[U-Boot] [PATCH v2 02/11] Makefile: support building SPL FIT images without device trees

[Lukas Auer]

When building a U-Boot FIT image, the device trees specified by the
board are unconditionally built for inclusion in the FIT image. However,
not all device tree providers, such as CONFIG_OF_PRIOR_STAGE, require a
device tree to be built and bundled with the U-Boot binary. They rely on
other mechanisms to provide the device tree to U-Boot. Compilation on
boards with these device tree providers fails, because they do not
specify a device tree.

Change the makefile rules to conditionally build the device trees if
either CONFIG_OF_SEPARATE or CONFIG_OF_EMBED is selected as device tree
provider.

Signed-off-by: Lukas Auer <lukas.auer at aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Tested-by: Bin Meng <bmeng.cn at gmail.com>
---

Changes in v2: None

 Makefile | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/Makefile b/Makefile
index 704579bec1..84678b2c47 100644
--- a/Makefile
+++ b/Makefile
@@ -1263,7 +1263,9 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 		-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
 
 u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
-		$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
+		$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
+			$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED),dts/dt.dtb) \
+		,u-boot.bin) FORCE
 	$(call if_changed,mkimage)
 	$(BOARD_SIZE_CHECK)
 
@@ -1273,7 +1275,9 @@ else
 MKIMAGEFLAGS_u-boot.itb = -E
 endif
 
-u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
+u-boot.itb: u-boot-nodtb.bin \
+		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED),dts/dt.dtb) \
+		$(U_BOOT_ITS) FORCE
 	$(call if_changed,mkfitimage)
 	$(BOARD_SIZE_CHECK)
 
-- 
2.21.0