[U-Boot] [RESEND PATCH] distro_bootcmd: refactor virtio to support PCI block devices

David Abdurachmanov david.abdurachmanov at gmail.com
Mon Jul 22 08:38:11 UTC 2019


Starting libvirt v5.3.0 with QEMU 4.0.0 use of PCI is automatic
and thus storage is connected via PCI, which is not visible to
U-Boot out-of-the-box.

Refactor to do "pci enum" followed by "virtio scan" to see PCI
connected storage, and allow bootloader to load kernel and
initramfs images.

Tested with Fedora/RISCV using releases: libvirt 5.4.0 & 5.5.0,
QEMU 4.0.0 and U-Boot 2019.07 RC4.

Signed-off-by: David Abdurachmanov <david.abdurachmanov at sifive.com>
---
 include/config_distro_bootcmd.h | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index 26e61ef196..3570a32dff 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -254,11 +254,11 @@
 #endif
 
 #if defined(CONFIG_DM_PCI)
-#define BOOTENV_RUN_NET_PCI_ENUM "run boot_net_pci_enum; "
+#define BOOTENV_RUN_PCI_ENUM "run boot_pci_enum; "
 #define BOOTENV_SHARED_PCI \
-	"boot_net_pci_enum=pci enum\0"
+	"boot_pci_enum=pci enum\0"
 #else
-#define BOOTENV_RUN_NET_PCI_ENUM
+#define BOOTENV_RUN_PCI_ENUM
 #define BOOTENV_SHARED_PCI
 #endif
 
@@ -281,10 +281,24 @@
 #endif
 
 #ifdef CONFIG_CMD_VIRTIO
-#define BOOTENV_SHARED_VIRTIO	BOOTENV_SHARED_BLKDEV(virtio)
+#define BOOTENV_RUN_VIRTIO_INIT "run virtio_init; "
+#define BOOTENV_SET_VIRTIO_NEED_INIT "virtio_need_init=; "
+#define BOOTENV_SHARED_VIRTIO \
+	"virtio_init=" \
+		"if ${virtio_need_init}; then " \
+			"virtio_need_init=false; " \
+			"virtio scan; " \
+		"fi\0" \
+	\
+	"virtio_boot=" \
+		BOOTENV_RUN_PCI_ENUM \
+		BOOTENV_RUN_VIRTIO_INIT \
+		BOOTENV_SHARED_BLKDEV_BODY(virtio)
 #define BOOTENV_DEV_VIRTIO	BOOTENV_DEV_BLKDEV
 #define BOOTENV_DEV_NAME_VIRTIO	BOOTENV_DEV_NAME_BLKDEV
 #else
+#define BOOTENV_RUN_VIRTIO_INIT
+#define BOOTENV_SET_VIRTIO_NEED_INIT
 #define BOOTENV_SHARED_VIRTIO
 #define BOOTENV_DEV_VIRTIO \
 	BOOT_TARGET_DEVICES_references_VIRTIO_without_CONFIG_CMD_VIRTIO
@@ -350,7 +364,7 @@
 #define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \
 	"bootcmd_dhcp=" \
 		BOOTENV_RUN_NET_USB_START \
-		BOOTENV_RUN_NET_PCI_ENUM \
+		BOOTENV_RUN_PCI_ENUM \
 		"if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \
 			"source ${scriptaddr}; " \
 		"fi;" \
@@ -369,7 +383,7 @@
 #define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \
 	"bootcmd_pxe=" \
 		BOOTENV_RUN_NET_USB_START \
-		BOOTENV_RUN_NET_PCI_ENUM \
+		BOOTENV_RUN_PCI_ENUM \
 		"dhcp; " \
 		"if pxe get; then " \
 			"pxe boot; " \
@@ -465,6 +479,7 @@
 	"distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT                      \
 		BOOTENV_SET_NVME_NEED_INIT                                \
 		BOOTENV_SET_IDE_NEED_INIT                                 \
+		BOOTENV_SET_VIRTIO_NEED_INIT                              \
 		"for target in ${boot_targets}; do "                      \
 			"run bootcmd_${target}; "                         \
 		"done\0"
-- 
2.21.0



More information about the U-Boot mailing list