[U-Boot] [PATCH] board/fsl/lx2160ardb: enable flexcan

[Pankaj Bansal]

Flexcan in LX2160ARDB is controlled by FPGA register boardcfg4
bit 5. enable this bit so that flexcan is enabled in LX2160ARDB.

Signed-off-by: Pankaj Bansal <pankaj.bansal at nxp.com>
---
 board/freescale/lx2160a/lx2160a.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index 3b4cb86692..8eac576ab5 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -402,6 +402,20 @@ int config_board_mux(void)
 
 	return 0;
 }
+#elif defined(CONFIG_TARGET_LX2160ARDB)
+int config_board_mux(void)
+{
+	u8 brdcfg;
+
+	// Read BRDCFG4 Register @ 0x54 offset
+	brdcfg = QIXIS_READ(brdcfg[4]);
+	// Enable CFG_CAN_EN_B bit BRDCFG4[5]
+	brdcfg |= BIT_MASK(5);
+	// Write new configuration
+	QIXIS_WRITE(brdcfg[4], brdcfg);
+
+	return 0;
+}
 #else
 int config_board_mux(void)
 {
-- 
2.17.1