[U-Boot] [PATCH v2 15/31] binman: Allow entries to expand after packing
Simon Glass
sjg at chromium.org
Mon Jul 8 20:25:37 UTC 2019
Add support for detecting entries that change size after they have already
been packed, and re-running packing when it happens.
This removes the limitation that entry size cannot change after
PackEntries() is called.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Avoid dual assignment in ResetForPack()
- Show a message when a section's size changes
- Use 3 packing passes instead of two, and add a comment
- Use bytearray for Python 3
tools/binman/README | 3 +-
tools/binman/bsection.py | 12 +++++
tools/binman/control.py | 51 +++++++++++++------
tools/binman/entry.py | 21 +++++++-
tools/binman/etype/_testing.py | 11 +++-
tools/binman/etype/section.py | 5 ++
tools/binman/etype/u_boot_with_ucode_ptr.py | 2 +-
tools/binman/ftest.py | 33 ++++++++++--
tools/binman/image.py | 8 +++
tools/binman/test/121_entry_expand.dts | 20 ++++++++
tools/binman/test/122_entry_expand_twice.dts | 21 ++++++++
.../binman/test/123_entry_expand_section.dts | 22 ++++++++
12 files changed, 184 insertions(+), 25 deletions(-)
create mode 100644 tools/binman/test/121_entry_expand.dts
create mode 100644 tools/binman/test/122_entry_expand_twice.dts
create mode 100644 tools/binman/test/123_entry_expand_section.dts
diff --git a/tools/binman/README b/tools/binman/README
index abbf809b823..9860633792f 100644
--- a/tools/binman/README
+++ b/tools/binman/README
@@ -566,7 +566,8 @@ tree. This sets the correct 'offset' and 'size' vaues, for example.
The default implementatoin does nothing. This can be overriden to adjust the
contents of an entry in some way. For example, it would be possible to create
an entry containing a hash of the contents of some other entries. At this
-stage the offset and size of entries should not be adjusted.
+stage the offset and size of entries should not be adjusted unless absolutely
+necessary, since it requires a repack (going back to PackEntries()).
10. WriteSymbols() - write the value of symbols into the U-Boot SPL binary.
See 'Access to binman entry offsets at run time' below for a description of
diff --git a/tools/binman/bsection.py b/tools/binman/bsection.py
index f49a6e93bc7..9047e55a34a 100644
--- a/tools/binman/bsection.py
+++ b/tools/binman/bsection.py
@@ -45,6 +45,8 @@ class Section(object):
_name_prefix: Prefix to add to the name of all entries within this
section
_entries: OrderedDict() of entries
+ _orig_offset: Original offset value read from node
+ _orig_size: Original size value read from node
"""
def __init__(self, name, parent_section, node, image, test=False):
global entry
@@ -76,6 +78,8 @@ class Section(object):
"""Read properties from the section node"""
self._offset = fdt_util.GetInt(self._node, 'offset')
self._size = fdt_util.GetInt(self._node, 'size')
+ self._orig_offset = self._offset
+ self._orig_size = self._size
self._align_size = fdt_util.GetInt(self._node, 'align-size')
if tools.NotPowerOfTwo(self._align_size):
self._Raise("Alignment size %s must be a power of two" %
@@ -257,6 +261,13 @@ class Section(object):
for name, info in offset_dict.items():
self._SetEntryOffsetSize(name, *info)
+ def ResetForPack(self):
+ """Reset offset/size fields so that packing can be done again"""
+ self._offset = self._orig_offset
+ self._size = self._orig_size
+ for entry in self._entries.values():
+ entry.ResetForPack()
+
def PackEntries(self):
"""Pack all entries into the section"""
offset = self._skip_at_start
@@ -325,6 +336,7 @@ class Section(object):
for entry in self._entries.values():
if not entry.ProcessContents():
sizes_ok = False
+ print("Entry '%s' size change" % self._node.path)
return sizes_ok
def WriteSymbols(self):
diff --git a/tools/binman/control.py b/tools/binman/control.py
index 9022cf76e99..35faf115062 100644
--- a/tools/binman/control.py
+++ b/tools/binman/control.py
@@ -170,21 +170,42 @@ def Binman(args):
# completed and written, but that does not seem important.
image.GetEntryContents()
image.GetEntryOffsets()
- try:
- image.PackEntries()
- image.CheckSize()
- image.CheckEntries()
- except Exception as e:
- if args.map:
- fname = image.WriteMap()
- print("Wrote map file '%s' to show errors" % fname)
- raise
- image.SetImagePos()
- if args.update_fdt:
- image.SetCalculatedProperties()
- for dtb_item in state.GetFdts():
- dtb_item.Sync()
- image.ProcessEntryContents()
+
+ # We need to pack the entries to figure out where everything
+ # should be placed. This sets the offset/size of each entry.
+ # However, after packing we call ProcessEntryContents() which
+ # may result in an entry changing size. In that case we need to
+ # do another pass. Since the device tree often contains the
+ # final offset/size information we try to make space for this in
+ # AddMissingProperties() above. However, if the device is
+ # compressed we cannot know this compressed size in advance,
+ # since changing an offset from 0x100 to 0x104 (for example) can
+ # alter the compressed size of the device tree. So we need a
+ # third pass for this.
+ passes = 3
+ for pack_pass in range(passes):
+ try:
+ image.PackEntries()
+ image.CheckSize()
+ image.CheckEntries()
+ except Exception as e:
+ if args.map:
+ fname = image.WriteMap()
+ print("Wrote map file '%s' to show errors" % fname)
+ raise
+ image.SetImagePos()
+ if args.update_fdt:
+ image.SetCalculatedProperties()
+ for dtb_item in state.GetFdts():
+ dtb_item.Sync()
+ sizes_ok = image.ProcessEntryContents()
+ if sizes_ok:
+ break
+ image.ResetForPack()
+ if not sizes_ok:
+ image.Raise('Entries expanded after packing (tried %s passes)' %
+ passes)
+
image.WriteSymbols()
image.BuildImage()
if args.map:
diff --git a/tools/binman/entry.py b/tools/binman/entry.py
index 7db1402b84f..e38cb71c596 100644
--- a/tools/binman/entry.py
+++ b/tools/binman/entry.py
@@ -61,6 +61,8 @@ class Entry(object):
pad_after: Number of pad bytes after the contents, 0 if none
data: Contents of entry (string of bytes)
compress: Compression algoithm used (e.g. 'lz4'), 'none' if none
+ orig_offset: Original offset value read from node
+ orig_size: Original size value read from node
"""
def __init__(self, section, etype, node, read_node=True, name_prefix=''):
self.section = section
@@ -153,6 +155,9 @@ class Entry(object):
self.Raise("Please use 'offset' instead of 'pos'")
self.offset = fdt_util.GetInt(self._node, 'offset')
self.size = fdt_util.GetInt(self._node, 'size')
+ self.orig_offset = self.offset
+ self.orig_size = self.size
+
self.align = fdt_util.GetInt(self._node, 'align')
if tools.NotPowerOfTwo(self.align):
raise ValueError("Node '%s': Alignment %s must be a power of two" %
@@ -255,9 +260,16 @@ class Entry(object):
ValueError if the new data size is not the same as the old
"""
size_ok = True
- if len(data) != self.contents_size:
+ new_size = len(data)
+ if state.AllowEntryExpansion():
+ if new_size > self.contents_size:
+ print("Entry '%s' size change from %#x to %#x" % (
+ self._node.path, self.contents_size, new_size))
+ # self.data will indicate the new size needed
+ size_ok = False
+ elif new_size != self.contents_size:
self.Raise('Cannot update entry size from %d to %d' %
- (self.contents_size, len(data)))
+ (self.contents_size, new_size))
self.SetContents(data)
return size_ok
@@ -271,6 +283,11 @@ class Entry(object):
# No contents by default: subclasses can implement this
return True
+ def ResetForPack(self):
+ """Reset offset/size fields so that packing can be done again"""
+ self.offset = self.orig_offset
+ self.size = self.orig_size
+
def Pack(self, offset):
"""Figure out how to pack the entry into the section
diff --git a/tools/binman/etype/_testing.py b/tools/binman/etype/_testing.py
index 2204362281c..ae24fe8105a 100644
--- a/tools/binman/etype/_testing.py
+++ b/tools/binman/etype/_testing.py
@@ -50,6 +50,8 @@ class Entry__testing(Entry):
'bad-update-contents')
self.return_contents_once = fdt_util.GetBool(self._node,
'return-contents-once')
+ self.bad_update_contents_twice = fdt_util.GetBool(self._node,
+ 'bad-update-contents-twice')
# Set to True when the entry is ready to process the FDT.
self.process_fdt_ready = False
@@ -71,11 +73,12 @@ class Entry__testing(Entry):
if self.force_bad_datatype:
self.GetEntryArgsOrProps([EntryArg('test-bad-datatype-arg', bool)])
self.return_contents = True
+ self.contents = b'a'
def ObtainContents(self):
if self.return_unknown_contents or not self.return_contents:
return False
- self.data = b'a'
+ self.data = self.contents
self.contents_size = len(self.data)
if self.return_contents_once:
self.return_contents = False
@@ -90,7 +93,11 @@ class Entry__testing(Entry):
if self.bad_update_contents:
# Request to update the contents with something larger, to cause a
# failure.
- return self.ProcessContentsUpdate('aa')
+ if self.bad_update_contents_twice:
+ self.contents += b'a'
+ else:
+ self.contents = b'aa'
+ return self.ProcessContentsUpdate(self.contents)
return True
def ProcessFdt(self, fdt):
diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py
index 51eddcd995a..23bf22113d4 100644
--- a/tools/binman/etype/section.py
+++ b/tools/binman/etype/section.py
@@ -64,6 +64,11 @@ class Entry_section(Entry):
self._section.GetEntryOffsets()
return {}
+ def ResetForPack(self):
+ """Reset offset/size fields so that packing can be done again"""
+ self._section.ResetForPack()
+ Entry.ResetForPack(self)
+
def Pack(self, offset):
"""Pack all entries into the section"""
self._section.PackEntries()
diff --git a/tools/binman/etype/u_boot_with_ucode_ptr.py b/tools/binman/etype/u_boot_with_ucode_ptr.py
index 4104bf8bf13..cb7dbc68dbb 100644
--- a/tools/binman/etype/u_boot_with_ucode_ptr.py
+++ b/tools/binman/etype/u_boot_with_ucode_ptr.py
@@ -49,7 +49,7 @@ class Entry_u_boot_with_ucode_ptr(Entry_blob):
def ProcessContents(self):
# If the image does not need microcode, there is nothing to do
if not self.target_offset:
- return
+ return True
# Get the offset of the microcode
ucode_entry = self.section.FindEntryType('u-boot-ucode')
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 1c917345f2a..aae8dbc1b33 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -1220,10 +1220,14 @@ class TestFunctional(unittest.TestCase):
def testBadChangeSize(self):
"""Test that trying to change the size of an entry fails"""
- with self.assertRaises(ValueError) as e:
- self._DoReadFile('059_change_size.dts', True)
- self.assertIn("Node '/binman/_testing': Cannot update entry size from "
- '1 to 2', str(e.exception))
+ try:
+ state.SetAllowEntryExpansion(False)
+ with self.assertRaises(ValueError) as e:
+ self._DoReadFile('059_change_size.dts', True)
+ self.assertIn("Node '/binman/_testing': Cannot update entry size from 1 to 2",
+ str(e.exception))
+ finally:
+ state.SetAllowEntryExpansion(True)
def testUpdateFdt(self):
"""Test that we can update the device tree with offset/size info"""
@@ -2117,6 +2121,27 @@ class TestFunctional(unittest.TestCase):
self.assertIn("Invalid location 'None', expected 'start' or 'end'",
str(e.exception))
+ def testEntryExpand(self):
+ """Test expanding an entry after it is packed"""
+ data = self._DoReadFile('121_entry_expand.dts')
+ self.assertEqual(b'aa', data[:2])
+ self.assertEqual(U_BOOT_DATA, data[2:2 + len(U_BOOT_DATA)])
+ self.assertEqual(b'aa', data[-2:])
+
+ def testEntryExpandBad(self):
+ """Test expanding an entry after it is packed, twice"""
+ with self.assertRaises(ValueError) as e:
+ self._DoReadFile('122_entry_expand_twice.dts')
+ self.assertIn("Image '/binman': Entries expanded after packing",
+ str(e.exception))
+
+ def testEntryExpandSection(self):
+ """Test expanding an entry within a section after it is packed"""
+ data = self._DoReadFile('123_entry_expand_section.dts')
+ self.assertEqual(b'aa', data[:2])
+ self.assertEqual(U_BOOT_DATA, data[2:2 + len(U_BOOT_DATA)])
+ self.assertEqual(b'aa', data[-2:])
+
if __name__ == "__main__":
unittest.main()
diff --git a/tools/binman/image.py b/tools/binman/image.py
index c8bce394aa1..6339d020e76 100644
--- a/tools/binman/image.py
+++ b/tools/binman/image.py
@@ -55,6 +55,10 @@ class Image:
self._filename = filename
self._section = bsection.Section('main-section', None, self._node, self)
+ def Raise(self, msg):
+ """Convenience function to raise an error referencing an image"""
+ raise ValueError("Image '%s': %s" % (self._node.path, msg))
+
def GetFdtSet(self):
"""Get the set of device tree files used by this image"""
return self._section.GetFdtSet()
@@ -100,6 +104,10 @@ class Image:
"""
self._section.GetEntryOffsets()
+ def ResetForPack(self):
+ """Reset offset/size fields so that packing can be done again"""
+ self._section.ResetForPack()
+
def PackEntries(self):
"""Pack all entries into the image"""
self._section.PackEntries()
diff --git a/tools/binman/test/121_entry_expand.dts b/tools/binman/test/121_entry_expand.dts
new file mode 100644
index 00000000000..ebb7816db90
--- /dev/null
+++ b/tools/binman/test/121_entry_expand.dts
@@ -0,0 +1,20 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ _testing {
+ bad-update-contents;
+ };
+
+ u-boot {
+ };
+
+ _testing2 {
+ type = "_testing";
+ bad-update-contents;
+ };
+ };
+};
diff --git a/tools/binman/test/122_entry_expand_twice.dts b/tools/binman/test/122_entry_expand_twice.dts
new file mode 100644
index 00000000000..258cf859f4b
--- /dev/null
+++ b/tools/binman/test/122_entry_expand_twice.dts
@@ -0,0 +1,21 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ _testing {
+ bad-update-contents;
+ bad-update-contents-twice;
+ };
+
+ u-boot {
+ };
+
+ _testing2 {
+ type = "_testing";
+ bad-update-contents;
+ };
+ };
+};
diff --git a/tools/binman/test/123_entry_expand_section.dts b/tools/binman/test/123_entry_expand_section.dts
new file mode 100644
index 00000000000..046f7234348
--- /dev/null
+++ b/tools/binman/test/123_entry_expand_section.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ _testing {
+ bad-update-contents;
+ };
+
+ u-boot {
+ };
+
+ section {
+ _testing2 {
+ type = "_testing";
+ bad-update-contents;
+ };
+ };
+ };
+};
--
2.22.0.410.gd8fdbe21b5-goog
More information about the U-Boot
mailing list