[U-Boot] [PATCH 00/52] Support i.MX8MM/N
Lukasz Majewski
lukma at denx.de
Sat Jul 6 22:45:12 UTC 2019
Hi Peng,
> From: Peng Fan <peng.fan at nxp.com>
>
> This patchset is to support i.MX8MM/8MN with some update
> in ddr settings and ddr driver update.
>
> The initial patchset to support i.MX8MM is
> https://patchwork.ozlabs.org/cover/1093140/
> But in this patchset I dropped CCF, and use original CLK uclass, so
> not use V2 in patchset.
I'm a bit confused here regarding the CCF adoption.
From this patch set I do see that in one place you enable CONFIG_CLK_CCF
and CONFIG_SPL_CLK_CCF and then it is removed in the other patch.
For example the patch 48/52 extends the drivers/clk/imx/clk-imx8mm.c,
which looks like the old approach for the clocking.
Am I correct that the v2 of this patch set will use the CCF v5, which
I've sent some time ago (CCF v4 was used on some i.MX8 SoC though)?
>
> Bai Ping (1):
> imx8mq: Update the ddrc QoS setting for B1 chip
>
> Jacky Bai (2):
> driver: ddr: Refine the ddr init driver on imx8m
> ddr: imx8m: Fix the ddr init hang on imx8mq
>
> Peng Fan (47):
> linux: compat: guard PAGE_SIZE
> dm: clk: ignore default settings when node not valid
> pinctrl: imx: use devfdt_get_addr_size_index
> i2c: mxc: add CONFIG_CLK support
> tools: imx8m_image: align spl bin image size
> ddr: imx8m: fix ddr firmware location when enable SPL OF
> tools: imx8mimage: fix HDMI/FIT parsing
> imx8m: add image cfg for i.MX8MM lpddr4
> imx: add IMX8MQ kconfig entry
> imx: add IMX8MM kconfig entry
> imx: imx8mm: add clock bindings header
> imx: add i.MX8MM cpu type
> imx: spl: add spl_board_boot_device for i.MX8MM
> imx8m: update imx-regs for i.MX8MM
> imx: add get_cpu_rev support for i.MX8MM
> imx8m: rename clock to clock_imx8mq
> imx8m: restructure clock.h
> imx8m: add clk support for i.MX8MM
> imx8m: soc: probe clk before relocation
> imx8m: add pin header for i.MX8MM
> imx: add i.MX8MM PE property
> imx8m: Fix MMU table issue for OPTEE memory
> imx8m: set BYPASS ID SWAP to avoid AXI bus errors
> imx8m: soc: enable SCTR clock before timer init
> serial: Kconfig: make MXC_UART usable for MX7 and IMX8M
> clk: imx: add Kconfig entry for i.MX8MM
> clk: imx: add i.MX8MM clk driver
> imx: add i.MX8MM EVK board support
> imx: add i.MX8MN kconfig entry
> imx8mn: support get_cpu_rev
> imx8m: add clk support for i.MX8MN
> imx8mn: set BYPASS ID SWAP to avoid AXI bus errors
> imx: add i.MX8MN PE property
> imx8mn: add pin header
> imx: spl: use spl_board_boot_device for i.MX8MN
> spl: pass args to board_return_to_bootrom
> imx: add rom api support
> imx: cpu: restrict get_boot_device
> imx8mn: add get_boot_device
> power: pmic: add SPL_DM_PMIC
> tools: imx8mimage: add ROM VERSION
> pinctrl: imx8m: support i.MX8MN
> tools: imx8m_image: support ddr4 firmware
> clk: imx: add i.MX8MN clk support
> imx8m: add i.MX8MN ddr4 image cfg file
> imx: add dtsi for i.MX8MN
> imx: add i.MX8MN DDR4 board support
>
> Ye Li (2):
> imx8m: Configure trustzone region 0 for non-secure access
> ddr: imx8m: Fix ddr4 driver build issue
>
> arch/arm/dts/Makefile | 4 +-
> arch/arm/dts/imx8mm-evk-u-boot.dtsi | 92 +
> arch/arm/dts/imx8mm-evk.dts | 235 +++
> arch/arm/dts/imx8mm-pinfunc.h | 629 +++++++
> arch/arm/dts/imx8mm.dtsi | 733 ++++++++
> arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 92 +
> arch/arm/dts/imx8mn-ddr4-evk.dts | 221 +++
> arch/arm/dts/imx8mn-pinfunc.h | 646 +++++++
> arch/arm/dts/imx8mn.dtsi | 712 +++++++
> arch/arm/include/asm/arch-imx/cpu.h | 7 +
> arch/arm/include/asm/arch-imx8m/clock.h | 494 +----
> arch/arm/include/asm/arch-imx8m/clock_imx8mm.h | 465 +++++
> arch/arm/include/asm/arch-imx8m/clock_imx8mq.h | 424 +++++
> arch/arm/include/asm/arch-imx8m/imx-regs.h | 75 +-
> arch/arm/include/asm/arch-imx8m/imx8mm_pins.h | 691 +++++++
> arch/arm/include/asm/arch-imx8m/imx8mn_pins.h | 763 ++++++++
> arch/arm/include/asm/mach-imx/iomux-v3.h | 4 +
> arch/arm/include/asm/mach-imx/mxc_i2c.h | 2 +
> arch/arm/include/asm/mach-imx/sys_proto.h | 42 +
> arch/arm/mach-imx/Kconfig | 4 +
> arch/arm/mach-imx/Makefile | 2 +
> arch/arm/mach-imx/cpu.c | 16 +-
> arch/arm/mach-imx/imx8m/Kconfig | 28 +-
> arch/arm/mach-imx/imx8m/Makefile | 4 +-
> arch/arm/mach-imx/imx8m/clock_imx8mm.c | 707 +++++++
> .../arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} | 7 +-
> arch/arm/mach-imx/imx8m/clock_slice.c | 815 ++++++++
> arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg | 16 +
> arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg | 17 +
> arch/arm/mach-imx/imx8m/soc.c | 162 +-
> arch/arm/mach-imx/spl.c | 8 +
> arch/arm/mach-imx/spl_imx_romapi.c | 292 +++
> arch/arm/mach-rockchip/rk3288-board-tpl.c | 5 +-
> arch/arm/mach-rockchip/rk3368-board-tpl.c | 5 +-
> arch/arm/mach-rockchip/rk3399-board-spl.c | 5 +-
> arch/arm/mach-rockchip/rk3399-board-tpl.c | 5 +-
> board/freescale/imx8mm_evk/Kconfig | 12 +
> board/freescale/imx8mm_evk/MAINTAINERS | 6 +
> board/freescale/imx8mm_evk/Makefile | 12 +
> board/freescale/imx8mm_evk/imx8mm_evk.c | 90 +
> board/freescale/imx8mm_evk/lpddr4_timing.c | 1980
> ++++++++++++++++++++
> board/freescale/imx8mm_evk/spl.c | 216 +++
> board/freescale/imx8mn_evk/Kconfig | 14 +
> board/freescale/imx8mn_evk/MAINTAINERS | 6 +
> board/freescale/imx8mn_evk/Makefile | 12 +
> board/freescale/imx8mn_evk/ddr4_timing.c | 1214
> ++++++++++++ board/freescale/imx8mn_evk/imx8mn_evk.c |
> 85 + board/freescale/imx8mn_evk/spl.c | 91 +
> board/freescale/imx8mq_evk/lpddr4_timing.c | 16 +-
> common/spl/spl_bootrom.c | 7 +-
> configs/imx8mm_evk_defconfig | 51 +
> configs/imx8mn_ddr4_evk_defconfig | 55 +
> drivers/clk/clk-uclass.c | 3 +
> drivers/clk/imx/Kconfig | 14 +
> drivers/clk/imx/Makefile | 1 +
> drivers/clk/imx/clk-imx8mm.c | 121 ++
> drivers/ddr/imx/imx8m/Kconfig | 6 +
> drivers/ddr/imx/imx8m/Makefile | 4 +-
> drivers/ddr/imx/imx8m/ddr4_init.c | 113 --
> drivers/ddr/imx/imx8m/ddr_init.c | 168 ++
> drivers/ddr/imx/imx8m/ddrphy_utils.c | 4 +
> drivers/ddr/imx/imx8m/helper.c | 22 +-
> drivers/ddr/imx/imx8m/lpddr4_init.c | 188 --
> drivers/i2c/mxc_i2c.c | 24 +-
> drivers/pinctrl/nxp/pinctrl-imx.c | 4 +-
> drivers/pinctrl/nxp/pinctrl-imx8m.c | 1 +
> drivers/power/pmic/Kconfig | 12 +
> drivers/power/pmic/Makefile | 2 +-
> drivers/serial/Kconfig | 2 +-
> include/configs/imx8mm_evk.h | 200 ++
> include/configs/imx8mn_evk.h | 198 ++
> include/dt-bindings/clock/imx8mm-clock.h | 244 +++
> include/dt-bindings/clock/imx8mn-clock.h | 215 +++
> include/imximage.h | 1 +
> include/linux/compat.h | 2 +
> include/power/pmic.h | 2 +-
> include/spl.h | 3 +-
> tools/imx8m_image.sh | 15 +-
> tools/imx8mimage.c | 31 +- 79 files
> changed, 13082 insertions(+), 814 deletions(-) create mode 100644
> arch/arm/dts/imx8mm-evk-u-boot.dtsi create mode 100644
> arch/arm/dts/imx8mm-evk.dts create mode 100644
> arch/arm/dts/imx8mm-pinfunc.h create mode 100644
> arch/arm/dts/imx8mm.dtsi create mode 100644
> arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi create mode 100644
> arch/arm/dts/imx8mn-ddr4-evk.dts create mode 100644
> arch/arm/dts/imx8mn-pinfunc.h create mode 100644
> arch/arm/dts/imx8mn.dtsi create mode 100644
> arch/arm/include/asm/arch-imx8m/clock_imx8mm.h create mode 100644
> arch/arm/include/asm/arch-imx8m/clock_imx8mq.h create mode 100644
> arch/arm/include/asm/arch-imx8m/imx8mm_pins.h create mode 100644
> arch/arm/include/asm/arch-imx8m/imx8mn_pins.h create mode 100644
> arch/arm/mach-imx/imx8m/clock_imx8mm.c rename
> arch/arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} (99%) create mode
> 100644 arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg create mode
> 100644 arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg create mode
> 100644 arch/arm/mach-imx/spl_imx_romapi.c create mode 100644
> board/freescale/imx8mm_evk/Kconfig create mode 100644
> board/freescale/imx8mm_evk/MAINTAINERS create mode 100644
> board/freescale/imx8mm_evk/Makefile create mode 100644
> board/freescale/imx8mm_evk/imx8mm_evk.c create mode 100644
> board/freescale/imx8mm_evk/lpddr4_timing.c create mode 100644
> board/freescale/imx8mm_evk/spl.c create mode 100644
> board/freescale/imx8mn_evk/Kconfig create mode 100644
> board/freescale/imx8mn_evk/MAINTAINERS create mode 100644
> board/freescale/imx8mn_evk/Makefile create mode 100644
> board/freescale/imx8mn_evk/ddr4_timing.c create mode 100644
> board/freescale/imx8mn_evk/imx8mn_evk.c create mode 100644
> board/freescale/imx8mn_evk/spl.c create mode 100644
> configs/imx8mm_evk_defconfig create mode 100644
> configs/imx8mn_ddr4_evk_defconfig create mode 100644
> drivers/clk/imx/clk-imx8mm.c delete mode 100644
> drivers/ddr/imx/imx8m/ddr4_init.c create mode 100644
> drivers/ddr/imx/imx8m/ddr_init.c delete mode 100644
> drivers/ddr/imx/imx8m/lpddr4_init.c create mode 100644
> include/configs/imx8mm_evk.h create mode 100644
> include/configs/imx8mn_evk.h create mode 100644
> include/dt-bindings/clock/imx8mm-clock.h create mode 100644
> include/dt-bindings/clock/imx8mn-clock.h
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190707/b61f96d3/attachment.sig>
More information about the U-Boot
mailing list