[U-Boot] [PATCH 2/3] USB: host: Add the USB3 host driver
sherry sun
sherry.sun at nxp.com
Tue Jul 16 12:08:13 UTC 2019
From: Sherry Sun <sherry.sun at nxp.com>
This driver is ported from NXP i.MX U-Boot version imx_v2019.04
and some changes have also been made to adapt to U-Boot.
Add the USB3 host driver for NXP imx8 platform, and the
cadence IP is in it.
The USB3 host driver support DM mode. It will probe USB3
host node, enable the power and clk of both USB3 controller
and USB3 PHY.
Signed-off-by: Sherry Sun <sherry.sun at nxp.com>
---
drivers/usb/host/Kconfig | 9 +
drivers/usb/host/Makefile | 1 +
drivers/usb/host/xhci-imx8.c | 311 ++++++++++++++++++++++
include/usb/imx8_usb3_reg_def.h | 455 ++++++++++++++++++++++++++++++++
4 files changed, 776 insertions(+)
create mode 100644 drivers/usb/host/xhci-imx8.c
create mode 100644 include/usb/imx8_usb3_reg_def.h
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index b1188bcbf5..73c98e0cf4 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -94,6 +94,15 @@ config USB_XHCI_FSL
depends on !SPL_NO_USB
help
Enables support for the on-chip xHCI controller on NXP Layerscape SoCs.
+
+config USB_XHCI_IMX8
+ bool "XHCI support for imx8"
+ depends on ARCH_IMX8
+ default y
+ help
+ Enables support for the on-chip xHCI controller on imx8qm and
+ imx8qxp SoCs.
+
endif # USB_XHCI_HCD
config USB_EHCI_HCD
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 6aa574f6f7..e5a0a4ea5a 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
obj-$(CONFIG_USB_XHCI_RCAR) += xhci-rcar.o
obj-$(CONFIG_USB_XHCI_STI) += dwc3-sti-glue.o
+obj-$(CONFIG_USB_XHCI_IMX8) += xhci-imx8.o
# designware
obj-$(CONFIG_USB_DWC2) += dwc2.o
diff --git a/drivers/usb/host/xhci-imx8.c b/drivers/usb/host/xhci-imx8.c
new file mode 100644
index 0000000000..abac37d446
--- /dev/null
+++ b/drivers/usb/host/xhci-imx8.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ *
+ * NXP i.MX8 USB HOST xHCI Controller (Cadence IP)
+ *
+ * Author: Peter Chen <peter.chen at nxp.com>
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <malloc.h>
+#include <usb/imx8_usb3_reg_def.h>
+#include <dm.h>
+#include <clk.h>
+#include <power-domain.h>
+#include <asm/arch/clock.h>
+#include <linux/compat.h>
+#include "xhci.h"
+
+/* Declare global data pointer */
+DECLARE_GLOBAL_DATA_PTR;
+
+/* According to UG CH 3.1.1 Bring-up Sequence */
+static void imx_usb3_phy_init(void)
+{
+ writel(0x0830, PHY_PMA_CMN_CTRL1);
+ writel(0x10, TB_ADDR_CMN_DIAG_HSCLK_SEL);
+ writel(0x00F0, TB_ADDR_CMN_PLL0_VCOCAL_INIT_TMR);
+ writel(0x0018, TB_ADDR_CMN_PLL0_VCOCAL_ITER_TMR);
+ writel(0x00D0, TB_ADDR_CMN_PLL0_INTDIV);
+ writel(0x4aaa, TB_ADDR_CMN_PLL0_FRACDIV);
+ writel(0x0034, TB_ADDR_CMN_PLL0_HIGH_THR);
+ writel(0x1ee, TB_ADDR_CMN_PLL0_SS_CTRL1);
+ writel(0x7F03, TB_ADDR_CMN_PLL0_SS_CTRL2);
+ writel(0x0020, TB_ADDR_CMN_PLL0_DSM_DIAG);
+ writel(0x0000, TB_ADDR_CMN_DIAG_PLL0_OVRD);
+ writel(0x0000, TB_ADDR_CMN_DIAG_PLL0_FBH_OVRD);
+ writel(0x0000, TB_ADDR_CMN_DIAG_PLL0_FBL_OVRD);
+ writel(0x0007, TB_ADDR_CMN_DIAG_PLL0_V2I_TUNE);
+ writel(0x0027, TB_ADDR_CMN_DIAG_PLL0_CP_TUNE);
+ writel(0x0008, TB_ADDR_CMN_DIAG_PLL0_LF_PROG);
+ writel(0x0022, TB_ADDR_CMN_DIAG_PLL0_TEST_MODE);
+ writel(0x000a, TB_ADDR_CMN_PSM_CLK_CTRL);
+ writel(0x139, TB_ADDR_XCVR_DIAG_RX_LANE_CAL_RST_TMR);
+ writel(0xbefc, TB_ADDR_XCVR_PSM_RCTRL);
+
+ writel(0x7799, TB_ADDR_TX_PSC_A0);
+ writel(0x7798, TB_ADDR_TX_PSC_A1);
+ writel(0x509b, TB_ADDR_TX_PSC_A2);
+ writel(0x3, TB_ADDR_TX_DIAG_ECTRL_OVRD);
+ writel(0x5098, TB_ADDR_TX_PSC_A3);
+ writel(0x2090, TB_ADDR_TX_PSC_CAL);
+ writel(0x2090, TB_ADDR_TX_PSC_RDY);
+
+ writel(0xA6FD, TB_ADDR_RX_PSC_A0);
+ writel(0xA6FD, TB_ADDR_RX_PSC_A1);
+ writel(0xA410, TB_ADDR_RX_PSC_A2);
+ writel(0x2410, TB_ADDR_RX_PSC_A3);
+
+ writel(0x23FF, TB_ADDR_RX_PSC_CAL);
+ writel(0x2010, TB_ADDR_RX_PSC_RDY);
+
+ writel(0x0020, TB_ADDR_TX_TXCC_MGNLS_MULT_000);
+ writel(0x00ff, TB_ADDR_TX_DIAG_BGREF_PREDRV_DELAY);
+ writel(0x0002, TB_ADDR_RX_SLC_CU_ITER_TMR);
+ writel(0x0013, TB_ADDR_RX_SIGDET_HL_FILT_TMR);
+ writel(0x0000, TB_ADDR_RX_SAMP_DAC_CTRL);
+ writel(0x1004, TB_ADDR_RX_DIAG_SIGDET_TUNE);
+ writel(0x4041, TB_ADDR_RX_DIAG_LFPSDET_TUNE2);
+ writel(0x0480, TB_ADDR_RX_DIAG_BS_TM);
+ writel(0x8006, TB_ADDR_RX_DIAG_DFE_CTRL1);
+ writel(0x003f, TB_ADDR_RX_DIAG_ILL_IQE_TRIM4);
+ writel(0x543f, TB_ADDR_RX_DIAG_ILL_E_TRIM0);
+ writel(0x543f, TB_ADDR_RX_DIAG_ILL_IQ_TRIM0);
+ writel(0x0000, TB_ADDR_RX_DIAG_ILL_IQE_TRIM6);
+ writel(0x8000, TB_ADDR_RX_DIAG_RXFE_TM3);
+ writel(0x0003, TB_ADDR_RX_DIAG_RXFE_TM4);
+ writel(0x2408, TB_ADDR_RX_DIAG_LFPSDET_TUNE);
+ writel(0x05ca, TB_ADDR_RX_DIAG_DFE_CTRL3);
+ writel(0x0258, TB_ADDR_RX_DIAG_SC2C_DELAY);
+ writel(0x1fff, TB_ADDR_RX_REE_VGA_GAIN_NODFE);
+
+ writel(0x02c6, TB_ADDR_XCVR_PSM_CAL_TMR);
+ writel(0x0002, TB_ADDR_XCVR_PSM_A0BYP_TMR);
+ writel(0x02c6, TB_ADDR_XCVR_PSM_A0IN_TMR);
+ writel(0x0010, TB_ADDR_XCVR_PSM_A1IN_TMR);
+ writel(0x0010, TB_ADDR_XCVR_PSM_A2IN_TMR);
+ writel(0x0010, TB_ADDR_XCVR_PSM_A3IN_TMR);
+ writel(0x0010, TB_ADDR_XCVR_PSM_A4IN_TMR);
+ writel(0x0010, TB_ADDR_XCVR_PSM_A5IN_TMR);
+
+ writel(0x0002, TB_ADDR_XCVR_PSM_A0OUT_TMR);
+ writel(0x0002, TB_ADDR_XCVR_PSM_A1OUT_TMR);
+ writel(0x0002, TB_ADDR_XCVR_PSM_A2OUT_TMR);
+ writel(0x0002, TB_ADDR_XCVR_PSM_A3OUT_TMR);
+ writel(0x0002, TB_ADDR_XCVR_PSM_A4OUT_TMR);
+ writel(0x0002, TB_ADDR_XCVR_PSM_A5OUT_TMR);
+
+ /* Change rx detect parameter */
+ writel(0x960, TB_ADDR_TX_RCVDET_EN_TMR);
+ writel(0x01e0, TB_ADDR_TX_RCVDET_ST_TMR);
+ writel(0x0090, TB_ADDR_XCVR_DIAG_LANE_FCM_EN_MGN_TMR);
+
+ udelay(10);
+
+ /* force rx detect */
+/* writel(0xc000, TB_ADDR_TX_RCVDET_OVRD); */
+}
+
+void imx8_xhci_init(void)
+{
+ u32 tmp_data;
+
+ tmp_data = readl(USB3_SSPHY_STATUS);
+ writel(tmp_data, USB3_SSPHY_STATUS);
+ tmp_data = readl(USB3_SSPHY_STATUS);
+ while ((tmp_data & 0xf0000000) != 0xf0000000) {
+ printf("clkvld is incorrect = 0x%x\n", tmp_data);
+ udelay(10);
+ tmp_data = readl(USB3_SSPHY_STATUS);
+ }
+
+ tmp_data = readl(USB3_CORE_CTRL1);
+ tmp_data = (tmp_data & 0xfffffff8) | 0x202;
+ writel(tmp_data, USB3_CORE_CTRL1);
+ tmp_data &= ~0x04000000; /* clear PHY apb reset */
+ writel(tmp_data, USB3_CORE_CTRL1);
+ imx_usb3_phy_init();
+
+ tmp_data = readl(USB3_CORE_CTRL1);
+ tmp_data &= ~0xfc000000; /* clear all sw_rst */
+ writel(tmp_data, USB3_CORE_CTRL1);
+
+ debug("wait xhci_power_on_ready\n");
+ tmp_data = readl(USB3_CORE_STATUS);
+ while (!(tmp_data & 0x1000))
+ tmp_data = readl(USB3_CORE_STATUS);
+
+ debug("xhci_power_on_ready\n");
+
+ tmp_data = readl(USBSTS);
+ debug("waiting CNR 0x%x\n", tmp_data);
+ while (tmp_data & 0x800)
+ tmp_data = readl(USBSTS);
+
+ debug("check CNR has finished\n");
+}
+
+void imx8_xhci_reset(void)
+{
+ /* Set CORE ctrl to default value, that all rst are hold */
+ writel(0xfc000001, USB3_CORE_CTRL1);
+}
+
+static int xhci_imx8_power(struct udevice *dev, bool on)
+{
+ struct udevice usbotg_dev, phy_dev;
+ struct power_domain pd;
+ const void *blob = gd->fdt_blob;
+ int offset = dev_of_offset(dev);
+ int usbotg_off, phy_off;
+
+ usbotg_off = fdtdec_lookup_phandle(blob,
+ offset,
+ "cdns3,usb");
+ if (usbotg_off < 0)
+ return -EINVAL;
+ usbotg_dev.node = offset_to_ofnode(usbotg_off);
+
+ phy_off = fdtdec_lookup_phandle(blob,
+ usbotg_off,
+ "cdns3,usbphy");
+ if (phy_off < 0)
+ return -EINVAL;
+ phy_dev.node = offset_to_ofnode(phy_off);
+
+ if (on) {
+ if (!power_domain_get(&usbotg_dev, &pd)) {
+ if (power_domain_on(&pd))
+ return -EINVAL;
+ }
+ if (!power_domain_get(&phy_dev, &pd)) {
+ if (power_domain_on(&pd))
+ return -EINVAL;
+ }
+ } else {
+ if (!power_domain_get(&phy_dev, &pd)) {
+ if (power_domain_off(&pd))
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int xhci_imx8_clk(struct udevice *dev, bool on)
+{
+ int ret;
+ struct udevice usbotg_dev, phy_dev;
+ const void *blob = gd->fdt_blob;
+ int offset = dev_of_offset(dev);
+ int usbotg_off, phy_off;
+ struct clk_bulk clks;
+ struct clk phy_clk;
+
+ usbotg_off = fdtdec_lookup_phandle(blob,
+ offset,
+ "cdns3,usb");
+ if (usbotg_off < 0)
+ return -EINVAL;
+ usbotg_dev.node = offset_to_ofnode(usbotg_off);
+
+ phy_off = fdtdec_lookup_phandle(blob,
+ usbotg_off,
+ "cdns3,usbphy");
+ if (phy_off < 0)
+ return -EINVAL;
+ phy_dev.node = offset_to_ofnode(phy_off);
+
+ ret = clk_get_bulk(&usbotg_dev, &clks);
+ if (ret)
+ return ret;
+ ret = clk_get_by_name(&phy_dev, "main_clk", &phy_clk);
+ if (ret)
+ return ret;
+
+ if (on) {
+ ret = clk_enable_bulk(&clks);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(&phy_clk);
+ if (ret)
+ return ret;
+ } else {
+ clk_release_bulk(&clks);
+
+ if (phy_clk.dev) {
+ ret = clk_disable(&phy_clk);
+ if (ret)
+ return ret;
+ ret = clk_free(&phy_clk);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int xhci_imx8_probe(struct udevice *dev)
+{
+ struct xhci_hccr *hccr;
+ struct xhci_hcor *hcor;
+
+ int len;
+
+#if CONFIG_IS_ENABLED(POWER_DOMAIN)
+ xhci_imx8_power(dev, true);
+#endif
+
+#if CONFIG_IS_ENABLED(CLK)
+ xhci_imx8_clk(dev, true);
+#endif
+
+ imx8_xhci_init();
+
+ hccr = (struct xhci_hccr *)HCIVERSION_CAPLENGTH;
+ len = HC_LENGTH(xhci_readl(&hccr->cr_capbase));
+ hcor = (struct xhci_hcor *)((uintptr_t)hccr + len);
+ printf("XHCI-imx8 init hccr 0x%p and hcor 0x%p hc_length %d\n",
+ (uint32_t *)hccr, (uint32_t *)hcor, len);
+
+ return xhci_register(dev, hccr, hcor);
+}
+
+static int xhci_imx8_remove(struct udevice *dev)
+{
+ int ret = xhci_deregister(dev);
+
+ if (!ret)
+ imx8_xhci_reset();
+
+#if CONFIG_IS_ENABLED(CLK)
+ xhci_imx8_clk(dev, false);
+#endif
+
+#if CONFIG_IS_ENABLED(POWER_DOMAIN)
+ xhci_imx8_power(dev, false);
+#endif
+
+ return ret;
+}
+
+static const struct udevice_id xhci_usb_ids[] = {
+ { .compatible = "Cadence,usb3-host", },
+ { }
+};
+
+U_BOOT_DRIVER(xhci_imx8) = {
+ .name = "xhci_imx8",
+ .id = UCLASS_USB,
+ .of_match = xhci_usb_ids,
+ .probe = xhci_imx8_probe,
+ .remove = xhci_imx8_remove,
+ .ops = &xhci_usb_ops,
+ .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+ .priv_auto_alloc_size = sizeof(struct xhci_ctrl),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
diff --git a/include/usb/imx8_usb3_reg_def.h b/include/usb/imx8_usb3_reg_def.h
new file mode 100644
index 0000000000..dfa16e47e3
--- /dev/null
+++ b/include/usb/imx8_usb3_reg_def.h
@@ -0,0 +1,455 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ *
+ * NXP i.MX8 USB HOST xHCI Controller (Cadence IP) Register Definition
+ */
+
+#ifndef _IMX8_USB3_H_
+#define _IMX8_USB3_H_
+
+#define REG32(m) (m)
+
+#define USB3_REGS_BASE 0x5B110000
+#define USB3_CTRL_BASE (USB3_REGS_BASE + 0x00000)
+#define USB3_CORE_BASE (USB3_REGS_BASE + 0x10000)
+#define USB3_PHY_BASE (USB3_REGS_BASE + 0x50000)
+/* PHY registers */
+#define PHY_PMA_CMN_CTRL1 (USB3_PHY_BASE + 0xC800 * 4)
+#define TB_ADDR_CMN_DIAG_HSCLK_SEL (USB3_PHY_BASE + 0x01e0 * 4)
+#define TB_ADDR_CMN_PLL0_VCOCAL_INIT_TMR (USB3_PHY_BASE + 0x0084 * 4)
+#define TB_ADDR_CMN_PLL0_VCOCAL_ITER_TMR (USB3_PHY_BASE + 0x0085 * 4)
+#define TB_ADDR_CMN_PLL0_INTDIV (USB3_PHY_BASE + 0x0094 * 4)
+#define TB_ADDR_CMN_PLL0_FRACDIV (USB3_PHY_BASE + 0x0095 * 4)
+#define TB_ADDR_CMN_PLL0_HIGH_THR (USB3_PHY_BASE + 0x0096 * 4)
+#define TB_ADDR_CMN_PLL0_SS_CTRL1 (USB3_PHY_BASE + 0x0098 * 4)
+#define TB_ADDR_CMN_PLL0_SS_CTRL2 (USB3_PHY_BASE + 0x0099 * 4)
+#define TB_ADDR_CMN_PLL0_DSM_DIAG (USB3_PHY_BASE + 0x0097 * 4)
+#define TB_ADDR_CMN_DIAG_PLL0_OVRD (USB3_PHY_BASE + 0x01c2 * 4)
+#define TB_ADDR_CMN_DIAG_PLL0_FBH_OVRD (USB3_PHY_BASE + 0x01c0 * 4)
+#define TB_ADDR_CMN_DIAG_PLL0_FBL_OVRD (USB3_PHY_BASE + 0x01c1 * 4)
+#define TB_ADDR_CMN_DIAG_PLL0_V2I_TUNE (USB3_PHY_BASE + 0x01C5 * 4)
+#define TB_ADDR_CMN_DIAG_PLL0_CP_TUNE (USB3_PHY_BASE + 0x01C6 * 4)
+#define TB_ADDR_CMN_DIAG_PLL0_LF_PROG (USB3_PHY_BASE + 0x01C7 * 4)
+#define TB_ADDR_CMN_DIAG_PLL0_TEST_MODE (USB3_PHY_BASE + 0x01c4 * 4)
+#define TB_ADDR_CMN_PSM_CLK_CTRL (USB3_PHY_BASE + 0x0061 * 4)
+#define TB_ADDR_XCVR_DIAG_RX_LANE_CAL_RST_TMR (USB3_PHY_BASE + 0x40ea * 4)
+#define TB_ADDR_XCVR_PSM_RCTRL (USB3_PHY_BASE + 0x4001 * 4)
+#define TB_ADDR_TX_PSC_A0 (USB3_PHY_BASE + 0x4100 * 4)
+#define TB_ADDR_TX_PSC_A1 (USB3_PHY_BASE + 0x4101 * 4)
+#define TB_ADDR_TX_PSC_A2 (USB3_PHY_BASE + 0x4102 * 4)
+#define TB_ADDR_TX_PSC_A3 (USB3_PHY_BASE + 0x4103 * 4)
+#define TB_ADDR_TX_DIAG_ECTRL_OVRD (USB3_PHY_BASE + 0x41f5 * 4)
+#define TB_ADDR_TX_PSC_CAL (USB3_PHY_BASE + 0x4106 * 4)
+#define TB_ADDR_TX_PSC_RDY (USB3_PHY_BASE + 0x4107 * 4)
+#define TB_ADDR_RX_PSC_A0 (USB3_PHY_BASE + 0x8000 * 4)
+#define TB_ADDR_RX_PSC_A1 (USB3_PHY_BASE + 0x8001 * 4)
+#define TB_ADDR_RX_PSC_A2 (USB3_PHY_BASE + 0x8002 * 4)
+#define TB_ADDR_RX_PSC_A3 (USB3_PHY_BASE + 0x8003 * 4)
+#define TB_ADDR_RX_PSC_CAL (USB3_PHY_BASE + 0x8006 * 4)
+#define TB_ADDR_RX_PSC_RDY (USB3_PHY_BASE + 0x8007 * 4)
+#define TB_ADDR_TX_TXCC_MGNLS_MULT_000 (USB3_PHY_BASE + 0x4058 * 4)
+#define TB_ADDR_TX_DIAG_BGREF_PREDRV_DELAY (USB3_PHY_BASE + 0x41e7 * 4)
+#define TB_ADDR_RX_SLC_CU_ITER_TMR (USB3_PHY_BASE + 0x80e3 * 4)
+#define TB_ADDR_RX_SIGDET_HL_FILT_TMR (USB3_PHY_BASE + 0x8090 * 4)
+#define TB_ADDR_RX_SAMP_DAC_CTRL (USB3_PHY_BASE + 0x8058 * 4)
+#define TB_ADDR_RX_DIAG_SIGDET_TUNE (USB3_PHY_BASE + 0x81dc * 4)
+#define TB_ADDR_RX_DIAG_LFPSDET_TUNE2 (USB3_PHY_BASE + 0x81df * 4)
+#define TB_ADDR_RX_DIAG_BS_TM (USB3_PHY_BASE + 0x81f5 * 4)
+#define TB_ADDR_RX_DIAG_DFE_CTRL1 (USB3_PHY_BASE + 0x81d3 * 4)
+#define TB_ADDR_RX_DIAG_ILL_IQE_TRIM4 (USB3_PHY_BASE + 0x81c7 * 4)
+#define TB_ADDR_RX_DIAG_ILL_E_TRIM0 (USB3_PHY_BASE + 0x81c2 * 4)
+#define TB_ADDR_RX_DIAG_ILL_IQ_TRIM0 (USB3_PHY_BASE + 0x81c1 * 4)
+#define TB_ADDR_RX_DIAG_ILL_IQE_TRIM6 (USB3_PHY_BASE + 0x81c9 * 4)
+#define TB_ADDR_RX_DIAG_RXFE_TM3 (USB3_PHY_BASE + 0x81f8 * 4)
+#define TB_ADDR_RX_DIAG_RXFE_TM4 (USB3_PHY_BASE + 0x81f9 * 4)
+#define TB_ADDR_RX_DIAG_LFPSDET_TUNE (USB3_PHY_BASE + 0x81dd * 4)
+#define TB_ADDR_RX_DIAG_DFE_CTRL3 (USB3_PHY_BASE + 0x81d5 * 4)
+#define TB_ADDR_RX_DIAG_SC2C_DELAY (USB3_PHY_BASE + 0x81e1 * 4)
+#define TB_ADDR_RX_REE_VGA_GAIN_NODFE (USB3_PHY_BASE + 0x81bf * 4)
+#define TB_ADDR_XCVR_PSM_CAL_TMR (USB3_PHY_BASE + 0x4002 * 4)
+#define TB_ADDR_XCVR_PSM_A0BYP_TMR (USB3_PHY_BASE + 0x4004 * 4)
+#define TB_ADDR_XCVR_PSM_A0IN_TMR (USB3_PHY_BASE + 0x4003 * 4)
+#define TB_ADDR_XCVR_PSM_A1IN_TMR (USB3_PHY_BASE + 0x4005 * 4)
+#define TB_ADDR_XCVR_PSM_A2IN_TMR (USB3_PHY_BASE + 0x4006 * 4)
+#define TB_ADDR_XCVR_PSM_A3IN_TMR (USB3_PHY_BASE + 0x4007 * 4)
+#define TB_ADDR_XCVR_PSM_A4IN_TMR (USB3_PHY_BASE + 0x4008 * 4)
+#define TB_ADDR_XCVR_PSM_A5IN_TMR (USB3_PHY_BASE + 0x4009 * 4)
+#define TB_ADDR_XCVR_PSM_A0OUT_TMR (USB3_PHY_BASE + 0x400a * 4)
+#define TB_ADDR_XCVR_PSM_A1OUT_TMR (USB3_PHY_BASE + 0x400b * 4)
+#define TB_ADDR_XCVR_PSM_A2OUT_TMR (USB3_PHY_BASE + 0x400c * 4)
+#define TB_ADDR_XCVR_PSM_A3OUT_TMR (USB3_PHY_BASE + 0x400d * 4)
+#define TB_ADDR_XCVR_PSM_A4OUT_TMR (USB3_PHY_BASE + 0x400e * 4)
+#define TB_ADDR_XCVR_PSM_A5OUT_TMR (USB3_PHY_BASE + 0x400f * 4)
+#define TB_ADDR_TX_RCVDET_EN_TMR (USB3_PHY_BASE + 0x4122 * 4)
+#define TB_ADDR_TX_RCVDET_ST_TMR (USB3_PHY_BASE + 0x4123 * 4)
+#define TB_ADDR_XCVR_DIAG_LANE_FCM_EN_MGN_TMR (USB3_PHY_BASE + 0x40f2 * 4)
+
+/* Host registers */
+#define HCIVERSION_CAPLENGTH (USB3_CORE_BASE + 0x10000)
+#define HCSPARAMS1 (USB3_CORE_BASE + 0x10004)
+#define HCSPARAMS2 (USB3_CORE_BASE + 0x10008)
+#define HCSPARAMS3 (USB3_CORE_BASE + 0x1000c)
+#define HCCPARAMS (USB3_CORE_BASE + 0x10010)
+#define DBOFF (USB3_CORE_BASE + 0x10014)
+#define RTSOFF (USB3_CORE_BASE + 0x10018)
+#define USBCMD (USB3_CORE_BASE + 0x10080)
+#define USBSTS (USB3_CORE_BASE + 0x10084)
+#define PAGESIZE (USB3_CORE_BASE + 0x10088)
+#define DNCTRL (USB3_CORE_BASE + 0x10094)
+#define CRCR_LO (USB3_CORE_BASE + 0x10098)
+#define CRCR_HI (USB3_CORE_BASE + 0x1009c)
+#define DCBAAP_LO (USB3_CORE_BASE + 0x100b0)
+#define DCBAAP_HI (USB3_CORE_BASE + 0x100b4)
+#define CONFIG (USB3_CORE_BASE + 0x100b8)
+#define PORTSC1USB2 (USB3_CORE_BASE + 0x10480)
+#define PORTPMSC1USB2 (USB3_CORE_BASE + 0x10484)
+#define PORT1HLPMC (USB3_CORE_BASE + 0x1048c)
+#define PORTSC1USB3 (USB3_CORE_BASE + 0x10490)
+#define PORTPMSC1USB3 (USB3_CORE_BASE + 0x10494)
+#define PORTLI1 (USB3_CORE_BASE + 0x10498)
+#define MFINDEX (USB3_CORE_BASE + 0x12000)
+#define IMAN0 (USB3_CORE_BASE + 0x12020)
+#define IMOD0 (USB3_CORE_BASE + 0x12024)
+#define ERSTSZ0 (USB3_CORE_BASE + 0x12028)
+#define XHCI_RESERVED0 (USB3_CORE_BASE + 0x1202c)
+#define ERSTBA0_LO (USB3_CORE_BASE + 0x12030)
+#define ERSTBA0_HI (USB3_CORE_BASE + 0x12034)
+#define ERDP0_LO (USB3_CORE_BASE + 0x12038)
+#define ERDP0_HI (USB3_CORE_BASE + 0x1203c)
+#define IMAN1 (USB3_CORE_BASE + 0x12040)
+#define IMOD1 (USB3_CORE_BASE + 0x12044)
+#define ERSTSZ1 (USB3_CORE_BASE + 0x12048)
+#define XHCI_RESERVED1 (USB3_CORE_BASE + 0x1204c)
+#define ERSTBA1_LO (USB3_CORE_BASE + 0x12050)
+#define ERSTBA1_HI (USB3_CORE_BASE + 0x12054)
+#define ERDP1_LO (USB3_CORE_BASE + 0x12058)
+#define ERDP1_HI (USB3_CORE_BASE + 0x1205c)
+#define IMAN2 (USB3_CORE_BASE + 0x12060)
+#define IMOD2 (USB3_CORE_BASE + 0x12064)
+#define ERSTSZ2 (USB3_CORE_BASE + 0x12068)
+#define XHCI_RESERVED2 (USB3_CORE_BASE + 0x1206c)
+#define ERSTBA2_LO (USB3_CORE_BASE + 0x12070)
+#define ERSTBA2_HI (USB3_CORE_BASE + 0x12074)
+#define ERDP2_LO (USB3_CORE_BASE + 0x12078)
+#define ERDP2_HI (USB3_CORE_BASE + 0x1207c)
+#define IMAN3 (USB3_CORE_BASE + 0x12080)
+#define IMOD3 (USB3_CORE_BASE + 0x12084)
+#define ERSTSZ3 (USB3_CORE_BASE + 0x12088)
+#define XHCI_RESERVED3 (USB3_CORE_BASE + 0x1208c)
+#define ERSTBA3_LO (USB3_CORE_BASE + 0x12090)
+#define ERSTBA3_HI (USB3_CORE_BASE + 0x12094)
+#define ERDP3_LO (USB3_CORE_BASE + 0x12098)
+#define ERDP3_HI (USB3_CORE_BASE + 0x1209c)
+#define IMAN4 (USB3_CORE_BASE + 0x120a0)
+#define IMOD4 (USB3_CORE_BASE + 0x120a4)
+#define ERSTSZ4 (USB3_CORE_BASE + 0x120a8)
+#define XHCI_RESERVED4 (USB3_CORE_BASE + 0x120ac)
+#define ERSTBA4_LO (USB3_CORE_BASE + 0x120b0)
+#define ERSTBA4_HI (USB3_CORE_BASE + 0x120b4)
+#define ERDP4_LO (USB3_CORE_BASE + 0x120b8)
+#define ERDP4_HI (USB3_CORE_BASE + 0x120bc)
+#define IMAN5 (USB3_CORE_BASE + 0x120c0)
+#define IMOD5 (USB3_CORE_BASE + 0x120c4)
+#define ERSTSZ5 (USB3_CORE_BASE + 0x120c8)
+#define XHCI_RESERVED5 (USB3_CORE_BASE + 0x120cc)
+#define ERSTBA5_LO (USB3_CORE_BASE + 0x120d0)
+#define ERSTBA5_HI (USB3_CORE_BASE + 0x120d4)
+#define ERDP5_LO (USB3_CORE_BASE + 0x120d8)
+#define ERDP5_HI (USB3_CORE_BASE + 0x120dc)
+#define IMAN6 (USB3_CORE_BASE + 0x120e0)
+#define IMOD6 (USB3_CORE_BASE + 0x120e4)
+#define ERSTSZ6 (USB3_CORE_BASE + 0x120e8)
+#define XHCI_RESERVED6 (USB3_CORE_BASE + 0x120ec)
+#define ERSTBA6_LO (USB3_CORE_BASE + 0x120f0)
+#define ERSTBA6_HI (USB3_CORE_BASE + 0x120f4)
+#define ERDP6_LO (USB3_CORE_BASE + 0x120f8)
+#define ERDP6_HI (USB3_CORE_BASE + 0x120fc)
+#define IMAN7 (USB3_CORE_BASE + 0x12100)
+#define IMOD7 (USB3_CORE_BASE + 0x12104)
+#define ERSTSZ7 (USB3_CORE_BASE + 0x12108)
+#define XHCI_RESERVED7 (USB3_CORE_BASE + 0x1210c)
+#define ERSTBA7_LO (USB3_CORE_BASE + 0x12110)
+#define ERSTBA7_HI (USB3_CORE_BASE + 0x12114)
+#define ERDP7_LO (USB3_CORE_BASE + 0x12118)
+#define ERDP7_HI (USB3_CORE_BASE + 0x1211c)
+#define DB0 (USB3_CORE_BASE + 0x13000)
+#define DB1 (USB3_CORE_BASE + 0x13004)
+#define DB2 (USB3_CORE_BASE + 0x13008)
+#define DB3 (USB3_CORE_BASE + 0x1300c)
+#define DB4 (USB3_CORE_BASE + 0x13010)
+#define DB5 (USB3_CORE_BASE + 0x13014)
+#define DB6 (USB3_CORE_BASE + 0x13018)
+#define DB7 (USB3_CORE_BASE + 0x1301c)
+#define DB8 (USB3_CORE_BASE + 0x13020)
+#define DB9 (USB3_CORE_BASE + 0x13024)
+#define DB10 (USB3_CORE_BASE + 0x13028)
+#define DB11 (USB3_CORE_BASE + 0x1302c)
+#define DB12 (USB3_CORE_BASE + 0x13030)
+#define DB13 (USB3_CORE_BASE + 0x13034)
+#define DB14 (USB3_CORE_BASE + 0x13038)
+#define DB15 (USB3_CORE_BASE + 0x1303c)
+#define DB16 (USB3_CORE_BASE + 0x13040)
+#define DB17 (USB3_CORE_BASE + 0x13044)
+#define DB18 (USB3_CORE_BASE + 0x13048)
+#define DB19 (USB3_CORE_BASE + 0x1304c)
+#define DB20 (USB3_CORE_BASE + 0x13050)
+#define DB21 (USB3_CORE_BASE + 0x13054)
+#define DB22 (USB3_CORE_BASE + 0x13058)
+#define DB23 (USB3_CORE_BASE + 0x1305c)
+#define DB24 (USB3_CORE_BASE + 0x13060)
+#define DB25 (USB3_CORE_BASE + 0x13064)
+#define DB26 (USB3_CORE_BASE + 0x13068)
+#define DB27 (USB3_CORE_BASE + 0x1306c)
+#define DB28 (USB3_CORE_BASE + 0x13070)
+#define DB29 (USB3_CORE_BASE + 0x13074)
+#define DB30 (USB3_CORE_BASE + 0x13078)
+#define DB31 (USB3_CORE_BASE + 0x1307c)
+#define DB32 (USB3_CORE_BASE + 0x13080)
+#define XECP_PORT_CAP_REG (USB3_CORE_BASE + 0x18000)
+#define XECP_PORT_1_REG (USB3_CORE_BASE + 0x18004)
+#define XECP_CDNS_DEBUG_BUS_CAP (USB3_CORE_BASE + 0x18008)
+#define XECP_CDNS_DEBUG_BUS_CTRL (USB3_CORE_BASE + 0x1800c)
+#define XECP_CDNS_DEBUG_BUS_STATUS (USB3_CORE_BASE + 0x18010)
+#define XECP_PM_CAP (USB3_CORE_BASE + 0x18014)
+#define XECP_PM_PMCSR (USB3_CORE_BASE + 0x18018)
+#define XECP_MSI_CAP (USB3_CORE_BASE + 0x1801c)
+#define XECP_MSI_ADDR_L (USB3_CORE_BASE + 0x18020)
+#define XECP_MSI_ADDR_H (USB3_CORE_BASE + 0x18024)
+#define XECP_MSI_DATA (USB3_CORE_BASE + 0x18028)
+#define XECP_AXI_CAP (USB3_CORE_BASE + 0x1802c)
+#define XECP_AXI_CFG0 (USB3_CORE_BASE + 0x18030)
+#define XECP_AXI_CTRL0 (USB3_CORE_BASE + 0x18034)
+#define XECP_AXI_CTRL1 (USB3_CORE_BASE + 0x18038)
+#define XECP_AXI_CTRL2 (USB3_CORE_BASE + 0x1803c)
+#define XECP_SUPP_USB2_CAP0 (USB3_CORE_BASE + 0x18040)
+#define XECP_SUPP_USB2_CAP1 (USB3_CORE_BASE + 0x18044)
+#define XECP_SUPP_USB2_CAP2 (USB3_CORE_BASE + 0x18048)
+#define XECP_SUPP_USB2_PROTOCOL_SLOT_TYPE (USB3_CORE_BASE + 0x1804c)
+#define XECP_PSI_FULL_SPEED (USB3_CORE_BASE + 0x18050)
+#define XECP_PSI_LOW_SPEED (USB3_CORE_BASE + 0x18054)
+#define XECP_PSI_HIGH_SPEED (USB3_CORE_BASE + 0x18058)
+#define XECP_SUPP_USB3_CAP0 (USB3_CORE_BASE + 0x18060)
+#define XECP_SUPP_USB3_CAP1 (USB3_CORE_BASE + 0x18064)
+#define XECP_SUPP_USB3_CAP2 (USB3_CORE_BASE + 0x18068)
+#define XECP_SUPP_USB3_PROTOCOL_SLOT_TYPE (USB3_CORE_BASE + 0x1806c)
+#define PSI_SUPER_SPEED (USB3_CORE_BASE + 0x18070)
+#define XECP_CMDM_STS0 (USB3_CORE_BASE + 0x18080)
+#define XECP_CMDM_RESERVED_1 (USB3_CORE_BASE + 0x18084)
+#define XECP_CMDM_RESERVED_2 (USB3_CORE_BASE + 0x18088)
+#define XECP_CMDM_RESERVED_3 (USB3_CORE_BASE + 0x1808c)
+#define XECP_CMDM_RESERVED_4 (USB3_CORE_BASE + 0x18090)
+#define XECP_CMDM_RESERVED_5 (USB3_CORE_BASE + 0x18094)
+#define XECP_CMDM_CTRL_REG1 (USB3_CORE_BASE + 0x18098)
+#define XECP_CMDM_CTRL_REG2 (USB3_CORE_BASE + 0x1809c)
+#define XECP_CMDM_CTRL_REG3 (USB3_CORE_BASE + 0x180a0)
+#define XECP_HOST_CTRL_CAP (USB3_CORE_BASE + 0x180b0)
+#define XECP_HOST_CTRL_RSVD (USB3_CORE_BASE + 0x180b4)
+#define XECP_HOST_CLR_MASK_REG (USB3_CORE_BASE + 0x180b8)
+#define XECP_HOST_CLR_IN_EP_VALID_REG (USB3_CORE_BASE + 0x180bc)
+#define XECP_HOST_CLR_PMASK_REG (USB3_CORE_BASE + 0x180c0)
+#define XECP_HOST_CTRL_OCRD_REG (USB3_CORE_BASE + 0x180c4)
+#define XECP_HOST_CTRL_TEST_BUS_LO (USB3_CORE_BASE + 0x180c8)
+#define XECP_HOST_CTRL_TEST_BUS_HI (USB3_CORE_BASE + 0x180cc)
+#define XECP_HOST_CTRL_TRM_REG1 (USB3_CORE_BASE + 0x180d0)
+#define XECP_HOST_CTRL_SCH_REG1 (USB3_CORE_BASE + 0x180d4)
+#define XECP_HOST_CTRL_ODMA_REG (USB3_CORE_BASE + 0x180d8)
+#define XECP_HOST_CTRL_IDMA_REG (USB3_CORE_BASE + 0x180dc)
+#define XECP_HOST_CTRL_PORT_CTRL (USB3_CORE_BASE + 0x180e0)
+#define XECP_AUX_CTRL_REG (USB3_CORE_BASE + 0x18100)
+#define XECP_HOST_BW_OV_SS_REG (USB3_CORE_BASE + 0x18104)
+#define XECP_HOST_BW_OV_HS_REG (USB3_CORE_BASE + 0x18108)
+#define XECP_HOST_BW_OV_FS_LS_REG (USB3_CORE_BASE + 0x1810c)
+#define XECP_HOST_BW_OV_SYS_REG (USB3_CORE_BASE + 0x18110)
+#define XECP_HOST_CTRL_SCH_ASYNC_DELAY_REG (USB3_CORE_BASE + 0x18114)
+#define XECP_UPORTS_PON_RST_REG (USB3_CORE_BASE + 0x18118)
+#define XECP_HOST_CTRL_TRM_REG3 (USB3_CORE_BASE + 0x1811c)
+#define XECP_AUX_CTRL_REG1 (USB3_CORE_BASE + 0x18120)
+#define XECP_HOST_CTRL_WATERMARK_REG (USB3_CORE_BASE + 0x18128)
+#define XECP_HOST_CTRL_PORT_LINK_REG (USB3_CORE_BASE + 0x1812c)
+#define XECP_USB2_LINK_MGR_CTRL_REG1 (USB3_CORE_BASE + 0x18130)
+#define XECP_USB2_LINK_MGR_CTRL_REG2 (USB3_CORE_BASE + 0x18134)
+#define XECP_USB2_LINK_MGR_CTRL_REG3 (USB3_CORE_BASE + 0x18138)
+#define XECP_USB2_LINK_MGR_CTRL_REG4 (USB3_CORE_BASE + 0x1813c)
+#define XECP_HOST_CTRL_BW_MAX_REG (USB3_CORE_BASE + 0x18140)
+#define XECP_FPGA_REVISION_REG (USB3_CORE_BASE + 0x18144)
+#define XECP_HOST_INTF_CTRL_REG (USB3_CORE_BASE + 0x18148)
+#define XECP_BW_OV_SS_BURST_REG (USB3_CORE_BASE + 0x1814c)
+#define XECP_HOST_CTRL_TRM_REG2 (USB3_CORE_BASE + 0x18150)
+#define XECP_HOST_CTRL_BW_MAX1_REG (USB3_CORE_BASE + 0x18168)
+#define XECP_HOST_CTRL_BW_MAX2_REG (USB3_CORE_BASE + 0x1816c)
+#define XECP_USB2_LINESTATE_REG (USB3_CORE_BASE + 0x18170)
+#define XECP_HOST_PROTO_GAP_TIMER1_REG (USB3_CORE_BASE + 0x18174)
+#define XECP_HOST_PROTO_GAP_TIMER2_REG (USB3_CORE_BASE + 0x18178)
+#define XECP_HOST_PROTO_BTO_TIMER_REG (USB3_CORE_BASE + 0x1817c)
+#define XECP_HOST_CTRL_PSCH_REG (USB3_CORE_BASE + 0x18180)
+#define XECP_HOST_CTRL_PSCH1_REG (USB3_CORE_BASE + 0x18184)
+#define XECP_HOST_CTRL_LTM_REG (USB3_CORE_BASE + 0x18190)
+#define XECP_AUX_CTRL_REG2 (USB3_CORE_BASE + 0x18194)
+#define XECP_AUX_CTRL_REG3 (USB3_CORE_BASE + 0x18198)
+#define XECP_DEBUG_CTRL_REG (USB3_CORE_BASE + 0x1819c)
+#define XECP_HOST_CTRL_SCH_REG2 (USB3_CORE_BASE + 0x181a0)
+#define XECP_AUX_DEBUG_READ_ONLY (USB3_CORE_BASE + 0x181a4)
+#define XECP_AUX_CTRL_PORTNUM_REG (USB3_CORE_BASE + 0x181a8)
+#define XECP_AUX_CTRL_DEV_REMOVE_REG (USB3_CORE_BASE + 0x181ac)
+#define XECP_HOST_CTRL_DEBUG_PORT_DESC (USB3_CORE_BASE + 0x181b0)
+#define XECP_HOST_CTRL_DEBUG_PORT_TRM (USB3_CORE_BASE + 0x181b4)
+#define XECP_HOST_CTRL_DEBUG_PORT_IDMA (USB3_CORE_BASE + 0x181b8)
+#define XECP_HOST_CTRL_DEBUG_PORT_ODMA (USB3_CORE_BASE + 0x181bc)
+#define XECP_HOST_CTRL_DEBUG_PORT_MISC (USB3_CORE_BASE + 0x181c0)
+#define XECP_HOST_CTRL_TTE_REG1 (USB3_CORE_BASE + 0x181e0)
+#define XECP_HOST_CTRL_LTM_REG1 (USB3_CORE_BASE + 0x181e4)
+#define XECP_HOST_CTRL_LTM_REG2 (USB3_CORE_BASE + 0x181e8)
+#define XECP_AUX_SCRATCHPAD_0 (USB3_CORE_BASE + 0x18200)
+#define XECP_AUX_SCRATCHPAD_1 (USB3_CORE_BASE + 0x18204)
+#define XECP_BATTERY_CHARGE_REG (USB3_CORE_BASE + 0x18210)
+#define XECP_BATTERY_CHARGE_REG1 (USB3_CORE_BASE + 0x18214)
+#define XECP_BATTERY_CHARGE_REG2 (USB3_CORE_BASE + 0x18218)
+#define XECP_BATTERY_CHARGE_REG3 (USB3_CORE_BASE + 0x1821c)
+#define XECP_HOST_CTRL_PORT_LINK_REG1 (USB3_CORE_BASE + 0x18220)
+#define XECP_USBLEGSUP (USB3_CORE_BASE + 0x18370)
+#define XECP_USBLEGCTLSTS (USB3_CORE_BASE + 0x18374)
+#define XECP_DCID (USB3_CORE_BASE + 0x18380)
+#define XECP_DCDB (USB3_CORE_BASE + 0x18384)
+#define XECP_DCERSTSZ (USB3_CORE_BASE + 0x18388)
+#define XECP_RSVD_0C (USB3_CORE_BASE + 0x1838c)
+#define XECP_DCERSTBA_LOW (USB3_CORE_BASE + 0x18390)
+#define XECP_DCERSTBA_HIGH (USB3_CORE_BASE + 0x18394)
+#define XECP_DCERDP_LOW (USB3_CORE_BASE + 0x18398)
+#define XECP_DCERDP_HIGH (USB3_CORE_BASE + 0x1839c)
+#define XECP_DCCTRL (USB3_CORE_BASE + 0x183a0)
+#define XECP_DCST (USB3_CORE_BASE + 0x183a4)
+#define XECP_DCPORTSC (USB3_CORE_BASE + 0x183a8)
+#define XECP_RSVD_2C (USB3_CORE_BASE + 0x183ac)
+#define XECP_DCCP_LOW (USB3_CORE_BASE + 0x183b0)
+#define XECP_DCCP_HIGH (USB3_CORE_BASE + 0x183b4)
+#define XECP_DCDDI1 (USB3_CORE_BASE + 0x183b8)
+#define XECP_DCDDI2 (USB3_CORE_BASE + 0x183bc)
+#define XECP_USB3_TEST_PORT0_REG (USB3_CORE_BASE + 0x18800)
+
+/* OTG registers */
+#define OTGCMD (USB3_CORE_BASE + 0x0)
+#define OTGSTS (USB3_CORE_BASE + 0x4)
+#define OTGSTATE (USB3_CORE_BASE + 0x8)
+#define OTGREFCLK (USB3_CORE_BASE + 0xc)
+#define OTGIEN (USB3_CORE_BASE + 0x10)
+#define OTGIVECT (USB3_CORE_BASE + 0x14)
+#define OTGVERSION (USB3_CORE_BASE + 0x18)
+#define OTGSIMULATE (USB3_CORE_BASE + 0x1c)
+#define CLK_FREQ (USB3_CORE_BASE + 0x20)
+#define OTGTMR (USB3_CORE_BASE + 0x24)
+#define ADPBC_STS (USB3_CORE_BASE + 0xe0)
+#define ADP_RAMP_TIME (USB3_CORE_BASE + 0xe4)
+#define ADPBC_CTRL1 (USB3_CORE_BASE + 0xe8)
+#define ADPBC_CTRL2 (USB3_CORE_BASE + 0xec)
+#define SFR0 (USB3_CORE_BASE + 0xf0)
+#define SFR1 (USB3_CORE_BASE + 0xf4)
+#define SFR2 (USB3_CORE_BASE + 0xf8)
+#define SFR3 (USB3_CORE_BASE + 0xfc)
+
+/* Device registers */
+#define usb_conf (USB3_CORE_BASE + 0x20000)
+#define usb_sts (USB3_CORE_BASE + 0x20004)
+#define usb_cmd (USB3_CORE_BASE + 0x20008)
+#define usb_iptn (USB3_CORE_BASE + 0x2000c)
+#define usb_lpm (USB3_CORE_BASE + 0x20010)
+#define usb_ien (USB3_CORE_BASE + 0x20014)
+#define usb_ists (USB3_CORE_BASE + 0x20018)
+#define ep_sel (USB3_CORE_BASE + 0x2001c)
+#define ep_traddr (USB3_CORE_BASE + 0x20020)
+#define ep_cfg (USB3_CORE_BASE + 0x20024)
+#define ep_cmd (USB3_CORE_BASE + 0x20028)
+#define ep_sts (USB3_CORE_BASE + 0x2002c)
+#define ep_sts_sid (USB3_CORE_BASE + 0x20030)
+#define ep_sts_en (USB3_CORE_BASE + 0x20034)
+#define drbl (USB3_CORE_BASE + 0x20038)
+#define ep_ien (USB3_CORE_BASE + 0x2003c)
+#define ep_ists (USB3_CORE_BASE + 0x20040)
+#define usb_pwr (USB3_CORE_BASE + 0x20044)
+#define usb_conf2 (USB3_CORE_BASE + 0x20048)
+#define usb_cap1 (USB3_CORE_BASE + 0x2004c)
+#define usb_cap2 (USB3_CORE_BASE + 0x20050)
+#define usb_cap3 (USB3_CORE_BASE + 0x20054)
+#define usb_cap4 (USB3_CORE_BASE + 0x20058)
+#define usb_cap5 (USB3_CORE_BASE + 0x2005c)
+#define usb_cpkt1 (USB3_CORE_BASE + 0x20060)
+#define usb_cpkt2 (USB3_CORE_BASE + 0x20064)
+#define usb_cpkt3 (USB3_CORE_BASE + 0x20068)
+#define cfg_reg1 (USB3_CORE_BASE + 0x20100)
+#define dbg_link1 (USB3_CORE_BASE + 0x20104)
+#define dbg_link2 (USB3_CORE_BASE + 0x20108)
+#define cfg_reg4 (USB3_CORE_BASE + 0x2010c)
+#define cfg_reg5 (USB3_CORE_BASE + 0x20110)
+#define cfg_reg6 (USB3_CORE_BASE + 0x20114)
+#define cfg_reg7 (USB3_CORE_BASE + 0x20118)
+#define cfg_reg8 (USB3_CORE_BASE + 0x2011c)
+#define cfg_reg9 (USB3_CORE_BASE + 0x20120)
+#define cfg_reg10 (USB3_CORE_BASE + 0x20124)
+#define cfg_reg11 (USB3_CORE_BASE + 0x20128)
+#define cfg_reg12 (USB3_CORE_BASE + 0x2012c)
+#define cfg_reg13 (USB3_CORE_BASE + 0x20130)
+#define cfg_reg14 (USB3_CORE_BASE + 0x20134)
+#define cfg_reg15 (USB3_CORE_BASE + 0x20138)
+#define cfg_reg16 (USB3_CORE_BASE + 0x2013c)
+#define cfg_reg17 (USB3_CORE_BASE + 0x20140)
+#define cfg_reg18 (USB3_CORE_BASE + 0x20144)
+#define cfg_reg19 (USB3_CORE_BASE + 0x20148)
+#define cfg_reg20 (USB3_CORE_BASE + 0x2014c)
+#define cfg_reg21 (USB3_CORE_BASE + 0x20150)
+#define cfg_reg22 (USB3_CORE_BASE + 0x20154)
+#define cfg_reg23 (USB3_CORE_BASE + 0x20158)
+#define cfg_reg24 (USB3_CORE_BASE + 0x2015c)
+#define cfg_reg25 (USB3_CORE_BASE + 0x20160)
+#define cfg_reg26 (USB3_CORE_BASE + 0x20164)
+#define cfg_reg27 (USB3_CORE_BASE + 0x20168)
+#define cfg_reg28 (USB3_CORE_BASE + 0x2016c)
+#define cfg_reg29 (USB3_CORE_BASE + 0x20170)
+#define cfg_reg30 (USB3_CORE_BASE + 0x20174)
+#define cfg_reg31 (USB3_CORE_BASE + 0x20178)
+#define cfg_reg32 (USB3_CORE_BASE + 0x2017c)
+#define cfg_reg33 (USB3_CORE_BASE + 0x20180)
+#define cfg_reg34 (USB3_CORE_BASE + 0x20184)
+#define cfg_reg35 (USB3_CORE_BASE + 0x20188)
+#define cfg_reg36 (USB3_CORE_BASE + 0x201ac)
+#define cfg_reg37 (USB3_CORE_BASE + 0x201b0)
+#define cfg_reg38 (USB3_CORE_BASE + 0x201b4)
+#define cfg_reg39 (USB3_CORE_BASE + 0x201b8)
+#define cfg_reg40 (USB3_CORE_BASE + 0x201bc)
+#define cfg_reg41 (USB3_CORE_BASE + 0x201c0)
+#define cfg_reg42 (USB3_CORE_BASE + 0x201c4)
+#define cfg_reg43 (USB3_CORE_BASE + 0x201c8)
+#define cfg_reg44 (USB3_CORE_BASE + 0x201cc)
+#define cfg_reg45 (USB3_CORE_BASE + 0x201d0)
+#define cfg_reg46 (USB3_CORE_BASE + 0x201d4)
+#define cfg_reg47 (USB3_CORE_BASE + 0x201d8)
+#define cfg_reg48 (USB3_CORE_BASE + 0x201dc)
+#define cfg_reg49 (USB3_CORE_BASE + 0x201e0)
+#define cfg_reg50 (USB3_CORE_BASE + 0x201e4)
+#define cfg_reg51 (USB3_CORE_BASE + 0x201e8)
+#define cfg_reg52 (USB3_CORE_BASE + 0x201ec)
+#define cfg_reg53 (USB3_CORE_BASE + 0x201f0)
+#define cfg_reg54 (USB3_CORE_BASE + 0x201f4)
+#define cfg_reg55 (USB3_CORE_BASE + 0x201f8)
+#define cfg_reg56 (USB3_CORE_BASE + 0x201fc)
+#define cfg_reg57 (USB3_CORE_BASE + 0x20200)
+#define cfg_reg58 (USB3_CORE_BASE + 0x20204)
+#define cfg_reg59 (USB3_CORE_BASE + 0x20208)
+#define cfg_reg60 (USB3_CORE_BASE + 0x2020c)
+#define cfg_reg61 (USB3_CORE_BASE + 0x20210)
+#define cfg_reg62 (USB3_CORE_BASE + 0x20214)
+
+/* None-core registers */
+#define USB3_CORE_CTRL1 (USB3_CTRL_BASE + 0x00)
+#define USB3_CORE_CTRL2 (USB3_CTRL_BASE + 0x04)
+#define USB3_INT_REG (USB3_CTRL_BASE + 0x08)
+#define USB3_CORE_STATUS (USB3_CTRL_BASE + 0x0c)
+#define XHCI_DEBUG_LINK_ST (USB3_CTRL_BASE + 0x10)
+#define XHCI_DEBUG_BUS (USB3_CTRL_BASE + 0x14)
+#define USB3_SSPHY_CTRL1 (USB3_CTRL_BASE + 0x40)
+#define USB3_SSPHY_CTRL2 (USB3_CTRL_BASE + 0x44)
+#define USB3_SSPHY_STATUS (USB3_CTRL_BASE + 0x4c)
+#define USB2_PHY_CTRL1 (USB3_CTRL_BASE + 0x50)
+#define USB2_PHY_CTRL2 (USB3_CTRL_BASE + 0x54)
+#define USB2_PHY_STATUS (USB3_CTRL_BASE + 0x5c)
+
+#endif /* _IMX8_USB3_H_ */
--
2.17.1
More information about the U-Boot
mailing list