[U-Boot] [PATCH 13/16] dts: bcm2838-rpi-4-b: Use the emmc2 interface for sdhci

[andrei at gherzan.ro]

From: Andrei Gherzan <andrei at balena.io>

Signed-off-by: Andrei Gherzan <andrei at balena.io>
---
 arch/arm/dts/bcm2838-rpi-4-b.dts | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/arch/arm/dts/bcm2838-rpi-4-b.dts b/arch/arm/dts/bcm2838-rpi-4-b.dts
index 07e9a78e8d..168179c17c 100644
--- a/arch/arm/dts/bcm2838-rpi-4-b.dts
+++ b/arch/arm/dts/bcm2838-rpi-4-b.dts
@@ -30,21 +30,17 @@
 	status = "okay";
 };
 
-/* SDHCI is used to control the SDIO for wireless */
 &sdhci {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
-	status = "okay";
-	bus-width = <4>;
-	non-removable;
+	status = "disabled";
 };
 
-/* SDHOST is used to drive the SD card */
 &sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
+	status = "disabled";
+};
+
+&emmc2 {
+	compatible = "brcm,bcm2835-sdhci";
 	status = "okay";
-	bus-width = <4>;
 };
 
 &gpio {
-- 
2.22.0