[U-Boot] [PATCH v2] arm: socfpga: gen5: don't zero bss in board_init_f()

[Simon Goldschmidt]

The socfpga gen5 SPL manually zeroed bss in board_init_f(). Now that the
DDR driver does not use bss any more, bss is not used before board_init_r()
and we can remove this hack.

bss is normally zeroed by crt0.S, but after board_init_f(), before
board_init_r(). socfpga just had this double-zeroing because it invalidly
used bss in board_init_f() already (during DDR initialization).

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
---

Changes in v2:
- removed patch 1/2 from v1 (already applied)
- improved commit message in this patch

 arch/arm/mach-socfpga/spl_gen5.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/mach-socfpga/spl_gen5.c b/arch/arm/mach-socfpga/spl_gen5.c
index 87b76b47de..47e63709ad 100644
--- a/arch/arm/mach-socfpga/spl_gen5.c
+++ b/arch/arm/mach-socfpga/spl_gen5.c
@@ -79,8 +79,6 @@ void board_init_f(ulong dummy)
 		writel(SYSMGR_ECC_OCRAM_DERR  | SYSMGR_ECC_OCRAM_EN,
 		       &sysmgr_regs->eccgrp_ocram);
 
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
 	socfpga_sdram_remap_zero();
 	socfpga_pl310_clear();
 
-- 
2.20.1