[U-Boot] [PATCH v1 6/9] apalis-tk1: switch to zImage

[Oleksandr Suvorov]

On Wed, Jul 31, 2019 at 3:09 PM Igor Opaniuk <igor.opaniuk at gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk at toradex.com>
>
> Switch to the generic compressed Kernel image type (zImage) instead of
> the U-Boot specific uImage format.
>
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv at toradex.com>
> Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>

Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>

> ---
>
>  include/configs/apalis-tk1.h | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
> index 0bde1697bb..10f2948c62 100644
> --- a/include/configs/apalis-tk1.h
> +++ b/include/configs/apalis-tk1.h
> @@ -42,7 +42,7 @@
>  #define DFU_ALT_EMMC_INFO      "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
>                                 "boot part 0 1 mmcpart 0; " \
>                                 "rootfs part 0 2 mmcpart 0; " \
> -                               "uImage fat 0 1 mmcpart 0; " \
> +                               "zImage fat 0 1 mmcpart 0; " \
>                                 "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
>
>  #define EMMC_BOOTCMD \
> @@ -54,7 +54,7 @@
>                 "run emmcdtbload; " \
>                 "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
>                 "${boot_file} && run fdt_fixup && " \
> -               "bootm ${kernel_addr_r} - ${dtbparam}\0" \
> +               "bootz ${kernel_addr_r} - ${dtbparam}\0" \
>         "emmcbootpart=1\0" \
>         "emmcdev=0\0" \
>         "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
> @@ -68,7 +68,7 @@
>         "nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \
>                 "${setupargs} ${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
>                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
> -               "&& run fdt_fixup && bootm ${kernel_addr_r} - ${dtbparam}\0" \
> +               "&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \
>         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \
>                 "${soc}-apalis-${fdt_board}.dtb " \
>                 "&& setenv dtbparam ${fdt_addr_r}\0"
> @@ -81,7 +81,7 @@
>                 "${vidargs}; echo Booting from SD card in 8bit slot...; " \
>                 "run sddtbload; load mmc ${sddev}:${sdbootpart} " \
>                 "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
> -               "bootm ${kernel_addr_r} - ${dtbparam}\0" \
> +               "bootz ${kernel_addr_r} - ${dtbparam}\0" \
>         "sdbootpart=1\0" \
>         "sddev=1\0" \
>         "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
> @@ -98,7 +98,7 @@
>                 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
>                 "run usbdtbload; load usb ${usbdev}:${usbbootpart} " \
>                 "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
> -               "bootm ${kernel_addr_r} - ${dtbparam}\0" \
> +               "bootz ${kernel_addr_r} - ${dtbparam}\0" \
>         "usbbootpart=1\0" \
>         "usbdev=0\0" \
>         "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \
> @@ -108,7 +108,7 @@
>         "usbrootpart=2\0"
>
>  #define BOARD_EXTRA_ENV_SETTINGS \
> -       "boot_file=uImage\0" \
> +       "boot_file=zImage\0" \
>         "console=ttyS0\0" \
>         "defargs=lp0_vec=2064 at 0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
>                 "usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
> --
> 2.17.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot



-- 
Best regards

Oleksandr Suvorov
cryosay at gmail.com