[U-Boot] [PATCH 13/18] ARM: uniphier: de-couple SC macros into base address and offset
Masahiro Yamada
yamada.masahiro at socionext.com
Tue Jul 2 08:32:23 UTC 2019
The SC_* macros represent the address of SysCtrl registers.
For a planned new SoC, its base address will be changed.
Turn the SC_* macros into the offset from the base address.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
arch/arm/mach-uniphier/arm32/debug_ll.S | 8 +-
arch/arm/mach-uniphier/clk/clk-dram-ld4.c | 12 +--
arch/arm/mach-uniphier/clk/clk-dram-pro5.c | 12 +--
arch/arm/mach-uniphier/clk/clk-dram-pxs2.c | 12 +--
arch/arm/mach-uniphier/clk/clk-early-ld4.c | 10 +--
arch/arm/mach-uniphier/clk/clk-ld20.c | 8 +-
arch/arm/mach-uniphier/clk/clk-ld4.c | 12 +--
arch/arm/mach-uniphier/clk/clk-pro4.c | 18 ++--
arch/arm/mach-uniphier/clk/clk-pro5.c | 18 ++--
arch/arm/mach-uniphier/clk/clk-pxs2.c | 22 ++---
arch/arm/mach-uniphier/clk/clk-pxs3.c | 8 +-
arch/arm/mach-uniphier/clk/dpll-ld4.c | 8 +-
arch/arm/mach-uniphier/clk/dpll-pro4.c | 8 +-
arch/arm/mach-uniphier/clk/dpll-sld8.c | 12 +--
arch/arm/mach-uniphier/clk/dpll-tail.c | 4 +-
arch/arm/mach-uniphier/clk/pll-base-ld20.c | 41 ++--------
arch/arm/mach-uniphier/clk/pll-ld11.c | 18 ++--
arch/arm/mach-uniphier/clk/pll-ld20.c | 26 +++---
arch/arm/mach-uniphier/clk/pll-ld4.c | 82 +++++++++----------
arch/arm/mach-uniphier/clk/pll-pro4.c | 64 +++++++--------
arch/arm/mach-uniphier/clk/pll-pxs3.c | 30 +++----
.../debug-uart/debug-uart-ld6b.c | 4 +-
.../debug-uart/debug-uart-pro4.c | 4 +-
.../debug-uart/debug-uart-pro5.c | 4 +-
.../debug-uart/debug-uart-pxs2.c | 4 +-
arch/arm/mach-uniphier/reset.c | 10 +--
arch/arm/mach-uniphier/sc-regs.h | 49 ++++++-----
arch/arm/mach-uniphier/sc64-regs.h | 43 +++++-----
28 files changed, 266 insertions(+), 285 deletions(-)
diff --git a/arch/arm/mach-uniphier/arm32/debug_ll.S b/arch/arm/mach-uniphier/arm32/debug_ll.S
index c155246ae8c9..3fed7985fcd6 100644
--- a/arch/arm/mach-uniphier/arm32/debug_ll.S
+++ b/arch/arm/mach-uniphier/arm32/debug_ll.S
@@ -63,7 +63,7 @@ ld4_end:
mov r1, #1
str r1, [r0]
- ldr r0, =SC_CLKCTRL
+ ldr r0, =(SC_BASE + SC_CLKCTRL)
ldr r1, [r0]
orr r1, r1, #SC_CLKCTRL_CEN_PERI
str r1, [r0]
@@ -104,7 +104,7 @@ sld8_end:
mov r1, #1
str r1, [r0]
- ldr r0, =SC_CLKCTRL
+ ldr r0, =(SC_BASE + SC_CLKCTRL)
ldr r1, [r0]
orr r1, r1, #SC_CLKCTRL_CEN_PERI
str r1, [r0]
@@ -129,7 +129,7 @@ pro5_end:
sg_set_pinsel 113, 8, 8, 4, r0, r1 @ TXD2 -> TXD2
sg_set_pinsel 219, 8, 8, 4, r0, r1 @ TXD3 -> TXD3
- ldr r0, =SC_CLKCTRL
+ ldr r0, =(SC_BASE + SC_CLKCTRL)
ldr r1, [r0]
orr r1, r1, #SC_CLKCTRL_CEN_PERI
str r1, [r0]
@@ -153,7 +153,7 @@ pxs2_end:
sg_set_pinsel 115, 0, 8, 4, r0, r1 @ TXD1 -> TXD1
sg_set_pinsel 113, 2, 8, 4, r0, r1 @ SBO0 -> TXD2
- ldr r0, =SC_CLKCTRL
+ ldr r0, =(SC_BASE + SC_CLKCTRL)
ldr r1, [r0]
orr r1, r1, #SC_CLKCTRL_CEN_PERI
str r1, [r0]
diff --git a/arch/arm/mach-uniphier/clk/clk-dram-ld4.c b/arch/arm/mach-uniphier/clk/clk-dram-ld4.c
index 39cde4400b4e..c796d364bb16 100644
--- a/arch/arm/mach-uniphier/clk/clk-dram-ld4.c
+++ b/arch/arm/mach-uniphier/clk/clk-dram-ld4.c
@@ -16,14 +16,14 @@ void uniphier_ld4_dram_clk_init(void)
u32 tmp;
/* deassert reset */
- tmp = readl(SC_RSTCTRL);
+ tmp = readl(sc_base + SC_RSTCTRL);
tmp |= SC_RSTCTRL_NRST_UMC1 | SC_RSTCTRL_NRST_UMC0;
- writel(tmp, SC_RSTCTRL);
- readl(SC_RSTCTRL); /* dummy read */
+ writel(tmp, sc_base + SC_RSTCTRL);
+ readl(sc_base + SC_RSTCTRL); /* dummy read */
/* provide clocks */
- tmp = readl(SC_CLKCTRL);
+ tmp = readl(sc_base + SC_CLKCTRL);
tmp |= SC_CLKCTRL_CEN_UMC;
- writel(tmp, SC_CLKCTRL);
- readl(SC_CLKCTRL); /* dummy read */
+ writel(tmp, sc_base + SC_CLKCTRL);
+ readl(sc_base + SC_CLKCTRL); /* dummy read */
}
diff --git a/arch/arm/mach-uniphier/clk/clk-dram-pro5.c b/arch/arm/mach-uniphier/clk/clk-dram-pro5.c
index 7674ceb885fa..808d1ebfe190 100644
--- a/arch/arm/mach-uniphier/clk/clk-dram-pro5.c
+++ b/arch/arm/mach-uniphier/clk/clk-dram-pro5.c
@@ -18,17 +18,17 @@ void uniphier_pro5_dram_clk_init(void)
* UMCA1, UMC31: Ch0 (WIO1)
* UMCA0, UMC30: Ch0 (WIO0)
*/
- tmp = readl(SC_RSTCTRL4);
+ tmp = readl(sc_base + SC_RSTCTRL4);
tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 |
SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 |
SC_RSTCTRL4_NRST_UMC31 | SC_RSTCTRL4_NRST_UMC30;
- writel(tmp, SC_RSTCTRL4);
- readl(SC_RSTCTRL4); /* dummy read */
+ writel(tmp, sc_base + SC_RSTCTRL4);
+ readl(sc_base + SC_RSTCTRL4); /* dummy read */
/* provide clocks */
- tmp = readl(SC_CLKCTRL4);
+ tmp = readl(sc_base + SC_CLKCTRL4);
tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC1 |
SC_CLKCTRL4_CEN_UMC0;
- writel(tmp, SC_CLKCTRL4);
- readl(SC_CLKCTRL4); /* dummy read */
+ writel(tmp, sc_base + SC_CLKCTRL4);
+ readl(sc_base + SC_CLKCTRL4); /* dummy read */
}
diff --git a/arch/arm/mach-uniphier/clk/clk-dram-pxs2.c b/arch/arm/mach-uniphier/clk/clk-dram-pxs2.c
index ad4e83a84a2e..b78bd0167218 100644
--- a/arch/arm/mach-uniphier/clk/clk-dram-pxs2.c
+++ b/arch/arm/mach-uniphier/clk/clk-dram-pxs2.c
@@ -15,18 +15,18 @@ void uniphier_pxs2_dram_clk_init(void)
u32 tmp;
/* deassert reset */
- tmp = readl(SC_RSTCTRL4);
+ tmp = readl(sc_base + SC_RSTCTRL4);
tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 |
SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 |
SC_RSTCTRL4_NRST_UMC32 | SC_RSTCTRL4_NRST_UMC31 |
SC_RSTCTRL4_NRST_UMC30;
- writel(tmp, SC_RSTCTRL4);
- readl(SC_RSTCTRL4); /* dummy read */
+ writel(tmp, sc_base + SC_RSTCTRL4);
+ readl(sc_base + SC_RSTCTRL4); /* dummy read */
/* provide clocks */
- tmp = readl(SC_CLKCTRL4);
+ tmp = readl(sc_base + SC_CLKCTRL4);
tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC2 |
SC_CLKCTRL4_CEN_UMC1 | SC_CLKCTRL4_CEN_UMC0;
- writel(tmp, SC_CLKCTRL4);
- readl(SC_CLKCTRL4); /* dummy read */
+ writel(tmp, sc_base + SC_CLKCTRL4);
+ readl(sc_base + SC_CLKCTRL4); /* dummy read */
}
diff --git a/arch/arm/mach-uniphier/clk/clk-early-ld4.c b/arch/arm/mach-uniphier/clk/clk-early-ld4.c
index eb36a9e7ae45..f32f78dd26d8 100644
--- a/arch/arm/mach-uniphier/clk/clk-early-ld4.c
+++ b/arch/arm/mach-uniphier/clk/clk-early-ld4.c
@@ -17,14 +17,14 @@ void uniphier_ld4_early_clk_init(void)
/* deassert reset */
if (spl_boot_device() != BOOT_DEVICE_NAND) {
- tmp = readl(SC_RSTCTRL);
+ tmp = readl(sc_base + SC_RSTCTRL);
tmp &= ~SC_RSTCTRL_NRST_NAND;
- writel(tmp, SC_RSTCTRL);
+ writel(tmp, sc_base + SC_RSTCTRL);
};
/* provide clocks */
- tmp = readl(SC_CLKCTRL);
+ tmp = readl(sc_base + SC_CLKCTRL);
tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI;
- writel(tmp, SC_CLKCTRL);
- readl(SC_CLKCTRL); /* dummy read */
+ writel(tmp, sc_base + SC_CLKCTRL);
+ readl(sc_base + SC_CLKCTRL); /* dummy read */
}
diff --git a/arch/arm/mach-uniphier/clk/clk-ld20.c b/arch/arm/mach-uniphier/clk/clk-ld20.c
index 02a14ddfb8bc..397b2d7384fd 100644
--- a/arch/arm/mach-uniphier/clk/clk-ld20.c
+++ b/arch/arm/mach-uniphier/clk/clk-ld20.c
@@ -15,13 +15,13 @@ void uniphier_ld20_clk_init(void)
{
u32 tmp;
- tmp = readl(SC_RSTCTRL6);
+ tmp = readl(sc_base + SC_RSTCTRL6);
tmp |= BIT(8); /* Mali */
- writel(tmp, SC_RSTCTRL6);
+ writel(tmp, sc_base + SC_RSTCTRL6);
- tmp = readl(SC_CLKCTRL6);
+ tmp = readl(sc_base + SC_CLKCTRL6);
tmp |= BIT(8); /* Mali */
- writel(tmp, SC_CLKCTRL6);
+ writel(tmp, sc_base + SC_CLKCTRL6);
/* TODO: use "mmc-pwrseq-emmc" */
writel(1, SDCTRL_EMMC_HW_RESET);
diff --git a/arch/arm/mach-uniphier/clk/clk-ld4.c b/arch/arm/mach-uniphier/clk/clk-ld4.c
index 9c88cde5e257..039394250396 100644
--- a/arch/arm/mach-uniphier/clk/clk-ld4.c
+++ b/arch/arm/mach-uniphier/clk/clk-ld4.c
@@ -15,18 +15,18 @@ void uniphier_ld4_clk_init(void)
u32 tmp;
/* deassert reset */
- tmp = readl(SC_RSTCTRL);
+ tmp = readl(sc_base + SC_RSTCTRL);
#ifdef CONFIG_NAND_DENALI
tmp |= SC_RSTCTRL_NRST_NAND;
#endif
- writel(tmp, SC_RSTCTRL);
- readl(SC_RSTCTRL); /* dummy read */
+ writel(tmp, sc_base + SC_RSTCTRL);
+ readl(sc_base + SC_RSTCTRL); /* dummy read */
/* provide clocks */
- tmp = readl(SC_CLKCTRL);
+ tmp = readl(sc_base + SC_CLKCTRL);
#ifdef CONFIG_NAND_DENALI
tmp |= SC_CLKCTRL_CEN_NAND;
#endif
- writel(tmp, SC_CLKCTRL);
- readl(SC_CLKCTRL); /* dummy read */
+ writel(tmp, sc_base + SC_CLKCTRL);
+ readl(sc_base + SC_CLKCTRL); /* dummy read */
}
diff --git a/arch/arm/mach-uniphier/clk/clk-pro4.c b/arch/arm/mach-uniphier/clk/clk-pro4.c
index 32d44c0b6677..2b364dca4100 100644
--- a/arch/arm/mach-uniphier/clk/clk-pro4.c
+++ b/arch/arm/mach-uniphier/clk/clk-pro4.c
@@ -15,7 +15,7 @@ void uniphier_pro4_clk_init(void)
u32 tmp;
/* deassert reset */
- tmp = readl(SC_RSTCTRL);
+ tmp = readl(sc_base + SC_RSTCTRL);
#ifdef CONFIG_USB_DWC3_UNIPHIER
tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_USB3C0 |
SC_RSTCTRL_NRST_GIO;
@@ -23,18 +23,18 @@ void uniphier_pro4_clk_init(void)
#ifdef CONFIG_NAND_DENALI
tmp |= SC_RSTCTRL_NRST_NAND;
#endif
- writel(tmp, SC_RSTCTRL);
- readl(SC_RSTCTRL); /* dummy read */
+ writel(tmp, sc_base + SC_RSTCTRL);
+ readl(sc_base + SC_RSTCTRL); /* dummy read */
#ifdef CONFIG_USB_DWC3_UNIPHIER
- tmp = readl(SC_RSTCTRL2);
+ tmp = readl(sc_base + SC_RSTCTRL2);
tmp |= SC_RSTCTRL2_NRST_USB3B1 | SC_RSTCTRL2_NRST_USB3C1;
- writel(tmp, SC_RSTCTRL2);
- readl(SC_RSTCTRL2); /* dummy read */
+ writel(tmp, sc_base + SC_RSTCTRL2);
+ readl(sc_base + SC_RSTCTRL2); /* dummy read */
#endif
/* provide clocks */
- tmp = readl(SC_CLKCTRL);
+ tmp = readl(sc_base + SC_CLKCTRL);
#ifdef CONFIG_USB_DWC3_UNIPHIER
tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
SC_CLKCTRL_CEN_GIO;
@@ -42,6 +42,6 @@ void uniphier_pro4_clk_init(void)
#ifdef CONFIG_NAND_DENALI
tmp |= SC_CLKCTRL_CEN_NAND;
#endif
- writel(tmp, SC_CLKCTRL);
- readl(SC_CLKCTRL); /* dummy read */
+ writel(tmp, sc_base + SC_CLKCTRL);
+ readl(sc_base + SC_CLKCTRL); /* dummy read */
}
diff --git a/arch/arm/mach-uniphier/clk/clk-pro5.c b/arch/arm/mach-uniphier/clk/clk-pro5.c
index 338d73d07085..874964b2d5bc 100644
--- a/arch/arm/mach-uniphier/clk/clk-pro5.c
+++ b/arch/arm/mach-uniphier/clk/clk-pro5.c
@@ -13,25 +13,25 @@ void uniphier_pro5_clk_init(void)
u32 tmp;
/* deassert reset */
- tmp = readl(SC_RSTCTRL);
+ tmp = readl(sc_base + SC_RSTCTRL);
#ifdef CONFIG_USB_DWC3_UNIPHIER
tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO;
#endif
#ifdef CONFIG_NAND_DENALI
tmp |= SC_RSTCTRL_NRST_NAND;
#endif
- writel(tmp, SC_RSTCTRL);
- readl(SC_RSTCTRL); /* dummy read */
+ writel(tmp, sc_base + SC_RSTCTRL);
+ readl(sc_base + SC_RSTCTRL); /* dummy read */
#ifdef CONFIG_USB_DWC3_UNIPHIER
- tmp = readl(SC_RSTCTRL2);
+ tmp = readl(sc_base + SC_RSTCTRL2);
tmp |= SC_RSTCTRL2_NRST_USB3B1;
- writel(tmp, SC_RSTCTRL2);
- readl(SC_RSTCTRL2); /* dummy read */
+ writel(tmp, sc_base + SC_RSTCTRL2);
+ readl(sc_base + SC_RSTCTRL2); /* dummy read */
#endif
/* provide clocks */
- tmp = readl(SC_CLKCTRL);
+ tmp = readl(sc_base + SC_CLKCTRL);
#ifdef CONFIG_USB_DWC3_UNIPHIER
tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
SC_CLKCTRL_CEN_GIO;
@@ -39,6 +39,6 @@ void uniphier_pro5_clk_init(void)
#ifdef CONFIG_NAND_DENALI
tmp |= SC_CLKCTRL_CEN_NAND;
#endif
- writel(tmp, SC_CLKCTRL);
- readl(SC_CLKCTRL); /* dummy read */
+ writel(tmp, sc_base + SC_CLKCTRL);
+ readl(sc_base + SC_CLKCTRL); /* dummy read */
}
diff --git a/arch/arm/mach-uniphier/clk/clk-pxs2.c b/arch/arm/mach-uniphier/clk/clk-pxs2.c
index afa12fa071e7..8cb4f87ae54b 100644
--- a/arch/arm/mach-uniphier/clk/clk-pxs2.c
+++ b/arch/arm/mach-uniphier/clk/clk-pxs2.c
@@ -14,29 +14,29 @@ void uniphier_pxs2_clk_init(void)
u32 tmp;
/* deassert reset */
- tmp = readl(SC_RSTCTRL);
+ tmp = readl(sc_base + SC_RSTCTRL);
#ifdef CONFIG_USB_DWC3_UNIPHIER
tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO;
#endif
#ifdef CONFIG_NAND_DENALI
tmp |= SC_RSTCTRL_NRST_NAND;
#endif
- writel(tmp, SC_RSTCTRL);
- readl(SC_RSTCTRL); /* dummy read */
+ writel(tmp, sc_base + SC_RSTCTRL);
+ readl(sc_base + SC_RSTCTRL); /* dummy read */
#ifdef CONFIG_USB_DWC3_UNIPHIER
- tmp = readl(SC_RSTCTRL2);
+ tmp = readl(sc_base + SC_RSTCTRL2);
tmp |= SC_RSTCTRL2_NRST_USB3B1;
- writel(tmp, SC_RSTCTRL2);
- readl(SC_RSTCTRL2); /* dummy read */
+ writel(tmp, sc_base + SC_RSTCTRL2);
+ readl(sc_base + SC_RSTCTRL2); /* dummy read */
- tmp = readl(SC_RSTCTRL6);
+ tmp = readl(sc_base + SC_RSTCTRL6);
tmp |= 0x37;
- writel(tmp, SC_RSTCTRL6);
+ writel(tmp, sc_base + SC_RSTCTRL6);
#endif
/* provide clocks */
- tmp = readl(SC_CLKCTRL);
+ tmp = readl(sc_base + SC_CLKCTRL);
#ifdef CONFIG_USB_DWC3_UNIPHIER
tmp |= BIT(20) | BIT(19) | SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
SC_CLKCTRL_CEN_GIO;
@@ -44,6 +44,6 @@ void uniphier_pxs2_clk_init(void)
#ifdef CONFIG_NAND_DENALI
tmp |= SC_CLKCTRL_CEN_NAND;
#endif
- writel(tmp, SC_CLKCTRL);
- readl(SC_CLKCTRL); /* dummy read */
+ writel(tmp, sc_base + SC_CLKCTRL);
+ readl(sc_base + SC_CLKCTRL); /* dummy read */
}
diff --git a/arch/arm/mach-uniphier/clk/clk-pxs3.c b/arch/arm/mach-uniphier/clk/clk-pxs3.c
index 73824e9ace63..33b9c5b73d1b 100644
--- a/arch/arm/mach-uniphier/clk/clk-pxs3.c
+++ b/arch/arm/mach-uniphier/clk/clk-pxs3.c
@@ -15,13 +15,13 @@ void uniphier_pxs3_clk_init(void)
{
u32 tmp;
- tmp = readl(SC_RSTCTRL6);
+ tmp = readl(sc_base + SC_RSTCTRL6);
tmp |= BIT(8); /* Mali */
- writel(tmp, SC_RSTCTRL6);
+ writel(tmp, sc_base + SC_RSTCTRL6);
- tmp = readl(SC_CLKCTRL6);
+ tmp = readl(sc_base + SC_CLKCTRL6);
tmp |= BIT(8); /* Mali */
- writel(tmp, SC_CLKCTRL6);
+ writel(tmp, sc_base + SC_CLKCTRL6);
/* TODO: use "mmc-pwrseq-emmc" */
writel(1, SDCTRL_EMMC_HW_RESET);
diff --git a/arch/arm/mach-uniphier/clk/dpll-ld4.c b/arch/arm/mach-uniphier/clk/dpll-ld4.c
index 4b9ec075a848..72fe8db8dd1d 100644
--- a/arch/arm/mach-uniphier/clk/dpll-ld4.c
+++ b/arch/arm/mach-uniphier/clk/dpll-ld4.c
@@ -23,7 +23,7 @@ int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd)
* Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
* to FOUT (DPLLCTRL.bit[29:20])
*/
- tmp = readl(SC_DPLLCTRL);
+ tmp = readl(sc_base + SC_DPLLCTRL);
tmp &= ~0x000f0000;
switch (dram_freq) {
case 1333:
@@ -42,11 +42,11 @@ int uniphier_ld4_dpll_init(const struct uniphier_board_data *bd)
#else
tmp |= SC_DPLLCTRL_SSC_RATE;
#endif
- writel(tmp, SC_DPLLCTRL);
+ writel(tmp, sc_base + SC_DPLLCTRL);
- tmp = readl(SC_DPLLCTRL2);
+ tmp = readl(sc_base + SC_DPLLCTRL2);
tmp |= SC_DPLLCTRL2_NRSTDS;
- writel(tmp, SC_DPLLCTRL2);
+ writel(tmp, sc_base + SC_DPLLCTRL2);
/* Wait 500 usec until dpll gets stable */
udelay(500);
diff --git a/arch/arm/mach-uniphier/clk/dpll-pro4.c b/arch/arm/mach-uniphier/clk/dpll-pro4.c
index 29659464b57c..62594954848c 100644
--- a/arch/arm/mach-uniphier/clk/dpll-pro4.c
+++ b/arch/arm/mach-uniphier/clk/dpll-pro4.c
@@ -23,7 +23,7 @@ int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd)
* Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
* to FOUT ( DPLLCTRL.bit[29:20] )
*/
- tmp = readl(SC_DPLLCTRL);
+ tmp = readl(sc_base + SC_DPLLCTRL);
tmp &= ~(0x000f0000);
switch (dram_freq) {
case 1333:
@@ -46,11 +46,11 @@ int uniphier_pro4_dpll_init(const struct uniphier_board_data *bd)
#else
tmp |= 0x00008000;
#endif
- writel(tmp, SC_DPLLCTRL);
+ writel(tmp, sc_base + SC_DPLLCTRL);
- tmp = readl(SC_DPLLCTRL2);
+ tmp = readl(sc_base + SC_DPLLCTRL2);
tmp |= SC_DPLLCTRL2_NRSTDS;
- writel(tmp, SC_DPLLCTRL2);
+ writel(tmp, sc_base + SC_DPLLCTRL2);
/* Wait until dpll gets stable */
udelay(500);
diff --git a/arch/arm/mach-uniphier/clk/dpll-sld8.c b/arch/arm/mach-uniphier/clk/dpll-sld8.c
index 1d7b75219849..1ac52d11f34a 100644
--- a/arch/arm/mach-uniphier/clk/dpll-sld8.c
+++ b/arch/arm/mach-uniphier/clk/dpll-sld8.c
@@ -22,10 +22,10 @@ int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd)
* [4] ICPD_TEST 0x1
* [3:0] ICPD 0xb
*/
- tmp = readl(SC_DPLLCTRL3);
+ tmp = readl(sc_base + SC_DPLLCTRL3);
tmp &= ~0x00ff0717;
tmp |= 0x00d0061b;
- writel(tmp, SC_DPLLCTRL3);
+ writel(tmp, sc_base + SC_DPLLCTRL3);
/*
* Set DPLL SSC parameters for DPLLCTRL
@@ -33,14 +33,14 @@ int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd)
* [29:20] SSC_UPCNT 132 (0x084) 132 (0x084)
* [14:0] SSC_dK 6335(0x18bf) 12710(0x31a6)
*/
- tmp = readl(SC_DPLLCTRL);
+ tmp = readl(sc_base + SC_DPLLCTRL);
tmp &= ~0x3ff07fff;
#ifdef DPLL_SSC_RATE_1PER
tmp |= 0x084018bf;
#else
tmp |= 0x084031a6;
#endif
- writel(tmp, SC_DPLLCTRL);
+ writel(tmp, sc_base + SC_DPLLCTRL);
/*
* Set DPLL SSC parameters for DPLLCTRL2
@@ -49,10 +49,10 @@ int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd)
* [26:20] SSC_M 79 (0x4f)
* [19:0] SSC_K 964689 (0xeb851)
*/
- tmp = readl(SC_DPLLCTRL2);
+ tmp = readl(sc_base + SC_DPLLCTRL2);
tmp &= ~0xefffffff;
tmp |= 0x0cfeb851;
- writel(tmp, SC_DPLLCTRL2);
+ writel(tmp, sc_base + SC_DPLLCTRL2);
/* Wait 500 usec until dpll gets stable */
udelay(500);
diff --git a/arch/arm/mach-uniphier/clk/dpll-tail.c b/arch/arm/mach-uniphier/clk/dpll-tail.c
index 7f434f669627..6ba5a3672743 100644
--- a/arch/arm/mach-uniphier/clk/dpll-tail.c
+++ b/arch/arm/mach-uniphier/clk/dpll-tail.c
@@ -14,7 +14,7 @@ void uniphier_ld4_dpll_ssc_en(void)
{
u32 tmp;
- tmp = readl(SC_DPLLCTRL);
+ tmp = readl(sc_base + SC_DPLLCTRL);
tmp |= SC_DPLLCTRL_SSC_EN;
- writel(tmp, SC_DPLLCTRL);
+ writel(tmp, sc_base + SC_DPLLCTRL);
}
diff --git a/arch/arm/mach-uniphier/clk/pll-base-ld20.c b/arch/arm/mach-uniphier/clk/pll-base-ld20.c
index 67b8ee7c3e31..ea96d739c53d 100644
--- a/arch/arm/mach-uniphier/clk/pll-base-ld20.c
+++ b/arch/arm/mach-uniphier/clk/pll-base-ld20.c
@@ -12,6 +12,7 @@
#include <linux/io.h>
#include <linux/sizes.h>
+#include "../sc64-regs.h"
#include "pll.h"
/* PLL type: SSC */
@@ -31,13 +32,9 @@
int uniphier_ld20_sscpll_init(unsigned long reg_base, unsigned int freq,
unsigned int ssc_rate, unsigned int divn)
{
- void __iomem *base;
+ void __iomem *base = sc_base + reg_base;
u32 tmp;
- base = ioremap(reg_base, SZ_16);
- if (!base)
- return -ENOMEM;
-
if (freq != UNIPHIER_PLL_FREQ_DEFAULT) {
tmp = readl(base); /* SSCPLLCTRL */
tmp &= ~SC_PLLCTRL_SSC_DK_MASK;
@@ -60,57 +57,39 @@ int uniphier_ld20_sscpll_init(unsigned long reg_base, unsigned int freq,
tmp |= SC_PLLCTRL2_NRSTDS;
writel(tmp, base + 4);
- iounmap(base);
-
return 0;
}
int uniphier_ld20_sscpll_ssc_en(unsigned long reg_base)
{
- void __iomem *base;
+ void __iomem *base = sc_base + reg_base;
u32 tmp;
- base = ioremap(reg_base, SZ_16);
- if (!base)
- return -ENOMEM;
-
tmp = readl(base); /* SSCPLLCTRL */
tmp |= SC_PLLCTRL_SSC_EN;
writel(tmp, base);
- iounmap(base);
-
return 0;
}
int uniphier_ld20_sscpll_set_regi(unsigned long reg_base, unsigned regi)
{
- void __iomem *base;
+ void __iomem *base = sc_base + reg_base;
u32 tmp;
- base = ioremap(reg_base, SZ_16);
- if (!base)
- return -ENOMEM;
-
tmp = readl(base + 8); /* SSCPLLCTRL3 */
tmp &= ~SC_PLLCTRL3_REGI_MASK;
tmp |= FIELD_PREP(SC_PLLCTRL3_REGI_MASK, regi);
writel(tmp, base + 8);
- iounmap(base);
-
return 0;
}
int uniphier_ld20_vpll27_init(unsigned long reg_base)
{
- void __iomem *base;
+ void __iomem *base = sc_base + reg_base;
u32 tmp;
- base = ioremap(reg_base, SZ_16);
- if (!base)
- return -ENOMEM;
-
tmp = readl(base); /* VPLL27CTRL */
tmp |= SC_VPLL27CTRL_WP; /* write protect off */
writel(tmp, base);
@@ -123,25 +102,17 @@ int uniphier_ld20_vpll27_init(unsigned long reg_base)
tmp &= ~SC_VPLL27CTRL_WP; /* write protect on */
writel(tmp, base);
- iounmap(base);
-
return 0;
}
int uniphier_ld20_dspll_init(unsigned long reg_base)
{
- void __iomem *base;
+ void __iomem *base = sc_base + reg_base;
u32 tmp;
- base = ioremap(reg_base, SZ_16);
- if (!base)
- return -ENOMEM;
-
tmp = readl(base + 4); /* DSPLLCTRL2 */
tmp |= SC_DSPLLCTRL2_K_LD;
writel(tmp, base + 4);
- iounmap(base);
-
return 0;
}
diff --git a/arch/arm/mach-uniphier/clk/pll-ld11.c b/arch/arm/mach-uniphier/clk/pll-ld11.c
index fd724f3e8c21..7f07e3e92b86 100644
--- a/arch/arm/mach-uniphier/clk/pll-ld11.c
+++ b/arch/arm/mach-uniphier/clk/pll-ld11.c
@@ -11,15 +11,15 @@
#include "pll.h"
/* PLL type: SSC */
-#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* CPU/ARM */
-#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* misc */
-#define SC_MPLLCTRL (SC_BASE_ADDR | 0x1430) /* DSP */
-#define SC_VSPLLCTRL (SC_BASE_ADDR | 0x1440) /* Video codec, VPE etc. */
-#define SC_DPLLCTRL (SC_BASE_ADDR | 0x1460) /* DDR memory */
+#define SC_CPLLCTRL 0x1400 /* CPU/ARM */
+#define SC_SPLLCTRL 0x1410 /* misc */
+#define SC_MPLLCTRL 0x1430 /* DSP */
+#define SC_VSPLLCTRL 0x1440 /* Video codec, VPE etc. */
+#define SC_DPLLCTRL 0x1460 /* DDR memory */
/* PLL type: VPLL27 */
-#define SC_VPLL27FCTRL (SC_BASE_ADDR | 0x1500)
-#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1520)
+#define SC_VPLL27FCTRL 0x1500
+#define SC_VPLL27ACTRL 0x1520
void uniphier_ld11_pll_init(void)
{
@@ -40,6 +40,6 @@ void uniphier_ld11_pll_init(void)
uniphier_ld20_vpll27_init(SC_VPLL27FCTRL);
uniphier_ld20_vpll27_init(SC_VPLL27ACTRL);
- writel(0, SC_CA53_GEARSET); /* Gear0: CPLL/2 */
- writel(SC_CA_GEARUPD, SC_CA53_GEARUPD);
+ writel(0, sc_base + SC_CA53_GEARSET); /* Gear0: CPLL/2 */
+ writel(SC_CA_GEARUPD, sc_base + SC_CA53_GEARUPD);
}
diff --git a/arch/arm/mach-uniphier/clk/pll-ld20.c b/arch/arm/mach-uniphier/clk/pll-ld20.c
index 682bd1e0c12e..04b3312a2a5a 100644
--- a/arch/arm/mach-uniphier/clk/pll-ld20.c
+++ b/arch/arm/mach-uniphier/clk/pll-ld20.c
@@ -11,23 +11,23 @@
#include "pll.h"
/* PLL type: SSC */
-#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* CPU/ARM */
-#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* misc */
-#define SC_SPLL2CTRL (SC_BASE_ADDR | 0x1420) /* DSP */
-#define SC_MPLLCTRL (SC_BASE_ADDR | 0x1430) /* Video codec */
-#define SC_VPPLLCTRL (SC_BASE_ADDR | 0x1440) /* VPE etc. */
-#define SC_GPPLLCTRL (SC_BASE_ADDR | 0x1450) /* GPU/Mali */
-#define SC_DPLL0CTRL (SC_BASE_ADDR | 0x1460) /* DDR memory 0 */
-#define SC_DPLL1CTRL (SC_BASE_ADDR | 0x1470) /* DDR memory 1 */
-#define SC_DPLL2CTRL (SC_BASE_ADDR | 0x1480) /* DDR memory 2 */
+#define SC_CPLLCTRL 0x1400 /* CPU/ARM */
+#define SC_SPLLCTRL 0x1410 /* misc */
+#define SC_SPLL2CTRL 0x1420 /* DSP */
+#define SC_MPLLCTRL 0x1430 /* Video codec */
+#define SC_VPPLLCTRL 0x1440 /* VPE etc. */
+#define SC_GPPLLCTRL 0x1450 /* GPU/Mali */
+#define SC_DPLL0CTRL 0x1460 /* DDR memory 0 */
+#define SC_DPLL1CTRL 0x1470 /* DDR memory 1 */
+#define SC_DPLL2CTRL 0x1480 /* DDR memory 2 */
/* PLL type: VPLL27 */
-#define SC_VPLL27FCTRL (SC_BASE_ADDR | 0x1500)
-#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1520)
+#define SC_VPLL27FCTRL 0x1500
+#define SC_VPLL27ACTRL 0x1520
/* PLL type: DSPLL */
-#define SC_VPLL8KCTRL (SC_BASE_ADDR | 0x1540)
-#define SC_A2PLLCTRL (SC_BASE_ADDR | 0x15C0)
+#define SC_VPLL8KCTRL 0x1540
+#define SC_A2PLLCTRL 0x15C0
void uniphier_ld20_pll_init(void)
{
diff --git a/arch/arm/mach-uniphier/clk/pll-ld4.c b/arch/arm/mach-uniphier/clk/pll-ld4.c
index 34f1c9cc2898..c66031bdd05a 100644
--- a/arch/arm/mach-uniphier/clk/pll-ld4.c
+++ b/arch/arm/mach-uniphier/clk/pll-ld4.c
@@ -21,9 +21,9 @@ static void upll_init(void)
clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
/* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
- tmp = readl(SC_UPLLCTRL);
+ tmp = readl(sc_base + SC_UPLLCTRL);
tmp &= ~0x18000000;
- writel(tmp, SC_UPLLCTRL);
+ writel(tmp, sc_base + SC_UPLLCTRL);
if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
@@ -38,18 +38,18 @@ static void upll_init(void)
}
}
- writel(tmp, SC_UPLLCTRL);
+ writel(tmp, sc_base + SC_UPLLCTRL);
/* set 1 to K_LD(UPLLCTRL.bit[27]) */
tmp |= 0x08000000;
- writel(tmp, SC_UPLLCTRL);
+ writel(tmp, sc_base + SC_UPLLCTRL);
/* wait 10 usec */
udelay(10);
/* set 1 to SNRT(UPLLCTRL.bit[28]) */
tmp |= 0x10000000;
- writel(tmp, SC_UPLLCTRL);
+ writel(tmp, sc_base + SC_UPLLCTRL);
}
static void vpll_init(void)
@@ -60,88 +60,88 @@ static void vpll_init(void)
clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
/* set 1 to VPLA27WP and VPLA27WP */
- tmp = readl(SC_VPLL27ACTRL);
+ tmp = readl(sc_base + SC_VPLL27ACTRL);
tmp |= 0x00000001;
- writel(tmp, SC_VPLL27ACTRL);
- tmp = readl(SC_VPLL27BCTRL);
+ writel(tmp, sc_base + SC_VPLL27ACTRL);
+ tmp = readl(sc_base + SC_VPLL27BCTRL);
tmp |= 0x00000001;
- writel(tmp, SC_VPLL27BCTRL);
+ writel(tmp, sc_base + SC_VPLL27BCTRL);
/* Set 0 to VPLA_K_LD and VPLB_K_LD */
- tmp = readl(SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27ACTRL3);
tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27BCTRL3);
tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27BCTRL3);
/* Set 0 to VPLA_SNRST and VPLB_SNRST */
- tmp = readl(SC_VPLL27ACTRL2);
+ tmp = readl(sc_base + SC_VPLL27ACTRL2);
tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
+ writel(tmp, sc_base + SC_VPLL27ACTRL2);
+ tmp = readl(sc_base + SC_VPLL27BCTRL2);
tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27BCTRL2);
+ writel(tmp, sc_base + SC_VPLL27BCTRL2);
/* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
- tmp = readl(SC_VPLL27ACTRL2);
+ tmp = readl(sc_base + SC_VPLL27ACTRL2);
tmp &= ~0x0000007f;
tmp |= 0x00000020;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
+ writel(tmp, sc_base + SC_VPLL27ACTRL2);
+ tmp = readl(sc_base + SC_VPLL27BCTRL2);
tmp &= ~0x0000007f;
tmp |= 0x00000020;
- writel(tmp, SC_VPLL27BCTRL2);
+ writel(tmp, sc_base + SC_VPLL27BCTRL2);
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
/* AXO: 25MHz */
- tmp = readl(SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27ACTRL3);
tmp &= ~0x000fffff;
tmp |= 0x00066664;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27BCTRL3);
tmp &= ~0x000fffff;
tmp |= 0x00066664;
- writel(tmp, SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27BCTRL3);
} else {
/* AXO: default 24.576MHz */
- tmp = readl(SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27ACTRL3);
tmp &= ~0x000fffff;
tmp |= 0x000f5800;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27BCTRL3);
tmp &= ~0x000fffff;
tmp |= 0x000f5800;
- writel(tmp, SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27BCTRL3);
}
/* Set 1 to VPLA_K_LD and VPLB_K_LD */
- tmp = readl(SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27ACTRL3);
tmp |= 0x10000000;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27BCTRL3);
tmp |= 0x10000000;
- writel(tmp, SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27BCTRL3);
/* wait 10 usec */
udelay(10);
/* Set 0 to VPLA_SNRST and VPLB_SNRST */
- tmp = readl(SC_VPLL27ACTRL2);
+ tmp = readl(sc_base + SC_VPLL27ACTRL2);
tmp |= 0x10000000;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
+ writel(tmp, sc_base + SC_VPLL27ACTRL2);
+ tmp = readl(sc_base + SC_VPLL27BCTRL2);
tmp |= 0x10000000;
- writel(tmp, SC_VPLL27BCTRL2);
+ writel(tmp, sc_base + SC_VPLL27BCTRL2);
/* set 0 to VPLA27WP and VPLA27WP */
- tmp = readl(SC_VPLL27ACTRL);
+ tmp = readl(sc_base + SC_VPLL27ACTRL);
tmp &= ~0x00000001;
- writel(tmp, SC_VPLL27ACTRL);
- tmp = readl(SC_VPLL27BCTRL);
+ writel(tmp, sc_base + SC_VPLL27ACTRL);
+ tmp = readl(sc_base + SC_VPLL27BCTRL);
tmp |= ~0x00000001;
- writel(tmp, SC_VPLL27BCTRL);
+ writel(tmp, sc_base + SC_VPLL27BCTRL);
}
void uniphier_ld4_pll_init(void)
diff --git a/arch/arm/mach-uniphier/clk/pll-pro4.c b/arch/arm/mach-uniphier/clk/pll-pro4.c
index 312a5fcfdfcf..b7dc3e261f81 100644
--- a/arch/arm/mach-uniphier/clk/pll-pro4.c
+++ b/arch/arm/mach-uniphier/clk/pll-pro4.c
@@ -26,80 +26,80 @@ static void vpll_init(void)
return;
/* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
- tmp = readl(SC_VPLL27ACTRL);
+ tmp = readl(sc_base + SC_VPLL27ACTRL);
tmp |= 0x00000001;
- writel(tmp, SC_VPLL27ACTRL);
- tmp = readl(SC_VPLL27BCTRL);
+ writel(tmp, sc_base + SC_VPLL27ACTRL);
+ tmp = readl(sc_base + SC_VPLL27BCTRL);
tmp |= 0x00000001;
- writel(tmp, SC_VPLL27BCTRL);
+ writel(tmp, sc_base + SC_VPLL27BCTRL);
/* Unset VPLA_K_LD and VPLB_K_LD bit */
- tmp = readl(SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27ACTRL3);
tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27BCTRL3);
tmp &= ~0x10000000;
- writel(tmp, SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27BCTRL3);
/* Set VPLA_M and VPLB_M to 0x20 */
- tmp = readl(SC_VPLL27ACTRL2);
+ tmp = readl(sc_base + SC_VPLL27ACTRL2);
tmp &= ~0x0000007f;
tmp |= 0x00000020;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
+ writel(tmp, sc_base + SC_VPLL27ACTRL2);
+ tmp = readl(sc_base + SC_VPLL27BCTRL2);
tmp &= ~0x0000007f;
tmp |= 0x00000020;
- writel(tmp, SC_VPLL27BCTRL2);
+ writel(tmp, sc_base + SC_VPLL27BCTRL2);
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) {
/* Set VPLA_K and VPLB_K for AXO: 25MHz */
- tmp = readl(SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27ACTRL3);
tmp &= ~0x000fffff;
tmp |= 0x00066666;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27BCTRL3);
tmp &= ~0x000fffff;
tmp |= 0x00066666;
- writel(tmp, SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27BCTRL3);
} else {
/* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */
- tmp = readl(SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27ACTRL3);
tmp &= ~0x000fffff;
tmp |= 0x000f5800;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27BCTRL3);
tmp &= ~0x000fffff;
tmp |= 0x000f5800;
- writel(tmp, SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27BCTRL3);
}
/* wait 1 usec */
udelay(1);
/* Set VPLA_K_LD and VPLB_K_LD to load K parameters */
- tmp = readl(SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27ACTRL3);
tmp |= 0x10000000;
- writel(tmp, SC_VPLL27ACTRL3);
- tmp = readl(SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27ACTRL3);
+ tmp = readl(sc_base + SC_VPLL27BCTRL3);
tmp |= 0x10000000;
- writel(tmp, SC_VPLL27BCTRL3);
+ writel(tmp, sc_base + SC_VPLL27BCTRL3);
/* Unset VPLA_SNRST and VPLB_SNRST bit */
- tmp = readl(SC_VPLL27ACTRL2);
+ tmp = readl(sc_base + SC_VPLL27ACTRL2);
tmp |= 0x10000000;
- writel(tmp, SC_VPLL27ACTRL2);
- tmp = readl(SC_VPLL27BCTRL2);
+ writel(tmp, sc_base + SC_VPLL27ACTRL2);
+ tmp = readl(sc_base + SC_VPLL27BCTRL2);
tmp |= 0x10000000;
- writel(tmp, SC_VPLL27BCTRL2);
+ writel(tmp, sc_base + SC_VPLL27BCTRL2);
/* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
- tmp = readl(SC_VPLL27ACTRL);
+ tmp = readl(sc_base + SC_VPLL27ACTRL);
tmp &= ~0x00000001;
- writel(tmp, SC_VPLL27ACTRL);
- tmp = readl(SC_VPLL27BCTRL);
+ writel(tmp, sc_base + SC_VPLL27ACTRL);
+ tmp = readl(sc_base + SC_VPLL27BCTRL);
tmp &= ~0x00000001;
- writel(tmp, SC_VPLL27BCTRL);
+ writel(tmp, sc_base + SC_VPLL27BCTRL);
}
void uniphier_pro4_pll_init(void)
diff --git a/arch/arm/mach-uniphier/clk/pll-pxs3.c b/arch/arm/mach-uniphier/clk/pll-pxs3.c
index 5a1b1d25aca6..278f530ea9a3 100644
--- a/arch/arm/mach-uniphier/clk/pll-pxs3.c
+++ b/arch/arm/mach-uniphier/clk/pll-pxs3.c
@@ -10,25 +10,25 @@
#include "pll.h"
/* PLL type: SSC */
-#define SC_CPLLCTRL (SC_BASE_ADDR | 0x1400) /* CPU/ARM */
-#define SC_SPLLCTRL (SC_BASE_ADDR | 0x1410) /* misc */
-#define SC_SPLL2CTRL (SC_BASE_ADDR | 0x1420) /* DSP */
-#define SC_VPPLLCTRL (SC_BASE_ADDR | 0x1430) /* VPE */
-#define SC_VGPLLCTRL (SC_BASE_ADDR | 0x1440)
-#define SC_DECPLLCTRL (SC_BASE_ADDR | 0x1450)
-#define SC_ENCPLLCTRL (SC_BASE_ADDR | 0x1460)
-#define SC_PXFPLLCTRL (SC_BASE_ADDR | 0x1470)
-#define SC_DPLL0CTRL (SC_BASE_ADDR | 0x1480) /* DDR memory 0 */
-#define SC_DPLL1CTRL (SC_BASE_ADDR | 0x1490) /* DDR memory 1 */
-#define SC_DPLL2CTRL (SC_BASE_ADDR | 0x14a0) /* DDR memory 2 */
-#define SC_VSPLLCTRL (SC_BASE_ADDR | 0x14c0)
+#define SC_CPLLCTRL 0x1400 /* CPU/ARM */
+#define SC_SPLLCTRL 0x1410 /* misc */
+#define SC_SPLL2CTRL 0x1420 /* DSP */
+#define SC_VPPLLCTRL 0x1430 /* VPE */
+#define SC_VGPLLCTRL 0x1440
+#define SC_DECPLLCTRL 0x1450
+#define SC_ENCPLLCTRL 0x1460
+#define SC_PXFPLLCTRL 0x1470
+#define SC_DPLL0CTRL 0x1480 /* DDR memory 0 */
+#define SC_DPLL1CTRL 0x1490 /* DDR memory 1 */
+#define SC_DPLL2CTRL 0x14a0 /* DDR memory 2 */
+#define SC_VSPLLCTRL 0x14c0
/* PLL type: VPLL27 */
-#define SC_VPLL27FCTRL (SC_BASE_ADDR | 0x1500)
-#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1520)
+#define SC_VPLL27FCTRL 0x1500
+#define SC_VPLL27ACTRL 0x1520
/* PLL type: DSPLL */
-#define SC_VPLL8KCTRL (SC_BASE_ADDR | 0x1540)
+#define SC_VPLL8KCTRL 0x1540
void uniphier_pxs3_pll_init(void)
{
diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c
index 22d2caa1099e..f64ff39c9e65 100644
--- a/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c
+++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-ld6b.c
@@ -22,9 +22,9 @@ unsigned int uniphier_ld6b_debug_uart_init(void)
sg_set_pinsel(115, 0, 8, 4); /* TXD1 -> TXD1 */
sg_set_pinsel(113, 2, 8, 4); /* SBO0 -> TXD2 */
- tmp = readl(SC_CLKCTRL);
+ tmp = readl(sc_base + SC_CLKCTRL);
tmp |= SC_CLKCTRL_CEN_PERI;
- writel(tmp, SC_CLKCTRL);
+ writel(tmp, sc_base + SC_CLKCTRL);
return DIV_ROUND_CLOSEST(UNIPHIER_LD6B_UART_CLK, 16 * CONFIG_BAUDRATE);
}
diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c
index 9017a24a1049..79c6c101e229 100644
--- a/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c
+++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-pro4.c
@@ -22,9 +22,9 @@ unsigned int uniphier_pro4_debug_uart_init(void)
writel(1, sg_base + SG_LOADPINCTRL);
- tmp = readl(SC_CLKCTRL);
+ tmp = readl(sc_base + SC_CLKCTRL);
tmp |= SC_CLKCTRL_CEN_PERI;
- writel(tmp, SC_CLKCTRL);
+ writel(tmp, sc_base + SC_CLKCTRL);
return DIV_ROUND_CLOSEST(UNIPHIER_PRO4_UART_CLK, 16 * CONFIG_BAUDRATE);
}
diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c
index 8e4d15c2913e..ef3b383ee431 100644
--- a/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c
+++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-pro5.c
@@ -25,9 +25,9 @@ unsigned int uniphier_pro5_debug_uart_init(void)
writel(1, sg_base + SG_LOADPINCTRL);
- tmp = readl(SC_CLKCTRL);
+ tmp = readl(sc_base + SC_CLKCTRL);
tmp |= SC_CLKCTRL_CEN_PERI;
- writel(tmp, SC_CLKCTRL);
+ writel(tmp, sc_base + SC_CLKCTRL);
return DIV_ROUND_CLOSEST(UNIPHIER_PRO5_UART_CLK, 16 * CONFIG_BAUDRATE);
}
diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c b/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c
index 5d50c4fa244a..ee8caad1d458 100644
--- a/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c
+++ b/arch/arm/mach-uniphier/debug-uart/debug-uart-pxs2.c
@@ -23,9 +23,9 @@ unsigned int uniphier_pxs2_debug_uart_init(void)
sg_set_pinsel(113, 8, 8, 4); /* TXD2 -> TXD2 */
sg_set_pinsel(219, 8, 8, 4); /* TXD3 -> TXD3 */
- tmp = readl(SC_CLKCTRL);
+ tmp = readl(sc_base + SC_CLKCTRL);
tmp |= SC_CLKCTRL_CEN_PERI;
- writel(tmp, SC_CLKCTRL);
+ writel(tmp, sc_base + SC_CLKCTRL);
return DIV_ROUND_CLOSEST(UNIPHIER_PXS2_UART_CLK, 16 * CONFIG_BAUDRATE);
}
diff --git a/arch/arm/mach-uniphier/reset.c b/arch/arm/mach-uniphier/reset.c
index 28c95e2ce580..31685d000940 100644
--- a/arch/arm/mach-uniphier/reset.c
+++ b/arch/arm/mach-uniphier/reset.c
@@ -22,14 +22,14 @@ void __SECURE reset_cpu(unsigned long ignored)
{
u32 tmp;
- writel(5, SC_IRQTIMSET); /* default value */
+ writel(5, sc_base + SC_IRQTIMSET); /* default value */
- tmp = readl(SC_SLFRSTSEL);
+ tmp = readl(sc_base + SC_SLFRSTSEL);
tmp &= ~0x3; /* mask [1:0] */
tmp |= 0x0; /* XRST reboot */
- writel(tmp, SC_SLFRSTSEL);
+ writel(tmp, sc_base + SC_SLFRSTSEL);
- tmp = readl(SC_SLFRSTCTL);
+ tmp = readl(sc_base + SC_SLFRSTCTL);
tmp |= 0x1;
- writel(tmp, SC_SLFRSTCTL);
+ writel(tmp, sc_base + SC_SLFRSTCTL);
}
diff --git a/arch/arm/mach-uniphier/sc-regs.h b/arch/arm/mach-uniphier/sc-regs.h
index 28de19c039c2..e43116e064bd 100644
--- a/arch/arm/mach-uniphier/sc-regs.h
+++ b/arch/arm/mach-uniphier/sc-regs.h
@@ -10,31 +10,36 @@
#ifndef ARCH_SC_REGS_H
#define ARCH_SC_REGS_H
-#define SC_BASE_ADDR 0x61840000
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#define sc_base ((void __iomem *)SC_BASE)
+#endif
-#define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200)
+#define SC_BASE 0x61840000
+
+#define SC_DPLLCTRL 0x1200
#define SC_DPLLCTRL_SSC_EN (0x1 << 31)
#define SC_DPLLCTRL_FOUTMODE_MASK (0xf << 16)
#define SC_DPLLCTRL_SSC_RATE (0x1 << 15)
-#define SC_DPLLCTRL2 (SC_BASE_ADDR | 0x1204)
+#define SC_DPLLCTRL2 0x1204
#define SC_DPLLCTRL2_NRSTDS (0x1 << 28)
-#define SC_DPLLCTRL3 (SC_BASE_ADDR | 0x1208)
+#define SC_DPLLCTRL3 0x1208
#define SC_DPLLCTRL3_LPFSEL_COEF2 (0x0 << 31)
#define SC_DPLLCTRL3_LPFSEL_COEF3 (0x1 << 31)
-#define SC_UPLLCTRL (SC_BASE_ADDR | 0x1210)
+#define SC_UPLLCTRL 0x1210
-#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1270)
-#define SC_VPLL27ACTRL2 (SC_BASE_ADDR | 0x1274)
-#define SC_VPLL27ACTRL3 (SC_BASE_ADDR | 0x1278)
+#define SC_VPLL27ACTRL 0x1270
+#define SC_VPLL27ACTRL2 0x1274
+#define SC_VPLL27ACTRL3 0x1278
-#define SC_VPLL27BCTRL (SC_BASE_ADDR | 0x1290)
-#define SC_VPLL27BCTRL2 (SC_BASE_ADDR | 0x1294)
-#define SC_VPLL27BCTRL3 (SC_BASE_ADDR | 0x1298)
+#define SC_VPLL27BCTRL 0x1290
+#define SC_VPLL27BCTRL2 0x1294
+#define SC_VPLL27BCTRL3 0x1298
-#define SC_RSTCTRL (SC_BASE_ADDR | 0x2000)
+#define SC_RSTCTRL 0x2000
#define SC_RSTCTRL_NRST_USB3B0 (0x1 << 17) /* USB3 #0 bus */
#define SC_RSTCTRL_NRST_USB3C0 (0x1 << 16) /* USB3 #0 core */
#define SC_RSTCTRL_NRST_ETHER (0x1 << 12)
@@ -44,14 +49,14 @@
#define SC_RSTCTRL_NRST_UMC0 (0x1 << 4)
#define SC_RSTCTRL_NRST_NAND (0x1 << 2)
-#define SC_RSTCTRL2 (SC_BASE_ADDR | 0x2004)
+#define SC_RSTCTRL2 0x2004
#define SC_RSTCTRL2_NRST_USB3B1 (0x1 << 17) /* USB3 #1 bus */
#define SC_RSTCTRL2_NRST_USB3C1 (0x1 << 16) /* USB3 #1 core */
-#define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008)
+#define SC_RSTCTRL3 0x2008
/* Pro5 or newer */
-#define SC_RSTCTRL4 (SC_BASE_ADDR | 0x200c)
+#define SC_RSTCTRL4 0x200c
#define SC_RSTCTRL4_NRST_UMCSB (0x1 << 12) /* UMC system bus */
#define SC_RSTCTRL4_NRST_UMCA2 (0x1 << 10) /* UMC ch2 standby */
#define SC_RSTCTRL4_NRST_UMCA1 (0x1 << 9) /* UMC ch1 standby */
@@ -60,11 +65,11 @@
#define SC_RSTCTRL4_NRST_UMC31 (0x1 << 5) /* UMC ch1 */
#define SC_RSTCTRL4_NRST_UMC30 (0x1 << 4) /* UMC ch0 */
-#define SC_RSTCTRL5 (SC_BASE_ADDR | 0x2010)
+#define SC_RSTCTRL5 0x2010
-#define SC_RSTCTRL6 (SC_BASE_ADDR | 0x2014)
+#define SC_RSTCTRL6 0x2014
-#define SC_CLKCTRL (SC_BASE_ADDR | 0x2104)
+#define SC_CLKCTRL 0x2104
#define SC_CLKCTRL_CEN_USB31 (0x1 << 17) /* USB3 #1 */
#define SC_CLKCTRL_CEN_USB30 (0x1 << 16) /* USB3 #0 */
#define SC_CLKCTRL_CEN_ETHER (0x1 << 12)
@@ -76,15 +81,15 @@
#define SC_CLKCTRL_CEN_PERI (0x1 << 0)
/* Pro5 or newer */
-#define SC_CLKCTRL4 (SC_BASE_ADDR | 0x210c)
+#define SC_CLKCTRL4 0x210c
#define SC_CLKCTRL4_CEN_UMCSB (0x1 << 12) /* UMC system bus */
#define SC_CLKCTRL4_CEN_UMC2 (0x1 << 2) /* UMC ch2 */
#define SC_CLKCTRL4_CEN_UMC1 (0x1 << 1) /* UMC ch1 */
#define SC_CLKCTRL4_CEN_UMC0 (0x1 << 0) /* UMC ch0 */
/* System reset control register */
-#define SC_IRQTIMSET (SC_BASE_ADDR | 0x3000)
-#define SC_SLFRSTSEL (SC_BASE_ADDR | 0x3010)
-#define SC_SLFRSTCTL (SC_BASE_ADDR | 0x3014)
+#define SC_IRQTIMSET 0x3000
+#define SC_SLFRSTSEL 0x3010
+#define SC_SLFRSTCTL 0x3014
#endif /* ARCH_SC_REGS_H */
diff --git a/arch/arm/mach-uniphier/sc64-regs.h b/arch/arm/mach-uniphier/sc64-regs.h
index 83f34e3faf1e..1f3b41a336b3 100644
--- a/arch/arm/mach-uniphier/sc64-regs.h
+++ b/arch/arm/mach-uniphier/sc64-regs.h
@@ -9,28 +9,33 @@
#ifndef SC64_REGS_H
#define SC64_REGS_H
-#define SC_BASE_ADDR 0x61840000
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#define sc_base ((void __iomem *)SC_BASE)
+#endif
-#define SC_RSTCTRL (SC_BASE_ADDR | 0x2000)
-#define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008)
-#define SC_RSTCTRL4 (SC_BASE_ADDR | 0x200c)
-#define SC_RSTCTRL5 (SC_BASE_ADDR | 0x2010)
-#define SC_RSTCTRL6 (SC_BASE_ADDR | 0x2014)
-#define SC_RSTCTRL7 (SC_BASE_ADDR | 0x2018)
+#define SC_BASE 0x61840000
-#define SC_CLKCTRL (SC_BASE_ADDR | 0x2100)
-#define SC_CLKCTRL3 (SC_BASE_ADDR | 0x2108)
-#define SC_CLKCTRL4 (SC_BASE_ADDR | 0x210c)
-#define SC_CLKCTRL5 (SC_BASE_ADDR | 0x2110)
-#define SC_CLKCTRL6 (SC_BASE_ADDR | 0x2114)
-#define SC_CLKCTRL7 (SC_BASE_ADDR | 0x2118)
+#define SC_RSTCTRL 0x2000
+#define SC_RSTCTRL3 0x2008
+#define SC_RSTCTRL4 0x200c
+#define SC_RSTCTRL5 0x2010
+#define SC_RSTCTRL6 0x2014
+#define SC_RSTCTRL7 0x2018
-#define SC_CA72_GEARST (SC_BASE_ADDR | 0x8000)
-#define SC_CA72_GEARSET (SC_BASE_ADDR | 0x8004)
-#define SC_CA72_GEARUPD (SC_BASE_ADDR | 0x8008)
-#define SC_CA53_GEARST (SC_BASE_ADDR | 0x8080)
-#define SC_CA53_GEARSET (SC_BASE_ADDR | 0x8084)
-#define SC_CA53_GEARUPD (SC_BASE_ADDR | 0x8088)
+#define SC_CLKCTRL 0x2100
+#define SC_CLKCTRL3 0x2108
+#define SC_CLKCTRL4 0x210c
+#define SC_CLKCTRL5 0x2110
+#define SC_CLKCTRL6 0x2114
+#define SC_CLKCTRL7 0x2118
+
+#define SC_CA72_GEARST 0x8000
+#define SC_CA72_GEARSET 0x8004
+#define SC_CA72_GEARUPD 0x8008
+#define SC_CA53_GEARST 0x8080
+#define SC_CA53_GEARSET 0x8084
+#define SC_CA53_GEARUPD 0x8088
#define SC_CA_GEARUPD (1 << 0)
#endif /* SC64_REGS_H */
--
2.17.1
More information about the U-Boot
mailing list