[U-Boot] [PATCH 2/2] configs: j721e_evm_a72: Disable K3_SYSTEM_CONTROLLER

[Suman Anna]

The K3 System Controller driver is used for loading and starting
the System Firmware, and is used only on R5 SPL. It need not be
enabled and built for the A72 U-Boot and SPL, so disable it from
the j721e_evm_a72 defconfig.

While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and
CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A72 SPL.

Signed-off-by: Suman Anna <s-anna at ti.com>
---
 configs/j721e_evm_a72_defconfig | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig
index 237dc6b601e2..917e33d68306 100644
--- a/configs/j721e_evm_a72_defconfig
+++ b/configs/j721e_evm_a72_defconfig
@@ -28,13 +28,11 @@ CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_REMOTEPROC=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
-CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_SF=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
@@ -73,7 +71,6 @@ CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_POWER_DOMAIN=y
 CONFIG_TI_SCI_POWER_DOMAIN=y
-CONFIG_K3_SYSTEM_CONTROLLER=y
 CONFIG_DM_RESET=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_DM_SERIAL=y
-- 
2.22.0