[U-Boot] [PATCH v11 4/4] doc: sifive-fu540: Update README to explicitly load DTB for Linux
Anup Patel
Anup.Patel at wdc.com
Wed Jul 24 04:09:49 UTC 2019
We should explicitly load DTB from TFTP server or MMC/SD card
for Linux booting. This will allow us:
1. To use different Linux DTB for SiFive Unleashed board with
expansion board connected.
2. Avoid re-flashing OpenSBI firmware whenever board connections
change.
This patch updates reference bootlog in SiFive FU540 README
as-per above.
Signed-off-by: Anup Patel <anup.patel at wdc.com>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Reviewed-by: Joe Hershberger <joe.hershberger at ni.com>
---
doc/README.sifive-fu540 | 317 ++++++++++++++++++++++++----------------
1 file changed, 191 insertions(+), 126 deletions(-)
diff --git a/doc/README.sifive-fu540 b/doc/README.sifive-fu540
index 944ba1c8a0..a106c9206f 100644
--- a/doc/README.sifive-fu540
+++ b/doc/README.sifive-fu540
@@ -59,41 +59,64 @@ Once you plugin the sdcard and power up, you should see the U-Boot prompt.
Sample boot log from HiFive Unleashed board
===========================================
-U-Boot 2019.07-rc4-00013-g1837f893b0 (Jun 20 2019 - 11:08:48 +0530)
+U-Boot 2019.07-00024-g350ff02f5b (Jul 22 2019 - 11:45:02 +0530)
CPU: rv64imafdc
Model: SiFive HiFive Unleashed A00
DRAM: 8 GiB
+MMC: spi at 10050000:mmc at 0: 0
In: serial at 10010000
Out: serial at 10010000
Err: serial at 10010000
Net: eth0: ethernet at 10090000
Hit any key to stop autoboot: 0
=> version
-U-Boot 2019.07-rc4-00013-g1837f893b0 (Jun 20 2019 - 11:08:48 +0530)
+U-Boot 2019.07-00024-g350ff02f5b (Jul 22 2019 - 11:45:02 +0530)
riscv64-linux-gcc.br_real (Buildroot 2018.11-rc2-00003-ga0787e9) 8.2.0
GNU ld (GNU Binutils) 2.31.1
-=>
-===============================================================================
+=> mmc info
+Device: spi at 10050000:mmc at 0
+Manufacturer ID: 3
+OEM: 5344
+Name: SU08G
+Bus Speed: 20000000
+Mode: SD Legacy
+Rd Block Len: 512
+SD version 2.0
+High Capacity: Yes
+Capacity: 7.4 GiB
+Bus Width: 1-bit
+Erase Group Size: 512 Bytes
+=> mmc part
-Now you can configure your networking, tftp server and use tftp boot method to
-load uImage.
+Partition Map for MMC device 0 -- Partition Type: EFI
-==========================================================================
-=> setenv ipaddr 10.206.5.241
+Part Start LBA End LBA Name
+ Attributes
+ Type GUID
+ Partition GUID
+ 1 0x00000800 0x000107ff "bootloader"
+ attrs: 0x0000000000000000
+ type: 2e54b353-1271-4842-806f-e436d6af6985
+ guid: 393bbd36-7111-491c-9869-ce24008f6403
+ 2 0x00040800 0x00ecdfde ""
+ attrs: 0x0000000000000000
+ type: 0fc63daf-8483-4772-8e79-3d69d8477de4
+ guid: 7fc9a949-5480-48c7-b623-04923080757f
+=> setenv ipaddr 10.206.7.133
=> setenv netmask 255.255.252.0
=> setenv serverip 10.206.4.143
=> setenv gateway 10.206.4.1
-=> tftpboot ${kernel_addr_r} /sifive/fu540/uImage
+=> tftpboot ${kernel_addr_r} /sifive/fu540/Image
ethernet at 10090000: PHY present at 0
ethernet at 10090000: Starting autonegotiation...
ethernet at 10090000: Autonegotiation complete
-ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x7c00)
+ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x3c00)
Using ethernet at 10090000 device
-TFTP from server 10.206.4.143; our IP address is 10.206.5.241
-Filename '/sifive/fu540/uImage'.
-Load address: 0x80600000
+TFTP from server 10.206.4.143; our IP address is 10.206.7.133
+Filename '/sifive/fu540/Image'.
+Load address: 0x84000000
Loading: #################################################################
#################################################################
#################################################################
@@ -103,50 +126,77 @@ Loading: #################################################################
#################################################################
#################################################################
#################################################################
- ########################################
- 1.5 MiB/s
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ ##########################################
+ 1.2 MiB/s
done
-Bytes transferred = 9162364 (8bce7c hex)
+Bytes transferred = 8867100 (874d1c hex)
=> tftpboot ${ramdisk_addr_r} /sifive/fu540/uRamdisk
ethernet at 10090000: PHY present at 0
ethernet at 10090000: Starting autonegotiation...
ethernet at 10090000: Autonegotiation complete
-ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x7c00)
+ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x3c00)
Using ethernet at 10090000 device
-TFTP from server 10.206.4.143; our IP address is 10.206.5.241
+TFTP from server 10.206.4.143; our IP address is 10.206.7.133
Filename '/sifive/fu540/uRamdisk'.
-Load address: 0x82500000
+Load address: 0x88300000
Loading: #################################################################
#################################################################
- ##################################
- 448.2 KiB/s
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ ##############
+ 418.9 KiB/s
done
Bytes transferred = 2398272 (249840 hex)
-=> setenv bootargs "root=/dev/ram rw console=ttySIF0 earlycon=sbi"
-=> bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdtcontroladdr}
-## Booting kernel from Legacy Image at 80600000 ...
- Image Name: Linux
- Image Type: RISC-V Linux Kernel Image (uncompressed)
- Data Size: 9162300 Bytes = 8.7 MiB
- Load Address: 80200000
- Entry Point: 80200000
- Verifying Checksum ... OK
-## Loading init Ramdisk from Legacy Image at 82500000 ...
+=> tftpboot ${fdt_addr_r} /sifive/fu540/hifive-unleashed-a00.dtb
+ethernet at 10090000: PHY present at 0
+ethernet at 10090000: Starting autonegotiation...
+ethernet at 10090000: Autonegotiation complete
+ethernet at 10090000: link up, 1000Mbps full-duplex (lpa: 0x7c00)
+Using ethernet at 10090000 device
+TFTP from server 10.206.4.143; our IP address is 10.206.7.133
+Filename '/sifive/fu540/hifive-unleashed-a00.dtb'.
+Load address: 0x88000000
+Loading: ##
+ 1000 Bytes/s
+done
+Bytes transferred = 5614 (15ee hex)
+=> setenv bootargs "root=/dev/ram rw console=ttySIF0 ip=dhcp earlycon=sbi"
+=> booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
+## Loading init Ramdisk from Legacy Image at 88300000 ...
Image Name: Linux RootFS
Image Type: RISC-V Linux RAMDisk Image (uncompressed)
Data Size: 2398208 Bytes = 2.3 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
-## Flattened Device Tree blob at ff795730
- Booting using the fdt blob at 0xff795730
- Loading Kernel Image ... OK
- Using Device Tree in place at 00000000ff795730, end 00000000ff799dac
+## Flattened Device Tree blob at 88000000
+ Booting using the fdt blob at 0x88000000
+ Using Device Tree in place at 0000000088000000, end 00000000880045ed
Starting kernel ...
[ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
-[ 0.000000] Linux version 5.2.0-rc1-00003-gb9543e66e700 (anup at anup-lab-machine) (gcc version 8.2.0 (Buildroot 2018.11-rc2-00003-ga0787e9)) #1 SMP Thu Jun 20 11:41:26 IST 2019
+[ 0.000000] Linux version 5.3.0-rc1-00003-g460ac558152f (anup at anup-lab-machine) (gcc version 8.2.0 (Buildroot 2018.11-rc2-00003-ga0787e9)) #6 SMP Mon Jul 22 10:01:01 IST 2019
[ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
[ 0.000000] printk: bootconsole [sbi0] enabled
[ 0.000000] Initial ramdisk at: 0x(____ptrval____) (2398208 bytes)
@@ -157,17 +207,18 @@ Starting kernel ...
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080200000-0x000000027fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000027fffffff]
-[ 0.000000] software IO TLB: mapped [mem 0xfb795000-0xff795000] (64MB)
+[ 0.000000] software IO TLB: mapped [mem 0xfbfff000-0xfffff000] (64MB)
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] elf_hwcap is 0x112d
-[ 0.000000] percpu: Embedded 17 pages/cpu s29592 r8192 d31848 u69632
+[ 0.000000] percpu: Embedded 18 pages/cpu s34584 r8192 d30952 u73728
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2067975
-[ 0.000000] Kernel command line: root=/dev/ram rw console=ttySIF0 earlycon=sbi
-[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
-[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
+[ 0.000000] Kernel command line: root=/dev/ram rw console=ttySIF0 ip=dhcp earlycon=sbi
+[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
+[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Sorting __ex_table...
-[ 0.000000] Memory: 8182056K/8386560K available (5753K kernel code, 357K rwdata, 1804K rodata, 204K init, 808K bss, 204504K reserved, 0K cma-reserved)
+[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
+[ 0.000000] Memory: 8182308K/8386560K available (5916K kernel code, 368K rwdata, 1840K rodata, 213K init, 304K bss, 204252K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
@@ -175,91 +226,105 @@ Starting kernel ...
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
[ 0.000000] plic: mapped 53 interrupts with 4 handlers for 9 contexts.
-[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [2]
+[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
-[ 0.000007] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns
-[ 0.008553] Console: colour dummy device 80x25
-[ 0.012990] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000)
-[ 0.023103] pid_max: default: 32768 minimum: 301
-[ 0.028269] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
-[ 0.035068] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
-[ 0.042770] *** VALIDATE proc ***
-[ 0.045610] *** VALIDATE cgroup1 ***
-[ 0.049157] *** VALIDATE cgroup2 ***
-[ 0.053743] rcu: Hierarchical SRCU implementation.
-[ 0.058297] smp: Bringing up secondary CPUs ...
-[ 0.064134] smp: Brought up 1 node, 4 CPUs
-[ 0.069114] devtmpfs: initialized
-[ 0.073281] random: get_random_u32 called from bucket_table_alloc.isra.10+0x4e/0x160 with crng_init=0
-[ 0.082157] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
-[ 0.091634] futex hash table entries: 1024 (order: 4, 65536 bytes)
-[ 0.098480] NET: Registered protocol family 16
-[ 0.114101] vgaarb: loaded
-[ 0.116397] SCSI subsystem initialized
-[ 0.120358] usbcore: registered new interface driver usbfs
-[ 0.125541] usbcore: registered new interface driver hub
-[ 0.130936] usbcore: registered new device driver usb
-[ 0.136618] clocksource: Switched to clocksource riscv_clocksource
-[ 0.148108] NET: Registered protocol family 2
-[ 0.152358] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
-[ 0.159928] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
-[ 0.169027] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
-[ 0.178360] TCP: Hash tables configured (established 65536 bind 65536)
-[ 0.184653] UDP hash table entries: 4096 (order: 5, 131072 bytes)
-[ 0.190819] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
-[ 0.197618] NET: Registered protocol family 1
-[ 0.201892] RPC: Registered named UNIX socket transport module.
-[ 0.207395] RPC: Registered udp transport module.
-[ 0.212159] RPC: Registered tcp transport module.
-[ 0.216940] RPC: Registered tcp NFSv4.1 backchannel transport module.
-[ 0.223445] PCI: CLS 0 bytes, default 64
-[ 0.227726] Unpacking initramfs...
-[ 0.260556] Freeing initrd memory: 2336K
-[ 0.264652] workingset: timestamp_bits=62 max_order=21 bucket_order=0
-[ 0.278452] NFS: Registering the id_resolver key type
-[ 0.282841] Key type id_resolver registered
-[ 0.287067] Key type id_legacy registered
-[ 0.291155] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
-[ 0.298299] NET: Registered protocol family 38
-[ 0.302470] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
-[ 0.309906] io scheduler mq-deadline registered
-[ 0.314501] io scheduler kyber registered
-[ 0.354134] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-[ 0.360725] 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 4, base_baud = 0) is a SiFive UART v0
-[ 0.369191] printk: console [ttySIF0] enabled
-[ 0.369191] printk: console [ttySIF0] enabled
-[ 0.377938] printk: bootconsole [sbi0] disabled
-[ 0.377938] printk: bootconsole [sbi0] disabled
-[ 0.387298] 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 1, base_baud = 0) is a SiFive UART v0
-[ 0.396411] [drm] radeon kernel modesetting enabled.
-[ 0.409818] loop: module loaded
-[ 0.412606] libphy: Fixed MDIO Bus: probed
-[ 0.416870] macb 10090000.ethernet: Registered clk switch 'sifive-gemgxl-mgmt'
-[ 0.423570] macb: GEM doesn't support hardware ptp.
-[ 0.428469] libphy: MACB_mii_bus: probed
-[ 1.053009] Microsemi VSC8541 SyncE 10090000.ethernet-ffffffff:00: attached PHY driver [Microsemi VSC8541 SyncE] (mii_bus:phy_addr=10090000.ethernet-ffffffff:00, irq=POLL)
-[ 1.067548] macb 10090000.ethernet eth0: Cadence GEM rev 0x10070109 at 0x10090000 irq 7 (70:b3:d5:92:f2:f3)
-[ 1.077330] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
-[ 1.083069] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
-[ 1.089061] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-[ 1.095485] ehci-pci: EHCI PCI platform driver
-[ 1.099947] ehci-platform: EHCI generic platform driver
-[ 1.105196] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-[ 1.111286] ohci-pci: OHCI PCI platform driver
-[ 1.115742] ohci-platform: OHCI generic platform driver
-[ 1.121142] usbcore: registered new interface driver uas
-[ 1.126269] usbcore: registered new interface driver usb-storage
-[ 1.132331] mousedev: PS/2 mouse device common for all mice
-[ 1.137978] usbcore: registered new interface driver usbhid
-[ 1.143325] usbhid: USB HID core driver
-[ 1.148022] NET: Registered protocol family 10
-[ 1.152609] Segment Routing with IPv6
-[ 1.155571] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
-[ 1.161927] NET: Registered protocol family 17
-[ 1.165907] Key type dns_resolver registered
-[ 1.171694] Freeing unused kernel memory: 204K
-[ 1.175375] This architecture does not have kernel memory protection.
-[ 1.181792] Run /init as init process
+[ 0.000006] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns
+[ 0.008559] Console: colour dummy device 80x25
+[ 0.012989] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000)
+[ 0.023104] pid_max: default: 32768 minimum: 301
+[ 0.028273] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
+[ 0.035765] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
+[ 0.045307] rcu: Hierarchical SRCU implementation.
+[ 0.049875] smp: Bringing up secondary CPUs ...
+[ 0.055729] smp: Brought up 1 node, 4 CPUs
+[ 0.060599] devtmpfs: initialized
+[ 0.064819] random: get_random_u32 called from bucket_table_alloc.isra.10+0x4e/0x160 with crng_init=0
+[ 0.073720] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
+[ 0.083176] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
+[ 0.090721] NET: Registered protocol family 16
+[ 0.106319] vgaarb: loaded
+[ 0.108670] SCSI subsystem initialized
+[ 0.112515] usbcore: registered new interface driver usbfs
+[ 0.117758] usbcore: registered new interface driver hub
+[ 0.123167] usbcore: registered new device driver usb
+[ 0.128905] clocksource: Switched to clocksource riscv_clocksource
+[ 0.141239] NET: Registered protocol family 2
+[ 0.145506] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
+[ 0.153754] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
+[ 0.163466] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
+[ 0.173468] TCP: Hash tables configured (established 65536 bind 65536)
+[ 0.179739] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
+[ 0.186627] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
+[ 0.194117] NET: Registered protocol family 1
+[ 0.198417] RPC: Registered named UNIX socket transport module.
+[ 0.203887] RPC: Registered udp transport module.
+[ 0.208664] RPC: Registered tcp transport module.
+[ 0.213429] RPC: Registered tcp NFSv4.1 backchannel transport module.
+[ 0.219944] PCI: CLS 0 bytes, default 64
+[ 0.224170] Unpacking initramfs...
+[ 0.262347] Freeing initrd memory: 2336K
+[ 0.266531] workingset: timestamp_bits=62 max_order=21 bucket_order=0
+[ 0.280406] NFS: Registering the id_resolver key type
+[ 0.284798] Key type id_resolver registered
+[ 0.289048] Key type id_legacy registered
+[ 0.293114] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
+[ 0.300262] NET: Registered protocol family 38
+[ 0.304432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
+[ 0.311862] io scheduler mq-deadline registered
+[ 0.316461] io scheduler kyber registered
+[ 0.356421] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+[ 0.363004] 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 4, base_baud = 0) is a SiFive UART v0
+[ 0.371468] printk: console [ttySIF0] enabled
+[ 0.371468] printk: console [ttySIF0] enabled
+[ 0.380223] printk: bootconsole [sbi0] disabled
+[ 0.380223] printk: bootconsole [sbi0] disabled
+[ 0.389589] 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 1, base_baud = 0) is a SiFive UART v0
+[ 0.398680] [drm] radeon kernel modesetting enabled.
+[ 0.412395] loop: module loaded
+[ 0.415214] sifive_spi 10040000.spi: mapped; irq=3, cs=1
+[ 0.420628] sifive_spi 10050000.spi: mapped; irq=5, cs=1
+[ 0.425897] libphy: Fixed MDIO Bus: probed
+[ 0.429964] macb 10090000.ethernet: Registered clk switch 'sifive-gemgxl-mgmt'
+[ 0.436743] macb: GEM doesn't support hardware ptp.
+[ 0.441621] libphy: MACB_mii_bus: probed
+[ 0.601316] Microsemi VSC8541 SyncE 10090000.ethernet-ffffffff:00: attached PHY driver [Microsemi VSC8541 SyncE] (mii_bus:phy_addr=10090000.ethernet-ffffffff:00, irq=POLL)
+[ 0.615857] macb 10090000.ethernet eth0: Cadence GEM rev 0x10070109 at 0x10090000 irq 6 (70:b3:d5:92:f2:f3)
+[ 0.625634] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+[ 0.631381] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+[ 0.637382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[ 0.643799] ehci-pci: EHCI PCI platform driver
+[ 0.648261] ehci-platform: EHCI generic platform driver
+[ 0.653497] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+[ 0.659599] ohci-pci: OHCI PCI platform driver
+[ 0.664055] ohci-platform: OHCI generic platform driver
+[ 0.669448] usbcore: registered new interface driver uas
+[ 0.674575] usbcore: registered new interface driver usb-storage
+[ 0.680642] mousedev: PS/2 mouse device common for all mice
+[ 0.709493] mmc_spi spi1.0: SD/MMC host mmc0, no DMA, no WP, no poweroff, cd polling
+[ 0.716615] usbcore: registered new interface driver usbhid
+[ 0.722023] usbhid: USB HID core driver
+[ 0.726738] NET: Registered protocol family 10
+[ 0.731359] Segment Routing with IPv6
+[ 0.734332] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+[ 0.740687] NET: Registered protocol family 17
+[ 0.744660] Key type dns_resolver registered
+[ 0.806775] mmc0: host does not support reading read-only switch, assuming write-enable
+[ 0.814020] mmc0: new SDHC card on SPI
+[ 0.820137] mmcblk0: mmc0:0000 SU08G 7.40 GiB
+[ 0.850220] mmcblk0: p1 p2
+[ 3.821524] macb 10090000.ethernet eth0: link up (1000/Full)
+[ 3.828938] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
+[ 3.848919] Sending DHCP requests .., OK
+[ 6.252076] IP-Config: Got DHCP answer from 10.206.4.1, my address is 10.206.7.133
+[ 6.259624] IP-Config: Complete:
+[ 6.262831] device=eth0, hwaddr=70:b3:d5:92:f2:f3, ipaddr=10.206.7.133, mask=255.255.252.0, gw=10.206.4.1
+[ 6.272809] host=dhcp-10-206-7-133, domain=sdcorp.global.sandisk.com, nis-domain=(none)
+[ 6.281228] bootserver=10.206.126.11, rootserver=10.206.126.11, rootpath=
+[ 6.281232] nameserver0=10.86.1.1, nameserver1=10.86.2.1
+[ 6.294179] ntpserver0=10.86.1.1, ntpserver1=10.86.2.1
+[ 6.301026] Freeing unused kernel memory: 212K
+[ 6.304683] This architecture does not have kernel memory protection.
+[ 6.311121] Run /init as init process
_ _
| ||_|
| | _ ____ _ _ _ _
--
2.17.1
More information about the U-Boot
mailing list