[U-Boot] [PATCH v2 2/2] configs: am57xx_evm_defconfig: Enable 'dtimg' command

[Sam Protsenko]

We are going to implement DTBO partition for BeagleBoard X15 further. To
support this, 'dtimg' command must be enabled.

Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
---
Changes in v2:
  - Handle HS defconfigs

 configs/am57xx_evm_defconfig        | 1 +
 configs/am57xx_hs_evm_defconfig     | 1 +
 configs/am57xx_hs_evm_usb_defconfig | 1 +
 3 files changed, 3 insertions(+)

diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index a1b8d2d988..96de6f48c9 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -28,6 +28,7 @@ CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_CMD_DTIMG=y
 CONFIG_CMD_SPL=y
 CONFIG_CMD_BCB=y
 # CONFIG_CMD_FLASH is not set
diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
index 4563e98401..d776a0b244 100644
--- a/configs/am57xx_hs_evm_defconfig
+++ b/configs/am57xx_hs_evm_defconfig
@@ -31,6 +31,7 @@ CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA_SUPPORT=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_CMD_DTIMG=y
 CONFIG_CMD_BCB=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig
index 20063d1ebb..6419c53296 100644
--- a/configs/am57xx_hs_evm_usb_defconfig
+++ b/configs/am57xx_hs_evm_usb_defconfig
@@ -36,6 +36,7 @@ CONFIG_SPL_SPI_LOAD=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_DFU=y
 CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_CMD_DTIMG=y
 CONFIG_CMD_BCB=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
-- 
2.20.1