[U-Boot] [PATCH 28/52] clk: imx: add i.MX8MM clk driver
peng.fan at nxp.com
peng.fan at nxp.com
Tue Jul 2 02:31:42 UTC 2019
From: Peng Fan <peng.fan at nxp.com>
Add i.MX8MM clk driver support.
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
arch/arm/mach-imx/imx8m/clock_imx8mm.c | 203 +++++++++++++++++----------------
drivers/clk/imx/Kconfig | 2 -
drivers/clk/imx/Makefile | 1 +
drivers/clk/imx/clk-imx8mm.c | 106 +++++++++++++++++
4 files changed, 211 insertions(+), 101 deletions(-)
create mode 100644 drivers/clk/imx/clk-imx8mm.c
diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
index 07399023d5..541561f276 100644
--- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c
+++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
@@ -119,6 +119,110 @@ void init_wdog_clk(void)
clock_enable(CCGR_WDOG3, 1);
}
+static int intpll_configure(enum pll_clocks pll, ulong freq)
+{
+ void __iomem *pll_gnrl_ctl, __iomem *pll_div_ctl;
+ u32 pll_div_ctl_val, pll_clke_masks;
+
+ switch (pll) {
+ case ANATOP_SYSTEM_PLL1:
+ pll_gnrl_ctl = &ana_pll->sys_pll1_gnrl_ctl;
+ pll_div_ctl = &ana_pll->sys_pll1_div_ctl;
+ pll_clke_masks = INTPLL_DIV20_CLKE_MASK |
+ INTPLL_DIV10_CLKE_MASK | INTPLL_DIV8_CLKE_MASK |
+ INTPLL_DIV6_CLKE_MASK | INTPLL_DIV5_CLKE_MASK |
+ INTPLL_DIV4_CLKE_MASK | INTPLL_DIV3_CLKE_MASK |
+ INTPLL_DIV2_CLKE_MASK | INTPLL_CLKE_MASK;
+ break;
+ case ANATOP_SYSTEM_PLL2:
+ pll_gnrl_ctl = &ana_pll->sys_pll2_gnrl_ctl;
+ pll_div_ctl = &ana_pll->sys_pll2_div_ctl;
+ pll_clke_masks = INTPLL_DIV20_CLKE_MASK |
+ INTPLL_DIV10_CLKE_MASK | INTPLL_DIV8_CLKE_MASK |
+ INTPLL_DIV6_CLKE_MASK | INTPLL_DIV5_CLKE_MASK |
+ INTPLL_DIV4_CLKE_MASK | INTPLL_DIV3_CLKE_MASK |
+ INTPLL_DIV2_CLKE_MASK | INTPLL_CLKE_MASK;
+ break;
+ case ANATOP_SYSTEM_PLL3:
+ pll_gnrl_ctl = &ana_pll->sys_pll3_gnrl_ctl;
+ pll_div_ctl = &ana_pll->sys_pll3_div_ctl;
+ pll_clke_masks = INTPLL_CLKE_MASK;
+ break;
+ case ANATOP_ARM_PLL:
+ pll_gnrl_ctl = &ana_pll->arm_pll_gnrl_ctl;
+ pll_div_ctl = &ana_pll->arm_pll_div_ctl;
+ pll_clke_masks = INTPLL_CLKE_MASK;
+ break;
+ case ANATOP_GPU_PLL:
+ pll_gnrl_ctl = &ana_pll->gpu_pll_gnrl_ctl;
+ pll_div_ctl = &ana_pll->gpu_pll_div_ctl;
+ pll_clke_masks = INTPLL_CLKE_MASK;
+ break;
+ case ANATOP_VPU_PLL:
+ pll_gnrl_ctl = &ana_pll->vpu_pll_gnrl_ctl;
+ pll_div_ctl = &ana_pll->vpu_pll_div_ctl;
+ pll_clke_masks = INTPLL_CLKE_MASK;
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ switch (freq) {
+ case MHZ(600):
+ /* 24 * 0x12c / 3 / 2 ^ 2 */
+ pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0x12c) |
+ INTPLL_PRE_DIV_VAL(3) | INTPLL_POST_DIV_VAL(2);
+ break;
+ case MHZ(750):
+ /* 24 * 0xfa / 2 / 2 ^ 2 */
+ pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0xfa) |
+ INTPLL_PRE_DIV_VAL(2) | INTPLL_POST_DIV_VAL(2);
+ break;
+ case MHZ(800):
+ /* 24 * 0x190 / 3 / 2 ^ 2 */
+ pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0x190) |
+ INTPLL_PRE_DIV_VAL(3) | INTPLL_POST_DIV_VAL(2);
+ break;
+ case MHZ(1000):
+ /* 24 * 0xfa / 3 / 2 ^ 1 */
+ pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0xfa) |
+ INTPLL_PRE_DIV_VAL(3) | INTPLL_POST_DIV_VAL(1);
+ break;
+ case MHZ(1200):
+ /* 24 * 0xc8 / 2 / 2 ^ 1 */
+ pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0xc8) |
+ INTPLL_PRE_DIV_VAL(2) | INTPLL_POST_DIV_VAL(1);
+ break;
+ case MHZ(2000):
+ /* 24 * 0xfa / 3 / 2 ^ 0 */
+ pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0xfa) |
+ INTPLL_PRE_DIV_VAL(3) | INTPLL_POST_DIV_VAL(0);
+ break;
+ default:
+ return -EINVAL;
+ };
+ /* Bypass clock and set lock to pll output lock */
+ setbits_le32(pll_gnrl_ctl, INTPLL_BYPASS_MASK |
+ INTPLL_LOCK_SEL_MASK);
+ /* Enable reset */
+ clrbits_le32(pll_gnrl_ctl, INTPLL_RST_MASK);
+ /* Configure */
+ writel(pll_div_ctl_val, pll_div_ctl);
+
+ __udelay(100);
+
+ /* Disable reset */
+ setbits_le32(pll_gnrl_ctl, INTPLL_RST_MASK);
+ /* Wait Lock */
+ while (!(readl(pll_gnrl_ctl) & INTPLL_LOCK_MASK))
+ ;
+ /* Clear bypass */
+ clrbits_le32(pll_gnrl_ctl, INTPLL_BYPASS_MASK);
+ setbits_le32(pll_gnrl_ctl, pll_clke_masks);
+
+ return 0;
+}
+
int clock_init(void)
{
u32 val_cfg0;
@@ -467,105 +571,6 @@ int fracpll_configure(enum pll_clocks pll, u32 freq)
return 0;
}
-int intpll_configure(enum pll_clocks pll, ulong freq)
-{
- void __iomem *pll_gnrl_ctl, __iomem *pll_div_ctl;
- u32 pll_div_ctl_val, pll_clke_masks;
-
- switch (pll) {
- case ANATOP_SYSTEM_PLL1:
- pll_gnrl_ctl = &ana_pll->sys_pll1_gnrl_ctl;
- pll_div_ctl = &ana_pll->sys_pll1_div_ctl;
- pll_clke_masks = INTPLL_DIV20_CLKE_MASK |
- INTPLL_DIV10_CLKE_MASK | INTPLL_DIV8_CLKE_MASK |
- INTPLL_DIV6_CLKE_MASK | INTPLL_DIV5_CLKE_MASK |
- INTPLL_DIV4_CLKE_MASK | INTPLL_DIV3_CLKE_MASK |
- INTPLL_DIV2_CLKE_MASK | INTPLL_CLKE_MASK;
- break;
- case ANATOP_SYSTEM_PLL2:
- pll_gnrl_ctl = &ana_pll->sys_pll2_gnrl_ctl;
- pll_div_ctl = &ana_pll->sys_pll2_div_ctl;
- pll_clke_masks = INTPLL_DIV20_CLKE_MASK |
- INTPLL_DIV10_CLKE_MASK | INTPLL_DIV8_CLKE_MASK |
- INTPLL_DIV6_CLKE_MASK | INTPLL_DIV5_CLKE_MASK |
- INTPLL_DIV4_CLKE_MASK | INTPLL_DIV3_CLKE_MASK |
- INTPLL_DIV2_CLKE_MASK | INTPLL_CLKE_MASK;
- break;
- case ANATOP_SYSTEM_PLL3:
- pll_gnrl_ctl = &ana_pll->sys_pll3_gnrl_ctl;
- pll_div_ctl = &ana_pll->sys_pll3_div_ctl;
- pll_clke_masks = INTPLL_CLKE_MASK;
- break;
- case ANATOP_ARM_PLL:
- pll_gnrl_ctl = &ana_pll->arm_pll_gnrl_ctl;
- pll_div_ctl = &ana_pll->arm_pll_div_ctl;
- pll_clke_masks = INTPLL_CLKE_MASK;
- break;
- case ANATOP_GPU_PLL:
- pll_gnrl_ctl = &ana_pll->gpu_pll_gnrl_ctl;
- pll_div_ctl = &ana_pll->gpu_pll_div_ctl;
- pll_clke_masks = INTPLL_CLKE_MASK;
- break;
- case ANATOP_VPU_PLL:
- pll_gnrl_ctl = &ana_pll->vpu_pll_gnrl_ctl;
- pll_div_ctl = &ana_pll->vpu_pll_div_ctl;
- pll_clke_masks = INTPLL_CLKE_MASK;
- break;
- default:
- return -EINVAL;
- };
-
- switch (freq) {
- case MHZ(750):
- /* 24 * 0xfa / 2 / 2 ^ 2 */
- pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0xfa) |
- INTPLL_PRE_DIV_VAL(2) | INTPLL_POST_DIV_VAL(2);
- break;
- case MHZ(800):
- /* 24 * 0x190 / 3 / 2 ^ 2 */
- pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0x190) |
- INTPLL_PRE_DIV_VAL(3) | INTPLL_POST_DIV_VAL(2);
- break;
- case MHZ(1000):
- /* 24 * 0xfa / 3 / 2 ^ 1 */
- pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0xfa) |
- INTPLL_PRE_DIV_VAL(3) | INTPLL_POST_DIV_VAL(1);
- break;
- case MHZ(1200):
- /* 24 * 0xc8 / 2 / 2 ^ 1 */
- pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0xc8) |
- INTPLL_PRE_DIV_VAL(2) | INTPLL_POST_DIV_VAL(1);
- break;
- case MHZ(2000):
- /* 24 * 0xfa / 3 / 2 ^ 0 */
- pll_div_ctl_val = INTPLL_MAIN_DIV_VAL(0xfa) |
- INTPLL_PRE_DIV_VAL(3) | INTPLL_POST_DIV_VAL(0);
- break;
- default:
- return -EINVAL;
- };
- /* Bypass clock and set lock to pll output lock */
- setbits_le32(pll_gnrl_ctl, INTPLL_BYPASS_MASK |
- INTPLL_LOCK_SEL_MASK);
- /* Enable reset */
- clrbits_le32(pll_gnrl_ctl, INTPLL_RST_MASK);
- /* Configure */
- writel(pll_div_ctl_val, pll_div_ctl);
-
- __udelay(100);
-
- /* Disable reset */
- setbits_le32(pll_gnrl_ctl, INTPLL_RST_MASK);
- /* Wait Lock */
- while (!(readl(pll_gnrl_ctl) & INTPLL_LOCK_MASK))
- ;
- /* Clear bypass */
- clrbits_le32(pll_gnrl_ctl, INTPLL_BYPASS_MASK);
- setbits_le32(pll_gnrl_ctl, pll_clke_masks);
-
- return 0;
-}
-
u32 get_root_src_clk(enum clk_root_src root_src)
{
switch (root_src) {
diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index e8f8b9461e..07ecad0a72 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -9,7 +9,5 @@ config CLK_IMX8MM
bool "Clock support for i.MX8MM"
depends on IMX8MM
select CLK
- select CLK_CCF
- select SPL_CLK_CCF
help
This enables support clock driver for i.MX8 platforms.
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index eb379c188a..b55566f2e9 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -8,3 +8,4 @@ ifdef CONFIG_CLK_IMX8
obj-$(CONFIG_IMX8QXP) += clk-imx8qxp.o
obj-$(CONFIG_IMX8QM) += clk-imx8qm.o
endif
+obj-$(CONFIG_CLK_IMX8MM) += clk-imx8mm.o
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
new file mode 100644
index 0000000000..1e0669494f
--- /dev/null
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP
+ * Peng Fan <peng.fan at nxp.com>
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <asm/arch/clock.h>
+#include <dt-bindings/clock/imx8mm-clock.h>
+
+static ulong imx8mm_clk_get_rate(struct clk *clk)
+{
+ debug("%s(#%lu)\n", __func__, clk->id);
+
+ switch (clk->id) {
+ case IMX8MM_CLK_USDHC1_ROOT:
+ return get_root_clk(USDHC1_CLK_ROOT);
+ case IMX8MM_CLK_USDHC2_ROOT:
+ return get_root_clk(USDHC2_CLK_ROOT);
+ case IMX8MM_CLK_USDHC3_ROOT:
+ return get_root_clk(USDHC3_CLK_ROOT);
+ case IMX8MM_CLK_I2C1:
+ return get_root_clk(I2C1_CLK_ROOT);
+ case IMX8MM_CLK_I2C2:
+ return get_root_clk(I2C2_CLK_ROOT);
+ case IMX8MM_CLK_I2C3:
+ return get_root_clk(I2C3_CLK_ROOT);
+ case IMX8MM_CLK_I2C4:
+ return get_root_clk(I2C4_CLK_ROOT);
+ }
+
+ return 0;
+}
+
+static int __imx8mm_clk_enable(struct clk *clk, bool enable)
+{
+ switch (clk->id) {
+ case IMX8MM_CLK_USDHC1_ROOT:
+ return clock_enable(CCGR_USDHC1, enable);
+ case IMX8MM_CLK_USDHC2_ROOT:
+ return clock_enable(CCGR_USDHC2, enable);
+ case IMX8MM_CLK_USDHC3_ROOT:
+ return clock_enable(CCGR_USDHC3, enable);
+ case IMX8MM_CLK_I2C1:
+ return clock_enable(CCGR_I2C1, enable);
+ case IMX8MM_CLK_I2C2:
+ return clock_enable(CCGR_I2C2, enable);
+ case IMX8MM_CLK_I2C3:
+ return clock_enable(CCGR_I2C3, enable);
+ case IMX8MM_CLK_I2C4:
+ return clock_enable(CCGR_I2C4, enable);
+ }
+
+ return -EINVAL;
+}
+
+static int imx8mm_clk_disable(struct clk *clk)
+{
+ debug("%s(#%lu)\n", __func__, clk->id);
+
+ return __imx8mm_clk_enable(clk, false);
+}
+
+static int imx8mm_clk_enable(struct clk *clk)
+{
+ debug("%s(#%lu)\n", __func__, clk->id);
+
+ return __imx8mm_clk_enable(clk, true);
+}
+
+static ulong imx8mm_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ debug("%s(#%lu)\n", __func__, clk->id);
+
+ /* TODO: */
+
+ return imx8mm_clk_get_rate(clk);
+}
+
+static struct clk_ops imx8mm_clk_ops = {
+ .set_rate = imx8mm_clk_set_rate,
+ .get_rate = imx8mm_clk_get_rate,
+ .enable = imx8mm_clk_enable,
+ .disable = imx8mm_clk_disable,
+};
+
+static int imx8mm_clk_probe(struct udevice *dev)
+{
+ return 0;
+}
+
+static const struct udevice_id imx8mm_clk_ids[] = {
+ { .compatible = "fsl,imx8mm-ccm" },
+ { },
+};
+
+U_BOOT_DRIVER(imx8mm_clk) = {
+ .name = "clk_imx8mm",
+ .id = UCLASS_CLK,
+ .of_match = imx8mm_clk_ids,
+ .ops = &imx8mm_clk_ops,
+ .probe = imx8mm_clk_probe,
+ .flags = DM_FLAG_PRE_RELOC,
+};
--
2.16.4
More information about the U-Boot
mailing list