[U-Boot] [RESEND PATCH v2 14/15] arm: dts: agilex: Add base dtsi and devkit dts
Ley Foon Tan
lftan.linux at gmail.com
Wed Jul 10 22:40:50 UTC 2019
On Tue, Jul 9, 2019 at 1:42 PM Simon Goldschmidt
<simon.k.r.goldschmidt at gmail.com> wrote:
>
> Am 04.07.2019 um 10:56 schrieb Ley Foon Tan:
> > Add device tree files for Agilex SoC platform.
> >
> > Based on Linux Commit ID 4b36daf9ada30.
> >
> > Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
>
> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
>
> Tiny nit about NOR-flash see below.
>
> >
> > ---
> > v2:
> > - Add clock property to device node.
> > - Change memory size to 8GB
> > - Enable i2c1
> > ---
> > arch/arm/dts/Makefile | 1 +
> > arch/arm/dts/socfpga_agilex.dtsi | 495 ++++++++++++++++++
> > arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi | 71 +++
> > arch/arm/dts/socfpga_agilex_socdk.dts | 136 +++++
> > 4 files changed, 703 insertions(+)
> > create mode 100644 arch/arm/dts/socfpga_agilex.dtsi
> > create mode 100644 arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi
> > create mode 100644 arch/arm/dts/socfpga_agilex_socdk.dts
> >
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > index 31ef2b66a3..1f1be102b1 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -294,6 +294,7 @@ dtb-$(CONFIG_TI816X) += dm8168-evm.dtb
> > dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
> >
> > dtb-$(CONFIG_ARCH_SOCFPGA) += \
> > + socfpga_agilex_socdk.dtb \
> > socfpga_arria5_socdk.dtb \
> > socfpga_arria10_socdk_sdmmc.dtb \
> > socfpga_cyclone5_mcvevk.dtb \
> > diff --git a/arch/arm/dts/socfpga_agilex.dtsi b/arch/arm/dts/socfpga_agilex.dtsi
> > new file mode 100644
> > index 0000000000..541274082d
> > --- /dev/null
> > +++ b/arch/arm/dts/socfpga_agilex.dtsi
> > @@ -0,0 +1,495 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2019 Intel Corporation
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/clock/stratix10-clock.h>
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/reset/altr,rst-mgr-s10.h>
> > +
> > +/ {
> > + compatible = "intel,socfpga-agilex";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu0: cpu at 0 {
> > + compatible = "arm,cortex-a53";
> > + device_type = "cpu";
> > + enable-method = "psci";
> > + reg = <0x0>;
> > + };
> > +
> > + cpu1: cpu at 1 {
> > + compatible = "arm,cortex-a53";
> > + device_type = "cpu";
> > + enable-method = "psci";
> > + reg = <0x1>;
> > + };
> > +
> > + cpu2: cpu at 2 {
> > + compatible = "arm,cortex-a53";
> > + device_type = "cpu";
> > + enable-method = "psci";
> > + reg = <0x2>;
> > + };
> > +
> > + cpu3: cpu at 3 {
> > + compatible = "arm,cortex-a53";
> > + device_type = "cpu";
> > + enable-method = "psci";
> > + reg = <0x3>;
> > + };
> > + };
> > +
> > + pmu {
> > + compatible = "arm,armv8-pmuv3";
> > + interrupts = <0 120 8>,
> > + <0 121 8>,
> > + <0 122 8>,
> > + <0 123 8>;
> > + interrupt-affinity = <&cpu0>,
> > + <&cpu1>,
> > + <&cpu2>,
> > + <&cpu3>;
> > + interrupt-parent = <&intc>;
> > + };
> > +
> > + psci {
> > + compatible = "arm,psci-0.2";
> > + method = "smc";
> > + };
> > +
> > + intc: intc at fffc1000 {
> > + compatible = "arm,gic-400", "arm,cortex-a15-gic";
> > + #interrupt-cells = <3>;
> > + interrupt-controller;
> > + reg = <0x0 0xfffc1000 0x0 0x1000>,
> > + <0x0 0xfffc2000 0x0 0x2000>,
> > + <0x0 0xfffc4000 0x0 0x2000>,
> > + <0x0 0xfffc6000 0x0 0x2000>;
> > + };
> > +
> > + soc {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + compatible = "simple-bus";
> > + device_type = "soc";
> > + interrupt-parent = <&intc>;
> > + ranges = <0 0 0 0xffffffff>;
> > +
> > + clkmgr: clock-controller at ffd10000 {
> > + compatible = "intel,agilex-clkmgr";
> > + reg = <0xffd10000 0x1000>;
> > + #clock-cells = <1>;
> > + };
> > +
> > + gmac0: ethernet at ff800000 {
> > + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
> > + reg = <0xff800000 0x2000>;
> > + interrupts = <0 90 4>;
> > + interrupt-names = "macirq";
> > + mac-address = [00 00 00 00 00 00];
> > + resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
> > + reset-names = "stmmaceth", "stmmaceth-ocp";
> > + clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
> > + clock-names = "stmmaceth";
> > + tx-fifo-depth = <16384>;
> > + rx-fifo-depth = <16384>;
> > + snps,multicast-filter-bins = <256>;
> > + iommus = <&smmu 1>;
> > + altr,sysmgr-syscon = <&sysmgr 0x44 0>;
> > + status = "disabled";
> > + };
> > +
> > + gmac1: ethernet at ff802000 {
> > + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
> > + reg = <0xff802000 0x2000>;
> > + interrupts = <0 91 4>;
> > + interrupt-names = "macirq";
> > + mac-address = [00 00 00 00 00 00];
> > + resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
> > + reset-names = "stmmaceth", "stmmaceth-ocp";
> > + clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
> > + clock-names = "stmmaceth";
> > + tx-fifo-depth = <16384>;
> > + rx-fifo-depth = <16384>;
> > + snps,multicast-filter-bins = <256>;
> > + iommus = <&smmu 2>;
> > + altr,sysmgr-syscon = <&sysmgr 0x48 0>;
> > + status = "disabled";
> > + };
> > +
> > + gmac2: ethernet at ff804000 {
> > + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
> > + reg = <0xff804000 0x2000>;
> > + interrupts = <0 92 4>;
> > + interrupt-names = "macirq";
> > + mac-address = [00 00 00 00 00 00];
> > + resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
> > + reset-names = "stmmaceth", "stmmaceth-ocp";
> > + clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
> > + clock-names = "stmmaceth";
> > + tx-fifo-depth = <16384>;
> > + rx-fifo-depth = <16384>;
> > + snps,multicast-filter-bins = <256>;
> > + iommus = <&smmu 3>;
> > + altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
> > + status = "disabled";
> > + };
> > +
> > + gpio0: gpio at ffc03200 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "snps,dw-apb-gpio";
> > + reg = <0xffc03200 0x100>;
> > + resets = <&rst GPIO0_RESET>;
> > + status = "disabled";
> > +
> > + porta: gpio-controller at 0 {
> > + compatible = "snps,dw-apb-gpio-port";
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + snps,nr-gpios = <24>;
> > + reg = <0>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + interrupts = <0 110 4>;
> > + };
> > + };
> > +
> > + gpio1: gpio at ffc03300 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "snps,dw-apb-gpio";
> > + reg = <0xffc03300 0x100>;
> > + resets = <&rst GPIO1_RESET>;
> > + status = "disabled";
> > +
> > + portb: gpio-controller at 0 {
> > + compatible = "snps,dw-apb-gpio-port";
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + snps,nr-gpios = <24>;
> > + reg = <0>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + interrupts = <0 111 4>;
> > + };
> > + };
> > +
> > + i2c0: i2c at ffc02800 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "snps,designware-i2c";
> > + reg = <0xffc02800 0x100>;
> > + interrupts = <0 103 4>;
> > + resets = <&rst I2C0_RESET>;
> > + reset-names = "i2c";
> > + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + i2c1: i2c at ffc02900 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "snps,designware-i2c";
> > + reg = <0xffc02900 0x100>;
> > + interrupts = <0 104 4>;
> > + resets = <&rst I2C1_RESET>;
> > + reset-names = "i2c";
> > + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + i2c2: i2c at ffc02a00 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "snps,designware-i2c";
> > + reg = <0xffc02a00 0x100>;
> > + interrupts = <0 105 4>;
> > + resets = <&rst I2C2_RESET>;
> > + reset-names = "i2c";
> > + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + i2c3: i2c at ffc02b00 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "snps,designware-i2c";
> > + reg = <0xffc02b00 0x100>;
> > + interrupts = <0 106 4>;
> > + resets = <&rst I2C3_RESET>;
> > + reset-names = "i2c";
> > + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + i2c4: i2c at ffc02c00 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "snps,designware-i2c";
> > + reg = <0xffc02c00 0x100>;
> > + interrupts = <0 107 4>;
> > + resets = <&rst I2C4_RESET>;
> > + reset-names = "i2c";
> > + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + mmc: dwmmc0 at ff808000 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "altr,socfpga-dw-mshc";
> > + reg = <0xff808000 0x1000>;
> > + interrupts = <0 96 4>;
> > + fifo-depth = <0x400>;
> > + resets = <&rst SDMMC_RESET>, <&rst SDMMC_OCP_RESET>;
> > + reset-names = "reset", "sdmmc-ocp";
> > + clocks = <&clkmgr STRATIX10_L4_MP_CLK>,
> > + <&clkmgr STRATIX10_SDMMC_CLK>;
> > + clock-names = "biu", "ciu";
> > + iommus = <&smmu 5>;
> > + status = "disabled";
> > + };
> > +
> > + ocram: sram at ffe00000 {
> > + compatible = "mmio-sram";
> > + reg = <0xffe00000 0x40000>;
> > + };
> > +
> > + pdma: pdma at ffda0000 {
> > + compatible = "arm,pl330", "arm,primecell";
> > + reg = <0xffda0000 0x1000>;
> > + interrupts = <0 81 4>,
> > + <0 82 4>,
> > + <0 83 4>,
> > + <0 84 4>,
> > + <0 85 4>,
> > + <0 86 4>,
> > + <0 87 4>,
> > + <0 88 4>,
> > + <0 89 4>;
> > + #dma-cells = <1>;
> > + #dma-channels = <8>;
> > + #dma-requests = <32>;
> > + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
> > + clock-names = "apb_pclk";
> > + };
> > +
> > + qspi: spi at ff8d2000 {
> > + compatible = "cdns,qspi-nor";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0xff8d2000 0x100>,
> > + <0xff900000 0x100000>;
> > + interrupts = <0 3 4>;
> > + cdns,fifo-depth = <128>;
> > + cdns,fifo-width = <4>;
> > + cdns,trigger-address = <0x00000000>;
> > + status = "disabled";
> > + };
> > +
> > + rst: rstmgr at ffd11000 {
> > + #reset-cells = <1>;
> > + compatible = "altr,rst-mgr";
> > + reg = <0xffd11000 0x100>;
> > + altr,modrst-offset = <0x20>;
> > + };
> > +
> > + smmu: iommu at fa000000 {
> > + compatible = "arm,mmu-500", "arm,smmu-v2";
> > + reg = <0xfa000000 0x40000>;
> > + #global-interrupts = <2>;
> > + #iommu-cells = <1>;
> > + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
> > + clock-names = "iommu";
> > + interrupt-parent = <&intc>;
> > + interrupts = <0 128 4>, /* Global Secure Fault */
> > + <0 129 4>, /* Global Non-secure Fault */
> > + /* Non-secure Context Interrupts (32) */
> > + <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
> > + <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
> > + <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
> > + <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
> > + <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
> > + <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
> > + <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
> > + <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
> > + stream-match-mask = <0x7ff0>;
> > + status = "disabled";
> > + };
> > +
> > + spi0: spi at ffda4000 {
> > + compatible = "snps,dw-apb-ssi";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0xffda4000 0x1000>;
> > + interrupts = <0 99 4>;
> > + resets = <&rst SPIM0_RESET>;
> > + reg-io-width = <4>;
> > + num-cs = <4>;
> > + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + spi1: spi at ffda5000 {
> > + compatible = "snps,dw-apb-ssi";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0xffda5000 0x1000>;
> > + interrupts = <0 100 4>;
> > + resets = <&rst SPIM1_RESET>;
> > + reg-io-width = <4>;
> > + num-cs = <4>;
> > + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + sysmgr: sysmgr at ffd12000 {
> > + compatible = "altr,sys-mgr", "syscon";
> > + reg = <0xffd12000 0x500>;
> > + };
> > +
> > + /* Local timer */
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupts = <1 13 0xf08>,
> > + <1 14 0xf08>,
> > + <1 11 0xf08>,
> > + <1 10 0xf08>;
> > + };
> > +
> > + timer0: timer0 at ffc03000 {
> > + compatible = "snps,dw-apb-timer";
> > + interrupts = <0 113 4>;
> > + reg = <0xffc03000 0x100>;
> > + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> > + clock-names = "timer";
> > + };
> > +
> > + timer1: timer1 at ffc03100 {
> > + compatible = "snps,dw-apb-timer";
> > + interrupts = <0 114 4>;
> > + reg = <0xffc03100 0x100>;
> > + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> > + clock-names = "timer";
> > + };
> > +
> > + timer2: timer2 at ffd00000 {
> > + compatible = "snps,dw-apb-timer";
> > + interrupts = <0 115 4>;
> > + reg = <0xffd00000 0x100>;
> > + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> > + clock-names = "timer";
> > + };
> > +
> > + timer3: timer3 at ffd00100 {
> > + compatible = "snps,dw-apb-timer";
> > + interrupts = <0 116 4>;
> > + reg = <0xffd00100 0x100>;
> > + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> > + clock-names = "timer";
> > + };
> > +
> > + uart0: serial0 at ffc02000 {
> > + compatible = "snps,dw-apb-uart";
> > + reg = <0xffc02000 0x100>;
> > + interrupts = <0 108 4>;
> > + reg-shift = <2>;
> > + reg-io-width = <4>;
> > + resets = <&rst UART0_RESET>;
> > + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + uart1: serial1 at ffc02100 {
> > + compatible = "snps,dw-apb-uart";
> > + reg = <0xffc02100 0x100>;
> > + interrupts = <0 109 4>;
> > + reg-shift = <2>;
> > + reg-io-width = <4>;
> > + resets = <&rst UART1_RESET>;
> > + clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + usbphy0: usbphy at 0 {
> > + #phy-cells = <0>;
> > + compatible = "usb-nop-xceiv";
> > + status = "okay";
> > + };
> > +
> > + usb0: usb at ffb00000 {
> > + compatible = "snps,dwc2";
> > + reg = <0xffb00000 0x40000>;
> > + interrupts = <0 93 4>;
> > + phys = <&usbphy0>;
> > + phy-names = "usb2-phy";
> > + resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
> > + reset-names = "dwc2", "dwc2-ecc";
> > + clocks = <&clkmgr STRATIX10_USB_CLK>;
> > + iommus = <&smmu 6>;
> > + status = "disabled";
> > + };
> > +
> > + usb1: usb at ffb40000 {
> > + compatible = "snps,dwc2";
> > + reg = <0xffb40000 0x40000>;
> > + interrupts = <0 94 4>;
> > + phys = <&usbphy0>;
> > + phy-names = "usb2-phy";
> > + resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
> > + reset-names = "dwc2", "dwc2-ecc";
> > + clocks = <&clkmgr STRATIX10_USB_CLK>;
> > + iommus = <&smmu 7>;
> > + status = "disabled";
> > + };
> > +
> > + watchdog0: watchdog at ffd00200 {
> > + compatible = "snps,dw-wdt";
> > + reg = <0xffd00200 0x100>;
> > + interrupts = <0 117 4>;
> > + resets = <&rst WATCHDOG0_RESET>;
> > + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + watchdog1: watchdog at ffd00300 {
> > + compatible = "snps,dw-wdt";
> > + reg = <0xffd00300 0x100>;
> > + interrupts = <0 118 4>;
> > + resets = <&rst WATCHDOG1_RESET>;
> > + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + watchdog2: watchdog at ffd00400 {
> > + compatible = "snps,dw-wdt";
> > + reg = <0xffd00400 0x100>;
> > + interrupts = <0 125 4>;
> > + resets = <&rst WATCHDOG2_RESET>;
> > + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + watchdog3: watchdog at ffd00500 {
> > + compatible = "snps,dw-wdt";
> > + reg = <0xffd00500 0x100>;
> > + interrupts = <0 126 4>;
> > + resets = <&rst WATCHDOG3_RESET>;
> > + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
> > + status = "disabled";
> > + };
> > +
> > + sdr: sdr at f8011100 {
> > + compatible = "altr,sdr-ctl", "syscon";
> > + reg = <0xf8011100 0xc0>;
> > + };
> > + };
> > +};
> > diff --git a/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi b/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi
> > new file mode 100644
> > index 0000000000..f66745f94d
> > --- /dev/null
> > +++ b/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi
> > @@ -0,0 +1,71 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * U-Boot additions
> > + *
> > + * Copyright (C) 2019 Intel Corporation <www.intel.com>
> > + */
> > +
> > +/{
> > + aliases {
> > + spi0 = &qspi;
> > + };
> > +
> > + memory {
> > + u-boot,dm-pre-reloc;
> > + };
> > +
> > + soc {
> > + u-boot,dm-pre-reloc;
> > + };
> > +};
> > +
> > +&clkmgr {
> > + u-boot,dm-pre-reloc;
> > +};
> > +
> > +&flash0 {
> > + compatible = "jedec,spi-nor";
> > + spi-max-frequency = <100000000>;
> > + spi-tx-bus-width = <4>;
> > + spi-rx-bus-width = <4>;
> > + u-boot,dm-pre-reloc;
> > +};
> > +
> > +&mmc {
> > + drvsel = <3>;
> > + smplsel = <0>;
> > + u-boot,dm-pre-reloc;
> > +};
> > +
> > +&porta {
> > + bank-name = "porta";
> > +};
> > +
> > +&portb {
> > + bank-name = "portb";
> > +};
> > +
> > +&qspi {
> > + u-boot,dm-pre-reloc;
> > +};
> > +
> > +&rst {
> > + u-boot,dm-pre-reloc;
> > +};
> > +
> > +&sdr {
> > + compatible = "altr,sdr-ctl-agilex";
> > + reg = <0xf8000400 0x80>,
> > + <0xf8010000 0x190>,
> > + <0xf8011000 0x500>;
> > + resets = <&rst DDRSCH_RESET>;
> > + u-boot,dm-pre-reloc;
> > +};
> > +
> > +&uart0 {
> > + u-boot,dm-pre-reloc;
> > +};
> > +
> > +&watchdog0 {
> > + u-boot,dm-pre-reloc;
> > +};
> > diff --git a/arch/arm/dts/socfpga_agilex_socdk.dts b/arch/arm/dts/socfpga_agilex_socdk.dts
> > new file mode 100644
> > index 0000000000..32ebc03478
> > --- /dev/null
> > +++ b/arch/arm/dts/socfpga_agilex_socdk.dts
> > @@ -0,0 +1,136 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2019 Intel Corporation
> > + */
> > +
> > +#include "socfpga_agilex.dtsi"
> > +
> > +/ {
> > + model = "SoCFPGA Agilex SoCDK";
> > +
> > + aliases {
> > + ethernet0 = &gmac0;
> > + i2c0 = &i2c1;
> > + serial0 = &uart0;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +
> > + leds {
> > + compatible = "gpio-leds";
> > + hps0 {
> > + label = "hps_led0";
> > + gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + hps1 {
> > + label = "hps_led1";
> > + gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + hps2 {
> > + label = "hps_led2";
> > + gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
> > + };
> > + };
> > +
> > + memory {
> > + device_type = "memory";
> > + /* 8GB */
> > + reg = <0 0x00000000 0 0x80000000>,
> > + <2 0x00000000 1 0x80000000>;
> > + };
> > +};
> > +
> > +&gpio1 {
> > + status = "okay";
> > +};
> > +
> > +&gmac0 {
> > + status = "okay";
> > + phy-mode = "rgmii";
> > + phy-handle = <&phy0>;
> > +
> > + max-frame-size = <3800>;
> > +
> > + mdio0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "snps,dwmac-mdio";
> > + phy0: ethernet-phy at 0 {
> > + reg = <4>;
> > +
> > + txd0-skew-ps = <0>; /* -420ps */
> > + txd1-skew-ps = <0>; /* -420ps */
> > + txd2-skew-ps = <0>; /* -420ps */
> > + txd3-skew-ps = <0>; /* -420ps */
> > + rxd0-skew-ps = <420>; /* 0ps */
> > + rxd1-skew-ps = <420>; /* 0ps */
> > + rxd2-skew-ps = <420>; /* 0ps */
> > + rxd3-skew-ps = <420>; /* 0ps */
> > + txen-skew-ps = <0>; /* -420ps */
> > + txc-skew-ps = <1860>; /* 960ps */
> > + rxdv-skew-ps = <420>; /* 0ps */
> > + rxc-skew-ps = <1680>; /* 780ps */
> > + };
> > + };
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > +};
> > +
> > +&mmc {
> > + status = "okay";
> > + cap-sd-highspeed;
> > + cap-mmc-highspeed;
> > + broken-cd;
> > + bus-width = <4>;
> > +};
> > +
> > +&qspi {
> > + status = "okay";
> > +
> > + flash0: flash at 0 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + compatible = "n25q00a";
>
> Why don't you change Linux dts to include both compatibles (i.e.
> "jedec,spi-nor" as generic fallback compatible)?
>
Yes, Linux can change to generic compatible string "jedec,spi-nor" .
Dinh, can you change this for Linux dts?
Thanks.
Ley Foon
>
> > + reg = <0>;
> > + spi-max-frequency = <50000000>;
> > +
> > + m25p,fast-read;
> > + cdns,page-size = <256>;
> > + cdns,block-size = <16>;
> > + cdns,read-delay = <1>;
> > + cdns,tshsl-ns = <50>;
> > + cdns,tsd2d-ns = <50>;
> > + cdns,tchsh-ns = <4>;
> > + cdns,tslch-ns = <4>;
> > +
> > + partitions {
> > + compatible = "fixed-partitions";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > +
> > + qspi_boot: partition at 0 {
> > + label = "Boot and fpga data";
> > + reg = <0x0 0x4000000>;
> > + };
> > +
> > + qspi_rootfs: partition at 4000000 {
> > + label = "Root Filesystem - JFFS2";
> > + reg = <0x4000000 0x4000000>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&uart0 {
> > + status = "okay";
> > +};
> > +
> > +&usb0 {
> > + status = "okay";
> > +};
> >
>
More information about the U-Boot
mailing list