[U-Boot] [PATCH 0/3] amlogic: Add support for Odroid-N2

[Mark Kettenis]

> From: Neil Armstrong <narmstrong at baylibre.com>
> Date: Wed, 31 Jul 2019 09:18:10 +0200
> 
> On 29/07/2019 15:45, Neil Armstrong wrote:
> > ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd
> > with the following specifications:
> > 
> >  - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
> >  - 4GB DDR4 SDRAM
> >  - Gigabit Ethernet
> >  - HDMI 2.1 4K/60Hz display
> >  - 40-pin GPIO header
> >  - 4 x USB 3.0 Host, 1 x USB OTG
> >  - eMMC, microSD
> >  - Infrared receiver
> > 
> > This patchset :
> > - adds the Odroid-N2 from Linux 5.3-rc1
> > - fixes 4GiB memory support
> > - adds board support
> > 
> > The board directory is W400, the name of the Amlogic Reference Design
> > of Amlogic G12B with Gigabit boards, which will be used for similar
> > boards.
> > 
> > Changes since v1:
> > - Fix typo in README.odroid-n2
> > 
> > Neil Armstrong (3):
> >   ARM: dts: add support for Odroid-N2
> >   ARM: meson-g12a: Handle 4GiB DRAM size
> >   board: amlogic: add support for Odroid-N2
> > 
> >  arch/arm/dts/Makefile                         |   3 +-
> >  arch/arm/dts/meson-g12b-odroid-n2.dts         | 386 ++++++++++++++++++
> >  arch/arm/dts/meson-g12b.dtsi                  |  82 ++++
> >  arch/arm/mach-meson/board-g12a.c              |  13 +-
> >  board/amlogic/w400/MAINTAINERS                |   6 +
> >  board/amlogic/w400/Makefile                   |   6 +
> >  board/amlogic/w400/README.odroid-n2           | 130 ++++++
> >  board/amlogic/w400/README.w400                | 130 ++++++
> >  board/amlogic/w400/w400.c                     |  18 +
> >  configs/odroid-n2_defconfig                   |  56 +++
> >  .../dt-bindings/sound/meson-g12a-tohdmitx.h   |  13 +
> >  11 files changed, 836 insertions(+), 7 deletions(-)
> >  create mode 100644 arch/arm/dts/meson-g12b-odroid-n2.dts
> >  create mode 100644 arch/arm/dts/meson-g12b.dtsi
> >  create mode 100644 board/amlogic/w400/MAINTAINERS
> >  create mode 100644 board/amlogic/w400/Makefile
> >  create mode 100644 board/amlogic/w400/README.odroid-n2
> >  create mode 100644 board/amlogic/w400/README.w400
> >  create mode 100644 board/amlogic/w400/w400.c
> >  create mode 100644 configs/odroid-n2_defconfig
> >  create mode 100644 include/dt-bindings/sound/meson-g12a-tohdmitx.h
> > 
> 
> Applied on u-boot-amlogic

FWIW, this made it possible for me to finally build a U-Boot with UEFI
support that can run the OpenBSD bootloader and kernel.  Now I just
need to finish writing the device drivers for the Amlogic-specific
hardware blocks ;).

So, feel free to add:

  Tested-by: Mark Kettenis <kettenis at openbsd.org>

if for some reason you need to respin the series