[U-Boot] [PATCH v3 39/57] ram: rk3399: Update lpddr4 mode_sel based on io settings

Jagan Teki jagan at amarulasolutions.com
Tue Jul 16 11:57:27 UTC 2019


The mode_sel on lpddr4 value is depending on IO settings
of rd_vref.

Add support for it.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Signed-off-by: YouMin Chen <cym at rock-chips.com>
---
 drivers/ram/rockchip/sdram_rk3399.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
index 4a2622a440..63763062f9 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -347,7 +347,7 @@ static int phy_io_config(const struct chan_info *chan,
 	u32 drv_value, odt_value;
 	u32 speed;
 
-	/* vref setting */
+	/* vref setting & mode setting */
 	if (params->base.dramtype == LPDDR4) {
 		struct io_setting *io = lpddr4_get_io_settings(params, mr5);
 		u32 rd_vref = io->rd_vref * 1000;
@@ -355,15 +355,18 @@ static int phy_io_config(const struct chan_info *chan,
 		if (rd_vref < 36700) {
 			/* MODE_LV[2:0] = LPDDR4 (Range 2)*/
 			vref_mode_dq = 0x7;
+			/* MODE[2:0]= LPDDR4 Range 2(0.4*VDDQ) */
+			mode_sel = 0x5;
 			vref_value_dq = (rd_vref - 3300) / 521;
 		} else {
 			/* MODE_LV[2:0] = LPDDR4 (Range 1)*/
 			vref_mode_dq = 0x6;
+			/* MODE[2:0]= LPDDR4 Range 1(0.33*VDDQ) */
+			mode_sel = 0x4;
 			vref_value_dq = (rd_vref - 15300) / 521;
 		}
 		vref_mode_ac = 0x6;
 		vref_value_ac = 0x1f;
-		mode_sel = 0x6;
 	} else if (params->base.dramtype == LPDDR3) {
 		if (params->base.odt == 1) {
 			vref_mode_dq = 0x5;  /* LPDDR3 ODT */
-- 
2.18.0.321.gffc6fa0e3



More information about the U-Boot mailing list