENERGY_DET_OFF	0
 #define PHY_REG_CTRL1_ENERGY_DET_SENSE_ONLY	2
-#define PHY_REG_CTRL1_ENERGY_DET_SENSE_XMIT	3
 
 /* PHY Status Register */
 #define PHY_REG_STATUS1_SPEED		0xc000
@@ -194,6 +190,9 @@ struct mv88e61xx_phy_priv {
 	u16 port_stat_link_mask;
 	u16 port_stat_dup_mask;
 	u8 port_stat_speed_width;
+	u8 phy_ctrl1_en_det_shift;
+	u8 phy_ctrl1_en_det_width;
+	u8 phy_ctrl1_en_det_sense_xmit;
 	u8 global1;
 	u8 global2;
 };
@@ -841,6 +840,7 @@ static int mv88e61xx_phy_enable(struct phy_device *phydev, u8 phy)
 
 static int mv88e61xx_phy_setup(struct phy_device *phydev, u8 phy)
 {
+	struct mv88e61xx_phy_priv *priv = phydev->priv;
 	int val;
 
 	/*
@@ -850,9 +850,9 @@ static int mv88e61xx_phy_setup(struct phy_device *phydev, u8 phy)
 	val = mv88e61xx_phy_read(phydev, phy, PHY_REG_CTRL1);
 	if (val < 0)
 		return val;
-	val = bitfield_replace(val, PHY_REG_CTRL1_ENERGY_DET_SHIFT,
-			       PHY_REG_CTRL1_ENERGY_DET_WIDTH,
-			       PHY_REG_CTRL1_ENERGY_DET_SENSE_XMIT);
+	val = bitfield_replace(val, priv->phy_ctrl1_en_det_shift,
+			       priv->phy_ctrl1_en_det_width,
+			       priv->phy_ctrl1_en_det_sense_xmit);
 	val = mv88e61xx_phy_write(phydev, phy, PHY_REG_CTRL1, val);
 	if (val < 0)
 		return val;
@@ -962,12 +962,18 @@ static int mv88e61xx_probe(struct phy_device *phydev)
 		priv->port_stat_link_mask = BIT(11);
 		priv->port_stat_dup_mask = BIT(10);
 		priv->port_stat_speed_width = 2;
+		priv->phy_ctrl1_en_det_shift = 8;
+		priv->phy_ctrl1_en_det_width = 2;
+		priv->phy_ctrl1_en_det_sense_xmit = 3;
 		break;
 	case PORT_SWITCH_ID_6071:
 		priv->port_count = 7;
 		priv->port_stat_link_mask = BIT(12);
 		priv->port_stat_dup_mask = BIT(9);
 		priv->port_stat_speed_width = 1;
+		priv->phy_ctrl1_en_det_shift = 14;
+		priv->phy_ctrl1_en_det_width = 1;
+		priv->phy_ctrl1_en_det_sense_xmit = 1;
 		break;
 	default:
 		free(priv);
-- 
2.17.1