[U-Boot] [PATCH] ARCH: imx: Call sata_remove() not on imx6 duallite/solo boards

[sbabic at denx.de]

> For a single binary approach for imx6 quad/dual/duallite/solo it
> is necessary to enable CONFIG_SATA for quad/dual. On the other hand
> on imx6 duallite/sole SATA is not available.
> Therefore sata_remove() is skipped according to a blacklist scheme.
> Adding further imx derivates is probably not recessary as they are
> usually not pin-compatible and therefore a different board with its
> own configuration.
> Signed-off-by: Ludwig Zenz <lzenz at dh-electronics.com>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================