[U-Boot] [RFC 0/4] Convert fsl_dcu_fb to DM_VIDEO

[Igor Opaniuk]

+ Oleksandr, Philippe

On Mon, Jun 10, 2019 at 2:47 PM Igor Opaniuk <igor.opaniuk at gmail.com> wrote:
>
> From: Igor Opaniuk <igor.opaniuk at toradex.com>
>
> This series of patches refactors and extends NXP DCU video driver to
> be built with DM_VIDEO enabled. DTS files must additionally include
> 'u-boot,dm-pre-reloc' property in soc and child nodes to enable driver
> binding to fsl_dcu_fb device.
>
> Current limitations: configuration (display timings etc.) isn't fetched
> from the DT node. I plan to add this in the next series.
>
> Also enables DM_VIDEO by default for Colibri VF.
>
>
> Igor Opaniuk (4):
>   video: fsl_dcu_fb: refactor init functions
>   video: fsl_dcu_fb: add DM_VIDEO support
>   ARM: dts: colibri_vf: Add dcu0 node
>   colibri_vf: enable DM_VIDEO
>
>  arch/arm/dts/vf-colibri-u-boot.dtsi   |   4 +
>  arch/arm/dts/vf-colibri.dtsi          |   5 +
>  arch/arm/dts/vf.dtsi                  |   6 +
>  board/freescale/ls1021aqds/dcu.c      |   6 +-
>  board/toradex/colibri_vf/colibri_vf.c |   4 +-
>  board/toradex/colibri_vf/dcu.c        |   6 +-
>  configs/colibri_vf_defconfig          |   2 +-
>  drivers/video/Kconfig                 |   2 +-
>  drivers/video/fsl_dcu_fb.c            | 213 ++++++++++++++++++--------
>  include/fsl_dcu_fb.h                  |  12 +-
>  10 files changed, 187 insertions(+), 73 deletions(-)
>
> --
> 2.17.1
>


-- 
Best regards - Freundliche Grüsse - Meilleures salutations

Igor Opaniuk

mailto: igor.opaniuk at gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk