[U-Boot] [PATCH 34/53] binman: Allow updating entries that change size

Simon Glass sjg at chromium.org
Sat Jul 20 18:23:56 UTC 2019


So far we don't allow entries to change size when repacking. But this is
not very useful since it is common for entries to change size after an
updated binary is built, etc.

Add support for this, respecting the original offset/size/alignment
constraints of the image layout. For this to work the original image
must have been created with the 'allow-repack' property.

This does not support entry types with sub-entries such as files and
CBFS, but it does support sections.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 tools/binman/README                      |  4 +-
 tools/binman/control.py                  | 29 ++++++++--
 tools/binman/etype/fdtmap.py             |  9 ++--
 tools/binman/ftest.py                    | 69 +++++++++++++++++++-----
 tools/binman/image.py                    |  3 +-
 tools/binman/state.py                    |  3 +-
 tools/binman/test/139_replace_repack.dts | 22 ++++++++
 7 files changed, 113 insertions(+), 26 deletions(-)
 create mode 100644 tools/binman/test/139_replace_repack.dts

diff --git a/tools/binman/README b/tools/binman/README
index 1f9e13784fc..af2a2314719 100644
--- a/tools/binman/README
+++ b/tools/binman/README
@@ -589,7 +589,9 @@ that there is an 'fdtmap' entry in the image. For example:
     $ binman replace -i image.bin section/cbfs/u-boot
 
 which will write the contents of the file 'u-boot' from the current directory
-to the that entry. The file must be the same size as the entry being replaced.
+to the that entry. If the entry size changes, you must add the 'allow-repack'
+property to the original image before generating it (see above), otherwise you
+will get an error.
 
 
 Logging
diff --git a/tools/binman/control.py b/tools/binman/control.py
index f9680e3948d..c3f358d45c4 100644
--- a/tools/binman/control.py
+++ b/tools/binman/control.py
@@ -118,11 +118,11 @@ def ReadEntry(image_fname, entry_path, decomp=True):
     return entry.ReadData(decomp)
 
 
-def WriteEntry(image_fname, entry_path, data, decomp=True):
+def WriteEntry(image_fname, entry_path, data, decomp=True, allow_resize=True):
     """Replace an entry in an image
 
     This replaces the data in a particular entry in an image. This size of the
-    new data must match the size of the old data
+    new data must match the size of the old data unless allow_resize is True.
 
     Args:
         image_fname: Image filename to process
@@ -130,18 +130,33 @@ def WriteEntry(image_fname, entry_path, data, decomp=True):
         data: Data to replace with
         decomp: True to compress the data if needed, False if data is
             already compressed so should be used as is
+        allow_resize: True to allow entries to change size (this does a re-pack
+            of the entries), False to raise an exception
+
+    Returns:
+        Image object that was updated
     """
     tout.Info("WriteEntry '%s', file '%s'" % (entry_path, image_fname))
     image = Image.FromFile(image_fname)
     entry = image.FindEntryPath(entry_path)
     state.PrepareFromLoadedData(image)
     image.LoadData()
+
+    # If repacking, drop the old offset/size values except for the original
+    # ones, so we are only left with the constraints.
+    if allow_resize:
+        image.ResetForPack()
     tout.Info('Writing data to %s' % entry.GetPath())
     if not entry.WriteData(data, decomp):
-        entry.Raise('Entry data size does not match, but resize is disabled')
+        if not image.allow_repack:
+            entry.Raise('Entry data size does not match, but allow-repack is not present for this image')
+        if not allow_resize:
+            entry.Raise('Entry data size does not match, but resize is disabled')
     tout.Info('Processing image')
-    ProcessImage(image, update_fdt=True, write_map=False, get_contents=False)
+    ProcessImage(image, update_fdt=True, write_map=False, get_contents=False,
+                 allow_resize=allow_resize)
     tout.Info('WriteEntry done')
+    return image
 
 
 def ExtractEntries(image_fname, output_fname, outdir, entry_paths,
@@ -264,7 +279,8 @@ def PrepareImagesAndDtbs(dtb_fname, select_images, update_fdt):
     return images
 
 
-def ProcessImage(image, update_fdt, write_map, get_contents=True):
+def ProcessImage(image, update_fdt, write_map, get_contents=True,
+                 allow_resize=True):
     """Perform all steps for this image, including checking and # writing it.
 
     This means that errors found with a later image will be reported after
@@ -277,6 +293,8 @@ def ProcessImage(image, update_fdt, write_map, get_contents=True):
         write_map: True to write a map file
         get_contents: True to get the image contents from files, etc., False if
             the contents is already present
+        allow_resize: True to allow entries to change size (this does a re-pack
+            of the entries), False to raise an exception
     """
     if get_contents:
         image.GetEntryContents()
@@ -309,6 +327,7 @@ def ProcessImage(image, update_fdt, write_map, get_contents=True):
             image.SetCalculatedProperties()
             for dtb_item in state.GetAllFdts():
                 dtb_item.Sync()
+                dtb_item.Flush()
         sizes_ok = image.ProcessEntryContents()
         if sizes_ok:
             break
diff --git a/tools/binman/etype/fdtmap.py b/tools/binman/etype/fdtmap.py
index ff3f1ae8129..b1810b9ddb1 100644
--- a/tools/binman/etype/fdtmap.py
+++ b/tools/binman/etype/fdtmap.py
@@ -96,10 +96,10 @@ class Entry_fdtmap(Entry):
                 with fsw.add_node(subnode.name):
                     _AddNode(subnode)
 
-        outfdt = self.GetImage().fdtmap_dtb
+        data = state.GetFdtContents('fdtmap')[1]
         # If we have an fdtmap it means that we are using this as the
-        # read-only fdtmap for this image.
-        if not outfdt:
+        # fdtmap for this image.
+        if data is None:
             # Get the FDT data into an Fdt object
             data = state.GetFdtContents()[1]
             infdt = Fdt.FromData(data)
@@ -126,7 +126,8 @@ class Entry_fdtmap(Entry):
             # Pack this new FDT and return its contents
             fdt.pack()
             outfdt = Fdt.FromData(fdt.as_bytearray())
-        data = FDTMAP_MAGIC + tools.GetBytes(0, 8) + outfdt.GetContents()
+            data = outfdt.GetContents()
+        data = FDTMAP_MAGIC + tools.GetBytes(0, 8) + data
         return data
 
     def ObtainContents(self):
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index bc751893edb..64c6c0abae1 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -2724,7 +2724,8 @@ class TestFunctional(unittest.TestCase):
         self.assertEqual(len(U_BOOT_DATA), entry.contents_size)
         self.assertEqual(len(U_BOOT_DATA), entry.size)
 
-    def _RunReplaceCmd(self, entry_name, data, decomp=True):
+    def _RunReplaceCmd(self, entry_name, data, decomp=True, allow_resize=True,
+                       dts='132_replace.dts'):
         """Replace an entry in an image
 
         This writes the entry data to update it, then opens the updated file and
@@ -2735,13 +2736,16 @@ class TestFunctional(unittest.TestCase):
             data: Data to replace it with
             decomp: True to compress the data if needed, False if data is
                 already compressed so should be used as is
+            allow_resize: True to allow entries to change size, False to raise
+                an exception
 
         Returns:
             Tuple:
                 data from entry
                 data from fdtmap (excluding header)
+                Image object that was modified
         """
-        dtb_data = self._DoReadFileDtb('132_replace.dts', use_real_dtb=True,
+        dtb_data = self._DoReadFileDtb(dts, use_real_dtb=True,
                                        update_dtb=True)[1]
 
         self.assertIn('image', control.images)
@@ -2753,21 +2757,24 @@ class TestFunctional(unittest.TestCase):
         image_fname = tools.GetOutputFilename('image.bin')
         updated_fname = tools.GetOutputFilename('image-updated.bin')
         tools.WriteFile(updated_fname, tools.ReadFile(image_fname))
-        control.WriteEntry(updated_fname, entry_name, data, decomp)
+        image = control.WriteEntry(updated_fname, entry_name, data, decomp,
+                                   allow_resize)
         data = control.ReadEntry(updated_fname, entry_name, decomp)
 
-        # The DT data should not change
-        new_dtb_data = entries['u-boot-dtb'].data
-        self.assertEqual(new_dtb_data, orig_dtb_data)
-        new_fdtmap_data = entries['fdtmap'].data
-        self.assertEqual(new_fdtmap_data, orig_fdtmap_data)
+        # The DT data should not change unless resized:
+        if not allow_resize:
+            new_dtb_data = entries['u-boot-dtb'].data
+            self.assertEqual(new_dtb_data, orig_dtb_data)
+            new_fdtmap_data = entries['fdtmap'].data
+            self.assertEqual(new_fdtmap_data, orig_fdtmap_data)
 
-        return data, orig_fdtmap_data[fdtmap.FDTMAP_HDR_LEN:]
+        return data, orig_fdtmap_data[fdtmap.FDTMAP_HDR_LEN:], image
 
     def testReplaceSimple(self):
         """Test replacing a single file"""
         expected = b'x' * len(U_BOOT_DATA)
-        data, expected_fdtmap = self._RunReplaceCmd('u-boot', expected)
+        data, expected_fdtmap, _ = self._RunReplaceCmd('u-boot', expected,
+                                                    allow_resize=False)
         self.assertEqual(expected, data)
 
         # Test that the state looks right. There should be an FDT for the fdtmap
@@ -2775,7 +2782,7 @@ class TestFunctional(unittest.TestCase):
         # 'control' tables. Checking for an FDT that does not exist should
         # return None.
         path, fdtmap = state.GetFdtContents('fdtmap')
-        self.assertIsNone(path)
+        self.assertIsNotNone(path)
         self.assertEqual(expected_fdtmap, fdtmap)
 
         dtb = state.GetFdtForEtype('fdtmap')
@@ -2794,7 +2801,8 @@ class TestFunctional(unittest.TestCase):
         """Test replacing a file by something larger"""
         expected = U_BOOT_DATA + b'x'
         with self.assertRaises(ValueError) as e:
-            self._RunReplaceCmd('u-boot', expected)
+            self._RunReplaceCmd('u-boot', expected, allow_resize=False,
+                                dts='139_replace_repack.dts')
         self.assertIn("Node '/u-boot': Entry data size does not match, but resize is disabled",
                       str(e.exception))
 
@@ -2806,7 +2814,8 @@ class TestFunctional(unittest.TestCase):
         updated_fname = tools.GetOutputFilename('image-updated.bin')
         tools.WriteFile(updated_fname, data)
         entry_name = 'u-boot'
-        control.WriteEntry(updated_fname, entry_name, expected)
+        control.WriteEntry(updated_fname, entry_name, expected,
+                           allow_resize=False)
         data = control.ReadEntry(updated_fname, entry_name)
         self.assertEqual(expected, data)
 
@@ -2818,7 +2827,8 @@ class TestFunctional(unittest.TestCase):
         updated_fname = tools.GetOutputFilename('first-updated.bin')
         tools.WriteFile(updated_fname, tools.ReadFile(image_fname))
         entry_name = 'u-boot'
-        control.WriteEntry(updated_fname, entry_name, expected)
+        control.WriteEntry(updated_fname, entry_name, expected,
+                           allow_resize=False)
         data = control.ReadEntry(updated_fname, entry_name)
         self.assertEqual(expected, data)
 
@@ -2911,6 +2921,37 @@ class TestFunctional(unittest.TestCase):
         """Test an image header at the end of an image with undefined size"""
         self._DoReadFileRealDtb('138_fdtmap_hdr_nosize.dts')
 
+    def testReplaceResize(self):
+        """Test replacing a single file in an entry with a larger file"""
+        expected = U_BOOT_DATA + b'x'
+        data, _, image = self._RunReplaceCmd('u-boot', expected,
+                                             dts='139_replace_repack.dts')
+        self.assertEqual(expected, data)
+
+        entries = image.GetEntries()
+        dtb_data = entries['u-boot-dtb'].data
+        dtb = fdt.Fdt.FromData(dtb_data)
+        dtb.Scan()
+
+        # The u-boot section should now be larger in the dtb
+        node = dtb.GetNode('/binman/u-boot')
+        self.assertEqual(len(expected), fdt_util.GetInt(node, 'size'))
+
+        # Same for the fdtmap
+        fdata = entries['fdtmap'].data
+        fdtb = fdt.Fdt.FromData(fdata[fdtmap.FDTMAP_HDR_LEN:])
+        fdtb.Scan()
+        fnode = fdtb.GetNode('/u-boot')
+        self.assertEqual(len(expected), fdt_util.GetInt(fnode, 'size'))
+
+    def testReplaceResizeNoRepack(self):
+        """Test replacing an entry with a larger file when not allowed"""
+        expected = U_BOOT_DATA + b'x'
+        with self.assertRaises(ValueError) as e:
+            self._RunReplaceCmd('u-boot', expected)
+        self.assertIn('Entry data size does not match, but allow-repack is not present for this image',
+                      str(e.exception))
+
 
 if __name__ == "__main__":
     unittest.main()
diff --git a/tools/binman/image.py b/tools/binman/image.py
index fd4f5044929..7b39a1ddcec 100644
--- a/tools/binman/image.py
+++ b/tools/binman/image.py
@@ -97,12 +97,13 @@ class Image(section.Entry_section):
         fdt_data = fdtmap_data[fdtmap.FDTMAP_HDR_LEN:]
         out_fname = tools.GetOutputFilename('fdtmap.in.dtb')
         tools.WriteFile(out_fname, fdt_data)
-        dtb = fdt.Fdt.FromData(fdt_data, out_fname)
+        dtb = fdt.Fdt(out_fname)
         dtb.Scan()
 
         # Return an Image with the associated nodes
         root = dtb.GetRoot()
         image = Image('image', root, copy_to_orig=False)
+
         image.image_node = fdt_util.GetString(root, 'image-node', 'image')
         image.fdtmap_dtb = dtb
         image.fdtmap_data = fdtmap_data
diff --git a/tools/binman/state.py b/tools/binman/state.py
index 2379e24ef6d..65536151b44 100644
--- a/tools/binman/state.py
+++ b/tools/binman/state.py
@@ -249,6 +249,7 @@ def GetUpdateNodes(node, for_repack=False):
             if for_repack and entry.etype != 'u-boot-dtb':
                 continue
             other_node = dtb.GetNode(fdt_path_prefix + node.path)
+            #print('   try', fdt_path_prefix + node.path, other_node)
             if other_node:
                 yield other_node
 
@@ -300,7 +301,7 @@ def SetInt(node, prop, value, for_repack=False):
     """
     for n in GetUpdateNodes(node, for_repack):
         tout.Detail("File %s: Update node '%s' prop '%s' to %#x" %
-                    (node.GetFdt().name, node.path, prop, value))
+                    (n.GetFdt().name, n.path, prop, value))
         n.SetInt(prop, value)
 
 def CheckAddHashProp(node):
diff --git a/tools/binman/test/139_replace_repack.dts b/tools/binman/test/139_replace_repack.dts
new file mode 100644
index 00000000000..a3daf6f9b46
--- /dev/null
+++ b/tools/binman/test/139_replace_repack.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	binman {
+		size = <0xc00>;
+		allow-repack;
+		u-boot {
+		};
+		fdtmap {
+		};
+		u-boot-dtb {
+		};
+		image-header {
+			location = "end";
+		};
+	};
+};
-- 
2.22.0.657.g960e92d24f-goog



More information about the U-Boot mailing list