[U-Boot] [PATCH 13/47] powerpc: T102xRDB: Disable legacy PCIe driver when DM_PCI is enabled

Hou Zhiqiang Zhiqiang.Hou at nxp.com
Tue Jul 23 13:09:04 UTC 2019


Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
 include/configs/T102xRDB.h | 54 +++++++++++++---------------------------------
 1 file changed, 15 insertions(+), 39 deletions(-)

diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 3715e25..4fb1709 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -500,72 +500,48 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 #define CONFIG_PCIE2		/* PCIE controller 2 */
 #define CONFIG_PCIE3		/* PCIE controller 3 */
-#define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
-#define CONFIG_PCI_INDIRECT_BRIDGE
 
 #ifdef CONFIG_PCI
 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 #ifdef CONFIG_PCIE1
 #define	CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
-#ifdef CONFIG_PHYS_64BIT
-#define	CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
 #define	CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
-#else
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
-#endif
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
 #define CONFIG_SYS_PCIE1_IO_VIRT	0xf8000000
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xff8000000ull
-#else
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xf8000000
-#endif
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
 #endif
 
 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 #ifdef CONFIG_PCIE2
 #define CONFIG_SYS_PCIE2_MEM_VIRT	0x90000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xc10000000ull
-#else
-#define CONFIG_SYS_PCIE2_MEM_BUS	0x90000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0x90000000
-#endif
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000	/* 256M */
 #define CONFIG_SYS_PCIE2_IO_VIRT	0xf8010000
-#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
-#ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE2_IO_PHYS	0xff8010000ull
-#else
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xf8010000
-#endif
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
 #endif
 
 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 #ifdef CONFIG_PCIE3
 #define CONFIG_SYS_PCIE3_MEM_VIRT	0xa0000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
 #define CONFIG_SYS_PCIE3_MEM_PHYS	0xc20000000ull
-#else
-#define CONFIG_SYS_PCIE3_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS	0xa0000000
-#endif
-#define CONFIG_SYS_PCIE3_MEM_SIZE	0x10000000	/* 256M */
 #define CONFIG_SYS_PCIE3_IO_VIRT	0xf8020000
-#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
-#ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE3_IO_PHYS	0xff8020000ull
-#else
-#define CONFIG_SYS_PCIE3_IO_PHYS	0xf8020000
 #endif
+
+#if !defined(CONFIG_DM_PCI)
+#define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000 /* 256M */
+#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
+#define CONFIG_SYS_PCIE3_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
 #define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_PCI_INDIRECT_BRIDGE
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-- 
2.9.5



More information about the U-Boot mailing list