[U-Boot] [PATCH v1 2/2] board: colibri_imx7: reserve DDR memory for Cortex-M4
Igor Opaniuk
igor.opaniuk at gmail.com
Fri Jul 12 10:50:31 UTC 2019
From: Igor Opaniuk <igor.opaniuk at toradex.com>
i.MX 7's Cortex-M4 core can run from DDR and uses DDR memory for
the rpmsg communication. Both use cases need a fixed location of
memory reserved. For the rpmsg use case the reserved area needs
to be in sync with the kernel's hardcoded vring descriptor location.
Use the linux,usable-memory property to carve out 1MB of memory
in case the M4 core is running. Also make sure that the i.MX 7
specific rpmsg driver does not get loaded in case we do not carve
out memory.
Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk at gmail.com>
---
arch/arm/include/asm/mach-imx/sys_proto.h | 2 ++
board/toradex/colibri_imx7/colibri_imx7.c | 37 +++++++++++++++++++++++
2 files changed, 39 insertions(+)
diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h
index 4925dd7894..775cd3df40 100644
--- a/arch/arm/include/asm/mach-imx/sys_proto.h
+++ b/arch/arm/include/asm/mach-imx/sys_proto.h
@@ -113,6 +113,8 @@ void init_src(void);
void init_snvs(void);
void imx_wdog_disable_powerdown(void);
+int arch_auxiliary_core_check_up(u32 core_id);
+
int board_mmc_get_env_dev(int devno);
int nxp_board_rev(void);
diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c
index 0eb83474c4..6059088bda 100644
--- a/board/toradex/colibri_imx7/colibri_imx7.c
+++ b/board/toradex/colibri_imx7/colibri_imx7.c
@@ -333,6 +333,43 @@ int checkboard(void)
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
+#if defined(CONFIG_IMX_BOOTAUX)
+ int up;
+
+ up = arch_auxiliary_core_check_up(0);
+ if (up) {
+ int ret;
+ int areas = 1;
+ u64 start[2], size[2];
+
+ /*
+ * Reserve 1MB of memory for M4 (1MiB is also the minimum
+ * alignment for Linux due to MMU section size restrictions).
+ */
+ start[0] = gd->bd->bi_dram[0].start;
+ size[0] = SZ_256M - SZ_1M;
+
+ /* If needed, create a second entry for memory beyond 256M */
+ if (gd->bd->bi_dram[0].size > SZ_256M) {
+ start[1] = gd->bd->bi_dram[0].start + SZ_256M;
+ size[1] = gd->bd->bi_dram[0].size - SZ_256M;
+ areas = 2;
+ }
+
+ ret = fdt_set_usable_memory(blob, start, size, areas);
+ if (ret) {
+ eprintf("Cannot set usable memory\n");
+ return ret;
+ }
+ } else {
+ int off;
+
+ off = fdt_node_offset_by_compatible(blob, -1,
+ "fsl,imx7d-rpmsg");
+ if (off > 0)
+ fdt_status_disabled(blob, off);
+ }
+#endif
#if defined(CONFIG_FDT_FIXUP_PARTITIONS)
static const struct node_info nodes[] = {
{ "fsl,imx7d-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
--
2.17.1
More information about the U-Boot
mailing list