[U-Boot] [PATCH v4 3/6] drivers: net: add NXP ENETC MDIO driver
Alex Marginean
alexandru.marginean at nxp.com
Wed Jul 3 09:11:41 UTC 2019
Adds a driver for the MDIO interface currently integrated in LS1028A SoC.
This MDIO interface is shared by multiple ethernet interfaces and is
presented as a stand-alone PCI function on the SoC ECAM.
Ethernet has a functional dependency on MDIO, for simplicity there is a
single config option for both.
Signed-off-by: Alex Marginean <alexm.osslist at gmail.com>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
---
drivers/net/Kconfig | 2 +-
drivers/net/Makefile | 2 +-
drivers/net/fsl_enetc.c | 57 ++++++++++++++
drivers/net/fsl_enetc.h | 21 +++++
drivers/net/fsl_enetc_mdio.c | 149 +++++++++++++++++++++++++++++++++++
5 files changed, 229 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/fsl_enetc_mdio.c
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1fe038b859..c4f4e04ff8 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -568,7 +568,7 @@ config HIGMACV300_ETH
config FSL_ENETC
bool "NXP ENETC Ethernet controller"
- depends on DM_PCI && DM_ETH
+ depends on DM_PCI && DM_ETH && DM_MDIO
help
This driver supports the NXP ENETC Ethernet controller found on some
of the NXP SoCs.
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index c08dc2e20c..1247b39a54 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -78,4 +78,4 @@ obj-$(CONFIG_MEDIATEK_ETH) += mtk_eth.o
obj-y += mscc_eswitch/
obj-$(CONFIG_HIGMACV300_ETH) += higmacv300.o
obj-$(CONFIG_MDIO_SANDBOX) += mdio_sandbox.o
-obj-$(CONFIG_FSL_ENETC) += fsl_enetc.o
+obj-$(CONFIG_FSL_ENETC) += fsl_enetc.o fsl_enetc_mdio.o
diff --git a/drivers/net/fsl_enetc.c b/drivers/net/fsl_enetc.c
index 58ba63ceb1..f14b484b26 100644
--- a/drivers/net/fsl_enetc.c
+++ b/drivers/net/fsl_enetc.c
@@ -10,6 +10,7 @@
#include <memalign.h>
#include <asm/io.h>
#include <pci.h>
+#include <miiphy.h>
#include "fsl_enetc.h"
@@ -38,6 +39,59 @@ static int enetc_bind(struct udevice *dev)
return 0;
}
+/* Configure the actual/external ethernet PHY, if one is found */
+static void enetc_start_phy(struct udevice *dev)
+{
+ struct enetc_priv *priv = dev_get_priv(dev);
+ struct udevice *miidev;
+ struct phy_device *phy;
+ u32 phandle, phy_id;
+ ofnode phy_node;
+ int supported;
+
+ if (!ofnode_valid(dev->node)) {
+ enetc_dbg(dev, "no enetc ofnode found, skipping PHY set-up\n");
+ return;
+ }
+
+ if (ofnode_read_u32(dev->node, "phy-handle", &phandle)) {
+ enetc_dbg(dev, "phy-handle not found, skipping PHY set-up\n");
+ return;
+ }
+
+ phy_node = ofnode_get_by_phandle(phandle);
+ if (!ofnode_valid(phy_node)) {
+ enetc_dbg(dev, "invalid phy node, skipping PHY set-up\n");
+ return;
+ }
+ enetc_dbg(dev, "phy node: %s\n", ofnode_get_name(phy_node));
+
+ if (ofnode_read_u32(phy_node, "reg", &phy_id)) {
+ enetc_dbg(dev,
+ "missing reg in PHY node, skipping PHY set-up\n");
+ return;
+ }
+
+ if (uclass_get_device_by_ofnode(UCLASS_MDIO,
+ ofnode_get_parent(phy_node),
+ &miidev)) {
+ enetc_dbg(dev, "can't find MDIO bus for node %s\n",
+ ofnode_get_name(ofnode_get_parent(phy_node)));
+ return;
+ }
+
+ phy = dm_mdio_phy_connect(miidev, phy_id, dev, priv->if_type);
+ if (!phy) {
+ enetc_dbg(dev, "dm_mdio_phy_connect returned null\n");
+ return;
+ }
+
+ supported = GENMASK(6, 0); /* speeds up to 1G & AN */
+ phy->advertising = phy->supported & supported;
+ phy_config(phy);
+ phy_startup(phy);
+}
+
/*
* Probe ENETC driver:
* - initialize port and station interface BARs
@@ -249,6 +303,9 @@ static int enetc_start(struct udevice *dev)
enetc_setup_tx_bdr(dev);
enetc_setup_rx_bdr(dev);
+ priv->if_type = PHY_INTERFACE_MODE_NONE;
+ enetc_start_phy(dev);
+
return 0;
}
diff --git a/drivers/net/fsl_enetc.h b/drivers/net/fsl_enetc.h
index 155ecc895b..fbb9dfa15e 100644
--- a/drivers/net/fsl_enetc.h
+++ b/drivers/net/fsl_enetc.h
@@ -11,6 +11,7 @@
/* PCI function IDs */
#define PCI_DEVICE_ID_ENETC_ETH 0xE100
+#define PCI_DEVICE_ID_ENETC_MDIO 0xEE01
/* ENETC Ethernet controller registers */
/* Station interface register offsets */
@@ -143,6 +144,8 @@ struct enetc_priv {
/* Rx/Tx buffer descriptor rings info */
struct bd_ring tx_bdr;
struct bd_ring rx_bdr;
+
+ int if_type;
};
/* register accessors */
@@ -165,4 +168,22 @@ struct enetc_priv {
#define enetc_bdr_write(priv, t, n, off, val) \
enetc_write(priv, ENETC_BDR(t, n, off), val)
+/* ENETC external MDIO registers */
+#define ENETC_MDIO_BASE 0x1c00
+#define ENETC_MDIO_CFG 0x00
+#define ENETC_EMDIO_CFG_C22 0x00809508
+#define ENETC_EMDIO_CFG_C45 0x00809548
+#define ENETC_EMDIO_CFG_RD_ER BIT(1)
+#define ENETC_EMDIO_CFG_BSY BIT(0)
+#define ENETC_MDIO_CTL 0x04
+#define ENETC_MDIO_CTL_READ BIT(15)
+#define ENETC_MDIO_DATA 0x08
+#define ENETC_MDIO_STAT 0x0c
+
+#define ENETC_MDIO_READ_ERR 0xffff
+
+struct enetc_mdio_priv {
+ void *regs_base;
+};
+
#endif /* _ENETC_H */
diff --git a/drivers/net/fsl_enetc_mdio.c b/drivers/net/fsl_enetc_mdio.c
new file mode 100644
index 0000000000..46afac06d7
--- /dev/null
+++ b/drivers/net/fsl_enetc_mdio.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ENETC ethernet controller driver
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <pci.h>
+#include <miiphy.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <miiphy.h>
+
+#include "fsl_enetc.h"
+
+static void enetc_mdio_wait_bsy(struct enetc_mdio_priv *priv)
+{
+ while (enetc_read(priv, ENETC_MDIO_CFG) & ENETC_EMDIO_CFG_BSY)
+ cpu_relax();
+}
+
+static int enetc_mdio_read_priv(struct enetc_mdio_priv *priv, int addr,
+ int devad, int reg)
+{
+ if (devad == MDIO_DEVAD_NONE)
+ enetc_write(priv, ENETC_MDIO_CFG, ENETC_EMDIO_CFG_C22);
+ else
+ enetc_write(priv, ENETC_MDIO_CFG, ENETC_EMDIO_CFG_C45);
+ enetc_mdio_wait_bsy(priv);
+
+ if (devad == MDIO_DEVAD_NONE) {
+ enetc_write(priv, ENETC_MDIO_CTL, ENETC_MDIO_CTL_READ |
+ (addr << 5) | reg);
+ } else {
+ enetc_write(priv, ENETC_MDIO_CTL, (addr << 5) + devad);
+ enetc_mdio_wait_bsy(priv);
+
+ enetc_write(priv, ENETC_MDIO_STAT, reg);
+ enetc_mdio_wait_bsy(priv);
+
+ enetc_write(priv, ENETC_MDIO_CTL, ENETC_MDIO_CTL_READ |
+ (addr << 5) | devad);
+ }
+
+ enetc_mdio_wait_bsy(priv);
+ if (enetc_read(priv, ENETC_MDIO_CFG) & ENETC_EMDIO_CFG_RD_ER)
+ return ENETC_MDIO_READ_ERR;
+
+ return enetc_read(priv, ENETC_MDIO_DATA);
+}
+
+static int enetc_mdio_write_priv(struct enetc_mdio_priv *priv, int addr,
+ int devad, int reg, u16 val)
+{
+ if (devad == MDIO_DEVAD_NONE)
+ enetc_write(priv, ENETC_MDIO_CFG, ENETC_EMDIO_CFG_C22);
+ else
+ enetc_write(priv, ENETC_MDIO_CFG, ENETC_EMDIO_CFG_C45);
+ enetc_mdio_wait_bsy(priv);
+
+ if (devad != MDIO_DEVAD_NONE) {
+ enetc_write(priv, ENETC_MDIO_CTL, (addr << 5) + devad);
+ enetc_write(priv, ENETC_MDIO_STAT, reg);
+ } else {
+ enetc_write(priv, ENETC_MDIO_CTL, (addr << 5) + reg);
+ }
+ enetc_mdio_wait_bsy(priv);
+
+ enetc_write(priv, ENETC_MDIO_DATA, val);
+ enetc_mdio_wait_bsy(priv);
+
+ return 0;
+}
+
+/* DM wrappers */
+static int dm_enetc_mdio_read(struct udevice *dev, int addr, int devad, int reg)
+{
+ struct enetc_mdio_priv *priv = dev_get_priv(dev);
+
+ return enetc_mdio_read_priv(priv, addr, devad, reg);
+}
+
+static int dm_enetc_mdio_write(struct udevice *dev, int addr, int devad,
+ int reg, u16 val)
+{
+ struct enetc_mdio_priv *priv = dev_get_priv(dev);
+
+ return enetc_mdio_write_priv(priv, addr, devad, reg, val);
+}
+
+static const struct mdio_ops enetc_mdio_ops = {
+ .read = dm_enetc_mdio_read,
+ .write = dm_enetc_mdio_write,
+};
+
+static int enetc_mdio_bind(struct udevice *dev)
+{
+ char name[16];
+ static int eth_num_devices;
+
+ /*
+ * prefer using PCI function numbers to number interfaces, but these
+ * are only available if dts nodes are present. For PCI they are
+ * optional, handle that case too. Just in case some nodes are present
+ * and some are not, use different naming scheme - enetc-N based on
+ * PCI function # and enetc#N based on interface count
+ */
+ if (ofnode_valid(dev->node))
+ sprintf(name, "emdio-%u", PCI_FUNC(pci_get_devfn(dev)));
+ else
+ sprintf(name, "emdio#%u", eth_num_devices++);
+ device_set_name(dev, name);
+
+ return 0;
+}
+
+static int enetc_mdio_probe(struct udevice *dev)
+{
+ struct enetc_mdio_priv *priv = dev_get_priv(dev);
+
+ priv->regs_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, 0);
+ if (!priv->regs_base) {
+ enetc_dbg(dev, "failed to map BAR0\n");
+ return -EINVAL;
+ }
+
+ priv->regs_base += ENETC_MDIO_BASE;
+
+ dm_pci_clrset_config16(dev, PCI_COMMAND, 0, PCI_COMMAND_MEMORY);
+
+ return 0;
+}
+
+U_BOOT_DRIVER(enetc_mdio) = {
+ .name = "enetc_mdio",
+ .id = UCLASS_MDIO,
+ .bind = enetc_mdio_bind,
+ .probe = enetc_mdio_probe,
+ .ops = &enetc_mdio_ops,
+ .priv_auto_alloc_size = sizeof(struct enetc_mdio_priv),
+};
+
+static struct pci_device_id enetc_mdio_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, PCI_DEVICE_ID_ENETC_MDIO) },
+};
+
+U_BOOT_PCI_DEVICE(enetc_mdio, enetc_mdio_ids);
--
2.17.1
More information about the U-Boot
mailing list