[U-Boot] [PATCH 3/4] SDP: fix wrong usb request size and add high speed endpoint descriptor

sherry sun sherry.sun at nxp.com
Thu Jul 18 01:40:55 UTC 2019


From: Sherry Sun <sherry.sun at nxp.com>

Because the buffer length of sdp usb request is 65, we have to allocate
65 bytes not 64 bytes. Otherwise there is potential buffer overflow.

So the wMaxPacketSize of fullspeed can't meet the needs. Add HS
endpoint descriptor for SDP. Then we can use high speed endpoint,
and the SDP device can send packet with 512 byte size.

Signed-off-by: Sherry Sun <sherry.sun at nxp.com>
Signed-off-by: Ye Li <ye.li at nxp.com>
---
 drivers/usb/gadget/f_sdp.c | 33 ++++++++++++++++++++++++++++++---
 1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c
index b1601575e0..532041063a 100644
--- a/drivers/usb/gadget/f_sdp.c
+++ b/drivers/usb/gadget/f_sdp.c
@@ -157,6 +157,16 @@ static struct usb_endpoint_descriptor in_desc = {
 	.bInterval =		1,
 };
 
+static struct usb_endpoint_descriptor in_hs_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT, /*USB_DT_CS_ENDPOINT*/
+
+	.bEndpointAddress =	1 | USB_DIR_IN,
+	.bmAttributes =	USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	512,
+	.bInterval =		1,
+};
+
 static struct usb_descriptor_header *sdp_runtime_descs[] = {
 	(struct usb_descriptor_header *)&sdp_intf_runtime,
 	(struct usb_descriptor_header *)&sdp_hid_desc,
@@ -164,6 +174,13 @@ static struct usb_descriptor_header *sdp_runtime_descs[] = {
 	NULL,
 };
 
+static struct usb_descriptor_header *sdp_runtime_hs_descs[] = {
+	(struct usb_descriptor_header *)&sdp_intf_runtime,
+	(struct usb_descriptor_header *)&sdp_hid_desc,
+	(struct usb_descriptor_header *)&in_hs_desc,
+	NULL,
+};
+
 /* This is synchronized with what the SoC implementation reports */
 static struct hid_report sdp_hid_report = {
 	.usage_page = {
@@ -489,6 +506,11 @@ static int sdp_bind(struct usb_configuration *c, struct usb_function *f)
 		goto error;
 	}
 
+	if (gadget_is_dualspeed(gadget)) {
+		/* Assume endpoint addresses are the same for both speeds */
+		in_hs_desc.bEndpointAddress = in_desc.bEndpointAddress;
+	}
+
 	sdp->in_ep = ep; /* Store IN EP for enabling @ setup */
 
 	cdev->req->context = sdp;
@@ -526,7 +548,7 @@ static struct usb_request *sdp_start_ep(struct usb_ep *ep)
 {
 	struct usb_request *req;
 
-	req = alloc_ep_req(ep, 64);
+	req = alloc_ep_req(ep, 65);
 	debug("%s: ep:%p req:%p\n", __func__, ep, req);
 
 	if (!req)
@@ -541,11 +563,15 @@ static int sdp_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 {
 	struct f_sdp *sdp = func_to_sdp(f);
 	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_gadget *gadget = cdev->gadget;
 	int result;
 
 	debug("%s: intf: %d alt: %d\n", __func__, intf, alt);
 
-	result = usb_ep_enable(sdp->in_ep, &in_desc);
+	if (gadget_is_dualspeed(gadget) && gadget->speed == USB_SPEED_HIGH)
+		result = usb_ep_enable(sdp->in_ep, &in_hs_desc);
+	else
+		result = usb_ep_enable(sdp->in_ep, &in_desc);
 	if (result)
 		return result;
 	sdp->in_req = sdp_start_ep(sdp->in_ep);
@@ -591,7 +617,7 @@ static int sdp_bind_config(struct usb_configuration *c)
 	memset(sdp_func, 0, sizeof(*sdp_func));
 
 	sdp_func->usb_function.name = "sdp";
-	sdp_func->usb_function.hs_descriptors = sdp_runtime_descs;
+	sdp_func->usb_function.hs_descriptors = sdp_runtime_hs_descs;
 	sdp_func->usb_function.descriptors = sdp_runtime_descs;
 	sdp_func->usb_function.bind = sdp_bind;
 	sdp_func->usb_function.unbind = sdp_unbind;
@@ -724,6 +750,7 @@ static void sdp_handle_in_ep(struct spl_image_info *spl_image)
 			/* In SPL, allow jumps to U-Boot images */
 			struct spl_image_info spl_image = {};
 			spl_parse_image_header(&spl_image, header);
+
 			jump_to_image_no_args(&spl_image);
 #else
 			/* In U-Boot, allow jumps to scripts */
-- 
2.17.1



More information about the U-Boot mailing list