[U-Boot] [PATCH 2/4] configs: ls1028aqds: Enable DM support for pcf2127 rtc

[Chuanhua Han]

Enable related configs on all ls1028aqds boards to support pcf2127
rtc DM function.

Signed-off-by: Chuanhua Han <chuanhua.han at nxp.com>
---
depends on:
	- http://patchwork.ozlabs.org/project/uboot/list/?series=117203
	- http://patchwork.ozlabs.org/project/uboot/list/?series=117224
	- http://patchwork.ozlabs.org/project/uboot/list/?series=118231

 configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 11 ++++++++++-
 configs/ls1028aqds_tfa_defconfig             | 11 ++++++++++-
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
index 7cd2f59..5f66b55 100644
--- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028AQDS=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SECURE_BOOT=y
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_TFABOOT=y
@@ -8,7 +9,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -60,3 +60,12 @@ CONFIG_WDT=y
 CONFIG_WDT_SP805=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig
index 7982ce4..d221624 100644
--- a/configs/ls1028aqds_tfa_defconfig
+++ b/configs/ls1028aqds_tfa_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028AQDS=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_TFABOOT=y
 CONFIG_NR_DRAM_BANKS=2
@@ -7,7 +8,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -63,3 +63,12 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
-- 
2.9.5