[U-Boot] [PATCH 2/3] ARM: imx6q_logic: Enable SPL_DM with SPL_OF_CONTROL

[sbabic at denx.de]

> With the spl code correctly returning either MMC1 or MMC2,
> this board can not boot either from internal eMMC (MMC1) or
> the uSD card on the baseboard (MMC2) using the device tree.
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig
> index 0bb2fc6bbf..07cdeb821b 100644
> --- a/configs/imx6q_logic_defconfig
> +++ b/configs/imx6q_logic_defconfig
> @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000
>  CONFIG_SPL_GPIO_SUPPORT=y
>  CONFIG_SPL_LIBCOMMON_SUPPORT=y
>  CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
>  CONFIG_TARGET_MX6LOGICPD=y
>  CONFIG_SPL_MMC_SUPPORT=y
>  CONFIG_SPL_SERIAL_SUPPORT=y
> @@ -54,12 +55,16 @@ CONFIG_CMD_MTDPARTS=y
>  CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
>  CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),16m(kernel),1m(dtb),-(fs)"
>  CONFIG_CMD_UBI=y
> +CONFIG_SPL_OF_CONTROL=y
>  CONFIG_DEFAULT_DEVICE_TREE="imx6q-logicpd"
>  CONFIG_ENV_IS_IN_FAT=y
>  CONFIG_ENV_IS_IN_NAND=y
>  CONFIG_ENV_FAT_INTERFACE="mmc"
>  CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
>  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> +CONFIG_SPL_DM=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +CONFIG_SPL_OF_TRANSLATE=y
>  CONFIG_PCF8575_GPIO=y
>  CONFIG_LED=y
>  CONFIG_LED_GPIO=y
> @@ -82,6 +87,7 @@ CONFIG_DM_REGULATOR_GPIO=y
>  CONFIG_MXC_UART=y
>  CONFIG_USB=y
>  CONFIG_DM_USB=y
> +# CONFIG_SPL_DM_USB is not set
>  CONFIG_USB_GADGET=y
>  CONFIG_USB_GADGET_MANUFACTURER="FSL"
>  CONFIG_USB_GADGET_VENDOR_NUM=0x0525

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================