[U-Boot] [PATCH 1/2] configs: am65x_evm_a53: Disable K3_SYSTEM_CONTROLLER

[Lokesh Vutla]

On 29/07/19 10:18 PM, Suman Anna wrote:
> The K3 System Controller driver is used for loading and starting
> the System Firmware, and is used only on R5 SPL. It need not be
> enabled and built for the A53 U-Boot and SPL, so disable it from
> both the GP and HS AM65x A53 defconfigs.
> 
> While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and
> CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A53 SPL.
> 
> Signed-off-by: Suman Anna <s-anna at ti.com>
> ---
>  configs/am65x_evm_a53_defconfig    | 3 ---
>  configs/am65x_hs_evm_a53_defconfig | 3 ---
>  2 files changed, 6 deletions(-)
> 
> diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig
> index 2cf3a693fc70..d43df6a18765 100644
> --- a/configs/am65x_evm_a53_defconfig
> +++ b/configs/am65x_evm_a53_defconfig
> @@ -28,14 +28,12 @@ CONFIG_SPL_I2C_SUPPORT=y
>  CONFIG_SPL_DM_MAILBOX=y
>  CONFIG_SPL_DM_RESET=y
>  CONFIG_SPL_POWER_DOMAIN=y
> -CONFIG_SPL_REMOTEPROC=y
>  CONFIG_SPL_YMODEM_SUPPORT=y
>  CONFIG_CMD_ASKENV=y
>  # CONFIG_CMD_FLASH is not set
>  CONFIG_CMD_GPT=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
> -CONFIG_CMD_REMOTEPROC=y

CMD_REMOTEPROC will definitely be used in very near future. Please retain this.
Rest looks good to me.

Thanks and regards,
Lokesh

>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_TIME=y
>  # CONFIG_ISO_PARTITION is not set
> @@ -79,7 +77,6 @@ CONFIG_SPL_PINCTRL=y
>  CONFIG_PINCTRL_SINGLE=y
>  CONFIG_POWER_DOMAIN=y
>  CONFIG_TI_SCI_POWER_DOMAIN=y
> -CONFIG_K3_SYSTEM_CONTROLLER=y
>  CONFIG_DM_RESET=y
>  CONFIG_RESET_TI_SCI=y
>  CONFIG_DM_SERIAL=y
> diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig
> index 48b28b390ef1..8ac16f0372e4 100644
> --- a/configs/am65x_hs_evm_a53_defconfig
> +++ b/configs/am65x_hs_evm_a53_defconfig
> @@ -31,13 +31,11 @@ CONFIG_SPL_I2C_SUPPORT=y
>  CONFIG_SPL_DM_MAILBOX=y
>  CONFIG_SPL_DM_RESET=y
>  CONFIG_SPL_POWER_DOMAIN=y
> -CONFIG_SPL_REMOTEPROC=y
>  CONFIG_SPL_YMODEM_SUPPORT=y
>  CONFIG_CMD_ASKENV=y
>  # CONFIG_CMD_FLASH is not set
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
> -CONFIG_CMD_REMOTEPROC=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_TIME=y
>  # CONFIG_ISO_PARTITION is not set
> @@ -76,7 +74,6 @@ CONFIG_SPL_PINCTRL=y
>  CONFIG_PINCTRL_SINGLE=y
>  CONFIG_POWER_DOMAIN=y
>  CONFIG_TI_SCI_POWER_DOMAIN=y
> -CONFIG_K3_SYSTEM_CONTROLLER=y
>  CONFIG_DM_RESET=y
>  CONFIG_RESET_TI_SCI=y
>  CONFIG_DM_SERIAL=y
>