[U-Boot] [PATCH v2 3/8] x86: slimbootloader: Add memory configuration

Bin Meng bmeng.cn at gmail.com
Tue Jul 2 14:13:26 UTC 2019


Hi Aiden,

On Wed, Jun 26, 2019 at 7:18 AM Park, Aiden <aiden.park at intel.com> wrote:
>
> - Get memory size from the memory map info hob
> - Set ram top for U-Boot relocation lower than 4GB
> - Provide e820 entries from the memory map info hob
>
> Signed-off-by: Aiden Park <aiden.park at intel.com>
> ---
>  arch/x86/cpu/slimbootloader/Makefile          |   2 +-
>  arch/x86/cpu/slimbootloader/dram.c            | 139 ++++++++++++++++++
>  .../asm/arch-slimbootloader/slimbootloader.h  |  38 +++++
>  3 files changed, 178 insertions(+), 1 deletion(-)
>  create mode 100644 arch/x86/cpu/slimbootloader/dram.c
>
> diff --git a/arch/x86/cpu/slimbootloader/Makefile b/arch/x86/cpu/slimbootloader/Makefile
> index 620fc8a139..4b0b3e71c9 100644
> --- a/arch/x86/cpu/slimbootloader/Makefile
> +++ b/arch/x86/cpu/slimbootloader/Makefile
> @@ -2,4 +2,4 @@
>  #
>  # Copyright (C) 2019 Intel Corporation <www.intel.com>
>
> -obj-y += car.o slimbootloader.o hob.o
> +obj-y += car.o slimbootloader.o hob.o dram.o
> diff --git a/arch/x86/cpu/slimbootloader/dram.c b/arch/x86/cpu/slimbootloader/dram.c
> new file mode 100644
> index 0000000000..1defdad1c9
> --- /dev/null
> +++ b/arch/x86/cpu/slimbootloader/dram.c
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Intel Corporation <www.intel.com>
> + */
> +
> +#include <common.h>
> +#include <linux/sizes.h>
> +#include <asm/e820.h>
> +#include <asm/arch/slimbootloader.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/**
> + * This returns a data pointer of memory map info from the guid hob.
> + *
> + * @return: A data pointer of memory map info hob
> + */
> +static void *get_memory_map_info(void)
> +{
> +       const struct efi_guid guid = LOADER_MEMORY_MAP_INFO_GUID;
> +
> +       return get_next_guid_hob_data(&guid, gd->arch.hob_list);
> +}
> +
> +/**
> + * This is to give usable memory region information for u-boot relocation.
> + * so search usable memory region lower than 4GB.
> + * The memory map entries from Slim Bootloader hob are already sorted.
> + *
> + * @total_size: The memory size that u-boot occupies
> + * @return    : The top available memory address lower than 4GB
> + */
> +ulong board_get_usable_ram_top(ulong total_size)
> +{
> +       struct memory_map_info *data = NULL;
> +       int i = 0;
> +       phys_addr_t addr_start = 0;
> +       phys_addr_t addr_end = 0;
> +       ulong ram_top = 0;
> +
> +       data = (struct memory_map_info *)get_memory_map_info();
> +       if (!data)
> +               panic("memory map info hob not found\n");
> +
> +       /* sorted memory map entries, so reversed search */
> +       for (i = data->count - 1; i >= 0; i--) {
> +               if (data->entry[i].type != E820_RAM)
> +                       continue;
> +
> +               addr_start = data->entry[i].addr;
> +               addr_end = addr_start + data->entry[i].size;
> +
> +               if (addr_start > SZ_4G)
> +                       continue;
> +
> +               if (addr_end > SZ_4G)
> +                       addr_end = SZ_4G;
> +
> +               if (addr_end < total_size)
> +                       continue;
> +
> +               /* to relocate u-boot at 4K aligned memory */
> +               addr_end = rounddown(addr_end - total_size, SZ_4K);
> +               if (addr_end >= addr_start) {
> +                       ram_top = (ulong)addr_end + total_size;
> +                       break;
> +               }
> +       }
> +
> +       if (!ram_top)
> +               panic("failed to find available memory for relocation!");
> +
> +       return ram_top;
> +}
> +
> +/**
> + * The memory initialization has already been done in previous Slim Bootloader
> + * stage thru FSP-M. Instead, this sets the ram_size from the memory map info
> + * hob.

Is the memory map info created by the FSP, or created by the slim
bootloader? If it is created by newer FSPs, I think such function is
eligible for FSP based board to use in the future.

> + */
> +int dram_init(void)
> +{
> +       struct memory_map_info *data = NULL;
> +       int i = 0;
> +       phys_size_t ram_size = 0;
> +
> +       data = (struct memory_map_info *)get_memory_map_info();
> +       if (!data)
> +               panic("memory map info hob not found\n");
> +
> +       /* sorted memory map entries, so reversed search */
> +       for (i = data->count - 1; i >= 0; i--) {
> +               if (data->entry[i].type != E820_RAM)
> +                       continue;
> +
> +               /* simply use the highest usable memory address as ram size */

This indicates the memory map info is sorted, from highest address to
lowest address. Need some comments.

> +               ram_size = data->entry[i].addr + data->entry[i].size;
> +               break;
> +       }
> +
> +       if (!ram_size)
> +               panic("failed to detect memory size");
> +
> +       gd->ram_size = ram_size;
> +       return 0;
> +}
> +
> +int dram_init_banksize(void)
> +{
> +       /* simply use a single bank to have whole size for now */
> +       if (CONFIG_NR_DRAM_BANKS) {
> +               gd->bd->bi_dram[0].start = 0;
> +               gd->bd->bi_dram[0].size = gd->ram_size;
> +       }
> +       return 0;
> +}
> +
> +unsigned int install_e820_map(unsigned int max_entries,
> +                             struct e820_entry *entries)
> +{
> +       struct memory_map_info *data = NULL;
> +       int i = 0;
> +       unsigned int num_entries = 0;
> +
> +       data = (struct memory_map_info *)get_memory_map_info();
> +       if (!data) {
> +               debug("memory map info hob not found\n");
> +               return 0;
> +       }
> +
> +       for (i = 0; i < data->count; i++) {
> +               entries[num_entries].addr = data->entry[i].addr;
> +               entries[num_entries].size = data->entry[i].size;
> +               entries[num_entries].type = data->entry[i].type;
> +               num_entries++;
> +       }
> +
> +       return num_entries;
> +}
> diff --git a/arch/x86/include/asm/arch-slimbootloader/slimbootloader.h b/arch/x86/include/asm/arch-slimbootloader/slimbootloader.h
> index bd1f4ee374..c85201e711 100644
> --- a/arch/x86/include/asm/arch-slimbootloader/slimbootloader.h
> +++ b/arch/x86/include/asm/arch-slimbootloader/slimbootloader.h
> @@ -10,6 +10,44 @@
>  #include <asm/fsp/fsp_types.h>
>  #include <asm/fsp/fsp_hob.h>
>
> +#define LOADER_MEMORY_MAP_INFO_GUID \
> +       { \
> +       0xa1ff7424, 0x7a1a, 0x478e, \
> +       { 0xa9, 0xe4, 0x92, 0xf3, 0x57, 0xd1, 0x28, 0x32 } \
> +       }
> +
> +/**
> + * A single entry of memory map information
> + *
> + * @addr: start address of a memory map entry
> + * @size: size of a memory map entry
> + * @type: ram:1, reserved:2, acpi:3, nvs:4, unusable:5
> + * @flag: only used in Slim Bootloader
> + * @rsvd: padding for alignment
> + */
> +struct memory_map_entry {
> +       phys_addr_t     addr;
> +       phys_size_t     size;
> +       u8      type;
> +       u8      flag;
> +       u8      rsvd[6];
> +} __packed;
> +
> +/**
> + * This includes all memory map entries which are sorted.
> + *
> + * @rev  : revision of memory_map_info structure. currently 1.
> + * @rsvd : padding for alignment
> + * @count: the number of memory map entries
> + * @entry: array of all memory map entries
> + */
> +struct memory_map_info {
> +       u8      rev;
> +       u8      rsvd[3];
> +       u32     count;
> +       struct memory_map_entry entry[0];
> +} __packed;
> +
>  /**
>   * This returns a pointer to hob data buffer if the given guid hob is found.
>   *

Regards,
Bin


More information about the U-Boot mailing list