[U-Boot] [PATCH 12/16] config: rpi4: Add defconfig for rpi4-32

[Peter Robinson]

On Tue, Jul 16, 2019 at 3:25 PM Matthias Brugger <matthias.bgg at gmail.com> wrote:
>
>
>
> On 16/07/2019 15:37, andrei at gherzan.ro wrote:
> > From: Andrei Gherzan <andrei at balena.io>
> >
> > Signed-off-by: Andrei Gherzan <andrei at balena.io>
> > ---
> >  configs/rpi_4_32b_defconfig | 43 +++++++++++++++++++++++++++++++++++++
> >  1 file changed, 43 insertions(+)
> >  create mode 100644 configs/rpi_4_32b_defconfig
> >
> > diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig
> > new file mode 100644
> > index 0000000000..9f2b805d0f
> > --- /dev/null
> > +++ b/configs/rpi_4_32b_defconfig
> > @@ -0,0 +1,43 @@
> > +CONFIG_ARM=y
> > +CONFIG_ARCH_BCM283X=y
> > +CONFIG_SYS_TEXT_BASE=0x00008000
> > +CONFIG_TARGET_RPI_4_32B=y
> > +CONFIG_SYS_MALLOC_F_LEN=0x2000
> > +CONFIG_DISTRO_DEFAULTS=y
> > +CONFIG_NR_DRAM_BANKS=1
> > +CONFIG_OF_BOARD_SETUP=y
> > +CONFIG_MISC_INIT_R=y
> > +# CONFIG_DISPLAY_CPUINFO is not set
> > +# CONFIG_DISPLAY_BOARDINFO is not set
> > +CONFIG_SYS_PROMPT="U-Boot> "
> > +# CONFIG_CMD_FLASH is not set
> > +CONFIG_CMD_GPIO=y
> > +CONFIG_CMD_MMC=y
> > +CONFIG_CMD_USB=y
> > +CONFIG_CMD_FS_UUID=y
> > +CONFIG_OF_EMBED=y
> > +CONFIG_DEFAULT_DEVICE_TREE="bcm2838-rpi-4-b"
> > +CONFIG_ENV_FAT_INTERFACE="mmc"
> > +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
> > +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> > +CONFIG_DM_KEYBOARD=y
> > +CONFIG_DM_MMC=y
> > +CONFIG_MMC_SDHCI=y
> > +CONFIG_MMC_SDHCI_BCM2835=y
> > +CONFIG_PHYLIB=y
> > +CONFIG_DM_ETH=y
> > +CONFIG_PINCTRL=y
> > +# CONFIG_PINCTRL_GENERIC is not set
> > +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
> > +CONFIG_USB=y
> > +CONFIG_DM_USB=y
> > +CONFIG_USB_DWC2=y
> > +CONFIG_USB_KEYBOARD=y
> > +CONFIG_USB_HOST_ETHER=y
> > +CONFIG_USB_ETHER_LAN78XX=y
> > +CONFIG_USB_ETHER_SMSC95XX=y
>
> Network is connected via PCI, why do we need this options here?

Network is attached to a PHY not via PCI, that would be the USB.

It seems they're removed in patch 15 but the two should be squashed together.

> > +CONFIG_DM_VIDEO=y
> > +CONFIG_SYS_WHITE_ON_BLACK=y
> > +CONFIG_CONSOLE_SCROLL_LINES=10
> > +CONFIG_PHYS_TO_BUS=y
> > +CONFIG_OF_LIBFDT_OVERLAY=y
> >
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot