[U-Boot] [PATCH 07/50] doc: driver-model: Convert fs_firmware_loader.txt to reST
Bin Meng
bmeng.cn at gmail.com
Thu Jul 18 07:33:52 UTC 2019
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---
doc/driver-model/fs_firmware_loader.rst | 154 ++++++++++++++++++++++++++++++++
doc/driver-model/fs_firmware_loader.txt | 148 ------------------------------
doc/driver-model/index.rst | 1 +
3 files changed, 155 insertions(+), 148 deletions(-)
create mode 100644 doc/driver-model/fs_firmware_loader.rst
delete mode 100644 doc/driver-model/fs_firmware_loader.txt
diff --git a/doc/driver-model/fs_firmware_loader.rst b/doc/driver-model/fs_firmware_loader.rst
new file mode 100644
index 0000000..a44708c
--- /dev/null
+++ b/doc/driver-model/fs_firmware_loader.rst
@@ -0,0 +1,154 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. Copyright (C) 2018-2019 Intel Corporation <www.intel.com>
+
+File System Firmware Loader
+===========================
+
+This is file system firmware loader for U-Boot framework, which has very close
+to some Linux Firmware API. For the details of Linux Firmware API, you can refer
+to https://01.org/linuxgraphics/gfx-docs/drm/driver-api/firmware/index.html.
+
+File system firmware loader can be used to load whatever(firmware, image,
+and binary) from the storage device in file system format into target location
+such as memory, then consumer driver such as FPGA driver can program FPGA image
+from the target location into FPGA.
+
+To enable firmware loader, CONFIG_FS_LOADER need to be set at
+<board_name>_defconfig such as "CONFIG_FS_LOADER=y".
+
+Firmware Loader API core features
+---------------------------------
+
+Firmware storage device described in device tree source
+-------------------------------------------------------
+For passing data like storage device phandle and partition where the
+firmware loading from to the firmware loader driver, those data could be
+defined in fs-loader node as shown in below:
+
+Example for block device::
+
+ fs_loader0: fs-loader {
+ u-boot,dm-pre-reloc;
+ compatible = "u-boot,fs-loader";
+ phandlepart = <&mmc 1>;
+ };
+
+<&mmc 1> means block storage device pointer and its partition.
+
+Above example is a description for block storage, but for UBI storage
+device, it can be described in FDT as shown in below:
+
+Example for ubi::
+
+ fs_loader1: fs-loader {
+ u-boot,dm-pre-reloc;
+ compatible = "u-boot,fs-loader";
+ mtdpart = "UBI",
+ ubivol = "ubi0";
+ };
+
+Then, firmware-loader property can be added with any device node, which
+driver would use the firmware loader for loading.
+
+The value of the firmware-loader property should be set with phandle
+of the fs-loader node. For example::
+
+ firmware-loader = <&fs_loader0>;
+
+If there are majority of devices using the same fs-loader node, then
+firmware-loader property can be added under /chosen node instead of
+adding to each of device node.
+
+For example::
+
+ /{
+ chosen {
+ firmware-loader = <&fs_loader0>;
+ };
+ };
+
+In each respective driver of devices using firmware loader, the firmware
+loaded instance should be created by DT phandle.
+
+For example of getting DT phandle from /chosen and creating instance:
+
+.. code-block:: c
+
+ chosen_node = ofnode_path("/chosen");
+ if (!ofnode_valid(chosen_node)) {
+ debug("/chosen node was not found.\n");
+ return -ENOENT;
+ }
+
+ phandle_p = ofnode_get_property(chosen_node, "firmware-loader", &size);
+ if (!phandle_p) {
+ debug("firmware-loader property was not found.\n");
+ return -ENOENT;
+ }
+
+ phandle = fdt32_to_cpu(*phandle_p);
+ ret = uclass_get_device_by_phandle_id(UCLASS_FS_FIRMWARE_LOADER,
+ phandle, &dev);
+ if (ret)
+ return ret;
+
+Firmware loader driver is also designed to support U-boot environment
+variables, so all these data from FDT can be overwritten
+through the U-boot environment variable during run time.
+
+For examples:
+
+storage_interface:
+ Storage interface, it can be "mmc", "usb", "sata" or "ubi".
+fw_dev_part:
+ Block device number and its partition, it can be "0:1".
+fw_ubi_mtdpart:
+ UBI device mtd partition, it can be "UBI".
+fw_ubi_volume:
+ UBI volume, it can be "ubi0".
+
+When above environment variables are set, environment values would be
+used instead of data from FDT.
+The benefit of this design allows user to change storage attribute data
+at run time through U-boot console and saving the setting as default
+environment values in the storage for the next power cycle, so no
+compilation is required for both driver and FDT.
+
+File system firmware Loader API
+-------------------------------
+
+.. code-block:: c
+
+ int request_firmware_into_buf(struct udevice *dev,
+ const char *name,
+ void *buf, size_t size, u32 offset)
+
+Load firmware into a previously allocated buffer
+
+Parameters:
+
+* struct udevice \*dev: An instance of a driver
+* const char \*name: name of firmware file
+* void \*buf: address of buffer to load firmware into
+* size_t size: size of buffer
+* u32 offset: offset of a file for start reading into buffer
+
+Returns:
+ size of total read
+ -ve when error
+
+Description:
+ The firmware is loaded directly into the buffer pointed to by buf
+
+Example of calling request_firmware_into_buf API after creating firmware loader
+instance:
+
+.. code-block:: c
+
+ ret = uclass_get_device_by_phandle_id(UCLASS_FS_FIRMWARE_LOADER,
+ phandle, &dev);
+ if (ret)
+ return ret;
+
+ request_firmware_into_buf(dev, filename, buffer_location, buffer_size,
+ offset_ofreading);
diff --git a/doc/driver-model/fs_firmware_loader.txt b/doc/driver-model/fs_firmware_loader.txt
deleted file mode 100644
index 8be6185..0000000
--- a/doc/driver-model/fs_firmware_loader.txt
+++ /dev/null
@@ -1,148 +0,0 @@
-# Copyright (C) 2018-2019 Intel Corporation <www.intel.com>
-#
-# SPDX-License-Identifier: GPL-2.0
-
-Introduction
-============
-
-This is file system firmware loader for U-Boot framework, which has very close
-to some Linux Firmware API. For the details of Linux Firmware API, you can refer
-to https://01.org/linuxgraphics/gfx-docs/drm/driver-api/firmware/index.html.
-
-File system firmware loader can be used to load whatever(firmware, image,
-and binary) from the storage device in file system format into target location
-such as memory, then consumer driver such as FPGA driver can program FPGA image
-from the target location into FPGA.
-
-To enable firmware loader, CONFIG_FS_LOADER need to be set at
-<board_name>_defconfig such as "CONFIG_FS_LOADER=y".
-
-Firmware Loader API core features
----------------------------------
-
-Firmware storage device described in device tree source
--------------------------------------------------------
- For passing data like storage device phandle and partition where the
- firmware loading from to the firmware loader driver, those data could be
- defined in fs-loader node as shown in below:
-
- Example for block device:
- fs_loader0: fs-loader {
- u-boot,dm-pre-reloc;
- compatible = "u-boot,fs-loader";
- phandlepart = <&mmc 1>;
- };
-
- <&mmc 1> means block storage device pointer and its partition.
-
- Above example is a description for block storage, but for UBI storage
- device, it can be described in FDT as shown in below:
-
- Example for ubi:
- fs_loader1: fs-loader {
- u-boot,dm-pre-reloc;
- compatible = "u-boot,fs-loader";
- mtdpart = "UBI",
- ubivol = "ubi0";
- };
-
- Then, firmware-loader property can be added with any device node, which
- driver would use the firmware loader for loading.
-
- The value of the firmware-loader property should be set with phandle
- of the fs-loader node.
- For example:
- firmware-loader = <&fs_loader0>;
-
- If there are majority of devices using the same fs-loader node, then
- firmware-loader property can be added under /chosen node instead of
- adding to each of device node.
-
- For example:
- /{
- chosen {
- firmware-loader = <&fs_loader0>;
- };
- };
-
- In each respective driver of devices using firmware loader, the firmware
- loaded instance should be created by DT phandle.
-
- For example of getting DT phandle from /chosen and creating instance:
- chosen_node = ofnode_path("/chosen");
- if (!ofnode_valid(chosen_node)) {
- debug("/chosen node was not found.\n");
- return -ENOENT;
- }
-
- phandle_p = ofnode_get_property(chosen_node, "firmware-loader", &size);
- if (!phandle_p) {
- debug("firmware-loader property was not found.\n");
- return -ENOENT;
- }
-
- phandle = fdt32_to_cpu(*phandle_p);
- ret = uclass_get_device_by_phandle_id(UCLASS_FS_FIRMWARE_LOADER,
- phandle, &dev);
- if (ret)
- return ret;
-
- Firmware loader driver is also designed to support U-boot environment
- variables, so all these data from FDT can be overwritten
- through the U-boot environment variable during run time.
- For examples:
- "storage_interface" - Storage interface, it can be "mmc", "usb", "sata"
- or "ubi".
- "fw_dev_part" - Block device number and its partition, it can be "0:1".
- "fw_ubi_mtdpart" - UBI device mtd partition, it can be "UBI".
- "fw_ubi_volume" - UBI volume, it can be "ubi0".
-
- When above environment variables are set, environment values would be
- used instead of data from FDT.
- The benefit of this design allows user to change storage attribute data
- at run time through U-boot console and saving the setting as default
- environment values in the storage for the next power cycle, so no
- compilation is required for both driver and FDT.
-
-File system firmware Loader API
--------------------------------
-
-int request_firmware_into_buf(struct udevice *dev,
- const char *name,
- void *buf, size_t size, u32 offset)
---------------------------------------------------------------------
-Load firmware into a previously allocated buffer
-
-Parameters:
-
-1. struct udevice *dev
- An instance of a driver
-
-2. const char *name
- name of firmware file
-
-3. void *buf
- address of buffer to load firmware into
-
-4. size_t size
- size of buffer
-
-5. u32 offset
- offset of a file for start reading into buffer
-
-return:
- size of total read
- -ve when error
-
-Description:
- The firmware is loaded directly into the buffer pointed to by buf
-
-Example of calling request_firmware_into_buf API after creating firmware loader
-instance:
- ret = uclass_get_device_by_phandle_id(UCLASS_FS_FIRMWARE_LOADER,
- phandle, &dev);
- if (ret)
- return ret;
-
- request_firmware_into_buf(dev, filename, buffer_location, buffer_size,
- offset_ofreading);
diff --git a/doc/driver-model/index.rst b/doc/driver-model/index.rst
index 71ad062..6b8f181 100644
--- a/doc/driver-model/index.rst
+++ b/doc/driver-model/index.rst
@@ -8,4 +8,5 @@ Driver Model
design
fdt-fixup
+ fs_firmware_loader
migration
--
2.7.4
More information about the U-Boot
mailing list