[U-Boot] [PATCH 08/15] wdt: dw: Add driver-model support
Jagan Teki
jagan at amarulasolutions.com
Mon Jul 29 07:47:04 UTC 2019
Add driver-model code for designware watchdog.
Cc: Chin Liang See <clsee at altera.com>
Cc: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
drivers/watchdog/designware_wdt.c | 114 +++++++++++++++++++++++++++++-
1 file changed, 113 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/designware_wdt.c b/drivers/watchdog/designware_wdt.c
index 2979fda44e..4efbb25f86 100644
--- a/drivers/watchdog/designware_wdt.c
+++ b/drivers/watchdog/designware_wdt.c
@@ -4,7 +4,6 @@
*/
#include <common.h>
-#include <watchdog.h>
#include <asm/io.h>
#include <asm/utils.h>
@@ -16,6 +15,117 @@
#define DW_WDT_CR_RMOD_OFFSET 0x01
#define DW_WDT_CRR_RESTART_VAL 0x76
+#ifdef CONFIG_WDT
+
+#include <dm.h>
+#include <wdt.h>
+#include <clk.h>
+
+struct dw_wdt {
+ void __iomem *regs;
+ unsigned long clk_rate;
+};
+
+static inline int dw_wdt_is_enabled(struct dw_wdt *dw)
+{
+ return readl(dw->regs + DW_WDT_CR) & DW_WDT_CR_RMOD_OFFSET;
+}
+
+/*
+ * Set the watchdog time interval.
+ * Counter is 32 bit.
+ */
+static int dw_wdt_set_timeout(struct dw_wdt *dw, unsigned int timeout)
+{
+ signed int i;
+
+ /* calculate the timeout range value */
+ i = (log_2_n_round_up(timeout * dw->clk_rate)) - 16;
+ if (i > 15)
+ i = 15;
+ if (i < 0)
+ i = 0;
+
+ writel((i | (i << 4)), dw->regs + DW_WDT_TORR);
+
+ return 0;
+}
+
+static void dw_wdt_enable(struct dw_wdt *dw)
+{
+ u32 val = readl(dw->regs + DW_WDT_CR);
+
+ /* Enable watchdog */
+ val |= DW_WDT_CR_RMOD_OFFSET;
+ writel(val, dw->regs + DW_WDT_CR);
+}
+
+static int dw_wdt_reset(struct udevice *dev)
+{
+ struct dw_wdt *dw = dev_get_priv(dev);
+
+ if (dw_wdt_is_enabled(dw))
+ writel(DW_WDT_CRR_RESTART_VAL, dw->regs + DW_WDT_CRR);
+ else
+ dw_wdt_enable(dw);
+
+ return 0;
+}
+
+static int dw_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
+{
+ struct dw_wdt *dw = dev_get_priv(dev);
+
+ dw_wdt_set_timeout(dw, timeout);
+ dw_wdt_enable(dw);
+
+ return 0;
+}
+
+static int dw_wdt_probe(struct udevice *dev)
+{
+ struct dw_wdt *dw = dev_get_priv(dev);
+ struct clk clk;
+ int ret;
+
+ dw->regs = dev_remap_addr(dev);
+ if (!dw->regs)
+ return -EINVAL;
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (!ret)
+ dw->clk_rate = clk_get_rate(&clk);
+ else
+ return -EINVAL;
+
+ dw_wdt_reset(dev);
+
+ return 0;
+}
+
+static const struct wdt_ops dw_wdt_ops = {
+ .reset = dw_wdt_reset,
+ .start = dw_wdt_start,
+};
+
+static const struct udevice_id dw_wdt_ids[] = {
+ { .compatible = "snps,dw-wdt" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(dw_wdt) = {
+ .name = "dw_wdt",
+ .id = UCLASS_WDT,
+ .of_match = dw_wdt_ids,
+ .ops = &dw_wdt_ops,
+ .priv_auto_alloc_size = sizeof(struct dw_wdt),
+ .probe = dw_wdt_probe,
+};
+
+#else
+
+#include <watchdog.h>
+
/*
* Set the watchdog time interval.
* Counter is 32 bit.
@@ -70,3 +180,5 @@ void hw_watchdog_init(void)
hw_watchdog_reset();
}
#endif
+
+#endif /* CONFIG_WDT */
--
2.18.0.321.gffc6fa0e3
More information about the U-Boot
mailing list