[U-Boot] [RESEND PATCH v2 14/15] arm: dts: agilex: Add base dtsi and devkit dts
Simon Goldschmidt
simon.k.r.goldschmidt at gmail.com
Tue Jul 9 20:41:45 UTC 2019
Am 04.07.2019 um 10:56 schrieb Ley Foon Tan:
> Add device tree files for Agilex SoC platform.
>
> Based on Linux Commit ID 4b36daf9ada30.
>
> Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
Tiny nit about NOR-flash see below.
>
> ---
> v2:
> - Add clock property to device node.
> - Change memory size to 8GB
> - Enable i2c1
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/socfpga_agilex.dtsi | 495 ++++++++++++++++++
> arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi | 71 +++
> arch/arm/dts/socfpga_agilex_socdk.dts | 136 +++++
> 4 files changed, 703 insertions(+)
> create mode 100644 arch/arm/dts/socfpga_agilex.dtsi
> create mode 100644 arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi
> create mode 100644 arch/arm/dts/socfpga_agilex_socdk.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 31ef2b66a3..1f1be102b1 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -294,6 +294,7 @@ dtb-$(CONFIG_TI816X) += dm8168-evm.dtb
> dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
>
> dtb-$(CONFIG_ARCH_SOCFPGA) += \
> + socfpga_agilex_socdk.dtb \
> socfpga_arria5_socdk.dtb \
> socfpga_arria10_socdk_sdmmc.dtb \
> socfpga_cyclone5_mcvevk.dtb \
> diff --git a/arch/arm/dts/socfpga_agilex.dtsi b/arch/arm/dts/socfpga_agilex.dtsi
> new file mode 100644
> index 0000000000..541274082d
> --- /dev/null
> +++ b/arch/arm/dts/socfpga_agilex.dtsi
> @@ -0,0 +1,495 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 Intel Corporation
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/clock/stratix10-clock.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/reset/altr,rst-mgr-s10.h>
> +
> +/ {
> + compatible = "intel,socfpga-agilex";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at 0 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + enable-method = "psci";
> + reg = <0x0>;
> + };
> +
> + cpu1: cpu at 1 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + enable-method = "psci";
> + reg = <0x1>;
> + };
> +
> + cpu2: cpu at 2 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + enable-method = "psci";
> + reg = <0x2>;
> + };
> +
> + cpu3: cpu at 3 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + enable-method = "psci";
> + reg = <0x3>;
> + };
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <0 120 8>,
> + <0 121 8>,
> + <0 122 8>,
> + <0 123 8>;
> + interrupt-affinity = <&cpu0>,
> + <&cpu1>,
> + <&cpu2>,
> + <&cpu3>;
> + interrupt-parent = <&intc>;
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + intc: intc at fffc1000 {
> + compatible = "arm,gic-400", "arm,cortex-a15-gic";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x0 0xfffc1000 0x0 0x1000>,
> + <0x0 0xfffc2000 0x0 0x2000>,
> + <0x0 0xfffc4000 0x0 0x2000>,
> + <0x0 0xfffc6000 0x0 0x2000>;
> + };
> +
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + device_type = "soc";
> + interrupt-parent = <&intc>;
> + ranges = <0 0 0 0xffffffff>;
> +
> + clkmgr: clock-controller at ffd10000 {
> + compatible = "intel,agilex-clkmgr";
> + reg = <0xffd10000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + gmac0: ethernet at ff800000 {
> + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
> + reg = <0xff800000 0x2000>;
> + interrupts = <0 90 4>;
> + interrupt-names = "macirq";
> + mac-address = [00 00 00 00 00 00];
> + resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
> + reset-names = "stmmaceth", "stmmaceth-ocp";
> + clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
> + clock-names = "stmmaceth";
> + tx-fifo-depth = <16384>;
> + rx-fifo-depth = <16384>;
> + snps,multicast-filter-bins = <256>;
> + iommus = <&smmu 1>;
> + altr,sysmgr-syscon = <&sysmgr 0x44 0>;
> + status = "disabled";
> + };
> +
> + gmac1: ethernet at ff802000 {
> + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
> + reg = <0xff802000 0x2000>;
> + interrupts = <0 91 4>;
> + interrupt-names = "macirq";
> + mac-address = [00 00 00 00 00 00];
> + resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
> + reset-names = "stmmaceth", "stmmaceth-ocp";
> + clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
> + clock-names = "stmmaceth";
> + tx-fifo-depth = <16384>;
> + rx-fifo-depth = <16384>;
> + snps,multicast-filter-bins = <256>;
> + iommus = <&smmu 2>;
> + altr,sysmgr-syscon = <&sysmgr 0x48 0>;
> + status = "disabled";
> + };
> +
> + gmac2: ethernet at ff804000 {
> + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
> + reg = <0xff804000 0x2000>;
> + interrupts = <0 92 4>;
> + interrupt-names = "macirq";
> + mac-address = [00 00 00 00 00 00];
> + resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
> + reset-names = "stmmaceth", "stmmaceth-ocp";
> + clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
> + clock-names = "stmmaceth";
> + tx-fifo-depth = <16384>;
> + rx-fifo-depth = <16384>;
> + snps,multicast-filter-bins = <256>;
> + iommus = <&smmu 3>;
> + altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
> + status = "disabled";
> + };
> +
> + gpio0: gpio at ffc03200 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dw-apb-gpio";
> + reg = <0xffc03200 0x100>;
> + resets = <&rst GPIO0_RESET>;
> + status = "disabled";
> +
> + porta: gpio-controller at 0 {
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <24>;
> + reg = <0>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <0 110 4>;
> + };
> + };
> +
> + gpio1: gpio at ffc03300 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dw-apb-gpio";
> + reg = <0xffc03300 0x100>;
> + resets = <&rst GPIO1_RESET>;
> + status = "disabled";
> +
> + portb: gpio-controller at 0 {
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <24>;
> + reg = <0>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <0 111 4>;
> + };
> + };
> +
> + i2c0: i2c at ffc02800 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0xffc02800 0x100>;
> + interrupts = <0 103 4>;
> + resets = <&rst I2C0_RESET>;
> + reset-names = "i2c";
> + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c at ffc02900 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0xffc02900 0x100>;
> + interrupts = <0 104 4>;
> + resets = <&rst I2C1_RESET>;
> + reset-names = "i2c";
> + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c at ffc02a00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0xffc02a00 0x100>;
> + interrupts = <0 105 4>;
> + resets = <&rst I2C2_RESET>;
> + reset-names = "i2c";
> + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c at ffc02b00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0xffc02b00 0x100>;
> + interrupts = <0 106 4>;
> + resets = <&rst I2C3_RESET>;
> + reset-names = "i2c";
> + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c at ffc02c00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0xffc02c00 0x100>;
> + interrupts = <0 107 4>;
> + resets = <&rst I2C4_RESET>;
> + reset-names = "i2c";
> + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> + status = "disabled";
> + };
> +
> + mmc: dwmmc0 at ff808000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "altr,socfpga-dw-mshc";
> + reg = <0xff808000 0x1000>;
> + interrupts = <0 96 4>;
> + fifo-depth = <0x400>;
> + resets = <&rst SDMMC_RESET>, <&rst SDMMC_OCP_RESET>;
> + reset-names = "reset", "sdmmc-ocp";
> + clocks = <&clkmgr STRATIX10_L4_MP_CLK>,
> + <&clkmgr STRATIX10_SDMMC_CLK>;
> + clock-names = "biu", "ciu";
> + iommus = <&smmu 5>;
> + status = "disabled";
> + };
> +
> + ocram: sram at ffe00000 {
> + compatible = "mmio-sram";
> + reg = <0xffe00000 0x40000>;
> + };
> +
> + pdma: pdma at ffda0000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0xffda0000 0x1000>;
> + interrupts = <0 81 4>,
> + <0 82 4>,
> + <0 83 4>,
> + <0 84 4>,
> + <0 85 4>,
> + <0 86 4>,
> + <0 87 4>,
> + <0 88 4>,
> + <0 89 4>;
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
> + clock-names = "apb_pclk";
> + };
> +
> + qspi: spi at ff8d2000 {
> + compatible = "cdns,qspi-nor";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xff8d2000 0x100>,
> + <0xff900000 0x100000>;
> + interrupts = <0 3 4>;
> + cdns,fifo-depth = <128>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x00000000>;
> + status = "disabled";
> + };
> +
> + rst: rstmgr at ffd11000 {
> + #reset-cells = <1>;
> + compatible = "altr,rst-mgr";
> + reg = <0xffd11000 0x100>;
> + altr,modrst-offset = <0x20>;
> + };
> +
> + smmu: iommu at fa000000 {
> + compatible = "arm,mmu-500", "arm,smmu-v2";
> + reg = <0xfa000000 0x40000>;
> + #global-interrupts = <2>;
> + #iommu-cells = <1>;
> + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
> + clock-names = "iommu";
> + interrupt-parent = <&intc>;
> + interrupts = <0 128 4>, /* Global Secure Fault */
> + <0 129 4>, /* Global Non-secure Fault */
> + /* Non-secure Context Interrupts (32) */
> + <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
> + <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
> + <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
> + <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
> + <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
> + <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
> + <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
> + <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
> + stream-match-mask = <0x7ff0>;
> + status = "disabled";
> + };
> +
> + spi0: spi at ffda4000 {
> + compatible = "snps,dw-apb-ssi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xffda4000 0x1000>;
> + interrupts = <0 99 4>;
> + resets = <&rst SPIM0_RESET>;
> + reg-io-width = <4>;
> + num-cs = <4>;
> + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
> + status = "disabled";
> + };
> +
> + spi1: spi at ffda5000 {
> + compatible = "snps,dw-apb-ssi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xffda5000 0x1000>;
> + interrupts = <0 100 4>;
> + resets = <&rst SPIM1_RESET>;
> + reg-io-width = <4>;
> + num-cs = <4>;
> + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
> + status = "disabled";
> + };
> +
> + sysmgr: sysmgr at ffd12000 {
> + compatible = "altr,sys-mgr", "syscon";
> + reg = <0xffd12000 0x500>;
> + };
> +
> + /* Local timer */
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <1 13 0xf08>,
> + <1 14 0xf08>,
> + <1 11 0xf08>,
> + <1 10 0xf08>;
> + };
> +
> + timer0: timer0 at ffc03000 {
> + compatible = "snps,dw-apb-timer";
> + interrupts = <0 113 4>;
> + reg = <0xffc03000 0x100>;
> + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> + clock-names = "timer";
> + };
> +
> + timer1: timer1 at ffc03100 {
> + compatible = "snps,dw-apb-timer";
> + interrupts = <0 114 4>;
> + reg = <0xffc03100 0x100>;
> + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> + clock-names = "timer";
> + };
> +
> + timer2: timer2 at ffd00000 {
> + compatible = "snps,dw-apb-timer";
> + interrupts = <0 115 4>;
> + reg = <0xffd00000 0x100>;
> + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> + clock-names = "timer";
> + };
> +
> + timer3: timer3 at ffd00100 {
> + compatible = "snps,dw-apb-timer";
> + interrupts = <0 116 4>;
> + reg = <0xffd00100 0x100>;
> + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> + clock-names = "timer";
> + };
> +
> + uart0: serial0 at ffc02000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0xffc02000 0x100>;
> + interrupts = <0 108 4>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + resets = <&rst UART0_RESET>;
> + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> + status = "disabled";
> + };
> +
> + uart1: serial1 at ffc02100 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0xffc02100 0x100>;
> + interrupts = <0 109 4>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + resets = <&rst UART1_RESET>;
> + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> + status = "disabled";
> + };
> +
> + usbphy0: usbphy at 0 {
> + #phy-cells = <0>;
> + compatible = "usb-nop-xceiv";
> + status = "okay";
> + };
> +
> + usb0: usb at ffb00000 {
> + compatible = "snps,dwc2";
> + reg = <0xffb00000 0x40000>;
> + interrupts = <0 93 4>;
> + phys = <&usbphy0>;
> + phy-names = "usb2-phy";
> + resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
> + reset-names = "dwc2", "dwc2-ecc";
> + clocks = <&clkmgr STRATIX10_USB_CLK>;
> + iommus = <&smmu 6>;
> + status = "disabled";
> + };
> +
> + usb1: usb at ffb40000 {
> + compatible = "snps,dwc2";
> + reg = <0xffb40000 0x40000>;
> + interrupts = <0 94 4>;
> + phys = <&usbphy0>;
> + phy-names = "usb2-phy";
> + resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
> + reset-names = "dwc2", "dwc2-ecc";
> + clocks = <&clkmgr STRATIX10_USB_CLK>;
> + iommus = <&smmu 7>;
> + status = "disabled";
> + };
> +
> + watchdog0: watchdog at ffd00200 {
> + compatible = "snps,dw-wdt";
> + reg = <0xffd00200 0x100>;
> + interrupts = <0 117 4>;
> + resets = <&rst WATCHDOG0_RESET>;
> + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
> + status = "disabled";
> + };
> +
> + watchdog1: watchdog at ffd00300 {
> + compatible = "snps,dw-wdt";
> + reg = <0xffd00300 0x100>;
> + interrupts = <0 118 4>;
> + resets = <&rst WATCHDOG1_RESET>;
> + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
> + status = "disabled";
> + };
> +
> + watchdog2: watchdog at ffd00400 {
> + compatible = "snps,dw-wdt";
> + reg = <0xffd00400 0x100>;
> + interrupts = <0 125 4>;
> + resets = <&rst WATCHDOG2_RESET>;
> + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
> + status = "disabled";
> + };
> +
> + watchdog3: watchdog at ffd00500 {
> + compatible = "snps,dw-wdt";
> + reg = <0xffd00500 0x100>;
> + interrupts = <0 126 4>;
> + resets = <&rst WATCHDOG3_RESET>;
> + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
> + status = "disabled";
> + };
> +
> + sdr: sdr at f8011100 {
> + compatible = "altr,sdr-ctl", "syscon";
> + reg = <0xf8011100 0xc0>;
> + };
> + };
> +};
> diff --git a/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi b/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi
> new file mode 100644
> index 0000000000..f66745f94d
> --- /dev/null
> +++ b/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi
> @@ -0,0 +1,71 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * U-Boot additions
> + *
> + * Copyright (C) 2019 Intel Corporation <www.intel.com>
> + */
> +
> +/{
> + aliases {
> + spi0 = &qspi;
> + };
> +
> + memory {
> + u-boot,dm-pre-reloc;
> + };
> +
> + soc {
> + u-boot,dm-pre-reloc;
> + };
> +};
> +
> +&clkmgr {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&flash0 {
> + compatible = "jedec,spi-nor";
> + spi-max-frequency = <100000000>;
> + spi-tx-bus-width = <4>;
> + spi-rx-bus-width = <4>;
> + u-boot,dm-pre-reloc;
> +};
> +
> +&mmc {
> + drvsel = <3>;
> + smplsel = <0>;
> + u-boot,dm-pre-reloc;
> +};
> +
> +&porta {
> + bank-name = "porta";
> +};
> +
> +&portb {
> + bank-name = "portb";
> +};
> +
> +&qspi {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&rst {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&sdr {
> + compatible = "altr,sdr-ctl-agilex";
> + reg = <0xf8000400 0x80>,
> + <0xf8010000 0x190>,
> + <0xf8011000 0x500>;
> + resets = <&rst DDRSCH_RESET>;
> + u-boot,dm-pre-reloc;
> +};
> +
> +&uart0 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&watchdog0 {
> + u-boot,dm-pre-reloc;
> +};
> diff --git a/arch/arm/dts/socfpga_agilex_socdk.dts b/arch/arm/dts/socfpga_agilex_socdk.dts
> new file mode 100644
> index 0000000000..32ebc03478
> --- /dev/null
> +++ b/arch/arm/dts/socfpga_agilex_socdk.dts
> @@ -0,0 +1,136 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 Intel Corporation
> + */
> +
> +#include "socfpga_agilex.dtsi"
> +
> +/ {
> + model = "SoCFPGA Agilex SoCDK";
> +
> + aliases {
> + ethernet0 = &gmac0;
> + i2c0 = &i2c1;
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + hps0 {
> + label = "hps_led0";
> + gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
> + };
> +
> + hps1 {
> + label = "hps_led1";
> + gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
> + };
> +
> + hps2 {
> + label = "hps_led2";
> + gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + memory {
> + device_type = "memory";
> + /* 8GB */
> + reg = <0 0x00000000 0 0x80000000>,
> + <2 0x00000000 1 0x80000000>;
> + };
> +};
> +
> +&gpio1 {
> + status = "okay";
> +};
> +
> +&gmac0 {
> + status = "okay";
> + phy-mode = "rgmii";
> + phy-handle = <&phy0>;
> +
> + max-frame-size = <3800>;
> +
> + mdio0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + phy0: ethernet-phy at 0 {
> + reg = <4>;
> +
> + txd0-skew-ps = <0>; /* -420ps */
> + txd1-skew-ps = <0>; /* -420ps */
> + txd2-skew-ps = <0>; /* -420ps */
> + txd3-skew-ps = <0>; /* -420ps */
> + rxd0-skew-ps = <420>; /* 0ps */
> + rxd1-skew-ps = <420>; /* 0ps */
> + rxd2-skew-ps = <420>; /* 0ps */
> + rxd3-skew-ps = <420>; /* 0ps */
> + txen-skew-ps = <0>; /* -420ps */
> + txc-skew-ps = <1860>; /* 960ps */
> + rxdv-skew-ps = <420>; /* 0ps */
> + rxc-skew-ps = <1680>; /* 780ps */
> + };
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +};
> +
> +&mmc {
> + status = "okay";
> + cap-sd-highspeed;
> + cap-mmc-highspeed;
> + broken-cd;
> + bus-width = <4>;
> +};
> +
> +&qspi {
> + status = "okay";
> +
> + flash0: flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "n25q00a";
Why don't you change Linux dts to include both compatibles (i.e.
"jedec,spi-nor" as generic fallback compatible)?
Regards,
Simon
> + reg = <0>;
> + spi-max-frequency = <50000000>;
> +
> + m25p,fast-read;
> + cdns,page-size = <256>;
> + cdns,block-size = <16>;
> + cdns,read-delay = <1>;
> + cdns,tshsl-ns = <50>;
> + cdns,tsd2d-ns = <50>;
> + cdns,tchsh-ns = <4>;
> + cdns,tslch-ns = <4>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + qspi_boot: partition at 0 {
> + label = "Boot and fpga data";
> + reg = <0x0 0x4000000>;
> + };
> +
> + qspi_rootfs: partition at 4000000 {
> + label = "Root Filesystem - JFFS2";
> + reg = <0x4000000 0x4000000>;
> + };
> + };
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
>
More information about the U-Boot
mailing list