[U-Boot] [PATCH v2] mmc: sti_sdhci: Fix sdhci_setup_cfg() call.

[Patrice Chotard]

host->mmc, host->mmc->dev and host->mmc->priv must be set
before calling sdhci_setup_cfg() to avoid hang during mmc
initialization.

Thanks to commit 3d296365e4e8
("mmc: sdhci: Add support for sdhci-caps-mask") which put
this issue into evidence.

Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---

Changes in v2:
  - move host->mmc->priv initialization before sdhci_setup_cfg() call

 drivers/mmc/sti_sdhci.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/sti_sdhci.c b/drivers/mmc/sti_sdhci.c
index 8ed47e113d..d6c75ea601 100644
--- a/drivers/mmc/sti_sdhci.c
+++ b/drivers/mmc/sti_sdhci.c
@@ -97,14 +97,14 @@ static int sti_sdhci_probe(struct udevice *dev)
 		       SDHCI_QUIRK_NO_HISPD_BIT;
 
 	host->host_caps = MMC_MODE_DDR_52MHz;
+	host->mmc = &plat->mmc;
+	host->mmc->dev = dev;
+	host->mmc->priv = host;
 
 	ret = sdhci_setup_cfg(&plat->cfg, host, 50000000, 400000);
 	if (ret)
 		return ret;
 
-	host->mmc = &plat->mmc;
-	host->mmc->priv = host;
-	host->mmc->dev = dev;
 	upriv->mmc = host->mmc;
 
 	return sdhci_probe(dev);
-- 
2.17.1