[U-Boot] [PATCH v3 3/3] ARM: imx6: DHCOM i.MX6 PDK: config SPL to load U-Boot fitImage with mulitple DTs

[Marek Vasut]

On 7/2/19 2:49 PM, Ludwig Zenz wrote:
> Configure fitImage for U-Boot with a device tree for imx6 quad/dual
> and duallite/solo. This enables to support the imx6 derivates
> quad/dual/duallite/solo with a single binary.
> 
> Signed-off-by: Ludwig Zenz <lzenz at dh-electronics.com>
> ---
> Changes in v3:
> 	- No change
> Changes in v2:
> 	- remove CONFIG_SPL_LOAD_FIT from dh_imx6_defconfig
> 	- remove board_fit_config_name_match from dh_imx6_spl.c

Reviewed-by: Marek Vasut <marex at denx.de>